Study guide
9.2 Cams & Followers, Toothed Gearing & Epicyclic Gear Trains
Coal India Management Trainee CIL MT
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: CIL MT Exam Overview & Coal Sector Landscape
1.1 CIL MT Exam Pattern, Marking Scheme & Strategy 1.2 Coal India Limited: Corporate Structure, Maharatna Status & Subsidiaries 1.3 Indian Coal Mining Sector, Energy Mix & Environmental Regulations
2 Chapter 2: Paper-I General Awareness, Polity & Current Affairs
2.1 Indian Constitution, Governance & Statutory Bodies 2.2 Indian Economy, Union Budget & Economic Planning 2.3 Indian Geography, Mineral Belts & Environmental Ecology 2.4 Modern Indian History, Freedom Struggle & Cultural Heritage 2.5 General Science: Physics, Chemistry & Biology Fundamentals 2.6 Inventions, Discoveries & Scientific-Technological Development 2.7 Uses of Internet, Computer Awareness & Digital Governance 2.8 National & International Organisations 2.9 Awards, Honours & Sports 2.10 Books & Authors, Important Monuments & Places of India 2.11 Ports, Power Plants & Infrastructure of India 2.12 Climate Change, SDGs, National Parks & Wildlife Sanctuaries 2.13 Flagship Government Programmes & Current Affairs Method 2.14 World Physical, Social & Economic Geography
3 Chapter 3: Paper-I Reasoning & Logical Ability
3.1 Series Completion, Coding-Decoding & Semantic Analogies 3.2 Syllogisms, Logical Deduction & Venn Diagrams 3.3 Seating Arrangements, Linear/Circular Alignments & Puzzles 3.4 Direction Sense, Blood Relations & Order/Ranking 3.5 Alphabetical & Alphanumeric Series 3.6 Statement & Conclusions, Statement & Arguments 3.7 Clocks & Calendars 3.8 Cubes, Dice & Figure Counting 3.9 Mirror Images, Water Images, Embedded Figures & Non-Verbal Series 3.10 Decision Making & Data Analysis in Reasoning
4 Chapter 4: Paper-I Numerical Ability & Quantitative Aptitude
4.1 Arithmetic Foundations: Percentages, Profit & Loss, Ratio & Proportion 4.2 Averages, Simple/Compound Interest, Alligations & Mixtures 4.3 Time & Work, Pipes & Cisterns, Time, Speed & Distance 4.4 Algebra, Mensuration, Geometry & Data Interpretation (DI) 4.5 Number System, LCM, HCF & Decimal Fractions 4.6 Surds, Indices & Simplification 4.7 Problems on Ages 4.8 Boats & Streams and Problems on Trains 4.9 Permutations & Combinations 4.10 Probability for Quantitative Aptitude
5 Chapter 5: Paper-I General English & Verbal Ability
5.1 English Grammar, Error Spotting & Sentence Correction 5.2 Vocabulary Building: Synonyms, Antonyms, Idioms & Phrases 5.3 Reading Comprehension, Cloze Tests & Para Jumbles 5.4 Fill in the Blanks, Cloze Passages & Sentence Completion 5.5 Jumbled Sentences & Sentence Improvement
6 Chapter 6: Paper-II Engineering Mathematics
6.1 Matrix Algebra, Rank & Systems of Linear Equations 6.2 Eigenvalues, Eigenvectors & the Cayley-Hamilton Theorem 6.3 Limits, Continuity, Differentiability & Mean Value Theorems 6.4 Maxima-Minima, Indeterminate Forms & Taylor Series 6.5 Definite, Improper, Double & Triple Integrals 6.6 Partial Derivatives, Total Derivative & Multivariable Optimisation 6.7 First-Order Differential Equations: Linear & Non-Linear 6.8 Higher-Order Linear Differential Equations & Engineering Applications 6.9 Laplace Transforms & Transfer-Function Methods 6.10 Probability, Conditional Probability & Bayes' Theorem 6.11 Random Variables, Distributions & Descriptive Statistics 6.12 Numerical Methods: Root Finding, Integration & ODE Solvers
7 Chapter 7: Paper-II Engineering Mechanics & Statics-Dynamics
7.1 Force Systems, Coplanar Equilibrium & Lami's Theorem 7.2 Plane Trusses, Friction Mechanics & Screws/Wedges 7.3 Centroids, Center of Gravity & Moment of Inertia 7.4 Kinematics, Kinetics of Particles & Rigid Body Dynamics 7.5 Virtual Work & Lagrange's Equation 7.6 Rolling Friction, Belt-Pulley Drives, Brakes, Clutches & Vehicle Dynamics
8 Chapter 8: Paper-II Mechanics of Materials & Structural Integrity
8.1 Simple Stresses, Strains, Elastic Moduli & Thermal Stresses 8.2 Principal Stresses, Strain Energy & Mohr's Circle 8.3 Shear Force & Bending Moment Diagrams, Beam Bending & Shear Stresses 8.4 Torsion of Circular Shafts, Springs & Column Buckling 8.5 Thin Cylinders, Spheres & Thick-Walled Pressure Vessels 8.6 Deflection of Beams: Double Integration, Macaulay & Moment-Area 8.7 Shear Centre & Unsymmetrical Bending 8.8 Strain Gauges, Rosettes & Experimental Stress Analysis 8.9 Mechanical Testing: Universal Testing Machine, Hardness & Impact
9 Chapter 9: Paper-II Theory of Machines & Mechanical Vibrations
9.1 Simple Mechanisms, Kinematic Inversions & Velocity/Acceleration Diagrams 9.2 Cams & Followers, Toothed Gearing & Epicyclic Gear Trains 9.3 Flywheels, Centrifugal/Inertia Governors & Rotor Balancing 9.4 Free, Damped & Forced Single-Degree-of-Freedom Vibrations 9.5 Gyroscopic Couple & Gyroscopic Effects
10 Chapter 10: Paper-II Machine Design & Failure Theories
10.1 Static Failure Theories & Variable/Fatigue Loading 10.2 Design of Threaded Fasteners, Welded & Riveted Joints 10.3 Design of Shafts, Keys, Couplings & Rolling/Sliding Bearings 10.4 Design of Spur, Helical, Bevel & Worm Gears 10.5 Design of Helical, Leaf & Torsion Springs 10.6 Design of Brakes & Clutches: Energy, Lining Pressure & Heat
11 Chapter 11: Paper-II Fluid Mechanics & Hydraulic Machinery
11.1 Fluid Properties, Hydrostatic Forces & Buoyancy 11.2 Fluid Kinematics, Continuity & Bernoulli's Equation 11.3 Viscous Flow in Pipes, Boundary Layer & Minor Losses 11.4 Hydraulic Turbines, Centrifugal & Reciprocating Pumps 11.5 Dimensional Analysis, Similitude & Model Testing 11.6 Control-Volume Analysis: Continuity, Momentum & Energy
12 Chapter 12: Paper-II Thermodynamics, Thermal Cycles & Turbomachinery
12.1 Fundamental Concepts, First & Second Laws of Thermodynamics 12.2 Entropy, Availability, Exergy & Properties of Pure Substances 12.3 Air-Standard Gas Power Cycles: Otto, Diesel, Dual & Brayton 12.4 Vapour Power Cycles: Ideal, Reheat & Regenerative Rankine Cycles 12.5 Thermodynamic Relations: Maxwell, Clausius-Clapeyron & Joule-Thomson 12.6 Behaviour of Ideal & Real Gases and Equations of State 12.7 Air & Gas Compressors: Reciprocating, Rotary & Multi-Stage 12.8 Steam & Gas Turbines: Impulse, Reaction & Velocity Diagrams
13 Chapter 13: Paper-II Heat Transfer, Refrigeration & Air Conditioning
13.1 Steady & Unsteady Conduction, Extended Surfaces (Fins) 13.2 Forced/Natural Convection, Radiation & Heat Exchanger LMTD/NTU 13.3 Vapour Compression & Vapour Absorption Refrigeration Systems 13.4 Psychrometric Properties, Processes & Air Conditioning Systems 13.5 Gas Refrigeration, Heat Pump Cycles & Cryogenics
14 Chapter 14: Paper-II Materials Science, Metallurgy & Manufacturing Technology
14.1 Crystal Structures, Phase Diagrams & Iron-Iron Carbide Equilibrium 14.2 Heat Treatment Processes & Engineering Alloy Steels 14.3 Casting Processes, Metal Forming & Welding Metallurgy 14.4 Metal Cutting Mechanics, Tool Life & Machine Tools 14.5 Plastic Deformation, Yield Criteria & Load Estimation in Bulk Forming 14.6 Sheet Metal Forming: Shearing, Bending & Deep Drawing 14.7 Powder Metallurgy 14.8 Brazing, Soldering & Adhesive Bonding 14.9 Non-Traditional Machining: EDM, ECM, USM, AJM, LBM & EBM 14.10 Abrasive Machining, Grinding & Superfinishing 14.11 Principles of Work Holding, Jigs & Fixtures 14.12 Economics of Machining & Tool Life Optimisation
15 Chapter 15: Paper-II Metrology, Quality Control & Industrial Engineering / OR
15.1 Limits, Fits, Tolerances, Gauges & Surface Metrology 15.2 Production Planning, Forecasting & Inventory Control Models 15.3 Operations Research: Linear Programming & Transportation/Assignment 15.4 Project Management: CPM, PERT, Network Analysis & Crashing 15.5 Comparators & Interferometry 15.6 Coordinate Measuring Machines & Machine Tool Alignment Testing 15.7 Computer Integrated Manufacturing: CAD/CAM & Integration Tools 15.8 NC/CNC Machines & CNC Part Programming 15.9 Material Requirements Planning, Scheduling & Sequencing 15.10 Queuing Theory & Simple Queuing Models 15.11 Network Flow Models: Shortest Route, Maximal Flow & Spanning Tree
9.2 Cams & Followers, Toothed Gearing & Epicyclic Gear Trains
Key Takeaways Explain This Topic AI
Cycloidal follower motion eliminates infinite jerk discontinuities at dwell boundaries, making it the premier motion profile for high-speed dynamic cam applications.
The Fundamental Law of Gearing requires the common normal at the point of contact between two mating gear teeth to always pass through the fixed pitch point.
Interference in involute gears occurs when contact takes place inside the base circle, requiring a minimum number of pinion teeth Z min = 2 a r / sin 2 ϕ Z_{\min} = 2a_r / \sin^2\phi Z m i n = 2 a r / sin 2 ϕ for rack meshing.
Involute tooth profiles maintain a constant pressure angle and allow variation in shaft center distance without altering the exact angular velocity ratio.
Epicyclic gear trains are solved using the tabular method by superimposing relative rotation with the carrier arm fixed and rigid-body rotation of the entire assembly.
Last updated: August 2026
Cams & Followers, Toothed Gearing & Epicyclic Gear Trains
Quick Reference: For high-speed cams, cycloidal motion avoids dynamic shock by maintaining finite jerk throughout the stroke. The fundamental law of gearing requires the common normal to pass through the pitch point P P P . Minimum pinion teeth to prevent interference with a rack is Z min = 2 a r / sin 2 ϕ Z_{\min} = 2a_r / \sin^2\phi Z m i n = 2 a r / sin 2 ϕ ( 18 18 18 teeth for standard 20 ∘ 20^{\circ} 2 0 ∘ full-depth). Epicyclic gear trains are solved systematically via the tabular superposition method.
In mining mechanical engineering, gear transmissions and cam mechanisms drive critical machinery: multi-stage reduction planetary drives in coal shearers, dragline walking mechanisms, heavy conveyor gearboxes, and internal combustion valve trains. Precision kinematic design ensures high power density, reliability, and smooth transmission under extreme operating torques.
- 1. Cam & Follower Kinematics
- Cam Terminology & Geometric Parameters
Base Circle: Smallest circle tangent to the cam profile drawn from the camshaft center. Its radius ( r b r_b r b ) dictates the overall size of the cam.
Prime Circle: Smallest circle drawn from the camshaft center tangent to the pitch curve . For a knife-edge follower, prime circle equals base circle; for a roller follower of radius r r r_r r r , r p = r b + r r r_p = r_b + r_r r p = r b + r r .
Pitch Curve: The locus of the follower trace point as the follower traverses the rotating cam profile.
Pressure Angle ( ϕ \phi ϕ ): The angle between the direction of the follower motion and the normal to the pitch curve at the point of contact. tan ϕ = 1 r d s d θ \tan\phi = \frac{1}{r} \frac{ds}{d\theta} tan ϕ = r 1 d θ d s
Design Rule for Pressure Angle: High pressure angles cause severe lateral side thrust, resulting in follower jamming in its guide bushings. In practice:
For translating roller followers: Maximum pressure angle ϕ max ≤ 30 ∘ \phi_{\max} \le 30^{\circ} ϕ m a x ≤ 3 0 ∘ .
For translating flat-faced followers: ϕ = 0 ∘ \phi = 0^{\circ} ϕ = 0 ∘ continuously (side thrust is virtually eliminated, but bending moments on the stem increase).
To decrease pressure angle: Increase base circle radius r b r_b r b , increase follower lift angle θ o \theta_o θ o , or introduce an optimal follower offset e e e .
2. Follower Motion Profiles & Dynamic Comparison
Let h = Total follower stroke (lift) h = \text{Total follower stroke (lift)} h = Total follower stroke (lift) , θ o = Total cam angle of ascent/descent \theta_o = \text{Total cam angle of ascent/descent} θ o = Total cam angle of ascent/descent , and ω = d θ / d t = Cam angular speed \omega = d\theta/dt = \text{Cam angular speed} ω = d θ / d t = Cam angular speed . +-----------------------------------------------------------------------------------------+
- | FOLLOWER MOTION KINEMATIC FORMULAS |
- +-----------------------------------------------------------------------------------------+
- | Motion Profile | Displacement s(theta) | Max Velocity v_max | Max Accel a_max |
- +---------------------+------------------------------+----------------------+---------------------+
- | Uniform Velocity | h * (theta / theta_o) | (h * w) / theta_o | Infinite (at ends) |
- | Simple Harmonic | (h/2)*[1 - cos(pi*th/th_o)] | (pi*h*w)/(2*th_o) | (pi^2*h*w^2)/(2*th_o^2)|
- | Uniform Accel (UARM)| 2h*(th/th_o)^2 [first half] | (2*h*w)/th_o | (4*h*w^2)/th_o^2 |
- | Cycloidal | h*[(th/th_o) - sin(2pi*th/th_o)/(2pi)] | (2*h*w)/th_o | (2pi*h*w^2)/th_o^2 |
+-----------------------------------------------------------------------------------------+ ACCELERATION CURVES COMPARISON:
1. SHM Accel: 2. Parabolic Accel: 3. Cycloidal Accel:
- +a_max |\ +a |+-------+ +a_max | /---\
- | \ | | | / \
- 0 ---+--\-----+-- |--------+------- +--+-----+--+---
- \ | | | \ / |
- \ | +--------|-a \---/ -a_max
- \|-a_max
- (Finite ends -> Inf Jerk) (Step jumps -> Inf Jerk) (Zero ends -> Finite Jerk)
Industrial Selection Criterion:
Uniform Velocity: Unacceptable in dynamic machinery due to infinite accelerations (infinite impact force F = m ⋅ a F = m \cdot a F = m ⋅ a ) at stroke boundaries.
Simple Harmonic Motion (SHM): Excellent for low-to-moderate speed machinery. However, at θ = 0 \theta = 0 θ = 0 and θ = θ o \theta = \theta_o θ = θ o , acceleration has finite non-zero values that jump instantly to zero during dwell, causing infinite jerk ( j = d a / d t → ∞ j = da/dt \to \infty j = d a / d t → ∞ ) and severe acoustic chatter.
Uniform Acceleration and Retardation (UARM / Parabolic): Yields the minimum possible peak acceleration for a given lift and angle, but exhibits step changes in acceleration at start, midpoint, and end.
Cycloidal Motion: Acceleration starts from zero, varies smoothly as a sine curve, and returns to zero at the end of the stroke. Jerk is finite everywhere . This makes cycloidal profiles mandatory for high-speed automated systems, IC engine valve trains, and heavy mining vibratory feeders.
- 3. Toothed Gearing & The Law of Gearing
- The Fundamental Law of Gearing
Law of Gearing: For two meshing gear teeth to transmit a constant angular velocity ratio, the common normal to the tooth profiles at the point of contact must, in all positions of contact, pass through a fixed point on the line of centers known as the pitch point ( P P P ) . ω 1 ω 2 = O 2 P O 1 P = R 2 R 1 = Z 2 Z 1 = Constant \frac{\omega_1}{\omega_2} = \frac{O_2 P}{O_1 P} = \frac{R_2}{R_1} = \frac{Z_2}{Z_1} = \text{Constant} ω 2 ω 1 = O 1 P O 2 P = R 1 R 2 = Z 1 Z 2 = Constant O_1 (Pinion Center)
- o
- \
- \ R_1
- \
- o P (Pitch Point) ======= Common Normal (Line of Action)
- / passes through P at angle phi
- /
- / R_2
- o
- O_2 (Gear Center)
- Involute vs. Cycloidal Profiles
Feature / Property Involute Teeth Cycloidal Teeth
Profile Generation Locus of a point on a taut string unwinding from a base circle Locus of a point on a circle rolling on the inside/outside of a pitch circle
Center Distance Sensitivity Insensitive: Velocity ratio remains exactly constant even if center distance varies slightly Sensitive: Velocity ratio changes if center distance is altered from design setting
Pressure Angle Constant throughout contact along the straight line of action Variable: Maximum at engagement, zero at pitch point, maximum at disengagement
Manufacturing & Tooling Simple: Hob cutters and rack cutters have straight flat cutting edges Complex: Requires specialized cutters for hypocycloid and epicycloid curves
Interference Risk Prone to interference when pinion has fewer teeth than Z min Z_{\min} Z m i n Free from interference; flank is naturally convex-concave
Primary Application Automotive, industrial drives, mining transmissions ( > 98 % >98\% > 98% of all gears) Precision horology, mechanical clocks, dial indicators
- 4. Interference & Undercutting in Involute Gears
- Mechanism of Interference
Involute profile geometry exists only outside the base circle . If the addendum of the mating gear is excessively large, the tip of the gear tooth makes contact with the pinion tooth flank below the pinion's base circle on the radial non-involute portion. During cutting or operation, this causes the gear tip to gouge out material from the pinion root flank—a destructive phenomenon termed undercutting that severely weakens tooth root strength. Interference Boundary Condition:
- Base Circle Pinion o-----------------------------o Base Circle Gear
- \ | /
- \ Line of /
- \ Action /
- \ | /
- Point of Tangency (K) Point of Tangency (L)
Interference occurs if tip circle of gear crosses tangency point K!
Contact Parameters:
Path of Contact ( K L KL K L ): K L = Path of Approach ( K P ) + Path of Recess ( P L ) KL = \text{Path of Approach } (KP) + \text{Path of Recess } (PL) K L = Path of Approach ( K P ) + Path of Recess ( P L ) K L = R A 2 − R 2 cos 2 ϕ + r A 2 − r 2 cos 2 ϕ − ( R + r ) sin ϕ KL = \sqrt{R_A^2 - R^2 \cos^2\phi} + \sqrt{r_A^2 - r^2 \cos^2\phi} - (R + r)\sin\phi K L = R A 2 − R 2 cos 2 ϕ + r A 2 − r 2 cos 2 ϕ − ( R + r ) sin ϕ Where R A , r A R_A, r_A R A , r A are addendum circle radii, R , r R, r R , r are pitch circle radii, and ϕ \phi ϕ is pressure angle.
Arc of Contact: Arc of Contact = Path of Contact cos ϕ \text{Arc of Contact} = \frac{\text{Path of Contact}}{\cos\phi} Arc of Contact = cos ϕ Path of Contact
Contact Ratio ( CR \text{CR} CR ): CR = Arc of Contact p c = K L π m cos ϕ ≥ 1.2 to 1.4 \text{CR} = \frac{\text{Arc of Contact}}{p_c} = \frac{KL}{\pi m \cos\phi} \ge 1.2\text{ to }1.4 CR = p c Arc of Contact = πm cos ϕ K L ≥ 1.2 to 1.4
Minimum Number of Teeth to Avoid Interference:
Pinion Meshing with an Identical Rack: Z min = 2 a r sin 2 ϕ Z_{\min} = \frac{2 a_r}{\sin^2\phi} Z m i n = sin 2 ϕ 2 a r
Where a r a_r a r is the rack addendum fraction ( a r = 1.0 a_r = 1.0 a r = 1.0 for standard full-depth teeth).
For ϕ = 14.5 ∘ \phi = 14.5^{\circ} ϕ = 14. 5 ∘ : Z min = 2 × 1 sin 2 ( 14.5 ∘ ) = 31.9 ≈ 32 teeth Z_{\min} = \frac{2 \times 1}{\sin^2(14.5^{\circ})} = 31.9 \approx 32\text{ teeth} Z m i n = s i n 2 ( 14. 5 ∘ ) 2 × 1 = 31.9 ≈ 32 teeth .
For ϕ = 20.0 ∘ \phi = 20.0^{\circ} ϕ = 20. 0 ∘ : Z min = 2 × 1 sin 2 ( 20 ∘ ) = 2 0.11698 = 17.1 ≈ 18 teeth Z_{\min} = \frac{2 \times 1}{\sin^2(20^{\circ})} = \frac{2}{0.11698} = 17.1 \approx 18\text{ teeth} Z m i n = s i n 2 ( 2 0 ∘ ) 2 × 1 = 0.11698 2 = 17.1 ≈ 18 teeth .
For ϕ = 25.0 ∘ \phi = 25.0^{\circ} ϕ = 25. 0 ∘ : Z min = 2 × 1 sin 2 ( 25 ∘ ) = 11.2 ≈ 12 teeth Z_{\min} = \frac{2 \times 1}{\sin^2(25^{\circ})} = 11.2 \approx 12\text{ teeth} Z m i n = s i n 2 ( 2 5 ∘ ) 2 × 1 = 11.2 ≈ 12 teeth .
Pinion Meshing with a Gear of Gear Ratio G = Z G / Z P = T / t G = Z_G / Z_P = T / t G = Z G / Z P = T / t : Z min = 2 a p 1 + 1 G ( 1 G + 2 ) sin 2 ϕ − 1 Z_{\min} = \frac{2 a_p}{\sqrt{1 + \frac{1}{G}\left(\frac{1}{G} + 2\right)\sin^2\phi} - 1} Z m i n = 1 + G 1 ( G 1 + 2 ) sin 2 ϕ − 1 2 a p
Remedial Measures to Eliminate Interference:
Increase the number of teeth on the pinion ( Z P ≥ Z min Z_P \ge Z_{\min} Z P ≥ Z m i n ).
Increase the pressure angle (e.g., transition from 14.5 ∘ 14.5^{\circ} 14. 5 ∘ to 20 ∘ 20^{\circ} 2 0 ∘ or 25 ∘ 25^{\circ} 2 5 ∘ ).
Stub the tooth addendum ( a p = 0.8 m a_p = 0.8m a p = 0.8 m instead of 1.0 m 1.0m 1.0 m ).
Apply profile shift (addendum modification) by displacing the cutter rack outwards.
Loading diagram... Epicyclic Planetary Gear Train Architecture
- 5. Gear Trains & Epicyclic Gear Systems
- Classification of Gear Trains
Simple Gear Train: Each shaft carries only one gear. Intermediate idler gears change rotational direction but do not influence the overall velocity ratio.
Compound Gear Train: At least one intermediate shaft carries two or more rigidly keyed gears. Enables massive velocity reductions in compact spaces.
Reverted Gear Train: The input driving shaft and the output driven shaft are coaxial (share the same centerline). Essential for automotive manual transmissions, machine tool speed boxes, and industrial clocks.
Center distance requirement for identical module m m m : r 1 + r 2 = r 3 + r 4 ⟹ Z 1 + Z 2 = Z 3 + Z 4 r_1 + r_2 = r_3 + r_4 \implies Z_1 + Z_2 = Z_3 + Z_4 r 1 + r 2 = r 3 + r 4 ⟹ Z 1 + Z 2 = Z 3 + Z 4
Epicyclic (Planetary) Gear Train: One or more gear axes rotate relative to a fixed frame around the central axis of another gear.
Tabular Method for Epicyclic Gear Trains
Consider a planetary system consisting of a Sun gear S S S ( Z S Z_S Z S ), Planet gear P P P ( Z P Z_P Z P ), Internal Ring gear R R R ( Z R Z_R Z R ), and Carrier Arm A A A .
Geometric Relationship: d R = d S + 2 d P ⟹ Z R = Z S + 2 Z P ( for identical module ) d_R = d_S + 2 d_P \implies Z_R = Z_S + 2 Z_P \quad (\text{for identical module}) d R = d S + 2 d P ⟹ Z R = Z S + 2 Z P ( for identical module )
Step Operational Condition Arm A A A Sun Gear S S S Planet Gear P P P Ring Gear R R R
1 Fix Arm A A A , rotate Sun S S S by + x +x + x rev 0 0 0 + x +x + x − x ( Z S Z P ) -x \left(\frac{Z_S}{Z_P}\right) − x ( Z P Z S ) − x ( Z S Z R ) -x \left(\frac{Z_S}{Z_R}\right) − x ( Z R Z S )
2 Add + y +y + y rev to all components + y +y + y + y +y + y + y +y + y + y +y + y
3 Total Motion (Superposition) + y +y + y y + x y + x y + x y − x ( Z S Z P ) y - x \left(\frac{Z_S}{Z_P}\right) y − x ( Z P Z S ) y − x ( Z S Z R ) y - x \left(\frac{Z_S}{Z_R}\right) y − x ( Z R Z S )
Torque Relationships in Epicyclic Gear Trains
In an ideal lossless epicyclic gear train in steady state:
Static Torque Equilibrium: ∑ T = 0 ⟹ T S + T A + T R = 0 \sum T = 0 \implies T_S + T_A + T_R = 0 ∑ T = 0 ⟹ T S + T A + T R = 0
Power Balance (Conservation of Energy): ∑ T i ω i = 0 ⟹ T S ω S + T A ω A + T R ω R = 0 \sum T_i \omega_i = 0 \implies T_S \omega_S + T_A \omega_A + T_R \omega_R = 0 ∑ T i ω i = 0 ⟹ T S ω S + T A ω A + T R ω R = 0
- 6. Worked Numerical Examples
- Example 1: Planetary Reduction Drive in a Mining Hauler
Problem: An epicyclic gear reduction box has a sun gear S S S with 24 teeth and an internal ring gear R R R with 96 teeth. The planet gear P P P meshes internally with R R R and externally with S S S . The sun gear is driven by an electric motor at + 1200 rpm +1200\text{ rpm} + 1200 rpm clockwise, and the ring gear R R R is held stationary ( N R = 0 N_R = 0 N R = 0 ). Calculate:
The number of teeth on the planet gear P P P .
The rotational speed and direction of the carrier arm A A A .
The torque on the carrier arm A A A if the input torque on the sun gear is T S = 250 N ⋅ m T_S = 250\text{ N}\cdot\text{m} T S = 250 N ⋅ m (assuming 100 % 100\% 100% transmission efficiency).
Solution:
Determine Planet Teeth ( Z P Z_P Z P ): Z R = Z S + 2 Z P ⟹ 96 = 24 + 2 Z P ⟹ 2 Z P = 72 ⟹ Z P = 36 teeth Z_R = Z_S + 2 Z_P \implies 96 = 24 + 2 Z_P \implies 2 Z_P = 72 \implies Z_P = 36\text{ teeth} Z R = Z S + 2 Z P ⟹ 96 = 24 + 2 Z P ⟹ 2 Z P = 72 ⟹ Z P = 36 teeth
Kinematic Equations from Tabular Method:
Sun speed: N S = y + x = + 1200 rpm N_S = y + x = +1200\text{ rpm} N S = y + x = + 1200 rpm
Ring speed: N R = y − x ( Z S Z R ) = 0 N_R = y - x \left(\frac{Z_S}{Z_R}\right) = 0 N R = y − x ( Z R Z S ) = 0
Substitute Z S / Z R = 24 / 96 = 1 / 4 Z_S / Z_R = 24 / 96 = 1/4 Z S / Z R = 24/96 = 1/4 into the ring equation: y − 1 4 x = 0 ⟹ x = 4 y y - \frac{1}{4}x = 0 \implies x = 4y y − 4 1 x = 0 ⟹ x = 4 y
Substitute x = 4 y x = 4y x = 4 y into the sun equation: y + 4 y = 1200 ⟹ 5 y = 1200 ⟹ y = + 240 rpm y + 4y = 1200 \implies 5y = 1200 \implies y = +240\text{ rpm} y + 4 y = 1200 ⟹ 5 y = 1200 ⟹ y = + 240 rpm x = 4 ( 240 ) = + 960 rpm x = 4(240) = +960\text{ rpm} x = 4 ( 240 ) = + 960 rpm
Therefore, carrier arm speed N A = y = + 240 rpm N_A = y = +240\text{ rpm} N A = y = + 240 rpm ( Clockwise ). Gear reduction ratio = 1200 / 240 = 5 : 1 = 1200 / 240 = 5:1 = 1200/240 = 5 : 1 .
Torque Calculation:
Power in = = = Power out ⟹ T S ω S + T A ω A + T R ω R = 0 \implies T_S \omega_S + T_A \omega_A + T_R \omega_R = 0 ⟹ T S ω S + T A ω A + T R ω R = 0 Since N R = 0 N_R = 0 N R = 0 , T R ω R = 0 T_R \omega_R = 0 T R ω R = 0 : T S N S + T A N A = 0 ⟹ ( 250 ) ( 1200 ) + T A ( 240 ) = 0 T_S N_S + T_A N_A = 0 \implies (250) (1200) + T_A (240) = 0 T S N S + T A N A = 0 ⟹ ( 250 ) ( 1200 ) + T A ( 240 ) = 0 T A = − 250 × 1200 240 = − 1250 N ⋅ m T_A = -\frac{250 \times 1200}{240} = -1250\text{ N}\cdot\text{m} T A = − 240 250 × 1200 = − 1250 N ⋅ m
(The negative sign indicates the resisting torque on the arm opposes its motion, so output drive torque = + 1250 N ⋅ m = +1250\text{ N}\cdot\text{m} = + 1250 N ⋅ m in clockwise direction).
Holding Torque on Fixed Ring ( T R T_R T R ): T S + T A + T R = 0 ⟹ 250 − 1250 + T R = 0 ⟹ T R = + 1000 N ⋅ m T_S + T_A + T_R = 0 \implies 250 - 1250 + T_R = 0 \implies T_R = +1000\text{ N}\cdot\text{m} T S + T A + T R = 0 ⟹ 250 − 1250 + T R = 0 ⟹ T R = + 1000 N ⋅ m
Example 2: Involute Gear Interference Sizing
Problem: A 20 ∘ 20^{\circ} 2 0 ∘ full-depth pinion of module m = 8 mm m = 8\text{ mm} m = 8 mm with 20 teeth drives a gear of 60 teeth. Determine whether interference will occur, and calculate the maximum permissible addendum on the gear to prevent interference.
Solution:
Gear Parameters:
Pressure angle ϕ = 20 ∘ \phi = 20^{\circ} ϕ = 2 0 ∘ , Pinion pitch radius r = m Z P 2 = 8 × 20 2 = 80 mm r = \frac{m Z_P}{2} = \frac{8 \times 20}{2} = 80\text{ mm} r = 2 m Z P = 2 8 × 20 = 80 mm
Gear pitch radius R = m Z G 2 = 8 × 60 2 = 240 mm R = \frac{m Z_G}{2} = \frac{8 \times 60}{2} = 240\text{ mm} R = 2 m Z G = 2 8 × 60 = 240 mm
Gear ratio G = Z G / Z P = 60 / 20 = 3 G = Z_G / Z_P = 60 / 20 = 3 G = Z G / Z P = 60/20 = 3
Minimum Pinion Teeth for G = 3 G = 3 G = 3 without Interference: Z min = 2 a p 1 + 1 G ( 1 G + 2 ) sin 2 ϕ − 1 Z_{\min} = \frac{2 a_p}{\sqrt{1 + \frac{1}{G}\left(\frac{1}{G} + 2\right)\sin^2\phi} - 1} Z m i n = 1 + G 1 ( G 1 + 2 ) sin 2 ϕ − 1 2 a p
For standard addendum a p = 1.0 a_p = 1.0 a p = 1.0 : Z min = 2 1 + 1 3 ( 7 3 ) sin 2 ( 20 ∘ ) − 1 = 2 1 + ( 0.7778 ) ( 0.11698 ) − 1 = 2 1.09098 − 1 = 2 1.0445 − 1 = 2 0.0445 ≈ 44.9 Z_{\min} = \frac{2}{\sqrt{1 + \frac{1}{3}\left(\frac{7}{3}\right)\sin^2(20^{\circ})} - 1} = \frac{2}{\sqrt{1 + (0.7778)(0.11698)} - 1} = \frac{2}{\sqrt{1.09098} - 1} = \frac{2}{1.0445 - 1} = \frac{2}{0.0445} \approx 44.9 Z m i n = 1 + 3 1 ( 3 7 ) sin 2 ( 2 0 ∘ ) − 1 2 = 1 + ( 0.7778 ) ( 0.11698 ) − 1 2 = 1.09098 − 1 2 = 1.0445 − 1 2 = 0.0445 2 ≈ 44.9
Because the actual pinion has only 20 teeth ( 20 < 44.9 20 < 44.9 20 < 44.9 ), standard addendum ( a g = 1.0 m = 8 mm a_g = 1.0m = 8\text{ mm} a g = 1.0 m = 8 mm ) will produce severe interference .
Maximum Addendum Radius ( R A , max R_{A,\max} R A , m a x ) to Prevent Interference: The tip of the gear tooth must not cross the tangent point K K K on the pinion base circle: R A , max = R 2 cos 2 ϕ + ( R + r ) 2 sin 2 ϕ R_{A,\max} = \sqrt{R^2 \cos^2\phi + (R + r)^2 \sin^2\phi} R A , m a x = R 2 cos 2 ϕ + ( R + r ) 2 sin 2 ϕ R A , max = ( 240 ) 2 cos 2 ( 20 ∘ ) + ( 240 + 80 ) 2 sin 2 ( 20 ∘ ) R_{A,\max} = \sqrt{(240)^2 \cos^2(20^{\circ}) + (240 + 80)^2 \sin^2(20^{\circ})} R A , m a x = ( 240 ) 2 cos 2 ( 2 0 ∘ ) + ( 240 + 80 ) 2 sin 2 ( 2 0 ∘ ) R A , max = 57600 ( 0.88302 ) + ( 320 ) 2 ( 0.11698 ) = 50862 + 102400 ( 0.11698 ) = 50862 + 11979 = 62841 ≈ 250.68 mm R_{A,\max} = \sqrt{57600(0.88302) + (320)^2(0.11698)} = \sqrt{50862 + 102400(0.11698)} = \sqrt{50862 + 11979} = \sqrt{62841} \approx 250.68\text{ mm} R A , m a x = 57600 ( 0.88302 ) + ( 320 ) 2 ( 0.11698 ) = 50862 + 102400 ( 0.11698 ) = 50862 + 11979 = 62841 ≈ 250.68 mm
Maximum permissible gear addendum: h a , max = R A , max − R = 250.68 − 240 = 10.68 mm h_{a,\max} = R_{A,\max} - R = 250.68 - 240 = 10.68\text{ mm} h a , m a x = R A , m a x − R = 250.68 − 240 = 10.68 mm