Study guide
9.4 Free, Damped & Forced Single-Degree-of-Freedom Vibrations
Coal India Management Trainee CIL MT
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: CIL MT Exam Overview & Coal Sector Landscape
1.1 CIL MT Exam Pattern, Marking Scheme & Strategy 1.2 Coal India Limited: Corporate Structure, Maharatna Status & Subsidiaries 1.3 Indian Coal Mining Sector, Energy Mix & Environmental Regulations
2 Chapter 2: Paper-I General Awareness, Polity & Current Affairs
2.1 Indian Constitution, Governance & Statutory Bodies 2.2 Indian Economy, Union Budget & Economic Planning 2.3 Indian Geography, Mineral Belts & Environmental Ecology 2.4 Modern Indian History, Freedom Struggle & Cultural Heritage 2.5 General Science: Physics, Chemistry & Biology Fundamentals 2.6 Inventions, Discoveries & Scientific-Technological Development 2.7 Uses of Internet, Computer Awareness & Digital Governance 2.8 National & International Organisations 2.9 Awards, Honours & Sports 2.10 Books & Authors, Important Monuments & Places of India 2.11 Ports, Power Plants & Infrastructure of India 2.12 Climate Change, SDGs, National Parks & Wildlife Sanctuaries 2.13 Flagship Government Programmes & Current Affairs Method 2.14 World Physical, Social & Economic Geography
3 Chapter 3: Paper-I Reasoning & Logical Ability
3.1 Series Completion, Coding-Decoding & Semantic Analogies 3.2 Syllogisms, Logical Deduction & Venn Diagrams 3.3 Seating Arrangements, Linear/Circular Alignments & Puzzles 3.4 Direction Sense, Blood Relations & Order/Ranking 3.5 Alphabetical & Alphanumeric Series 3.6 Statement & Conclusions, Statement & Arguments 3.7 Clocks & Calendars 3.8 Cubes, Dice & Figure Counting 3.9 Mirror Images, Water Images, Embedded Figures & Non-Verbal Series 3.10 Decision Making & Data Analysis in Reasoning
4 Chapter 4: Paper-I Numerical Ability & Quantitative Aptitude
4.1 Arithmetic Foundations: Percentages, Profit & Loss, Ratio & Proportion 4.2 Averages, Simple/Compound Interest, Alligations & Mixtures 4.3 Time & Work, Pipes & Cisterns, Time, Speed & Distance 4.4 Algebra, Mensuration, Geometry & Data Interpretation (DI) 4.5 Number System, LCM, HCF & Decimal Fractions 4.6 Surds, Indices & Simplification 4.7 Problems on Ages 4.8 Boats & Streams and Problems on Trains 4.9 Permutations & Combinations 4.10 Probability for Quantitative Aptitude
5 Chapter 5: Paper-I General English & Verbal Ability
5.1 English Grammar, Error Spotting & Sentence Correction 5.2 Vocabulary Building: Synonyms, Antonyms, Idioms & Phrases 5.3 Reading Comprehension, Cloze Tests & Para Jumbles 5.4 Fill in the Blanks, Cloze Passages & Sentence Completion 5.5 Jumbled Sentences & Sentence Improvement
6 Chapter 6: Paper-II Engineering Mathematics
6.1 Matrix Algebra, Rank & Systems of Linear Equations 6.2 Eigenvalues, Eigenvectors & the Cayley-Hamilton Theorem 6.3 Limits, Continuity, Differentiability & Mean Value Theorems 6.4 Maxima-Minima, Indeterminate Forms & Taylor Series 6.5 Definite, Improper, Double & Triple Integrals 6.6 Partial Derivatives, Total Derivative & Multivariable Optimisation 6.7 First-Order Differential Equations: Linear & Non-Linear 6.8 Higher-Order Linear Differential Equations & Engineering Applications 6.9 Laplace Transforms & Transfer-Function Methods 6.10 Probability, Conditional Probability & Bayes' Theorem 6.11 Random Variables, Distributions & Descriptive Statistics 6.12 Numerical Methods: Root Finding, Integration & ODE Solvers
7 Chapter 7: Paper-II Engineering Mechanics & Statics-Dynamics
7.1 Force Systems, Coplanar Equilibrium & Lami's Theorem 7.2 Plane Trusses, Friction Mechanics & Screws/Wedges 7.3 Centroids, Center of Gravity & Moment of Inertia 7.4 Kinematics, Kinetics of Particles & Rigid Body Dynamics 7.5 Virtual Work & Lagrange's Equation 7.6 Rolling Friction, Belt-Pulley Drives, Brakes, Clutches & Vehicle Dynamics
8 Chapter 8: Paper-II Mechanics of Materials & Structural Integrity
8.1 Simple Stresses, Strains, Elastic Moduli & Thermal Stresses 8.2 Principal Stresses, Strain Energy & Mohr's Circle 8.3 Shear Force & Bending Moment Diagrams, Beam Bending & Shear Stresses 8.4 Torsion of Circular Shafts, Springs & Column Buckling 8.5 Thin Cylinders, Spheres & Thick-Walled Pressure Vessels 8.6 Deflection of Beams: Double Integration, Macaulay & Moment-Area 8.7 Shear Centre & Unsymmetrical Bending 8.8 Strain Gauges, Rosettes & Experimental Stress Analysis 8.9 Mechanical Testing: Universal Testing Machine, Hardness & Impact
9 Chapter 9: Paper-II Theory of Machines & Mechanical Vibrations
9.1 Simple Mechanisms, Kinematic Inversions & Velocity/Acceleration Diagrams 9.2 Cams & Followers, Toothed Gearing & Epicyclic Gear Trains 9.3 Flywheels, Centrifugal/Inertia Governors & Rotor Balancing 9.4 Free, Damped & Forced Single-Degree-of-Freedom Vibrations 9.5 Gyroscopic Couple & Gyroscopic Effects
10 Chapter 10: Paper-II Machine Design & Failure Theories
10.1 Static Failure Theories & Variable/Fatigue Loading 10.2 Design of Threaded Fasteners, Welded & Riveted Joints 10.3 Design of Shafts, Keys, Couplings & Rolling/Sliding Bearings 10.4 Design of Spur, Helical, Bevel & Worm Gears 10.5 Design of Helical, Leaf & Torsion Springs 10.6 Design of Brakes & Clutches: Energy, Lining Pressure & Heat
11 Chapter 11: Paper-II Fluid Mechanics & Hydraulic Machinery
11.1 Fluid Properties, Hydrostatic Forces & Buoyancy 11.2 Fluid Kinematics, Continuity & Bernoulli's Equation 11.3 Viscous Flow in Pipes, Boundary Layer & Minor Losses 11.4 Hydraulic Turbines, Centrifugal & Reciprocating Pumps 11.5 Dimensional Analysis, Similitude & Model Testing 11.6 Control-Volume Analysis: Continuity, Momentum & Energy
12 Chapter 12: Paper-II Thermodynamics, Thermal Cycles & Turbomachinery
12.1 Fundamental Concepts, First & Second Laws of Thermodynamics 12.2 Entropy, Availability, Exergy & Properties of Pure Substances 12.3 Air-Standard Gas Power Cycles: Otto, Diesel, Dual & Brayton 12.4 Vapour Power Cycles: Ideal, Reheat & Regenerative Rankine Cycles 12.5 Thermodynamic Relations: Maxwell, Clausius-Clapeyron & Joule-Thomson 12.6 Behaviour of Ideal & Real Gases and Equations of State 12.7 Air & Gas Compressors: Reciprocating, Rotary & Multi-Stage 12.8 Steam & Gas Turbines: Impulse, Reaction & Velocity Diagrams
13 Chapter 13: Paper-II Heat Transfer, Refrigeration & Air Conditioning
13.1 Steady & Unsteady Conduction, Extended Surfaces (Fins) 13.2 Forced/Natural Convection, Radiation & Heat Exchanger LMTD/NTU 13.3 Vapour Compression & Vapour Absorption Refrigeration Systems 13.4 Psychrometric Properties, Processes & Air Conditioning Systems 13.5 Gas Refrigeration, Heat Pump Cycles & Cryogenics
14 Chapter 14: Paper-II Materials Science, Metallurgy & Manufacturing Technology
14.1 Crystal Structures, Phase Diagrams & Iron-Iron Carbide Equilibrium 14.2 Heat Treatment Processes & Engineering Alloy Steels 14.3 Casting Processes, Metal Forming & Welding Metallurgy 14.4 Metal Cutting Mechanics, Tool Life & Machine Tools 14.5 Plastic Deformation, Yield Criteria & Load Estimation in Bulk Forming 14.6 Sheet Metal Forming: Shearing, Bending & Deep Drawing 14.7 Powder Metallurgy 14.8 Brazing, Soldering & Adhesive Bonding 14.9 Non-Traditional Machining: EDM, ECM, USM, AJM, LBM & EBM 14.10 Abrasive Machining, Grinding & Superfinishing 14.11 Principles of Work Holding, Jigs & Fixtures 14.12 Economics of Machining & Tool Life Optimisation
15 Chapter 15: Paper-II Metrology, Quality Control & Industrial Engineering / OR
15.1 Limits, Fits, Tolerances, Gauges & Surface Metrology 15.2 Production Planning, Forecasting & Inventory Control Models 15.3 Operations Research: Linear Programming & Transportation/Assignment 15.4 Project Management: CPM, PERT, Network Analysis & Crashing 15.5 Comparators & Interferometry 15.6 Coordinate Measuring Machines & Machine Tool Alignment Testing 15.7 Computer Integrated Manufacturing: CAD/CAM & Integration Tools 15.8 NC/CNC Machines & CNC Part Programming 15.9 Material Requirements Planning, Scheduling & Sequencing 15.10 Queuing Theory & Simple Queuing Models 15.11 Network Flow Models: Shortest Route, Maximal Flow & Spanning Tree
9.4 Free, Damped & Forced Single-Degree-of-Freedom Vibrations
Key Takeaways Explain This Topic AI
The undamped natural frequency of an SDOF system is ω n = k / m = g / Δ st \omega_n = \sqrt{k/m} = \sqrt{g/\Delta_{\text{st}}} ω n = k / m = g / Δ st , with equivalent stiffness combinations behaving as k eq = k 1 + k 2 k_{\text{eq}} = k_1 + k_2 k eq = k 1 + k 2 (parallel) and 1 / k eq = 1 / k 1 + 1 / k 2 1/k_{\text{eq}} = 1/k_1 + 1/k_2 1/ k eq = 1/ k 1 + 1/ k 2 (series).
Viscous damping behavior is governed by the damping ratio ζ = c / c c = c / ( 2 k m ) \zeta = c/c_c = c/(2\sqrt{km}) ζ = c / c c = c / ( 2 km ) , producing oscillatory decay when ζ < 1 \zeta < 1 ζ < 1 with damped frequency ω d = ω n 1 − ζ 2 \omega_d = \omega_n \sqrt{1 - \zeta^2} ω d = ω n 1 − ζ 2 .
Logarithmic decrement δ = ln ( x 1 / x 2 ) = 2 π ζ / 1 − ζ 2 \delta = \ln(x_1/x_2) = 2\pi\zeta / \sqrt{1 - \zeta^2} δ = ln ( x 1 / x 2 ) = 2 π ζ / 1 − ζ 2 quantifies the rate of amplitude decay in underdamped systems.
In harmonically forced vibrations, resonance occurs at frequency ratio r = ω / ω n = 1 r = \omega/\omega_n = 1 r = ω / ω n = 1 , where the magnification factor is capped solely by damping at MF = 1 / ( 2 ζ ) \text{MF} = 1/(2\zeta) MF = 1/ ( 2 ζ ) .
Effective vibration isolation ( TR < 1 \text{TR} < 1 TR < 1 ) requires operating in the supercritical frequency region r > 2 r > \sqrt{2} r > 2 , where lower damping yields superior force attenuation.
Last updated: August 2026
Free, Damped & Forced Single-Degree-of-Freedom Vibrations
Quick Reference: Natural circular frequency is ω n = k / m \omega_n = \sqrt{k/m} ω n = k / m . Damping ratio ζ = c / ( 2 k m ) \zeta = c / (2\sqrt{km}) ζ = c / ( 2 km ) . Damped frequency ω d = ω n 1 − ζ 2 \omega_d = \omega_n \sqrt{1 - \zeta^2} ω d = ω n 1 − ζ 2 . Logarithmic decrement δ = 2 π ζ / 1 − ζ 2 ≈ 2 π ζ \delta = 2\pi\zeta / \sqrt{1 - \zeta^2} \approx 2\pi\zeta δ = 2 π ζ / 1 − ζ 2 ≈ 2 π ζ . Transmissibility TR < 1 \text{TR} < 1 TR < 1 (effective isolation) occurs strictly when frequency ratio r = ω / ω n > 2 r = \omega / \omega_n > \sqrt{2} r = ω / ω n > 2 .
Mechanical vibrations are ubiquitous in Coal India mining operations: vibrating sizing screens, coal crushing ball mills, heavy mine drainage slurry pumps, and longwall shearer drives. Controlling structural vibrations and designing isolation mounts prevents structural fatigue, foundation failure, and noise pollution.
- 1. Undamped Free SDOF Vibrations
- Equation of Motion & Natural Frequency
For a lumped mass m m m attached to a linear spring of stiffness k k k , applying Newton's second law or energy conservation yields: m x ¨ + k x = 0 ⟹ x ¨ + ω n 2 x = 0 m \ddot{x} + k x = 0 \implies \ddot{x} + \omega_n^2 x = 0 m x ¨ + k x = 0 ⟹ x ¨ + ω n 2 x = 0 Natural Circular Frequency: ω n = k m (rad/s) \text{Natural Circular Frequency: } \omega_n = \sqrt{\frac{k}{m}} \text{ (rad/s)} Natural Circular Frequency: ω n = m k (rad/s) Natural Frequency (Hz): f n = ω n 2 π = 1 2 π k m = 1 2 π g Δ st \text{Natural Frequency (Hz): } f_n = \frac{\omega_n}{2\pi} = \frac{1}{2\pi} \sqrt{\frac{k}{m}} = \frac{1}{2\pi} \sqrt{\frac{g}{\Delta_{\text{st}}}} Natural Frequency (Hz): f n = 2 π ω n = 2 π 1 m k = 2 π 1 Δ st g Time Period: T n = 1 f n = 2 π m k = 2 π Δ st g \text{Time Period: } T_n = \frac{1}{f_n} = 2\pi \sqrt{\frac{m}{k}} = 2\pi \sqrt{\frac{\Delta_{\text{st}}}{g}} Time Period: T n = f n 1 = 2 π k m = 2 π g Δ st
Where Δ st = m g k \Delta_{\text{st}} = \frac{m g}{k} Δ st = k m g is the static deflection of the spring under mass weight. +-------------------------------------------------------------------------+
- | EQUIVALENT STIFFNESS FORMULATIONS |
- +-------------------------------------------------------------------------+
- | Configuration | Equivalent Stiffness (k_eq) | Physical Condition |
- +------------------+-------------------------------+----------------------+
- | Parallel Springs | k_eq = k1 + k2 + ... + kn | Same deflection, |
- | | | forces add |
- +------------------+-------------------------------+----------------------+
- | Series Springs | 1/k_eq = 1/k1 + 1/k2 + ... | Same force, |
- | | k_eq = (k1 * k2) / (k1 + k2) | deflections add |
- +------------------+-------------------------------+----------------------+
- | Cantilever Beam | k_eq = (3 * E * I) / L^3 | Point load at free tip|
- +------------------+-------------------------------+----------------------+
- | Simply Supported | k_eq = (48 * E * I) / L^3 | Point load at midspan|
- +------------------+-------------------------------+----------------------+
- | Fixed-Fixed Beam | k_eq = (192 * E * I) / L^3 | Point load at midspan|
- +------------------+-------------------------------+----------------------+
- | Torsional Shaft | k_t = (G * J) / L | Angle of twist theta |
- +------------------+-------------------------------+----------------------+
- 2. Viscously Damped Free SDOF Vibrations
- Governing Differential Equation
When a viscous dashpot producing damping force F d = − c x ˙ F_d = -c \dot{x} F d = − c x ˙ is added: m x ¨ + c x ˙ + k x = 0 ⟹ x ¨ + 2 ζ ω n x ˙ + ω n 2 x = 0 m \ddot{x} + c \dot{x} + k x = 0 \implies \ddot{x} + 2\zeta \omega_n \dot{x} + \omega_n^2 x = 0 m x ¨ + c x ˙ + k x = 0 ⟹ x ¨ + 2 ζ ω n x ˙ + ω n 2 x = 0
Critical Damping Coefficient ( c c c_c c c ): The minimum damping coefficient for which motion becomes non-oscillatory: c c = 2 k m = 2 m ω n c_c = 2\sqrt{k m} = 2 m \omega_n c c = 2 km = 2 m ω n
Damping Ratio / Damping Factor ( ζ \zeta ζ ): ζ = c c c = c 2 k m = c 2 m ω n \zeta = \frac{c}{c_c} = \frac{c}{2\sqrt{k m}} = \frac{c}{2 m \omega_n} ζ = c c c = 2 km c = 2 m ω n c DAMPED FREE RESPONSE REGIMES:
- Displacement x(t)
- ^
- | Overdamped (zeta > 1) ---------\
- | Critically Damped (zeta = 1) ---\
- | \
- | Underdamped (zeta < 1) \
- | /---\ \
- --+-----+-----+---\----------------------+------------------> Time t
- | / \ \---/\
- | / \ \---
- v
The Three Damping Regimes:
Overdamped ( ζ > 1 \zeta > 1 ζ > 1 ):
Roots are real, negative, and unequal: s 1 , 2 = ( − ζ ± ζ 2 − 1 ) ω n s_{1,2} = (-\zeta \pm \sqrt{\zeta^2 - 1})\omega_n s 1 , 2 = ( − ζ ± ζ 2 − 1 ) ω n .
Aperiodic, non-oscillatory sluggish return to equilibrium.
Critically Damped ( ζ = 1 \zeta = 1 ζ = 1 ):
Roots are real, negative, and equal: s 1 , 2 = − ω n s_{1,2} = -\omega_n s 1 , 2 = − ω n .
Fastest non-oscillatory return to equilibrium without overshoot. Widely used in car suspension shock absorbers, artillery recoil mechanisms, and dial indicators.
Underdamped ( ζ < 1 \zeta < 1 ζ < 1 ):
Roots are complex conjugates: s 1 , 2 = − ζ ω n ± i ω d s_{1,2} = -\zeta \omega_n \pm i \omega_d s 1 , 2 = − ζ ω n ± i ω d .
Damped Natural Frequency ( ω d \omega_d ω d ): ω d = ω n 1 − ζ 2 \omega_d = \omega_n \sqrt{1 - \zeta^2} ω d = ω n 1 − ζ 2
Displacement response: x ( t ) = X 0 e − ζ ω n t sin ( ω d t + ϕ ) x(t) = X_0 e^{-\zeta \omega_n t} \sin(\omega_d t + \phi) x ( t ) = X 0 e − ζ ω n t sin ( ω d t + ϕ )
Logarithmic Decrement ( δ \delta δ )
The logarithmic decrement is defined as the natural logarithm of the ratio of any two successive peak amplitudes on the same side: δ = ln ( x 1 x 2 ) = 1 n ln ( x 1 x n + 1 ) = ζ ω n T d = ζ ω n ( 2 π ω d ) = 2 π ζ 1 − ζ 2 \delta = \ln\left( \frac{x_1}{x_2} \right) = \frac{1}{n} \ln\left( \frac{x_1}{x_{n+1}} \right) = \zeta \omega_n T_d = \zeta \omega_n \left( \frac{2\pi}{\omega_d} \right) = \frac{2\pi \zeta}{\sqrt{1 - \zeta^2}} δ = ln ( x 2 x 1 ) = n 1 ln ( x n + 1 x 1 ) = ζ ω n T d = ζ ω n ( ω d 2 π ) = 1 − ζ 2 2 π ζ
- For lightly damped systems ( ζ ≤ 0.2 \zeta \le 0.2 ζ ≤ 0.2 ): δ ≈ 2 π ζ \delta \approx 2\pi \zeta δ ≈ 2 π ζ
- 3. Harmonically Forced SDOF Vibrations
- Steady-State Response & Magnification Factor
For a system excited by harmonic force F ( t ) = F 0 sin ( ω t ) F(t) = F_0 \sin(\omega t) F ( t ) = F 0 sin ( ω t ) : m x ¨ + c x ˙ + k x = F 0 sin ( ω t ) m \ddot{x} + c \dot{x} + k x = F_0 \sin(\omega t) m x ¨ + c x ˙ + k x = F 0 sin ( ω t ) Steady-State Displacement: x ( t ) = X sin ( ω t − ϕ ) \text{Steady-State Displacement: } x(t) = X \sin(\omega t - \phi) Steady-State Displacement: x ( t ) = X sin ( ω t − ϕ )
Where:
- Static Deflection: x st = F 0 k x_{\text{st}} = \frac{F_0}{k} x st = k F 0
- Frequency Ratio: r = ω ω n r = \frac{\omega}{\omega_n} r = ω n ω
Steady-State Amplitude ( X X X ): X = x st ( 1 − r 2 ) 2 + ( 2 ζ r ) 2 X = \frac{x_{\text{st}}}{\sqrt{(1 - r^2)^2 + (2\zeta r)^2}} X = ( 1 − r 2 ) 2 + ( 2 ζ r ) 2 x st
Magnification Factor (Dynamic Magnifier, MF \text{MF} MF ): MF = X x st = 1 ( 1 − r 2 ) 2 + ( 2 ζ r ) 2 \text{MF} = \frac{X}{x_{\text{st}}} = \frac{1}{\sqrt{(1 - r^2)^2 + (2\zeta r)^2}} MF = x st X = ( 1 − r 2 ) 2 + ( 2 ζ r ) 2 1
Phase Angle ( ϕ \phi ϕ ): tan ϕ = 2 ζ r 1 − r 2 \tan\phi = \frac{2\zeta r}{1 - r^2} tan ϕ = 1 − r 2 2 ζ r MAGNIFICATION FACTOR vs. FREQUENCY RATIO (r):
- MF
- ^
- | /|\ Resonance (r = 1)
- | / | \ Peak MF = 1 / (2*zeta)
- | / | \
- | / | \
- 1+----+ | \------\ (zeta = 0.1)
- | \ | \-------\
- | \----+---------------------\ (zeta = 0.5)
- +-----+----+-------------------------------------> Frequency Ratio r = w / w_n
- 0 1 sqrt(2)
- Stiffness Damping Inertia / Mass
- Controlled Controlled Controlled
Frequency Domain Characteristics:
Low Frequency ( r ≪ 1 r \ll 1 r ≪ 1 ): MF ≈ 1 , ϕ ≈ 0 ∘ \text{MF} \approx 1, \phi \approx 0^{\circ} MF ≈ 1 , ϕ ≈ 0 ∘ . Dynamic amplitude equals static deflection; governed by spring stiffness .
Resonance ( r = 1 r = 1 r = 1 ): MF res = 1 2 ζ , ϕ = 90 ∘ \text{MF}_{\text{res}} = \frac{1}{2\zeta}, \phi = 90^{\circ} MF res = 2 ζ 1 , ϕ = 9 0 ∘ . Displacement lags force by 90 ∘ 90^{\circ} 9 0 ∘ ; amplitude is restrained entirely by damping .
High Frequency ( r ≫ 1 r \gg 1 r ≫ 1 ): MF → 0 , ϕ → 180 ∘ \text{MF} \to 0, \phi \to 180^{\circ} MF → 0 , ϕ → 18 0 ∘ . Mass inertia dominates response; force is in direct opposition to motion.
Loading diagram... Vibration Isolation and Transmissibility Regimes
- 4. Vibration Isolation & Transmissibility
- Transmissibility Ratio ( TR \text{TR} TR )
Vibration isolation mounts attenuate the dynamic force transmitted to the foundation ( F T F_T F T ). Transmissibility is the ratio of transmitted force to excitation force: TR = F T F 0 = 1 + ( 2 ζ r ) 2 ( 1 − r 2 ) 2 + ( 2 ζ r ) 2 \text{TR} = \frac{F_T}{F_0} = \frac{\sqrt{1 + (2\zeta r)^2}}{\sqrt{(1 - r^2)^2 + (2\zeta r)^2}} TR = F 0 F T = ( 1 − r 2 ) 2 + ( 2 ζ r ) 2 1 + ( 2 ζ r ) 2
Fundamental Rules of Vibration Isolation:
Amplification Region ( r < 2 r < \sqrt{2} r < 2 ): TR > 1 \text{TR} > 1 TR > 1 . Force transmitted to the foundation is larger than the excitation force. Damping reduces resonance peak, which is helpful.
Crossover Point ( r = 2 r = \sqrt{2} r = 2 ): TR = 1 \text{TR} = 1 TR = 1 for all values of damping ζ \zeta ζ . All transmissibility curves pass through ( r = 2 , TR = 1 ) (r = \sqrt{2}, \text{TR} = 1) ( r = 2 , TR = 1 ) .
Active Isolation Region ( r > 2 r > \sqrt{2} r > 2 ): TR < 1 \text{TR} < 1 TR < 1 . Vibration isolation is effective only when r > 2 r > \sqrt{2} r > 2 (i.e., operating frequency ω > 2 ω n \omega > \sqrt{2}\omega_n ω > 2 ω n ).
Damping Trade-off in Isolation: When r > 2 r > \sqrt{2} r > 2 , increasing damping ζ \zeta ζ increases TR \text{TR} TR , thereby degrading isolation efficiency. However, a small amount of damping is required to prevent catastrophic vibration while passing through resonance during engine startup and shutdown.
5. Whirling / Critical Speed of Shafts
The critical speed (whirling speed) of a rotating shaft occurs when the shaft rotational speed ω \omega ω matches its natural lateral vibration frequency ω n \omega_n ω n : ω c = ω n = k m = g Δ st \omega_c = \omega_n = \sqrt{\frac{k}{m}} = \sqrt{\frac{g}{\Delta_{\text{st}}}} ω c = ω n = m k = Δ st g
For a rotor of mass m m m with center of mass eccentric by distance e e e from geometric center: r d = e ⋅ r 2 1 − r 2 = e ⋅ ( ω / ω c ) 2 1 − ( ω / ω c ) 2 r_d = \frac{e \cdot r^2}{1 - r^2} = \frac{e \cdot (\omega/\omega_c)^2}{1 - (\omega/\omega_c)^2} r d = 1 − r 2 e ⋅ r 2 = 1 − ( ω / ω c ) 2 e ⋅ ( ω / ω c ) 2
At ω ≪ ω c \omega \ll \omega_c ω ≪ ω c : Deflection r d → 0 r_d \to 0 r d → 0 ; heavy spot rotates outside.
At ω = ω c \omega = \omega_c ω = ω c : Resonant whirling ( r d → ∞ r_d \to \infty r d → ∞ ).
At ω ≫ ω c \omega \gg \omega_c ω ≫ ω c : r d → − e r_d \to -e r d → − e ; the center of gravity aligns itself with the rotation axis (self-centering behavior).
- 6. Worked Numerical Examples
- Example 1: Logarithmic Decrement & Damping Calculation
Problem: A vibrating coal screen of mass m = 25 kg m = 25\text{ kg} m = 25 kg is supported by springs of equivalent stiffness k = 10000 N/m k = 10000\text{ N/m} k = 10000 N/m . A viscous damper is attached. An initial displacement is given, and the amplitude drops from x 0 = 16 mm x_0 = 16\text{ mm} x 0 = 16 mm to x 5 = 2.0 mm x_5 = 2.0\text{ mm} x 5 = 2.0 mm after 5 complete cycles. Calculate:
The logarithmic decrement δ \delta δ .
The damping ratio ζ \zeta ζ and damping coefficient c c c .
The damped natural frequency ω d \omega_d ω d and damped time period T d T_d T d .
Solution:
Logarithmic Decrement ( δ \delta δ ): δ = 1 n ln ( x 0 x n ) = 1 5 ln ( 16 2 ) = 1 5 ln ( 8 ) = 1 5 ( 2.0794 ) = 0.4159 \delta = \frac{1}{n} \ln\left(\frac{x_0}{x_n}\right) = \frac{1}{5} \ln\left(\frac{16}{2}\right) = \frac{1}{5} \ln(8) = \frac{1}{5}(2.0794) = 0.4159 δ = n 1 ln ( x n x 0 ) = 5 1 ln ( 2 16 ) = 5 1 ln ( 8 ) = 5 1 ( 2.0794 ) = 0.4159
Damping Ratio ( ζ \zeta ζ ): δ = 2 π ζ 1 − ζ 2 ⟹ δ 2 4 π 2 = ζ 2 1 − ζ 2 \delta = \frac{2\pi\zeta}{\sqrt{1 - \zeta^2}} \implies \frac{\delta^2}{4\pi^2} = \frac{\zeta^2}{1 - \zeta^2} δ = 1 − ζ 2 2 π ζ ⟹ 4 π 2 δ 2 = 1 − ζ 2 ζ 2 ( 0.4159 ) 2 4 π 2 = 0.1730 39.478 = 0.004382 = ζ 2 1 − ζ 2 \frac{(0.4159)^2}{4\pi^2} = \frac{0.1730}{39.478} = 0.004382 = \frac{\zeta^2}{1 - \zeta^2} 4 π 2 ( 0.4159 ) 2 = 39.478 0.1730 = 0.004382 = 1 − ζ 2 ζ 2 ζ 2 = 0.004382 ( 1 − ζ 2 ) ⟹ 1.004382 ζ 2 = 0.004382 ⟹ ζ = 0.004363 = 0.06605 \zeta^2 = 0.004382 (1 - \zeta^2) \implies 1.004382 \zeta^2 = 0.004382 \implies \zeta = \sqrt{0.004363} = 0.06605 ζ 2 = 0.004382 ( 1 − ζ 2 ) ⟹ 1.004382 ζ 2 = 0.004382 ⟹ ζ = 0.004363 = 0.06605
Critical Damping ( c c c_c c c ) and Actual Damping ( c c c ): ω n = k m = 10000 25 = 400 = 20.0 rad/s \omega_n = \sqrt{\frac{k}{m}} = \sqrt{\frac{10000}{25}} = \sqrt{400} = 20.0\text{ rad/s} ω n = m k = 25 10000 = 400 = 20.0 rad/s c c = 2 m ω n = 2 × 25 × 20.0 = 1000 N ⋅ s/m c_c = 2 m \omega_n = 2 \times 25 \times 20.0 = 1000\text{ N}\cdot\text{s/m} c c = 2 m ω n = 2 × 25 × 20.0 = 1000 N ⋅ s/m c = ζ c c = 0.06605 × 1000 = 66.05 N ⋅ s/m c = \zeta c_c = 0.06605 \times 1000 = 66.05\text{ N}\cdot\text{s/m} c = ζ c c = 0.06605 × 1000 = 66.05 N ⋅ s/m
Damped Frequency ( ω d \omega_d ω d ) and Time Period ( T d T_d T d ): ω d = ω n 1 − ζ 2 = 20.0 × 1 − ( 0.06605 ) 2 = 20.0 × 0.9956 = 19.956 rad/s \omega_d = \omega_n \sqrt{1 - \zeta^2} = 20.0 \times \sqrt{1 - (0.06605)^2} = 20.0 \times \sqrt{0.9956} = 19.956\text{ rad/s} ω d = ω n 1 − ζ 2 = 20.0 × 1 − ( 0.06605 ) 2 = 20.0 × 0.9956 = 19.956 rad/s T d = 2 π ω d = 2 π 19.956 = 0.3148 seconds T_d = \frac{2\pi}{\omega_d} = \frac{2\pi}{19.956} = 0.3148\text{ seconds} T d = ω d 2 π = 19.956 2 π = 0.3148 seconds
Example 2: Vibration Isolation Mount Design
Problem: A heavy coal pulverizer of mass M = 500 kg M = 500\text{ kg} M = 500 kg operates at an engine speed of N = 1200 rpm N = 1200\text{ rpm} N = 1200 rpm ( 125.66 rad/s 125.66\text{ rad/s} 125.66 rad/s ). It is mounted on rubber isolation pads with negligible damping ( ζ ≈ 0 \zeta \approx 0 ζ ≈ 0 ). Design the spring stiffness k k k so that only 10 % 10\% 10% of the unbalanced dynamic force is transmitted to the supporting concrete foundation (i.e., TR = 0.10 \text{TR} = 0.10 TR = 0.10 ).
Solution:
Determine Required Frequency Ratio ( r r r ): For undamped isolation ( ζ = 0 \zeta = 0 ζ = 0 ) in the active isolation zone ( r > 2 r > \sqrt{2} r > 2 ): TR = 1 r 2 − 1 = 0.10 \text{TR} = \frac{1}{r^2 - 1} = 0.10 TR = r 2 − 1 1 = 0.10 r 2 − 1 = 1 0.10 = 10 ⟹ r 2 = 11 ⟹ r = 11 ≈ 3.3166 r^2 - 1 = \frac{1}{0.10} = 10 \implies r^2 = 11 \implies r = \sqrt{11} \approx 3.3166 r 2 − 1 = 0.10 1 = 10 ⟹ r 2 = 11 ⟹ r = 11 ≈ 3.3166
Determine Required Natural Frequency ( ω n \omega_n ω n ): r = ω ω n ⟹ ω n = ω r = 125.66 rad/s 3.3166 = 37.888 rad/s r = \frac{\omega}{\omega_n} \implies \omega_n = \frac{\omega}{r} = \frac{125.66\text{ rad/s}}{3.3166} = 37.888\text{ rad/s} r = ω n ω ⟹ ω n = r ω = 3.3166 125.66 rad/s = 37.888 rad/s
Calculate Required Total Foundation Stiffness ( k k k ): ω n = k M ⟹ k = M ω n 2 \omega_n = \sqrt{\frac{k}{M}} \implies k = M \omega_n^2 ω n = M k ⟹ k = M ω n 2 k = 500 kg × ( 37.888 ) 2 = 500 × 1435.5 = 717750 N/m = 717.75 kN/m k = 500\text{ kg} \times (37.888)^2 = 500 \times 1435.5 = 717750\text{ N/m} = 717.75\text{ kN/m} k = 500 kg × ( 37.888 ) 2 = 500 × 1435.5 = 717750 N/m = 717.75 kN/m
Static Deflection Verification: Δ st = M g k = 500 × 9.81 717750 = 4905 717750 = 0.00683 m = 6.83 mm \Delta_{\text{st}} = \frac{M g}{k} = \frac{500 \times 9.81}{717750} = \frac{4905}{717750} = 0.00683\text{ m} = 6.83\text{ mm} Δ st = k M g = 717750 500 × 9.81 = 717750 4905 = 0.00683 m = 6.83 mm
(A static deflection of 6.83 mm 6.83\text{ mm} 6.83 mm is well within acceptable standard limits for industrial vibration mount pads).