Study guide

8.6 Deflection of Beams: Double Integration, Macaulay & Moment-Area

Coal India Management Trainee CIL MT

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: CIL MT Exam Overview & Coal Sector Landscape

1.1 CIL MT Exam Pattern, Marking Scheme & Strategy 1.2 Coal India Limited: Corporate Structure, Maharatna Status & Subsidiaries 1.3 Indian Coal Mining Sector, Energy Mix & Environmental Regulations

2 Chapter 2: Paper-I General Awareness, Polity & Current Affairs

2.1 Indian Constitution, Governance & Statutory Bodies 2.2 Indian Economy, Union Budget & Economic Planning 2.3 Indian Geography, Mineral Belts & Environmental Ecology 2.4 Modern Indian History, Freedom Struggle & Cultural Heritage 2.5 General Science: Physics, Chemistry & Biology Fundamentals 2.6 Inventions, Discoveries & Scientific-Technological Development 2.7 Uses of Internet, Computer Awareness & Digital Governance 2.8 National & International Organisations 2.9 Awards, Honours & Sports 2.10 Books & Authors, Important Monuments & Places of India 2.11 Ports, Power Plants & Infrastructure of India 2.12 Climate Change, SDGs, National Parks & Wildlife Sanctuaries 2.13 Flagship Government Programmes & Current Affairs Method 2.14 World Physical, Social & Economic Geography

3 Chapter 3: Paper-I Reasoning & Logical Ability

3.1 Series Completion, Coding-Decoding & Semantic Analogies 3.2 Syllogisms, Logical Deduction & Venn Diagrams 3.3 Seating Arrangements, Linear/Circular Alignments & Puzzles 3.4 Direction Sense, Blood Relations & Order/Ranking 3.5 Alphabetical & Alphanumeric Series 3.6 Statement & Conclusions, Statement & Arguments 3.7 Clocks & Calendars 3.8 Cubes, Dice & Figure Counting 3.9 Mirror Images, Water Images, Embedded Figures & Non-Verbal Series 3.10 Decision Making & Data Analysis in Reasoning

4 Chapter 4: Paper-I Numerical Ability & Quantitative Aptitude

4.1 Arithmetic Foundations: Percentages, Profit & Loss, Ratio & Proportion 4.2 Averages, Simple/Compound Interest, Alligations & Mixtures 4.3 Time & Work, Pipes & Cisterns, Time, Speed & Distance 4.4 Algebra, Mensuration, Geometry & Data Interpretation (DI) 4.5 Number System, LCM, HCF & Decimal Fractions 4.6 Surds, Indices & Simplification 4.7 Problems on Ages 4.8 Boats & Streams and Problems on Trains 4.9 Permutations & Combinations 4.10 Probability for Quantitative Aptitude

5 Chapter 5: Paper-I General English & Verbal Ability

5.1 English Grammar, Error Spotting & Sentence Correction 5.2 Vocabulary Building: Synonyms, Antonyms, Idioms & Phrases 5.3 Reading Comprehension, Cloze Tests & Para Jumbles 5.4 Fill in the Blanks, Cloze Passages & Sentence Completion 5.5 Jumbled Sentences & Sentence Improvement

6 Chapter 6: Paper-II Engineering Mathematics

6.1 Matrix Algebra, Rank & Systems of Linear Equations 6.2 Eigenvalues, Eigenvectors & the Cayley-Hamilton Theorem 6.3 Limits, Continuity, Differentiability & Mean Value Theorems 6.4 Maxima-Minima, Indeterminate Forms & Taylor Series 6.5 Definite, Improper, Double & Triple Integrals 6.6 Partial Derivatives, Total Derivative & Multivariable Optimisation 6.7 First-Order Differential Equations: Linear & Non-Linear 6.8 Higher-Order Linear Differential Equations & Engineering Applications 6.9 Laplace Transforms & Transfer-Function Methods 6.10 Probability, Conditional Probability & Bayes' Theorem 6.11 Random Variables, Distributions & Descriptive Statistics 6.12 Numerical Methods: Root Finding, Integration & ODE Solvers

7 Chapter 7: Paper-II Engineering Mechanics & Statics-Dynamics

7.1 Force Systems, Coplanar Equilibrium & Lami's Theorem 7.2 Plane Trusses, Friction Mechanics & Screws/Wedges 7.3 Centroids, Center of Gravity & Moment of Inertia 7.4 Kinematics, Kinetics of Particles & Rigid Body Dynamics 7.5 Virtual Work & Lagrange's Equation 7.6 Rolling Friction, Belt-Pulley Drives, Brakes, Clutches & Vehicle Dynamics

8 Chapter 8: Paper-II Mechanics of Materials & Structural Integrity

8.1 Simple Stresses, Strains, Elastic Moduli & Thermal Stresses 8.2 Principal Stresses, Strain Energy & Mohr's Circle 8.3 Shear Force & Bending Moment Diagrams, Beam Bending & Shear Stresses 8.4 Torsion of Circular Shafts, Springs & Column Buckling 8.5 Thin Cylinders, Spheres & Thick-Walled Pressure Vessels 8.6 Deflection of Beams: Double Integration, Macaulay & Moment-Area 8.7 Shear Centre & Unsymmetrical Bending 8.8 Strain Gauges, Rosettes & Experimental Stress Analysis 8.9 Mechanical Testing: Universal Testing Machine, Hardness & Impact

9 Chapter 9: Paper-II Theory of Machines & Mechanical Vibrations

9.1 Simple Mechanisms, Kinematic Inversions & Velocity/Acceleration Diagrams 9.2 Cams & Followers, Toothed Gearing & Epicyclic Gear Trains 9.3 Flywheels, Centrifugal/Inertia Governors & Rotor Balancing 9.4 Free, Damped & Forced Single-Degree-of-Freedom Vibrations 9.5 Gyroscopic Couple & Gyroscopic Effects

10 Chapter 10: Paper-II Machine Design & Failure Theories

10.1 Static Failure Theories & Variable/Fatigue Loading 10.2 Design of Threaded Fasteners, Welded & Riveted Joints 10.3 Design of Shafts, Keys, Couplings & Rolling/Sliding Bearings 10.4 Design of Spur, Helical, Bevel & Worm Gears 10.5 Design of Helical, Leaf & Torsion Springs 10.6 Design of Brakes & Clutches: Energy, Lining Pressure & Heat

11 Chapter 11: Paper-II Fluid Mechanics & Hydraulic Machinery

11.1 Fluid Properties, Hydrostatic Forces & Buoyancy 11.2 Fluid Kinematics, Continuity & Bernoulli's Equation 11.3 Viscous Flow in Pipes, Boundary Layer & Minor Losses 11.4 Hydraulic Turbines, Centrifugal & Reciprocating Pumps 11.5 Dimensional Analysis, Similitude & Model Testing 11.6 Control-Volume Analysis: Continuity, Momentum & Energy

12 Chapter 12: Paper-II Thermodynamics, Thermal Cycles & Turbomachinery

12.1 Fundamental Concepts, First & Second Laws of Thermodynamics 12.2 Entropy, Availability, Exergy & Properties of Pure Substances 12.3 Air-Standard Gas Power Cycles: Otto, Diesel, Dual & Brayton 12.4 Vapour Power Cycles: Ideal, Reheat & Regenerative Rankine Cycles 12.5 Thermodynamic Relations: Maxwell, Clausius-Clapeyron & Joule-Thomson 12.6 Behaviour of Ideal & Real Gases and Equations of State 12.7 Air & Gas Compressors: Reciprocating, Rotary & Multi-Stage 12.8 Steam & Gas Turbines: Impulse, Reaction & Velocity Diagrams

13 Chapter 13: Paper-II Heat Transfer, Refrigeration & Air Conditioning

13.1 Steady & Unsteady Conduction, Extended Surfaces (Fins) 13.2 Forced/Natural Convection, Radiation & Heat Exchanger LMTD/NTU 13.3 Vapour Compression & Vapour Absorption Refrigeration Systems 13.4 Psychrometric Properties, Processes & Air Conditioning Systems 13.5 Gas Refrigeration, Heat Pump Cycles & Cryogenics

14 Chapter 14: Paper-II Materials Science, Metallurgy & Manufacturing Technology

14.1 Crystal Structures, Phase Diagrams & Iron-Iron Carbide Equilibrium 14.2 Heat Treatment Processes & Engineering Alloy Steels 14.3 Casting Processes, Metal Forming & Welding Metallurgy 14.4 Metal Cutting Mechanics, Tool Life & Machine Tools 14.5 Plastic Deformation, Yield Criteria & Load Estimation in Bulk Forming 14.6 Sheet Metal Forming: Shearing, Bending & Deep Drawing 14.7 Powder Metallurgy 14.8 Brazing, Soldering & Adhesive Bonding 14.9 Non-Traditional Machining: EDM, ECM, USM, AJM, LBM & EBM 14.10 Abrasive Machining, Grinding & Superfinishing 14.11 Principles of Work Holding, Jigs & Fixtures 14.12 Economics of Machining & Tool Life Optimisation

15 Chapter 15: Paper-II Metrology, Quality Control & Industrial Engineering / OR

15.1 Limits, Fits, Tolerances, Gauges & Surface Metrology 15.2 Production Planning, Forecasting & Inventory Control Models 15.3 Operations Research: Linear Programming & Transportation/Assignment 15.4 Project Management: CPM, PERT, Network Analysis & Crashing 15.5 Comparators & Interferometry 15.6 Coordinate Measuring Machines & Machine Tool Alignment Testing 15.7 Computer Integrated Manufacturing: CAD/CAM & Integration Tools 15.8 NC/CNC Machines & CNC Part Programming 15.9 Material Requirements Planning, Scheduling & Sequencing 15.10 Queuing Theory & Simple Queuing Models 15.11 Network Flow Models: Shortest Route, Maximal Flow & Spanning Tree

8.6 Deflection of Beams: Double Integration, Macaulay & Moment-Area

Key Takeaways Explain This Topic AI

Deflection of beams is named explicitly in the Mechanics of Materials bullet of the CIL Mechanical Paper-II syllabus.

The governing equation is EI times the second derivative of deflection with respect to x equal to the bending moment, integrated twice with constants fixed by support conditions.

Macaulay's method handles discontinuous loading by carrying bracket terms that are ignored whenever their contents are negative, avoiding separate equations for each span.

A simply supported beam with a central point load deflects by WL cubed over 48EI, while the same beam under uniformly distributed load deflects by 5wL to the fourth over 384EI.

Last updated: August 2026

Why Deflection, Not Just Stress

A beam may be perfectly safe in stress and still useless. A conveyor gantry that sags visibly under a loaded belt, a machine-tool bed that deflects enough to lose alignment, or a shaft whose deflection at the bearing exceeds the permissible slope will all fail in service while the material is nowhere near yield. Design codes therefore impose serviceability limits — often span over 325 or span over 500 — alongside strength limits.

The Elastic Curve Equation

For small deflections, the curvature of a beam relates to the bending moment through the flexure formula: 1 R = M E I and 1 R ≈ d 2 y d x 2 \frac{1}{R} = \frac{M}{EI} \quad\text{and}\quad \frac{1}{R} \approx \frac{d^2y}{dx^2} R 1 ​ = E I M ​ and R 1 ​ ≈ d x 2 d 2 y ​

Combining gives the governing differential equation: E I d 2 y d x 2 = M ( x ) \boxed{EI\frac{d^2y}{dx^2} = M(x)} E I d x 2 d 2 y ​ = M ( x ) ​

The full family of relations, obtained by successive differentiation, is worth memorising as a ladder:

  • Quantity Expression
  • Deflection y y y
  • Slope θ = d y d x \theta = \dfrac{dy}{dx} θ = d x d y ​
  • Bending moment M = E I d 2 y d x 2 M = EI\dfrac{d^2y}{dx^2} M = E I d x 2 d 2 y ​
  • Shear force F = E I d 3 y d x 3 F = EI\dfrac{d^3y}{dx^3} F = E I d x 3 d 3 y ​
  • Load intensity w = E I d 4 y d x 4 w = EI\dfrac{d^4y}{dx^4} w = E I d x 4 d 4 y ​
  • Double Integration Method

Integrating once gives the slope and twice the deflection, each step introducing a constant: E I d y d x = ∫ M d x + C 1 , E I y = ∬ M d x d x + C 1 x + C 2 EI\frac{dy}{dx} = \int M\,dx + C_1, \qquad EI\,y = \iint M\,dx\,dx + C_1x + C_2 E I d x d y ​ = ∫ M d x + C 1 ​ , E I y = ∬ M d x d x + C 1 ​ x + C 2 ​

The constants are found from boundary conditions:

  • Support Conditions
  • Simple support / roller y = 0 y = 0 y = 0
  • Fixed (built-in) end y = 0 y = 0 y = 0 and d y / d x = 0 dy/dx = 0 d y / d x = 0
  • Free end of a cantilever No condition; moment and shear are zero
  • Point of symmetry d y / d x = 0 dy/dx = 0 d y / d x = 0
  • Worked example: cantilever with end load

A cantilever of length L L L carries a point load W W W at the free end. Measuring x x x from the fixed end, M ( x ) = − W ( L − x ) M(x) = -W(L-x) M ( x ) = − W ( L − x ) . E I d 2 y d x 2 = − W ( L − x ) EI\frac{d^2y}{dx^2} = -W(L-x) E I d x 2 d 2 y ​ = − W ( L − x ) E I d y d x = − W ( L x − x 2 2 ) + C 1 EI\frac{dy}{dx} = -W\left(Lx - \frac{x^2}{2}\right) + C_1 E I d x d y ​ = − W ( Lx − 2 x 2 ​ ) + C 1 ​

At x = 0 x = 0 x = 0 the slope is zero, so C 1 = 0 C_1 = 0 C 1 ​ = 0 . Integrating again: E I y = − W ( L x 2 2 − x 3 6 ) + C 2 EI\,y = -W\left(\frac{Lx^2}{2} - \frac{x^3}{6}\right) + C_2 E I y = − W ( 2 L x 2 ​ − 6 x 3 ​ ) + C 2 ​

At x = 0 x = 0 x = 0 , y = 0 y = 0 y = 0 , so C 2 = 0 C_2 = 0 C 2 ​ = 0 . At the free end, x = L x = L x = L : y max ⁡ = − W L 3 3 E I , θ max ⁡ = − W L 2 2 E I y_{\max} = -\frac{WL^3}{3EI}, \qquad \theta_{\max} = -\frac{WL^2}{2EI} y m a x ​ = − 3 E I W L 3 ​ , θ m a x ​ = − 2 E I W L 2 ​

The negative sign indicates downward deflection; magnitudes are what the exam asks for.

Macaulay's Method

When loading is discontinuous — several point loads, a partial UDL, an applied couple — writing a separate moment expression for each segment produces many constants. Macaulay's method avoids this by using bracket terms: ⟨ x − a ⟩ n = { ( x − a ) n if x > a 0 if x ≤ a \langle x - a \rangle^{n} = \begin{cases} (x-a)^{n} & \text{if } x > a \\ 0 & \text{if } x \leq a\end{cases} ⟨ x − a ⟩ n = { ( x − a ) n 0 ​ if x > a if x ≤ a ​

The rules that make it work:

Measure x x x from one end only , conventionally the left.

Integrate the bracket as a whole : ∫ ⟨ x − a ⟩ n d x = ⟨ x − a ⟩ n + 1 n + 1 \displaystyle\int\langle x-a\rangle^n dx = \frac{\langle x-a\rangle^{n+1}}{n+1} ∫ ⟨ x − a ⟩ n d x = n + 1 ⟨ x − a ⟩ n + 1 ​ . Never expand the bracket.

Discard any bracket whose contents are negative when substituting a value of x x x .

A UDL that stops partway must be extended to the end of the beam and cancelled by an equal upward UDL from that point on.

The constants C 1 C_1 C 1 ​ and C 2 C_2 C 2 ​ apply to the whole beam , which is the saving.

Moment-Area Method

Mohr's two theorems convert the problem into areas under the M / E I M/EI M / E I diagram, which is fast for cantilevers and for beams with varying section.

Theorem I. The change in slope between two points equals the area of the M / E I M/EI M / E I diagram between them: θ A B = ∫ A B M E I d x \theta_{AB} = \int_A^B \frac{M}{EI}\,dx θ A B ​ = ∫ A B ​ E I M ​ d x

Theorem II. The vertical intercept on the tangent at A, measured at B, equals the first moment of that area about B: δ = ∫ A B M E I x d x \delta = \int_A^B \frac{M}{EI}\,x\,dx δ = ∫ A B ​ E I M ​ x d x

For a cantilever, where the tangent at the fixed end is horizontal, Theorem II gives the free-end deflection directly.

Check. For the cantilever with end load W W W , the M / E I M/EI M / E I diagram is a triangle of base L L L and height W L / E I WL/EI W L / E I , so its area is W L 2 / 2 E I WL^2/2EI W L 2 /2 E I — matching the slope found earlier. Its centroid lies at 2 L / 3 2L/3 2 L /3 from the free end, so the deflection is W L 2 2 E I × 2 L 3 = W L 3 3 E I \dfrac{WL^2}{2EI}\times\dfrac{2L}{3} = \dfrac{WL^3}{3EI} 2 E I W L 2 ​ × 3 2 L ​ = 3 E I W L 3 ​ . The two methods agree.

Energy Method: Castigliano's Second Theorem

The deflection at the point of application of a load P P P , in the direction of that load, is the partial derivative of strain energy with respect to that load: δ = ∂ U ∂ P , U = ∫ M 2 2 E I d x \delta = \frac{\partial U}{\partial P}, \qquad U = \int \frac{M^2}{2EI}\,dx δ = ∂ P ∂ U ​ , U = ∫ 2 E I M 2 ​ d x

so in practice δ = ∫ M E I ∂ M ∂ P d x \delta = \int \frac{M}{EI}\frac{\partial M}{\partial P}\,dx δ = ∫ E I M ​ ∂ P ∂ M ​ d x

If no load acts where the deflection is wanted, apply a dummy load Q Q Q , differentiate, then set Q = 0 Q = 0 Q = 0 . This is the unit load method , and it handles curved members and frames that defeat direct integration.

Standard Results Table

These must be recalled without derivation; they account for the majority of objective items on the topic.

Beam and loading Maximum deflection Maximum slope

Cantilever, point load W W W at free end W L 3 3 E I \dfrac{WL^3}{3EI} 3 E I W L 3 ​ W L 2 2 E I \dfrac{WL^2}{2EI} 2 E I W L 2 ​

Cantilever, UDL w w w over full span w L 4 8 E I \dfrac{wL^4}{8EI} 8 E I w L 4 ​ w L 3 6 E I \dfrac{wL^3}{6EI} 6 E I w L 3 ​

Cantilever, couple M M M at free end M L 2 2 E I \dfrac{ML^2}{2EI} 2 E I M L 2 ​ M L E I \dfrac{ML}{EI} E I M L ​

Simply supported, central point load W W W W L 3 48 E I \dfrac{WL^3}{48EI} 48 E I W L 3 ​ W L 2 16 E I \dfrac{WL^2}{16EI} 16 E I W L 2 ​

Simply supported, UDL w w w 5 w L 4 384 E I \dfrac{5wL^4}{384EI} 384 E I 5 w L 4 ​ w L 3 24 E I \dfrac{wL^3}{24EI} 24 E I w L 3 ​

  • Both ends fixed, central point load W W W W L 3 192 E I \dfrac{WL^3}{192EI} 192 E I W L 3 ​ 0 at supports
  • Both ends fixed, UDL w w w w L 4 384 E I \dfrac{wL^4}{384EI} 384 E I w L 4 ​ 0 at supports
  • Reading the table

Two patterns are worth internalising rather than memorising blindly.

Fixing the ends stiffens the beam dramatically. A simply supported beam with a central load deflects W L 3 / 48 E I WL^3/48EI W L 3 /48 E I ; fixing both ends reduces this to W L 3 / 192 E I WL^3/192EI W L 3 /192 E I , a factor of four . Under UDL the factor is five. This is why machine frames use welded rather than pinned connections wherever possible.

Deflection depends on the fourth power of span for distributed load and the cube for point load. Doubling the span of a conveyor gantry under its own distributed weight multiplies the sag by sixteen . Span reduction is therefore far more effective than adding section depth, though depth helps strongly too since I I I for a rectangle varies as d 3 d^3 d 3 .

Worked Example

A simply supported steel beam spans 6 m and carries a UDL of 12 kN/m. Take E = 200 E = 200 E = 200 GPa and I = 8 × 10 7 I = 8\times10^{7} I = 8 × 1 0 7 mm 4 ^4 4 . Find the central deflection. y = 5 w L 4 384 E I = 5 × 12 × ( 6000 ) 4 384 × 200000 × 8 × 10 7 y = \frac{5wL^4}{384EI} = \frac{5\times12\times(6000)^4}{384\times200000\times8\times10^{7}} y = 384 E I 5 w L 4 ​ = 384 × 200000 × 8 × 1 0 7 5 × 12 × ( 6000 ) 4 ​

Working in newtons and millimetres, w = 12 w = 12 w = 12 N/mm: y = 5 × 12 × 1.296 × 10 14 6.144 × 10 15 = 7.776 × 10 15 6.144 × 10 15 = 1.27 mm y = \frac{5\times12\times1.296\times10^{14}}{6.144\times10^{15}} = \frac{7.776\times10^{15}}{6.144\times10^{15}} = 1.27 \text{ mm} y = 6.144 × 1 0 15 5 × 12 × 1.296 × 1 0 14 ​ = 6.144 × 1 0 15 7.776 × 1 0 15 ​ = 1.27 mm

The span-to-deflection ratio is 6000 / 1.27 ≈ 4700 6000/1.27 \approx 4700 6000/1.27 ≈ 4700 , comfortably within any normal serviceability limit.