Study guide

9.1 Simple Mechanisms, Kinematic Inversions & Velocity/Acceleration Diagrams

Coal India Management Trainee CIL MT

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: CIL MT Exam Overview & Coal Sector Landscape

1.1 CIL MT Exam Pattern, Marking Scheme & Strategy 1.2 Coal India Limited: Corporate Structure, Maharatna Status & Subsidiaries 1.3 Indian Coal Mining Sector, Energy Mix & Environmental Regulations

2 Chapter 2: Paper-I General Awareness, Polity & Current Affairs

2.1 Indian Constitution, Governance & Statutory Bodies 2.2 Indian Economy, Union Budget & Economic Planning 2.3 Indian Geography, Mineral Belts & Environmental Ecology 2.4 Modern Indian History, Freedom Struggle & Cultural Heritage 2.5 General Science: Physics, Chemistry & Biology Fundamentals 2.6 Inventions, Discoveries & Scientific-Technological Development 2.7 Uses of Internet, Computer Awareness & Digital Governance 2.8 National & International Organisations 2.9 Awards, Honours & Sports 2.10 Books & Authors, Important Monuments & Places of India 2.11 Ports, Power Plants & Infrastructure of India 2.12 Climate Change, SDGs, National Parks & Wildlife Sanctuaries 2.13 Flagship Government Programmes & Current Affairs Method 2.14 World Physical, Social & Economic Geography

3 Chapter 3: Paper-I Reasoning & Logical Ability

3.1 Series Completion, Coding-Decoding & Semantic Analogies 3.2 Syllogisms, Logical Deduction & Venn Diagrams 3.3 Seating Arrangements, Linear/Circular Alignments & Puzzles 3.4 Direction Sense, Blood Relations & Order/Ranking 3.5 Alphabetical & Alphanumeric Series 3.6 Statement & Conclusions, Statement & Arguments 3.7 Clocks & Calendars 3.8 Cubes, Dice & Figure Counting 3.9 Mirror Images, Water Images, Embedded Figures & Non-Verbal Series 3.10 Decision Making & Data Analysis in Reasoning

4 Chapter 4: Paper-I Numerical Ability & Quantitative Aptitude

4.1 Arithmetic Foundations: Percentages, Profit & Loss, Ratio & Proportion 4.2 Averages, Simple/Compound Interest, Alligations & Mixtures 4.3 Time & Work, Pipes & Cisterns, Time, Speed & Distance 4.4 Algebra, Mensuration, Geometry & Data Interpretation (DI) 4.5 Number System, LCM, HCF & Decimal Fractions 4.6 Surds, Indices & Simplification 4.7 Problems on Ages 4.8 Boats & Streams and Problems on Trains 4.9 Permutations & Combinations 4.10 Probability for Quantitative Aptitude

5 Chapter 5: Paper-I General English & Verbal Ability

5.1 English Grammar, Error Spotting & Sentence Correction 5.2 Vocabulary Building: Synonyms, Antonyms, Idioms & Phrases 5.3 Reading Comprehension, Cloze Tests & Para Jumbles 5.4 Fill in the Blanks, Cloze Passages & Sentence Completion 5.5 Jumbled Sentences & Sentence Improvement

6 Chapter 6: Paper-II Engineering Mathematics

6.1 Matrix Algebra, Rank & Systems of Linear Equations 6.2 Eigenvalues, Eigenvectors & the Cayley-Hamilton Theorem 6.3 Limits, Continuity, Differentiability & Mean Value Theorems 6.4 Maxima-Minima, Indeterminate Forms & Taylor Series 6.5 Definite, Improper, Double & Triple Integrals 6.6 Partial Derivatives, Total Derivative & Multivariable Optimisation 6.7 First-Order Differential Equations: Linear & Non-Linear 6.8 Higher-Order Linear Differential Equations & Engineering Applications 6.9 Laplace Transforms & Transfer-Function Methods 6.10 Probability, Conditional Probability & Bayes' Theorem 6.11 Random Variables, Distributions & Descriptive Statistics 6.12 Numerical Methods: Root Finding, Integration & ODE Solvers

7 Chapter 7: Paper-II Engineering Mechanics & Statics-Dynamics

7.1 Force Systems, Coplanar Equilibrium & Lami's Theorem 7.2 Plane Trusses, Friction Mechanics & Screws/Wedges 7.3 Centroids, Center of Gravity & Moment of Inertia 7.4 Kinematics, Kinetics of Particles & Rigid Body Dynamics 7.5 Virtual Work & Lagrange's Equation 7.6 Rolling Friction, Belt-Pulley Drives, Brakes, Clutches & Vehicle Dynamics

8 Chapter 8: Paper-II Mechanics of Materials & Structural Integrity

8.1 Simple Stresses, Strains, Elastic Moduli & Thermal Stresses 8.2 Principal Stresses, Strain Energy & Mohr's Circle 8.3 Shear Force & Bending Moment Diagrams, Beam Bending & Shear Stresses 8.4 Torsion of Circular Shafts, Springs & Column Buckling 8.5 Thin Cylinders, Spheres & Thick-Walled Pressure Vessels 8.6 Deflection of Beams: Double Integration, Macaulay & Moment-Area 8.7 Shear Centre & Unsymmetrical Bending 8.8 Strain Gauges, Rosettes & Experimental Stress Analysis 8.9 Mechanical Testing: Universal Testing Machine, Hardness & Impact

9 Chapter 9: Paper-II Theory of Machines & Mechanical Vibrations

9.1 Simple Mechanisms, Kinematic Inversions & Velocity/Acceleration Diagrams 9.2 Cams & Followers, Toothed Gearing & Epicyclic Gear Trains 9.3 Flywheels, Centrifugal/Inertia Governors & Rotor Balancing 9.4 Free, Damped & Forced Single-Degree-of-Freedom Vibrations 9.5 Gyroscopic Couple & Gyroscopic Effects

10 Chapter 10: Paper-II Machine Design & Failure Theories

10.1 Static Failure Theories & Variable/Fatigue Loading 10.2 Design of Threaded Fasteners, Welded & Riveted Joints 10.3 Design of Shafts, Keys, Couplings & Rolling/Sliding Bearings 10.4 Design of Spur, Helical, Bevel & Worm Gears 10.5 Design of Helical, Leaf & Torsion Springs 10.6 Design of Brakes & Clutches: Energy, Lining Pressure & Heat

11 Chapter 11: Paper-II Fluid Mechanics & Hydraulic Machinery

11.1 Fluid Properties, Hydrostatic Forces & Buoyancy 11.2 Fluid Kinematics, Continuity & Bernoulli's Equation 11.3 Viscous Flow in Pipes, Boundary Layer & Minor Losses 11.4 Hydraulic Turbines, Centrifugal & Reciprocating Pumps 11.5 Dimensional Analysis, Similitude & Model Testing 11.6 Control-Volume Analysis: Continuity, Momentum & Energy

12 Chapter 12: Paper-II Thermodynamics, Thermal Cycles & Turbomachinery

12.1 Fundamental Concepts, First & Second Laws of Thermodynamics 12.2 Entropy, Availability, Exergy & Properties of Pure Substances 12.3 Air-Standard Gas Power Cycles: Otto, Diesel, Dual & Brayton 12.4 Vapour Power Cycles: Ideal, Reheat & Regenerative Rankine Cycles 12.5 Thermodynamic Relations: Maxwell, Clausius-Clapeyron & Joule-Thomson 12.6 Behaviour of Ideal & Real Gases and Equations of State 12.7 Air & Gas Compressors: Reciprocating, Rotary & Multi-Stage 12.8 Steam & Gas Turbines: Impulse, Reaction & Velocity Diagrams

13 Chapter 13: Paper-II Heat Transfer, Refrigeration & Air Conditioning

13.1 Steady & Unsteady Conduction, Extended Surfaces (Fins) 13.2 Forced/Natural Convection, Radiation & Heat Exchanger LMTD/NTU 13.3 Vapour Compression & Vapour Absorption Refrigeration Systems 13.4 Psychrometric Properties, Processes & Air Conditioning Systems 13.5 Gas Refrigeration, Heat Pump Cycles & Cryogenics

14 Chapter 14: Paper-II Materials Science, Metallurgy & Manufacturing Technology

14.1 Crystal Structures, Phase Diagrams & Iron-Iron Carbide Equilibrium 14.2 Heat Treatment Processes & Engineering Alloy Steels 14.3 Casting Processes, Metal Forming & Welding Metallurgy 14.4 Metal Cutting Mechanics, Tool Life & Machine Tools 14.5 Plastic Deformation, Yield Criteria & Load Estimation in Bulk Forming 14.6 Sheet Metal Forming: Shearing, Bending & Deep Drawing 14.7 Powder Metallurgy 14.8 Brazing, Soldering & Adhesive Bonding 14.9 Non-Traditional Machining: EDM, ECM, USM, AJM, LBM & EBM 14.10 Abrasive Machining, Grinding & Superfinishing 14.11 Principles of Work Holding, Jigs & Fixtures 14.12 Economics of Machining & Tool Life Optimisation

15 Chapter 15: Paper-II Metrology, Quality Control & Industrial Engineering / OR

15.1 Limits, Fits, Tolerances, Gauges & Surface Metrology 15.2 Production Planning, Forecasting & Inventory Control Models 15.3 Operations Research: Linear Programming & Transportation/Assignment 15.4 Project Management: CPM, PERT, Network Analysis & Crashing 15.5 Comparators & Interferometry 15.6 Coordinate Measuring Machines & Machine Tool Alignment Testing 15.7 Computer Integrated Manufacturing: CAD/CAM & Integration Tools 15.8 NC/CNC Machines & CNC Part Programming 15.9 Material Requirements Planning, Scheduling & Sequencing 15.10 Queuing Theory & Simple Queuing Models 15.11 Network Flow Models: Shortest Route, Maximal Flow & Spanning Tree

9.1 Simple Mechanisms, Kinematic Inversions & Velocity/Acceleration Diagrams

Key Takeaways Explain This Topic AI

Planar mechanism mobility is governed by Kutzbach's criterion: F = 3 ( n − 1 ) − 2 j − h F = 3(n - 1) - 2j - h F = 3 ( n − 1 ) − 2 j − h , requiring F = 1 F = 1 F = 1 for a fully constrained single-degree-of-freedom mechanism.

Grashof's theorem ( s + l ≤ p + q s + l \le p + q s + l ≤ p + q ) determines whether a four-bar linkage produces a crank-rocker, double-crank (drag-link), or double-rocker depending on which link is fixed.

Kinematic inversions of single and double slider-crank chains yield essential industrial mechanisms including Whitworth and slotted-lever quick-return mechanisms, elliptical trammels, and Oldham couplings.

Aronhold-Kennedy's theorem establishes that the three instantaneous centres of three bodies in planar relative motion must lie along a single straight line.

Coriolis acceleration ( a c = 2 ω v a_c = 2\omega v a c ​ = 2 ω v ) occurs whenever a slider moves along a rotating link, directed perpendicular to the link by rotating the sliding velocity vector v ⃗ \vec{v} v by 90 ∘ 90^{\circ} 9 0 ∘ in the sense of ω ⃗ \vec{\omega} ω .

Last updated: August 2026

Simple Mechanisms, Kinematic Inversions & Velocity/Acceleration Diagrams

Quick Reference: A kinematic link is a resistant body possessing relative motion. Planar mechanism mobility is given by Kutzbach's criterion F = 3 ( n − 1 ) − 2 j − h F = 3(n - 1) - 2j - h F = 3 ( n − 1 ) − 2 j − h . Continuous rotation in a four-bar chain requires Grashof's condition s + l ≤ p + q s + l \le p + q s + l ≤ p + q . The Coriolis acceleration component a c = 2 ω v a_c = 2\omega v a c ​ = 2 ω v arises when a slider moves along a rotating link and acts perpendicular to the link.

In Coal India Limited (CIL) open-cast and underground mechanized mining operations, mechanisms form the core of heavy machinery—from dragline bucket linkages, shovel crowd motions, and continuous miners to conveyor tensioning drives and reciprocating screening decks. A rigorous understanding of kinematics is essential for mechanical engineers to design, troubleshoot, and evaluate dynamic loads in these heavy-duty systems.

  • 1. Kinematic Links and Pairs
  • Kinematic Links (Elements)

A kinematic link is defined as a resistant body (or an assembly of resistant bodies) that provides constrained relative motion to other parts of a machine while transmitting forces. A body is classified as "resistant" if it does not undergo permanent deformation that impairs its functional operation under operating loads.

Rigid Link: Experiences negligible deformation (e.g., connecting rods, engine cranks, machine tool frames).

Flexible Link: Transmits tensile forces while deforming elastically in bending (e.g., belts, ropes, chains).

Fluid Link: Transmits power through fluid hydrostatic or hydrodynamic pressure (e.g., hydraulic jacks, fluid couplings, hydraulic cylinders in mining excavators).

Classification of Kinematic Pairs

A kinematic pair consists of two interconnected links maintaining continuous physical contact with specified relative motion.

  • Classification Criteria Pair Types Key Characteristics Degrees of Freedom (Planar)
  • Type of Relative Motion Sliding / Prismatic ( P P P ) Pure linear translation along an axis 1 1 1 DOF
  • Turning / Revolute ( R R R ) Pure circular rotation about an axis 1 1 1 DOF
  • Rolling ( R R R ) Combined rolling and sliding without slip 1 1 1 DOF (pure roll)
  • Screw / Helical ( H H H ) Coordinated translation and rotation via threads 1 1 1 DOF
  • Spherical / Ball ( S S S ) Three-dimensional angular rotation 3 3 3 DOF (spatial)
  • Nature of Contact Lower Pair Surface or area contact between mating elements 1 1 1 DOF (typically)
  • Higher Pair Point or line contact (cams, gears, roller bearings) 2 2 2 DOF (in plane)
  • Type of Closure Self-Closed (Closed) Geometrically or mechanically locked together —
  • Force-Closed (Open) Held in contact by external gravity or spring forces —
  • 2. Mobility and Degree of Freedom (DOF)
  • Kinematic Chains and Mechanisms

When kinematic pairs are assembled, they form a kinematic chain .

Locked Chain (Structure / Frame): F ≤ 0 F \le 0 F ≤ 0 (No relative motion possible).

Constrained Mechanism: F = 1 F = 1 F = 1 (A single input produces unique, predictable output motions).

Unconstrained Mechanism: F > 1 F > 1 F > 1 (Requires multiple independent inputs to define the configuration). +-------------------------------------------------------------------------+

  • | KINEMATIC MOBILITY SPECTRUM |
  • | |
  • | F < 0 F = 0 F = 1 F > 1 |
  • | Superstructure Determinate Constrained Unconstrained|
  • | (Pre-stressed) Structure Mechanism Mechanism |
  • | (Over-locked) (Zero Mobility) (1 Input -> 1 Out) (Multi-Input)|
  • +-------------------------------------------------------------------------+
  • Kutzbach Criterion for Planar Mechanisms

For any mechanism operating in a two-dimensional plane: F = 3 ( n − 1 ) − 2 j − h F = 3(n - 1) - 2j - h F = 3 ( n − 1 ) − 2 j − h

Where:

n = Total number of links (including the fixed frame) n = \text{Total number of links (including the fixed frame)} n = Total number of links (including the fixed frame)

j = Number of binary joints (lower pairs with 1 DOF, such as turning and sliding pairs) j = \text{Number of binary joints (lower pairs with } 1 \text{ DOF, such as turning and sliding pairs)} j = Number of binary joints (lower pairs with 1 DOF, such as turning and sliding pairs)

h = Number of higher pairs with 2 DOF (such as cam-roller or gear tooth contacts) h = \text{Number of higher pairs with } 2 \text{ DOF (such as cam-roller or gear tooth contacts)} h = Number of higher pairs with 2 DOF (such as cam-roller or gear tooth contacts)

Special Joint Handling:

A ternary joint (connecting 3 links at a single pivot) is equivalent to 2 2 2 binary joints ( j = 2 j = 2 j = 2 ).

A quaternary joint (connecting 4 links) is equivalent to 3 3 3 binary joints ( j = 3 j = 3 j = 3 ).

Generally, an m m m -order joint connecting m m m links equals ( m − 1 ) (m - 1) ( m − 1 ) binary joints.

Grubler's Criterion for Plane Mechanisms

Grubler's criterion is a specialized formulation of Kutzbach's equation applied to mechanisms having only lower pairs ( h = 0 h = 0 h = 0 ) and requiring a single degree of freedom ( F = 1 F = 1 F = 1 ): 3 ( n − 1 ) − 2 j = 1 ⟹ 3 n − 2 j − 4 = 0 3(n - 1) - 2j = 1 \implies 3n - 2j - 4 = 0 3 ( n − 1 ) − 2 j = 1 ⟹ 3 n − 2 j − 4 = 0

For Grubler's criterion to yield a physically valid mechanism with lower pairs:

The minimum number of links required is n = 4 n = 4 n = 4 .

The number of links n n n must always be an even number ( n = 4 , 6 , 8 , … n = 4, 6, 8, \dots n = 4 , 6 , 8 , … ). An odd number of links with all lower pairs cannot form a single-degree-of-freedom planar mechanism.

Redundant Degrees of Freedom and Redundant Links

Redundant Degree of Freedom ( F r F_r F r ​ ): Motion that does not affect the input-output kinematic relationship of the mechanism (e.g., rotation of a roller follower about its own pin in a cam system). The corrected formula is: F = 3 ( n − 1 ) − 2 j − h − F r F = 3(n - 1) - 2j - h - F_r F = 3 ( n − 1 ) − 2 j − h − F r ​

Redundant Link ( n r n_r n r ​ ): A link that introduces no additional kinematic constraints (e.g., a parallel tie rod in a five-bar double-crank mechanism). Redundant links must be subtracted prior to applying mobility criteria.

3. Grashof's Law for Four-Bar Chains

Consider a planar four-bar kinematic chain comprising four revolute pairs with link lengths:

  • s = Length of shortest link s = \text{Length of shortest link} s = Length of shortest link
  • l = Length of longest link l = \text{Length of longest link} l = Length of longest link

p , q = Lengths of the two intermediate links p, q = \text{Lengths of the two intermediate links} p , q = Lengths of the two intermediate links Coupler Link (p)

  • B o-----------------------o C
  • / \
  • Input / \ Output
  • Crank / \ Rocker
  • (s) / \ (q)
  • / \
  • o-----------------------------------o
  • A Fixed Link (l) D
  • Grashof's Condition: s + l ≤ p + q s + l \le p + q s + l ≤ p + q

Class-I Mechanisms ( s + l < p + q s + l < p + q s + l < p + q ): At least one link can make a complete 360 ∘ 360^{\circ} 36 0 ∘ revolution relative to the other three links.

Crank-Rocker Mechanism: Link adjacent to the shortest link is fixed. The shortest link acts as a continuously rotating input crank, while the opposite link oscillates as a rocker.

Double-Crank (Drag-Link) Mechanism: The shortest link ( s s s ) itself is fixed. Both adjacent links make complete 360 ∘ 360^{\circ} 36 0 ∘ rotations at varying relative angular velocities.

Double-Rocker Mechanism: Link opposite to the shortest link is fixed. The shortest link acts as the coupler (floating link), and both grounded links oscillate as rockers.

Class-II Mechanisms ( s + l > p + q s + l > p + q s + l > p + q ): No link can rotate through a complete 360 ∘ 360^{\circ} 36 0 ∘ cycle. All inversions yield Double-Rocker (Rocker-Rocker) mechanisms.

Change-Point Mechanisms ( s + l = p + q s + l = p + q s + l = p + q ): Links become collinear during motion (e.g., parallelogram linkages, deltoid/kite mechanisms). The output can either maintain parallel motion or toggle into an anti-parallel configuration unless guided by momentum or an auxiliary link.

4. Kinematic Inversions of Fundamental Chains

A kinematic inversion is obtained by fixing a different link in a given kinematic chain as the stationary reference frame. While the relative motions between adjacent links remain identical, the absolute motions of the links relative to the ground change completely. +-------------------------------------------------------------------------+

  • | KINEMATIC INVERSIONS CLASSIFICATION |
  • +-------------------------------------------------------------------------+
  • |
  • +-------------------------------+-------------------------------+
  • | | |
  • Four-Bar Chain Single Slider-Crank Double Slider-Crank
  • Beam Engine - Reciprocating Engine (Link 1) - Elliptical Trammel (Link 1)
  • Locomotive Coupler - Whitworth / Rotary (Link 2) - Scotch Yoke (Link 2)
  • Watt Indicator Mechanism - Slotted-Lever / Oscillating - Oldham Coupling (Link 3)
  • Ackermann Steering Cylinder (Link 3)
  • Hand / Pendulum Pump (Link 4)
  • Inversions of Single Slider-Crank Chain

A single slider-crank chain has 3 turning pairs and 1 sliding pair.

Inversion Fixed Link Resulting Mechanism Industrial Application

1st Inversion Link 1 (Cylinder / Frame) Reciprocating IC Engine, Reciprocating Air Compressor Piston power generation, heavy mine compressors

2nd Inversion Link 2 (Crank) Whitworth Quick-Return Mechanism, Gnome Rotary Engine Shaper machines, early rotary radial aircraft engines

3rd Inversion Link 3 (Connecting Rod) Crank and Slotted-Lever Quick-Return, Oscillating Cylinder Engine Workshop slotters, compact marine steam winches

4th Inversion Link 4 (Slider / Piston) Hand Pump (Pendulum Pump / Bull Engine) Deep borehole manual water extraction, drainage pumps

Quick-Return Ratio ( Q R R QRR QRR )

In quick-return mechanisms (Whitworth and Slotted-Lever), the cutting stroke occurs during a larger crank rotation angle α \alpha α , while the idle return stroke occurs during a smaller angle β = 360 ∘ − α \beta = 360^{\circ} - \alpha β = 36 0 ∘ − α : Q R R = Time of Cutting Stroke Time of Return Stroke = α β = 360 ∘ − β β > 1 QRR = \frac{\text{Time of Cutting Stroke}}{\text{Time of Return Stroke}} = \frac{\alpha}{\beta} = \frac{360^{\circ} - \beta}{\beta} > 1 QRR = Time of Return Stroke Time of Cutting Stroke ​ = β α ​ = β 36 0 ∘ − β ​ > 1

For a crank of radius r r r and fixed link distance d d d (where d > r d > r d > r for slotted lever): cos ⁡ ( β 2 ) = r d \cos\left(\frac{\beta}{2}\right) = \frac{r}{d} cos ( 2 β ​ ) = d r ​

Inversions of Double Slider-Crank Chain

A double slider-crank chain has 2 turning pairs and 2 sliding pairs.

First Inversion (Slotted Frame Fixed): Elliptical Trammel .

Any point P P P on the link connecting the two sliders traces an exact ellipse: x 2 ( a + b ) 2 + y 2 b 2 = 1 \frac{x^2}{(a + b)^2} + \frac{y^2}{b^2} = 1 ( a + b ) 2 x 2 ​ + b 2 y 2 ​ = 1

The midpoint of the connecting link traces a true circle of radius r = a = b r = a = b r = a = b .

Second Inversion (One Slider Fixed): Scotch Yoke Mechanism .

Converts continuous rotary motion into pure Simple Harmonic Motion (SHM) of the reciprocating slotted yoke without angularity errors.

Third Inversion (Slotted Link / Cross-Piece Fixed): Oldham's Coupling .

Connects two parallel shafts whose axes are offset by a lateral distance d d d .

Velocity ratio is always strictly 1 : 1 1:1 1 : 1 (constant velocity transmission).

Maximum sliding velocity of the central tongue in the slot is v s = d ⋅ ω v_s = d \cdot \omega v s ​ = d ⋅ ω .

  • 5. Velocity Analysis & Kennedy's Theorem
  • Instantaneous Centre of Rotation (I-Centre)

The instantaneous centre of relative rotation ( I I I ) is a point common to two bodies in planar motion that has the exact same instantaneous linear velocity in both bodies.

The total number of instantaneous centres N N N in a mechanism containing n n n links is: N = n ( n − 1 ) 2 N = \frac{n(n - 1)}{2} N = 2 n ( n − 1 ) ​

Aronhold-Kennedy Theorem of Three Centres

Theorem: If three planar bodies ( 1 , 2 , 3 1, 2, 3 1 , 2 , 3 ) undergo relative motion with respect to one another, their three relative instantaneous centres of rotation— I 12 , I 23 , I_{12}, I_{23}, I 12 ​ , I 23 ​ , and I 13 I_{13} I 13 ​ —must lie on a single straight line. Body 2

  • o----------o
  • / I_23 \
  • / \
  • I_12 o o I_13
  • / \
  • o--------------------o
  • Body 1 Body 3

Kennedy's Collinear Line: [ I_12 ] ===== [ I_23 ] ===== [ I_13 ]

Using Kennedy's theorem, the linear velocity of any common point P P P (such as I 23 I_{23} I 23 ​ ) is given by: v P = ω 2 ⋅ ( I 12 I 23 ) = ω 3 ⋅ ( I 13 I 23 ) v_P = \omega_2 \cdot (I_{12} I_{23}) = \omega_3 \cdot (I_{13} I_{23}) v P ​ = ω 2 ​ ⋅ ( I 12 ​ I 23 ​ ) = ω 3 ​ ⋅ ( I 13 ​ I 23 ​ )

  • 6. Acceleration Analysis & Coriolis Acceleration
  • Acceleration Components of a Rigid Link

When a point B B B rotates about a fixed point A A A with angular velocity ω \omega ω and angular acceleration α \alpha α :

Centripetal (Radial) Acceleration ( a r a_r a r ​ ): Acts along the link directed toward the center of rotation: a r = ω 2 r = v 2 r a_r = \omega^2 r = \frac{v^2}{r} a r ​ = ω 2 r = r v 2 ​

Tangential Acceleration ( a t a_t a t ​ ): Acts perpendicular to the link in the sense of α \alpha α : a t = α ⋅ r a_t = \alpha \cdot r a t ​ = α ⋅ r

  • Total Acceleration ( a a a ): a = a r 2 + a t 2 a = \sqrt{a_r^2 + a_t^2} a = a r 2 ​ + a t 2 ​ ​
  • Coriolis Component of Acceleration ( a c a_c a c ​ )

When a slider moves along a guide path that is simultaneously rotating in a plane, the slider experiences an additional acceleration component called the Coriolis acceleration . a c = 2 ω v a_c = 2\omega v a c ​ = 2 ω v

Where:

ω = Angular velocity of the rotating guide link (rad/s) \omega = \text{Angular velocity of the rotating guide link (rad/s)} ω = Angular velocity of the rotating guide link (rad/s)

v = Linear velocity of the slider relative to the rotating guide (m/s) v = \text{Linear velocity of the slider relative to the rotating guide (m/s)} v = Linear velocity of the slider relative to the rotating guide (m/s) ^ v (Sliding outward)

|

| Direction of Coriolis Acceleration (a_c):

  • Rotating | Rotate sliding vector v by 90 deg
  • Guide (w) | in the direction of w (Counter-Clockwise)
  • \ |
  • \ | <=========== a_c (Acts to the left)
  • \ [Slider]
  • \ |
  • \ |
  • \ |
  • \ |
  • o O (Pivot)

Rule for Direction of Coriolis Acceleration: Take the vector representing the relative sliding velocity v ⃗ \vec{v} v of the slider along the link, and rotate it by 90 ∘ 90^{\circ} 9 0 ∘ in the direction of the angular velocity ω ⃗ \vec{\omega} ω of the guide link. The resulting vector direction gives the exact sense of the Coriolis acceleration.

Loading diagram... Kinematic Inversions and Mechanisms Architecture

  • 7. Worked Numerical Examples
  • Example 1: Quick-Return Mechanism Kinematics

Problem: In a crank and slotted-lever quick-return motion mechanism used in a workshop shaper, the distance between the fixed centers is d = 450 mm d = 450\text{ mm} d = 450 mm and the driving crank length is r = 225 mm r = 225\text{ mm} r = 225 mm . The length of the slotted lever is L = 900 mm L = 900\text{ mm} L = 900 mm , and the line of stroke passes through the extreme upper position of the slotted lever pivot. Calculate:

The ratio of time of cutting stroke to time of return stroke ( Q R R QRR QRR ).

The total length of the cutting stroke.

Solution:

Determine Return Angle β \beta β : At the extreme limiting positions of the slotted lever, the crank is tangent to the lever: cos ⁡ ( β 2 ) = r d = 225 450 = 0.5 \cos\left(\frac{\beta}{2}\right) = \frac{r}{d} = \frac{225}{450} = 0.5 cos ( 2 β ​ ) = d r ​ = 450 225 ​ = 0.5 β 2 = cos ⁡ − 1 ( 0.5 ) = 60 ∘ ⟹ β = 120 ∘ \frac{\beta}{2} = \cos^{-1}(0.5) = 60^{\circ} \implies \beta = 120^{\circ} 2 β ​ = cos − 1 ( 0.5 ) = 6 0 ∘ ⟹ β = 12 0 ∘

Calculate Cutting Angle α \alpha α and Q R R QRR QRR : α = 360 ∘ − β = 360 ∘ − 120 ∘ = 240 ∘ \alpha = 360^{\circ} - \beta = 360^{\circ} - 120^{\circ} = 240^{\circ} α = 36 0 ∘ − β = 36 0 ∘ − 12 0 ∘ = 24 0 ∘ Q R R = Time of Cutting Time of Return = α β = 240 ∘ 120 ∘ = 2.0 QRR = \frac{\text{Time of Cutting}}{\text{Time of Return}} = \frac{\alpha}{\beta} = \frac{240^{\circ}}{120^{\circ}} = 2.0 QRR = Time of Return Time of Cutting ​ = β α ​ = 12 0 ∘ 24 0 ∘ ​ = 2.0

Calculate Stroke Length ( S S S ): S = 2 × L × sin ⁡ ( β 2 ) × ( r d ) = 2 × L × r d = 2 × 900 × 225 450 = 900 mm S = 2 \times L \times \sin\left(\frac{\beta}{2}\right) \times \left(\frac{r}{d}\right) = 2 \times L \times \frac{r}{d} = 2 \times 900 \times \frac{225}{450} = 900\text{ mm} S = 2 × L × sin ( 2 β ​ ) × ( d r ​ ) = 2 × L × d r ​ = 2 × 900 × 450 225 ​ = 900 mm

Example 2: Coriolis Acceleration on a Rotating Arm

Problem: A radial excavator discharge chute link O A OA O A rotates in a vertical plane at a constant speed of ω = 12 rad/s \omega = 12\text{ rad/s} ω = 12 rad/s counter-clockwise. A coal feed block slides along the chute radially outward away from pivot O O O with a relative sliding velocity of v = 4 m/s v = 4\text{ m/s} v = 4 m/s and an outward sliding acceleration of a s = 6 m/s 2 a_s = 6\text{ m/s}^2 a s ​ = 6 m/s 2 . When the block is at a radius of r = 1.5 m r = 1.5\text{ m} r = 1.5 m from O O O , determine:

The Coriolis component of acceleration.

The total resultant acceleration of the block.

Solution:

Coriolis Acceleration: a c = 2 ω v = 2 × ( 12 rad/s ) × ( 4 m/s ) = 96 m/s 2 a_c = 2\omega v = 2 \times (12\text{ rad/s}) \times (4\text{ m/s}) = 96\text{ m/s}^2 a c ​ = 2 ω v = 2 × ( 12 rad/s ) × ( 4 m/s ) = 96 m/s 2

Direction: Rotate the outward velocity vector by 90 ∘ 90^{\circ} 9 0 ∘ counter-clockwise (in direction of ω \omega ω ) ⟹ \implies ⟹ acts perpendicular to the chute to the left.

Centripetal (Radial) Acceleration: a r = ω 2 r = ( 12 ) 2 × 1.5 = 144 × 1.5 = 216 m/s 2 ( directed toward O ) a_r = \omega^2 r = (12)^2 \times 1.5 = 144 \times 1.5 = 216\text{ m/s}^2 \quad (\text{directed toward } O) a r ​ = ω 2 r = ( 12 ) 2 × 1.5 = 144 × 1.5 = 216 m/s 2 ( directed toward O )

Tangential Acceleration: Since ω = constant \omega = \text{constant} ω = constant , α = 0 ⟹ a t = α r = 0 \alpha = 0 \implies a_t = \alpha r = 0 α = 0 ⟹ a t ​ = α r = 0 .

Total Radial Acceleration Component ( a rad a_{\text{rad}} a rad ​ ): a rad = a s − a r = 6 − 216 = − 210 m/s 2 ( directed toward O ) a_{\text{rad}} = a_s - a_r = 6 - 216 = -210\text{ m/s}^2 \quad (\text{directed toward } O) a rad ​ = a s ​ − a r ​ = 6 − 216 = − 210 m/s 2 ( directed toward O )

Total Tangential Acceleration Component ( a tan a_{\text{tan}} a tan ​ ): a tan = a c + a t = 96 + 0 = 96 m/s 2 ( perpendicular to chute ) a_{\text{tan}} = a_c + a_t = 96 + 0 = 96\text{ m/s}^2 \quad (\text{perpendicular to chute}) a tan ​ = a c ​ + a t ​ = 96 + 0 = 96 m/s 2 ( perpendicular to chute )

Resultant Acceleration ( a total a_{\text{total}} a total ​ ): a total = a rad 2 + a tan 2 = ( − 210 ) 2 + ( 96 ) 2 = 44100 + 9216 = 53316 ≈ 230.9 m/s 2 a_{\text{total}} = \sqrt{a_{\text{rad}}^2 + a_{\text{tan}}^2} = \sqrt{(-210)^2 + (96)^2} = \sqrt{44100 + 9216} = \sqrt{53316} \approx 230.9\text{ m/s}^2 a total ​ = a rad 2 ​ + a tan 2 ​ ​ = ( − 210 ) 2 + ( 96 ) 2 ​ = 44100 + 9216 ​ = 53316 ​ ≈ 230.9 m/s 2