Study guide

8.2 Principal Stresses, Strain Energy & Mohr's Circle

Coal India Management Trainee CIL MT

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: CIL MT Exam Overview & Coal Sector Landscape

1.1 CIL MT Exam Pattern, Marking Scheme & Strategy 1.2 Coal India Limited: Corporate Structure, Maharatna Status & Subsidiaries 1.3 Indian Coal Mining Sector, Energy Mix & Environmental Regulations

2 Chapter 2: Paper-I General Awareness, Polity & Current Affairs

2.1 Indian Constitution, Governance & Statutory Bodies 2.2 Indian Economy, Union Budget & Economic Planning 2.3 Indian Geography, Mineral Belts & Environmental Ecology 2.4 Modern Indian History, Freedom Struggle & Cultural Heritage 2.5 General Science: Physics, Chemistry & Biology Fundamentals 2.6 Inventions, Discoveries & Scientific-Technological Development 2.7 Uses of Internet, Computer Awareness & Digital Governance 2.8 National & International Organisations 2.9 Awards, Honours & Sports 2.10 Books & Authors, Important Monuments & Places of India 2.11 Ports, Power Plants & Infrastructure of India 2.12 Climate Change, SDGs, National Parks & Wildlife Sanctuaries 2.13 Flagship Government Programmes & Current Affairs Method 2.14 World Physical, Social & Economic Geography

3 Chapter 3: Paper-I Reasoning & Logical Ability

3.1 Series Completion, Coding-Decoding & Semantic Analogies 3.2 Syllogisms, Logical Deduction & Venn Diagrams 3.3 Seating Arrangements, Linear/Circular Alignments & Puzzles 3.4 Direction Sense, Blood Relations & Order/Ranking 3.5 Alphabetical & Alphanumeric Series 3.6 Statement & Conclusions, Statement & Arguments 3.7 Clocks & Calendars 3.8 Cubes, Dice & Figure Counting 3.9 Mirror Images, Water Images, Embedded Figures & Non-Verbal Series 3.10 Decision Making & Data Analysis in Reasoning

4 Chapter 4: Paper-I Numerical Ability & Quantitative Aptitude

4.1 Arithmetic Foundations: Percentages, Profit & Loss, Ratio & Proportion 4.2 Averages, Simple/Compound Interest, Alligations & Mixtures 4.3 Time & Work, Pipes & Cisterns, Time, Speed & Distance 4.4 Algebra, Mensuration, Geometry & Data Interpretation (DI) 4.5 Number System, LCM, HCF & Decimal Fractions 4.6 Surds, Indices & Simplification 4.7 Problems on Ages 4.8 Boats & Streams and Problems on Trains 4.9 Permutations & Combinations 4.10 Probability for Quantitative Aptitude

5 Chapter 5: Paper-I General English & Verbal Ability

5.1 English Grammar, Error Spotting & Sentence Correction 5.2 Vocabulary Building: Synonyms, Antonyms, Idioms & Phrases 5.3 Reading Comprehension, Cloze Tests & Para Jumbles 5.4 Fill in the Blanks, Cloze Passages & Sentence Completion 5.5 Jumbled Sentences & Sentence Improvement

6 Chapter 6: Paper-II Engineering Mathematics

6.1 Matrix Algebra, Rank & Systems of Linear Equations 6.2 Eigenvalues, Eigenvectors & the Cayley-Hamilton Theorem 6.3 Limits, Continuity, Differentiability & Mean Value Theorems 6.4 Maxima-Minima, Indeterminate Forms & Taylor Series 6.5 Definite, Improper, Double & Triple Integrals 6.6 Partial Derivatives, Total Derivative & Multivariable Optimisation 6.7 First-Order Differential Equations: Linear & Non-Linear 6.8 Higher-Order Linear Differential Equations & Engineering Applications 6.9 Laplace Transforms & Transfer-Function Methods 6.10 Probability, Conditional Probability & Bayes' Theorem 6.11 Random Variables, Distributions & Descriptive Statistics 6.12 Numerical Methods: Root Finding, Integration & ODE Solvers

7 Chapter 7: Paper-II Engineering Mechanics & Statics-Dynamics

7.1 Force Systems, Coplanar Equilibrium & Lami's Theorem 7.2 Plane Trusses, Friction Mechanics & Screws/Wedges 7.3 Centroids, Center of Gravity & Moment of Inertia 7.4 Kinematics, Kinetics of Particles & Rigid Body Dynamics 7.5 Virtual Work & Lagrange's Equation 7.6 Rolling Friction, Belt-Pulley Drives, Brakes, Clutches & Vehicle Dynamics

8 Chapter 8: Paper-II Mechanics of Materials & Structural Integrity

8.1 Simple Stresses, Strains, Elastic Moduli & Thermal Stresses 8.2 Principal Stresses, Strain Energy & Mohr's Circle 8.3 Shear Force & Bending Moment Diagrams, Beam Bending & Shear Stresses 8.4 Torsion of Circular Shafts, Springs & Column Buckling 8.5 Thin Cylinders, Spheres & Thick-Walled Pressure Vessels 8.6 Deflection of Beams: Double Integration, Macaulay & Moment-Area 8.7 Shear Centre & Unsymmetrical Bending 8.8 Strain Gauges, Rosettes & Experimental Stress Analysis 8.9 Mechanical Testing: Universal Testing Machine, Hardness & Impact

9 Chapter 9: Paper-II Theory of Machines & Mechanical Vibrations

9.1 Simple Mechanisms, Kinematic Inversions & Velocity/Acceleration Diagrams 9.2 Cams & Followers, Toothed Gearing & Epicyclic Gear Trains 9.3 Flywheels, Centrifugal/Inertia Governors & Rotor Balancing 9.4 Free, Damped & Forced Single-Degree-of-Freedom Vibrations 9.5 Gyroscopic Couple & Gyroscopic Effects

10 Chapter 10: Paper-II Machine Design & Failure Theories

10.1 Static Failure Theories & Variable/Fatigue Loading 10.2 Design of Threaded Fasteners, Welded & Riveted Joints 10.3 Design of Shafts, Keys, Couplings & Rolling/Sliding Bearings 10.4 Design of Spur, Helical, Bevel & Worm Gears 10.5 Design of Helical, Leaf & Torsion Springs 10.6 Design of Brakes & Clutches: Energy, Lining Pressure & Heat

11 Chapter 11: Paper-II Fluid Mechanics & Hydraulic Machinery

11.1 Fluid Properties, Hydrostatic Forces & Buoyancy 11.2 Fluid Kinematics, Continuity & Bernoulli's Equation 11.3 Viscous Flow in Pipes, Boundary Layer & Minor Losses 11.4 Hydraulic Turbines, Centrifugal & Reciprocating Pumps 11.5 Dimensional Analysis, Similitude & Model Testing 11.6 Control-Volume Analysis: Continuity, Momentum & Energy

12 Chapter 12: Paper-II Thermodynamics, Thermal Cycles & Turbomachinery

12.1 Fundamental Concepts, First & Second Laws of Thermodynamics 12.2 Entropy, Availability, Exergy & Properties of Pure Substances 12.3 Air-Standard Gas Power Cycles: Otto, Diesel, Dual & Brayton 12.4 Vapour Power Cycles: Ideal, Reheat & Regenerative Rankine Cycles 12.5 Thermodynamic Relations: Maxwell, Clausius-Clapeyron & Joule-Thomson 12.6 Behaviour of Ideal & Real Gases and Equations of State 12.7 Air & Gas Compressors: Reciprocating, Rotary & Multi-Stage 12.8 Steam & Gas Turbines: Impulse, Reaction & Velocity Diagrams

13 Chapter 13: Paper-II Heat Transfer, Refrigeration & Air Conditioning

13.1 Steady & Unsteady Conduction, Extended Surfaces (Fins) 13.2 Forced/Natural Convection, Radiation & Heat Exchanger LMTD/NTU 13.3 Vapour Compression & Vapour Absorption Refrigeration Systems 13.4 Psychrometric Properties, Processes & Air Conditioning Systems 13.5 Gas Refrigeration, Heat Pump Cycles & Cryogenics

14 Chapter 14: Paper-II Materials Science, Metallurgy & Manufacturing Technology

14.1 Crystal Structures, Phase Diagrams & Iron-Iron Carbide Equilibrium 14.2 Heat Treatment Processes & Engineering Alloy Steels 14.3 Casting Processes, Metal Forming & Welding Metallurgy 14.4 Metal Cutting Mechanics, Tool Life & Machine Tools 14.5 Plastic Deformation, Yield Criteria & Load Estimation in Bulk Forming 14.6 Sheet Metal Forming: Shearing, Bending & Deep Drawing 14.7 Powder Metallurgy 14.8 Brazing, Soldering & Adhesive Bonding 14.9 Non-Traditional Machining: EDM, ECM, USM, AJM, LBM & EBM 14.10 Abrasive Machining, Grinding & Superfinishing 14.11 Principles of Work Holding, Jigs & Fixtures 14.12 Economics of Machining & Tool Life Optimisation

15 Chapter 15: Paper-II Metrology, Quality Control & Industrial Engineering / OR

15.1 Limits, Fits, Tolerances, Gauges & Surface Metrology 15.2 Production Planning, Forecasting & Inventory Control Models 15.3 Operations Research: Linear Programming & Transportation/Assignment 15.4 Project Management: CPM, PERT, Network Analysis & Crashing 15.5 Comparators & Interferometry 15.6 Coordinate Measuring Machines & Machine Tool Alignment Testing 15.7 Computer Integrated Manufacturing: CAD/CAM & Integration Tools 15.8 NC/CNC Machines & CNC Part Programming 15.9 Material Requirements Planning, Scheduling & Sequencing 15.10 Queuing Theory & Simple Queuing Models 15.11 Network Flow Models: Shortest Route, Maximal Flow & Spanning Tree

8.2 Principal Stresses, Strain Energy & Mohr's Circle

Key Takeaways Explain This Topic AI

The first stress invariant I 1 = σ x + σ y = σ 1 + σ 2 I_1 = \sigma_x + \sigma_y = \sigma_1 + \sigma_2 I 1 ​ = σ x ​ + σ y ​ = σ 1 ​ + σ 2 ​ ensures the sum of orthogonal normal stresses is constant across all plane orientations, defining the center of Mohr's Circle at ( σ x + σ y 2 , 0 ) (\frac{\sigma_x+\sigma_y}{2}, 0) ( 2 σ x ​ + σ y ​ ​ , 0 ) .

Principal planes are mutually perpendicular planes on which shear stresses are identically zero ( τ = 0 \tau = 0 τ = 0 ), oriented at θ p = 1 2 arctan ⁡ ( 2 τ x y σ x − σ y ) \theta_p = \frac{1}{2}\arctan\left(\frac{2\tau_{xy}}{\sigma_x - \sigma_y}\right) θ p ​ = 2 1 ​ arctan ( σ x ​ − σ y ​ 2 τ x y ​ ​ ) .

In 2D plane stress states where both in-plane principal stresses are tensile ( σ 1 ≥ σ 2 > 0 \sigma_1 \ge \sigma_2 > 0 σ 1 ​ ≥ σ 2 ​ > 0 ), the absolute maximum shear stress is out-of-plane: τ abs , max ⁡ = σ 1 2 \tau_{\text{abs},\max} = \frac{\sigma_1}{2} τ abs , m a x ​ = 2 σ 1 ​ ​ , NOT the in-plane value σ 1 − σ 2 2 \frac{\sigma_1 - \sigma_2}{2} 2 σ 1 ​ − σ 2 ​ ​ .

Thin cylindrical shells under gauge pressure p p p experience hoop stress σ h = p d 2 t \sigma_h = \frac{pd}{2t} σ h ​ = 2 t p d ​ and axial stress σ l = p d 4 t \sigma_l = \frac{pd}{4t} σ l ​ = 4 t p d ​ , resulting in a hoop-to-longitudinal strain ratio of ϵ h ϵ l = 2 − μ 1 − 2 μ \frac{\epsilon_h}{\epsilon_l} = \frac{2-\mu}{1-2\mu} ϵ l ​ ϵ h ​ ​ = 1 − 2 μ 2 − μ ​ and volumetric strain ϵ v = p d 4 t E ( 5 − 4 μ ) \epsilon_v = \frac{pd}{4tE}(5-4\mu) ϵ v ​ = 4 tE p d ​ ( 5 − 4 μ ) .

Castigliano's Second Theorem dictates that the partial derivative of total elastic strain energy U U U with respect to an applied concentrated force P i P_i P i ​ yields the exact deflection δ i \delta_i δ i ​ in the direction of that force: δ i = ∂ U ∂ P i \delta_i = \frac{\partial U}{\partial P_i} δ i ​ = ∂ P i ​ ∂ U ​ .

Last updated: August 2026

1. 2D Stress Transformation & Stress Invariants

In complex mining structures—such as continuous miner cutterhead drives, shaft hoist drums, and hydraulic powered roof support canopy beams—material elements are simultaneously subjected to combined axial, bending, and torsional loads, creating multiaxial stress fields.

Stress Transformation Equations

Consider an infinitesimal plane stress element defined by normal stresses σ x , σ y \sigma_x, \sigma_y σ x ​ , σ y ​ and shear stress τ x y \tau_{xy} τ x y ​ . An oblique plane cut at an angle θ \theta θ (measured counterclockwise from the vertical plane on which σ x \sigma_x σ x ​ acts) experiences normal stress σ θ \sigma_{\theta} σ θ ​ and shear stress τ θ \tau_{\theta} τ θ ​ : σ θ = σ x + σ y 2 + ( σ x − σ y 2 ) cos ⁡ 2 θ + τ x y sin ⁡ 2 θ \mathbf{\sigma_{\theta} = \frac{\sigma_x + \sigma_y}{2} + \left(\frac{\sigma_x - \sigma_y}{2}\right)\cos 2\theta + \tau_{xy}\sin 2\theta} σ θ ​ = 2 σ x ​ + σ y ​ ​ + ( 2 σ x ​ − σ y ​ ​ ) cos 2 θ + τ xy ​ sin 2 θ τ θ = − ( σ x − σ y 2 ) sin ⁡ 2 θ + τ x y cos ⁡ 2 θ \mathbf{\tau_{\theta} = -\left(\frac{\sigma_x - \sigma_y}{2}\right)\sin 2\theta + \tau_{xy}\cos 2\theta} τ θ ​ = − ( 2 σ x ​ − σ y ​ ​ ) sin 2 θ + τ xy ​ cos 2 θ σ_y

  • ^
  • | τ_xy
  • +-----|----+----->
  • | | |
  • σ_x <|-----+----+----|> σ_x
  • | /| |
  • +---/-|----+----->
  • / | τ_xy
  • / v
  • /θ σ_y
  • / (Oblique Plane cut at angle θ)
  • Stress Invariants in 2D

The transformation equations reveal quantities that remain perfectly invariant under any coordinate rotation θ \theta θ :

First Stress Invariant ( I 1 I_1 I 1 ​ ): I 1 = σ x + σ y = σ θ + σ θ + 90 ∘ = σ 1 + σ 2 = constant I_1 = \sigma_x + \sigma_y = \sigma_{\theta} + \sigma_{\theta + 90^{\circ}} = \sigma_1 + \sigma_2 = \text{constant} I 1 ​ = σ x ​ + σ y ​ = σ θ ​ + σ θ + 9 0 ∘ ​ = σ 1 ​ + σ 2 ​ = constant Physical meaning: The sum of normal stresses on any two mutually perpendicular planes is constant.

Second Stress Invariant ( I 2 I_2 I 2 ​ ): I 2 = σ x σ y − τ x y 2 = σ 1 σ 2 = constant I_2 = \sigma_x \sigma_y - \tau_{xy}^2 = \sigma_1 \sigma_2 = \text{constant} I 2 ​ = σ x ​ σ y ​ − τ x y 2 ​ = σ 1 ​ σ 2 ​ = constant

  • 2. Principal Planes, Principal Stresses & Maximum Shear Stress
  • Principal Planes & Stresses

Principal planes are defined as planes where the shear stress is identically zero ( τ θ = 0 \tau_{\theta} = 0 τ θ ​ = 0 ). Setting τ θ = 0 \tau_{\theta} = 0 τ θ ​ = 0 yields the orientation of principal planes: tan ⁡ 2 θ p = 2 τ x y σ x − σ y \tan 2\theta_p = \frac{2\tau_{xy}}{\sigma_x - \sigma_y} tan 2 θ p ​ = σ x ​ − σ y ​ 2 τ x y ​ ​

This equation gives two orthogonal solutions for θ p \theta_p θ p ​ , spaced 90 ∘ 90^{\circ} 9 0 ∘ apart ( θ p 1 \theta_{p1} θ p 1 ​ and θ p 2 = θ p 1 + 90 ∘ \theta_{p2} = \theta_{p1} + 90^{\circ} θ p 2 ​ = θ p 1 ​ + 9 0 ∘ ). Substituting back into σ θ \sigma_{\theta} σ θ ​ yields the Major ( σ 1 \sigma_1 σ 1 ​ ) and Minor ( σ 2 \sigma_2 σ 2 ​ ) principal stresses: σ 1 , 2 = σ x + σ y 2 ± ( σ x − σ y 2 ) 2 + τ x y 2 \mathbf{\sigma_{1,2} = \frac{\sigma_x + \sigma_y}{2} \pm \sqrt{\left(\frac{\sigma_x - \sigma_y}{2}\right)^2 + \tau_{xy}^2}} σ 1 , 2 ​ = 2 σ x ​ + σ y ​ ​ ± ( 2 σ x ​ − σ y ​ ​ ) 2 + τ xy 2 ​ ​

Maximum In-Plane Shear Stress

To find the planes of maximum shear stress, we maximize τ θ \tau_{\theta} τ θ ​ with respect to θ \theta θ ( d τ θ d θ = 0 \frac{d\tau_{\theta}}{d\theta} = 0 d θ d τ θ ​ ​ = 0 ): tan ⁡ 2 θ s = − σ x − σ y 2 τ x y = − cot ⁡ 2 θ p ⟹ 2 θ s = 2 θ p ± 90 ∘ ⟹ θ s = θ p ± 45 ∘ \tan 2\theta_s = -\frac{\sigma_x - \sigma_y}{2\tau_{xy}} = -\cot 2\theta_p \implies 2\theta_s = 2\theta_p \pm 90^{\circ} \implies \mathbf{\theta_s = \theta_p \pm 45^{\circ}} tan 2 θ s ​ = − 2 τ x y ​ σ x ​ − σ y ​ ​ = − cot 2 θ p ​ ⟹ 2 θ s ​ = 2 θ p ​ ± 9 0 ∘ ⟹ θ s ​ = θ p ​ ± 4 5 ∘

Planes of maximum shear stress are oriented at 45 ∘ 45^{\circ} 4 5 ∘ to the principal planes.

The magnitude of the maximum in-plane shear stress is: τ in-plane , max ⁡ = ( σ x − σ y 2 ) 2 + τ x y 2 = σ 1 − σ 2 2 \mathbf{\tau_{\text{in-plane},\max} = \sqrt{\left(\frac{\sigma_x - \sigma_y}{2}\right)^2 + \tau_{xy}^2} = \frac{\sigma_1 - \sigma_2}{2}} τ in-plane , m a x ​ = ( 2 σ x ​ − σ y ​ ​ ) 2 + τ xy 2 ​ ​ = 2 σ 1 ​ − σ 2 ​ ​

The normal stress acting on the maximum shear stress plane is non-zero and equals the average normal stress: σ avg = σ x + σ y 2 = σ 1 + σ 2 2 \sigma_{\text{avg}} = \frac{\sigma_x + \sigma_y}{2} = \frac{\sigma_1 + \sigma_2}{2} σ avg ​ = 2 σ x ​ + σ y ​ ​ = 2 σ 1 ​ + σ 2 ​ ​

Absolute Maximum Shear Stress in 3D ( τ abs , max ⁡ \tau_{\text{abs},\max} τ abs , m a x ​ )

In three dimensions, with ordered principal stresses σ 1 ≥ σ 2 ≥ σ 3 \sigma_1 \ge \sigma_2 \ge \sigma_3 σ 1 ​ ≥ σ 2 ​ ≥ σ 3 ​ , the absolute maximum shear stress is: τ abs , max ⁡ = σ 1 − σ 3 2 = max ⁡ ( ∣ σ 1 − σ 2 2 ∣ , ∣ σ 2 − σ 3 2 ∣ , ∣ σ 3 − σ 1 2 ∣ ) \mathbf{\tau_{\text{abs},\max} = \frac{\sigma_1 - \sigma_3}{2} = \max\left(\left|\frac{\sigma_1 - \sigma_2}{2}\right|, \left|\frac{\sigma_2 - \sigma_3}{2}\right|, \left|\frac{\sigma_3 - \sigma_1}{2}\right|\right)} τ abs , m a x ​ = 2 σ 1 ​ − σ 3 ​ ​ = max ( ​ 2 σ 1 ​ − σ 2 ​ ​ ​ , ​ 2 σ 2 ​ − σ 3 ​ ​ ​ , ​ 2 σ 3 ​ − σ 1 ​ ​ ​ )

CRITICAL EXAM TRAP FOR PLANE STRESS ( σ 3 = 0 \sigma_3 = 0 σ 3 ​ = 0 ):

Opposite Signs ( σ 1 > 0 > σ 2 \sigma_1 > 0 > \sigma_2 σ 1 ​ > 0 > σ 2 ​ ): Here σ 1 ≥ σ 3 = 0 ≥ σ 2 \sigma_1 \ge \sigma_3 = 0 \ge \sigma_2 σ 1 ​ ≥ σ 3 ​ = 0 ≥ σ 2 ​ . Thus τ abs , max ⁡ = σ 1 − σ 2 2 = τ in-plane , max ⁡ \tau_{\text{abs},\max} = \frac{\sigma_1 - \sigma_2}{2} = \tau_{\text{in-plane},\max} τ abs , m a x ​ = 2 σ 1 ​ − σ 2 ​ ​ = τ in-plane , m a x ​ .

Like Signs - Both Tensile ( σ 1 ≥ σ 2 > 0 \sigma_1 \ge \sigma_2 > 0 σ 1 ​ ≥ σ 2 ​ > 0 ): Here the ordered principal stresses are σ 1 ≥ σ 2 ≥ σ 3 = 0 \sigma_1 \ge \sigma_2 \ge \sigma_3 = 0 σ 1 ​ ≥ σ 2 ​ ≥ σ 3 ​ = 0 . Thus: τ abs , max ⁡ = σ 1 − 0 2 = σ 1 2 \mathbf{\tau_{\text{abs},\max} = \frac{\sigma_1 - 0}{2} = \frac{\sigma_1}{2}} τ abs , m a x ​ = 2 σ 1 ​ − 0 ​ = 2 σ 1 ​ ​ (Occurs on an out-of-plane plane inclined at 45 ∘ 45^{\circ} 4 5 ∘ to the 1-3 axes, NOT in the x-y plane!).

Like Signs - Both Compressive ( 0 > σ 1 ≥ σ 2 0 > \sigma_1 \ge \sigma_2 0 > σ 1 ​ ≥ σ 2 ​ ): Ordered as σ 3 = 0 ≥ σ 1 ≥ σ 2 \sigma_3 = 0 \ge \sigma_1 \ge \sigma_2 σ 3 ​ = 0 ≥ σ 1 ​ ≥ σ 2 ​ . Thus: τ abs , max ⁡ = 0 − σ 2 2 = ∣ σ 2 ∣ 2 \mathbf{\tau_{\text{abs},\max} = \frac{0 - \sigma_2}{2} = \frac{|\sigma_2|}{2}} τ abs , m a x ​ = 2 0 − σ 2 ​ ​ = 2 ∣ σ 2 ​ ∣ ​

3. Mohr's Circle of Stress

Mohr's circle is the graphical representation of 2D stress transformation equations, where the horizontal axis represents normal stress σ \sigma σ and the vertical axis represents shear stress τ \tau τ . τ (Shear Stress)

  • ^
  • | Radius R = τ_in-plane,max
  • | .---* (σ_y, -τ_xy)
  • | / |
  • | / |
  • | | C |
  • ---------+-------+---*---+------------------> σ (Normal Stress)
  • | \ (σ_avg, 0) σ_1
  • | \ |
  • | '---* (σ_x, τ_xy)
  • v
  • Construction Rules

Center Coordinates ( C C C ): C = ( σ x + σ y 2 , 0 ) = ( σ 1 + σ 2 2 , 0 ) C = \left(\frac{\sigma_x + \sigma_y}{2}, 0\right) = \left(\frac{\sigma_1 + \sigma_2}{2}, 0\right) C = ( 2 σ x ​ + σ y ​ ​ , 0 ) = ( 2 σ 1 ​ + σ 2 ​ ​ , 0 ) . Center always lies on the normal stress axis.

Radius ( R R R ): R = ( σ x − σ y 2 ) 2 + τ x y 2 = σ 1 − σ 2 2 = τ in-plane , max ⁡ R = \sqrt{\left(\frac{\sigma_x - \sigma_y}{2}\right)^2 + \tau_{xy}^2} = \frac{\sigma_1 - \sigma_2}{2} = \tau_{\text{in-plane},\max} R = ( 2 σ x ​ − σ y ​ ​ ) 2 + τ x y 2 ​ ​ = 2 σ 1 ​ − σ 2 ​ ​ = τ in-plane , m a x ​ .

Angle Doubling: An angle rotation of θ \theta θ in the physical stress element corresponds to an angle rotation of 2 θ 2\theta 2 θ in the same direction on Mohr's circle.

Canonical Stress States on Mohr's Circle

Stress State Applied Stresses Center C C C Radius R R R Principal Stresses Max In-Plane Shear

Uniaxial Tension σ x = σ , σ y = 0 , τ x y = 0 \sigma_x = \sigma, \sigma_y = 0, \tau_{xy} = 0 σ x ​ = σ , σ y ​ = 0 , τ x y ​ = 0 ( σ / 2 , 0 ) (\sigma/2, 0) ( σ /2 , 0 ) σ / 2 \sigma/2 σ /2 σ 1 = σ , σ 2 = 0 \sigma_1 = \sigma, \sigma_2 = 0 σ 1 ​ = σ , σ 2 ​ = 0 τ max ⁡ = σ / 2 \tau_{\max} = \sigma/2 τ m a x ​ = σ /2

Pure Shear σ x = 0 , σ y = 0 , τ x y = τ \sigma_x = 0, \sigma_y = 0, \tau_{xy} = \tau σ x ​ = 0 , σ y ​ = 0 , τ x y ​ = τ ( 0 , 0 ) (0, 0) ( 0 , 0 ) τ \tau τ σ 1 = + τ , σ 2 = − τ \sigma_1 = +\tau, \sigma_2 = -\tau σ 1 ​ = + τ , σ 2 ​ = − τ τ max ⁡ = τ \tau_{\max} = \tau τ m a x ​ = τ

Hydrostatic 2D Stress σ x = σ y = σ , τ x y = 0 \sigma_x = \sigma_y = \sigma, \tau_{xy} = 0 σ x ​ = σ y ​ = σ , τ x y ​ = 0 ( σ , 0 ) (\sigma, 0) ( σ , 0 ) 0 0 0 (Point Circle) σ 1 = σ 2 = σ \sigma_1 = \sigma_2 = \sigma σ 1 ​ = σ 2 ​ = σ τ max ⁡ = 0 \tau_{\max} = 0 τ m a x ​ = 0

Pure Biaxial (Equal & Opposite) σ x = σ , σ y = − σ , τ x y = 0 \sigma_x = \sigma, \sigma_y = -\sigma, \tau_{xy} = 0 σ x ​ = σ , σ y ​ = − σ , τ x y ​ = 0 ( 0 , 0 ) (0, 0) ( 0 , 0 ) σ \sigma σ σ 1 = + σ , σ 2 = − σ \sigma_1 = +\sigma, \sigma_2 = -\sigma σ 1 ​ = + σ , σ 2 ​ = − σ τ max ⁡ = σ \tau_{\max} = \sigma τ m a x ​ = σ

4. Thin Pressure Vessels: Cylinders and Spheres

A pressure vessel is classified as thin-walled when the wall thickness t t t is less than 1 20 \frac{1}{20} 20 1 ​ to 1 10 \frac{1}{10} 10 1 ​ of its internal diameter d d d ( t / d ≤ 0.05 − 0.10 t/d \le 0.05 - 0.10 t / d ≤ 0.05 − 0.10 ). Radial stress σ r \sigma_r σ r ​ across the thickness is negligible compared to membrane stresses.

1. Thin Cylindrical Shells

Subjected to internal gauge pressure p p p , inside diameter d d d , and thickness t t t : +-----------------------------------+ ^

  • <== | | | Longitudinal stress σ_l
  • σ_l | Internal Pressure p | d
  • <== | | v
  • +-----------------------------------+ ----
  • Hoop Stress σ_h (Circumferential) t

Hoop / Circumferential Stress ( σ h = σ 1 \sigma_h = \sigma_1 σ h ​ = σ 1 ​ ): Acts tangentially along the circumference to resist bursting across longitudinal diametral plane: σ h = p d 2 t \mathbf{\sigma_h = \frac{p d}{2 t}} σ h ​ = 2t pd ​

Longitudinal / Axial Stress ( σ l = σ 2 \sigma_l = \sigma_2 σ l ​ = σ 2 ​ ): Acts parallel to the longitudinal axis to resist bursting across transverse plane: σ l = p d 4 t = 1 2 σ h \mathbf{\sigma_l = \frac{p d}{4 t} = \frac{1}{2}\sigma_h} σ l ​ = 4t pd ​ = 2 1 ​ σ h ​

Strains: ϵ h = σ h E − μ σ l E = p d 4 t E ( 2 − μ ) \epsilon_h = \frac{\sigma_h}{E} - \mu\frac{\sigma_l}{E} = \frac{pd}{4tE}(2 - \mu) ϵ h ​ = E σ h ​ ​ − μ E σ l ​ ​ = 4 tE p d ​ ( 2 − μ ) ϵ l = σ l E − μ σ h E = p d 4 t E ( 1 − 2 μ ) \epsilon_l = \frac{\sigma_l}{E} - \mu\frac{\sigma_h}{E} = \frac{pd}{4tE}(1 - 2\mu) ϵ l ​ = E σ l ​ ​ − μ E σ h ​ ​ = 4 tE p d ​ ( 1 − 2 μ ) ϵ h ϵ l = 2 − μ 1 − 2 μ \mathbf{\frac{\epsilon_h}{\epsilon_l} = \frac{2 - \mu}{1 - 2\mu}} ϵ l ​ ϵ h ​ ​ = 1 − 2 μ 2 − μ ​

Volumetric Strain ( ϵ v = Δ V V \epsilon_v = \frac{\Delta V}{V} ϵ v ​ = V Δ V ​ ): ϵ v = 2 ϵ h + ϵ l = p d 4 t E ( 5 − 4 μ ) \epsilon_v = 2\epsilon_h + \epsilon_l = \mathbf{\frac{pd}{4tE}(5 - 4\mu)} ϵ v ​ = 2 ϵ h ​ + ϵ l ​ = 4tE pd ​ ( 5 − 4 μ )

Shear Stresses:

Maximum In-Plane Shear Stress: τ in-plane , max ⁡ = σ h − σ l 2 = p d / 2 t − p d / 4 t 2 = p d 8 t \tau_{\text{in-plane},\max} = \frac{\sigma_h - \sigma_l}{2} = \frac{pd/2t - pd/4t}{2} = \mathbf{\frac{pd}{8t}} τ in-plane , m a x ​ = 2 σ h ​ − σ l ​ ​ = 2 p d /2 t − p d /4 t ​ = 8t pd ​ .

Absolute Maximum Shear Stress (with σ 3 ≈ 0 \sigma_3 \approx 0 σ 3 ​ ≈ 0 ): τ abs , max ⁡ = σ h − 0 2 = p d 4 t \tau_{\text{abs},\max} = \frac{\sigma_h - 0}{2} = \mathbf{\frac{pd}{4t}} τ abs , m a x ​ = 2 σ h ​ − 0 ​ = 4t pd ​ .

2. Thin Spherical Shells

Due to spherical symmetry, the membrane stress in all tangential directions is identical:

Membrane Stress: σ 1 = σ 2 = p d 4 t \sigma_1 = \sigma_2 = \mathbf{\frac{pd}{4t}} σ 1 ​ = σ 2 ​ = 4t pd ​ .

Strains: ϵ 1 = ϵ 2 = σ 1 E ( 1 − μ ) = p d 4 t E ( 1 − μ ) \epsilon_1 = \epsilon_2 = \frac{\sigma_1}{E}(1 - \mu) = \mathbf{\frac{pd}{4tE}(1 - \mu)} ϵ 1 ​ = ϵ 2 ​ = E σ 1 ​ ​ ( 1 − μ ) = 4tE pd ​ ( 1 − μ ) .

Volumetric Strain: ϵ v = 3 ϵ = 3 p d 4 t E ( 1 − μ ) \epsilon_v = 3\epsilon = \mathbf{\frac{3pd}{4tE}(1 - \mu)} ϵ v ​ = 3 ϵ = 4tE 3pd ​ ( 1 − μ ) .

Shear Stresses:

Maximum In-Plane Shear Stress: τ in-plane , max ⁡ = σ 1 − σ 2 2 = 0 \tau_{\text{in-plane},\max} = \frac{\sigma_1 - \sigma_2}{2} = \mathbf{0} τ in-plane , m a x ​ = 2 σ 1 ​ − σ 2 ​ ​ = 0 .

Absolute Maximum Shear Stress: τ abs , max ⁡ = σ 1 − 0 2 = p d 8 t \tau_{\text{abs},\max} = \frac{\sigma_1 - 0}{2} = \mathbf{\frac{pd}{8t}} τ abs , m a x ​ = 2 σ 1 ​ − 0 ​ = 8t pd ​ .

  • 5. Elastic Strain Energy, Resilience & Castigliano's Second Theorem
  • Elastic Strain Energy Formulations ( U U U )

Strain energy is the internal potential energy stored in an elastic body during deformation:

Loading Mode Internal Work Expression For Constant Section Along Length L L L

Axial Force P ( x ) P(x) P ( x ) U = ∫ 0 L P 2 ( x ) 2 A E d x U = \int_0^L \frac{P^2(x)}{2AE} dx U = ∫ 0 L ​ 2 A E P 2 ( x ) ​ d x U = P 2 L 2 A E U = \mathbf{\frac{P^2 L}{2AE}} U = 2AE P 2 L ​

Bending Moment M ( x ) M(x) M ( x ) U = ∫ 0 L M 2 ( x ) 2 E I d x U = \int_0^L \frac{M^2(x)}{2EI} dx U = ∫ 0 L ​ 2 E I M 2 ( x ) ​ d x For constant moment M M M : U = M 2 L 2 E I U = \mathbf{\frac{M^2 L}{2EI}} U = 2EI M 2 L ​

Torsional Torque T ( x ) T(x) T ( x ) U = ∫ 0 L T 2 ( x ) 2 G J d x U = \int_0^L \frac{T^2(x)}{2GJ} dx U = ∫ 0 L ​ 2 G J T 2 ( x ) ​ d x U = T 2 L 2 G J U = \mathbf{\frac{T^2 L}{2GJ}} U = 2GJ T 2 L ​

Direct Shear Stress τ \tau τ U = ∫ V τ 2 2 G d V U = \int_V \frac{\tau^2}{2G} dV U = ∫ V ​ 2 G τ 2 ​ d V U = τ 2 2 G × V U = \frac{\tau^2}{2G} \times V U = 2 G τ 2 ​ × V

Resilience Terminology

Resilience: The capacity of a material to absorb energy when deformed elastically and release that energy upon unloading.

Proof Resilience: The maximum strain energy stored in a body up to the elastic limit without undergoing permanent plastic deformation: U proof = σ y 2 2 E × V U_{\text{proof}} = \frac{\sigma_y^2}{2E} \times V U proof ​ = 2 E σ y 2 ​ ​ × V

Modulus of Resilience ( u r u_r u r ​ ): The strain energy stored per unit volume at the elastic limit (area under the elastic region of the stress-strain curve): u r = σ y 2 2 E \mathbf{u_r = \frac{\sigma_y^2}{2E}} u r ​ = 2E σ y 2 ​ ​

Modulus of Toughness: The total work done (energy absorbed) per unit volume up to complete fracture (total area under the entire stress-strain curve).

Castigliano's Second Theorem (Deflection)

In any linearly elastic structure at constant temperature, the first partial derivative of the total internal strain energy U U U with respect to an applied concentrated force P i P_i P i ​ equals the displacement δ i \delta_i δ i ​ of the point of application of P i P_i P i ​ in the direction of P i P_i P i ​ : δ i = ∂ U ∂ P i \mathbf{\delta_i = \frac{\partial U}{\partial P_i}} δ i ​ = ∂ P i ​ ∂U ​

Similarly, for an applied moment M i M_i M i ​ , the angular rotation θ i \theta_i θ i ​ is: θ i = ∂ U ∂ M i \mathbf{\theta_i = \frac{\partial U}{\partial M_i}} θ i ​ = ∂ M i ​ ∂U ​

  • 6. Worked Step-by-Step Engineering Calculations
  • Example 1: Biaxial State and Absolute Maximum Shear Stress

Problem: A structural steel plate element in a mine shaft headframe is subjected to normal stresses σ x = 120 MPa \sigma_x = 120\text{ MPa} σ x ​ = 120 MPa (tensile), σ y = 40 MPa \sigma_y = 40\text{ MPa} σ y ​ = 40 MPa (tensile), and shear stress τ x y = 30 MPa \tau_{xy} = 30\text{ MPa} τ x y ​ = 30 MPa . Find:

  • Principal stresses σ 1 \sigma_1 σ 1 ​ and σ 2 \sigma_2 σ 2 ​
  • Orientation of major principal plane θ p 1 \theta_{p1} θ p 1 ​
  • Maximum in-plane shear stress τ in-plane , max ⁡ \tau_{\text{in-plane},\max} τ in-plane , m a x ​
  • Absolute maximum shear stress in 3D τ abs , max ⁡ \tau_{\text{abs},\max} τ abs , m a x ​

Solution:

1. Principal Stresses: σ 1 , 2 = σ x + σ y 2 ± ( σ x − σ y 2 ) 2 + τ x y 2 = 120 + 40 2 ± ( 120 − 40 2 ) 2 + 30 2 \sigma_{1,2} = \frac{\sigma_x + \sigma_y}{2} \pm \sqrt{\left(\frac{\sigma_x - \sigma_y}{2}\right)^2 + \tau_{xy}^2} = \frac{120 + 40}{2} \pm \sqrt{\left(\frac{120 - 40}{2}\right)^2 + 30^2} σ 1 , 2 ​ = 2 σ x ​ + σ y ​ ​ ± ( 2 σ x ​ − σ y ​ ​ ) 2 + τ x y 2 ​ ​ = 2 120 + 40 ​ ± ( 2 120 − 40 ​ ) 2 + 3 0 2 ​ σ 1 , 2 = 80 ± 40 2 + 30 2 = 80 ± 1600 + 900 = 80 ± 50 \sigma_{1,2} = 80 \pm \sqrt{40^2 + 30^2} = 80 \pm \sqrt{1600 + 900} = 80 \pm 50 σ 1 , 2 ​ = 80 ± 4 0 2 + 3 0 2 ​ = 80 ± 1600 + 900 ​ = 80 ± 50 σ 1 = 80 + 50 = 130 MPa , σ 2 = 80 − 50 = 30 MPa \sigma_1 = 80 + 50 = \mathbf{130\text{ MPa}}, \qquad \sigma_2 = 80 - 50 = \mathbf{30\text{ MPa}} σ 1 ​ = 80 + 50 = 130 MPa , σ 2 ​ = 80 − 50 = 30 MPa

2. Major Principal Plane Orientation: tan ⁡ 2 θ p = 2 τ x y σ x − σ y = 2 ( 30 ) 120 − 40 = 60 80 = 0.75 \tan 2\theta_p = \frac{2\tau_{xy}}{\sigma_x - \sigma_y} = \frac{2(30)}{120 - 40} = \frac{60}{80} = 0.75 tan 2 θ p ​ = σ x ​ − σ y ​ 2 τ x y ​ ​ = 120 − 40 2 ( 30 ) ​ = 80 60 ​ = 0.75 2 θ p = arctan ⁡ ( 0.75 ) = 36.87 ∘ ⟹ θ p 1 = 18.43 ∘ 2\theta_p = \arctan(0.75) = 36.87^{\circ} \implies \mathbf{\theta_{p1} = 18.43^{\circ}} 2 θ p ​ = arctan ( 0.75 ) = 36.8 7 ∘ ⟹ θ p1 ​ = 18.4 3 ∘

3. Maximum In-Plane Shear Stress: τ in-plane , max ⁡ = σ 1 − σ 2 2 = 130 − 30 2 = 50 MPa \tau_{\text{in-plane},\max} = \frac{\sigma_1 - \sigma_2}{2} = \frac{130 - 30}{2} = \mathbf{50\text{ MPa}} τ in-plane , m a x ​ = 2 σ 1 ​ − σ 2 ​ ​ = 2 130 − 30 ​ = 50 MPa

4. Absolute Maximum Shear Stress in 3D: Since σ 1 = 130 MPa > 0 \sigma_1 = 130\text{ MPa} > 0 σ 1 ​ = 130 MPa > 0 and σ 2 = 30 MPa > 0 \sigma_2 = 30\text{ MPa} > 0 σ 2 ​ = 30 MPa > 0 (both tensile, plane stress σ 3 = 0 \sigma_3 = 0 σ 3 ​ = 0 ):

Ordered principal stresses: σ 1 = 130 , σ 2 = 30 , σ 3 = 0 \sigma_1 = 130, \sigma_2 = 30, \sigma_3 = 0 σ 1 ​ = 130 , σ 2 ​ = 30 , σ 3 ​ = 0 . τ abs , max ⁡ = σ 1 − σ 3 2 = 130 − 0 2 = 65 MPa \tau_{\text{abs},\max} = \frac{\sigma_1 - \sigma_3}{2} = \frac{130 - 0}{2} = \mathbf{65\text{ MPa}} τ abs , m a x ​ = 2 σ 1 ​ − σ 3 ​ ​ = 2 130 − 0 ​ = 65 MPa (Note: τ abs , max ⁡ = 65 MPa \tau_{\text{abs},\max} = 65\text{ MPa} τ abs , m a x ​ = 65 MPa is greater than τ in-plane , max ⁡ = 50 MPa \tau_{\text{in-plane},\max} = 50\text{ MPa} τ in-plane , m a x ​ = 50 MPa !).

Example 2: Cantilever Deflection via Castigliano's Theorem

Problem: Use Castigliano's Theorem to find the vertical tip deflection δ \delta δ of a cantilever beam of span L L L , flexural rigidity E I EI E I , carrying a point load W W W at its free tip.

Solution:

Coordinate x x x measured from free end ( 0 ≤ x ≤ L 0 \le x \le L 0 ≤ x ≤ L ):

Bending moment at section x x x : M ( x ) = − W x M(x) = -W x M ( x ) = − W x .

Total strain energy in bending: U = ∫ 0 L M 2 ( x ) 2 E I d x = ∫ 0 L ( − W x ) 2 2 E I d x = W 2 2 E I ∫ 0 L x 2 d x = W 2 L 3 6 E I U = \int_0^L \frac{M^2(x)}{2EI} dx = \int_0^L \frac{(-Wx)^2}{2EI} dx = \frac{W^2}{2EI} \int_0^L x^2 dx = \frac{W^2 L^3}{6EI} U = ∫ 0 L ​ 2 E I M 2 ( x ) ​ d x = ∫ 0 L ​ 2 E I ( − W x ) 2 ​ d x = 2 E I W 2 ​ ∫ 0 L ​ x 2 d x = 6 E I W 2 L 3 ​

Applying Castigliano's theorem with respect to load W W W : δ = ∂ U ∂ W = ∂ ∂ W ( W 2 L 3 6 E I ) = W L 3 3 E I \delta = \frac{\partial U}{\partial W} = \frac{\partial}{\partial W}\left(\frac{W^2 L^3}{6EI}\right) = \mathbf{\frac{W L^3}{3EI}} δ = ∂ W ∂ U ​ = ∂ W ∂ ​ ( 6 E I W 2 L 3 ​ ) = 3EI W L 3 ​