Study guide

12.7 Air & Gas Compressors: Reciprocating, Rotary & Multi-Stage

Coal India Management Trainee CIL MT

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: CIL MT Exam Overview & Coal Sector Landscape

1.1 CIL MT Exam Pattern, Marking Scheme & Strategy 1.2 Coal India Limited: Corporate Structure, Maharatna Status & Subsidiaries 1.3 Indian Coal Mining Sector, Energy Mix & Environmental Regulations

2 Chapter 2: Paper-I General Awareness, Polity & Current Affairs

2.1 Indian Constitution, Governance & Statutory Bodies 2.2 Indian Economy, Union Budget & Economic Planning 2.3 Indian Geography, Mineral Belts & Environmental Ecology 2.4 Modern Indian History, Freedom Struggle & Cultural Heritage 2.5 General Science: Physics, Chemistry & Biology Fundamentals 2.6 Inventions, Discoveries & Scientific-Technological Development 2.7 Uses of Internet, Computer Awareness & Digital Governance 2.8 National & International Organisations 2.9 Awards, Honours & Sports 2.10 Books & Authors, Important Monuments & Places of India 2.11 Ports, Power Plants & Infrastructure of India 2.12 Climate Change, SDGs, National Parks & Wildlife Sanctuaries 2.13 Flagship Government Programmes & Current Affairs Method 2.14 World Physical, Social & Economic Geography

3 Chapter 3: Paper-I Reasoning & Logical Ability

3.1 Series Completion, Coding-Decoding & Semantic Analogies 3.2 Syllogisms, Logical Deduction & Venn Diagrams 3.3 Seating Arrangements, Linear/Circular Alignments & Puzzles 3.4 Direction Sense, Blood Relations & Order/Ranking 3.5 Alphabetical & Alphanumeric Series 3.6 Statement & Conclusions, Statement & Arguments 3.7 Clocks & Calendars 3.8 Cubes, Dice & Figure Counting 3.9 Mirror Images, Water Images, Embedded Figures & Non-Verbal Series 3.10 Decision Making & Data Analysis in Reasoning

4 Chapter 4: Paper-I Numerical Ability & Quantitative Aptitude

4.1 Arithmetic Foundations: Percentages, Profit & Loss, Ratio & Proportion 4.2 Averages, Simple/Compound Interest, Alligations & Mixtures 4.3 Time & Work, Pipes & Cisterns, Time, Speed & Distance 4.4 Algebra, Mensuration, Geometry & Data Interpretation (DI) 4.5 Number System, LCM, HCF & Decimal Fractions 4.6 Surds, Indices & Simplification 4.7 Problems on Ages 4.8 Boats & Streams and Problems on Trains 4.9 Permutations & Combinations 4.10 Probability for Quantitative Aptitude

5 Chapter 5: Paper-I General English & Verbal Ability

5.1 English Grammar, Error Spotting & Sentence Correction 5.2 Vocabulary Building: Synonyms, Antonyms, Idioms & Phrases 5.3 Reading Comprehension, Cloze Tests & Para Jumbles 5.4 Fill in the Blanks, Cloze Passages & Sentence Completion 5.5 Jumbled Sentences & Sentence Improvement

6 Chapter 6: Paper-II Engineering Mathematics

6.1 Matrix Algebra, Rank & Systems of Linear Equations 6.2 Eigenvalues, Eigenvectors & the Cayley-Hamilton Theorem 6.3 Limits, Continuity, Differentiability & Mean Value Theorems 6.4 Maxima-Minima, Indeterminate Forms & Taylor Series 6.5 Definite, Improper, Double & Triple Integrals 6.6 Partial Derivatives, Total Derivative & Multivariable Optimisation 6.7 First-Order Differential Equations: Linear & Non-Linear 6.8 Higher-Order Linear Differential Equations & Engineering Applications 6.9 Laplace Transforms & Transfer-Function Methods 6.10 Probability, Conditional Probability & Bayes' Theorem 6.11 Random Variables, Distributions & Descriptive Statistics 6.12 Numerical Methods: Root Finding, Integration & ODE Solvers

7 Chapter 7: Paper-II Engineering Mechanics & Statics-Dynamics

7.1 Force Systems, Coplanar Equilibrium & Lami's Theorem 7.2 Plane Trusses, Friction Mechanics & Screws/Wedges 7.3 Centroids, Center of Gravity & Moment of Inertia 7.4 Kinematics, Kinetics of Particles & Rigid Body Dynamics 7.5 Virtual Work & Lagrange's Equation 7.6 Rolling Friction, Belt-Pulley Drives, Brakes, Clutches & Vehicle Dynamics

8 Chapter 8: Paper-II Mechanics of Materials & Structural Integrity

8.1 Simple Stresses, Strains, Elastic Moduli & Thermal Stresses 8.2 Principal Stresses, Strain Energy & Mohr's Circle 8.3 Shear Force & Bending Moment Diagrams, Beam Bending & Shear Stresses 8.4 Torsion of Circular Shafts, Springs & Column Buckling 8.5 Thin Cylinders, Spheres & Thick-Walled Pressure Vessels 8.6 Deflection of Beams: Double Integration, Macaulay & Moment-Area 8.7 Shear Centre & Unsymmetrical Bending 8.8 Strain Gauges, Rosettes & Experimental Stress Analysis 8.9 Mechanical Testing: Universal Testing Machine, Hardness & Impact

9 Chapter 9: Paper-II Theory of Machines & Mechanical Vibrations

9.1 Simple Mechanisms, Kinematic Inversions & Velocity/Acceleration Diagrams 9.2 Cams & Followers, Toothed Gearing & Epicyclic Gear Trains 9.3 Flywheels, Centrifugal/Inertia Governors & Rotor Balancing 9.4 Free, Damped & Forced Single-Degree-of-Freedom Vibrations 9.5 Gyroscopic Couple & Gyroscopic Effects

10 Chapter 10: Paper-II Machine Design & Failure Theories

10.1 Static Failure Theories & Variable/Fatigue Loading 10.2 Design of Threaded Fasteners, Welded & Riveted Joints 10.3 Design of Shafts, Keys, Couplings & Rolling/Sliding Bearings 10.4 Design of Spur, Helical, Bevel & Worm Gears 10.5 Design of Helical, Leaf & Torsion Springs 10.6 Design of Brakes & Clutches: Energy, Lining Pressure & Heat

11 Chapter 11: Paper-II Fluid Mechanics & Hydraulic Machinery

11.1 Fluid Properties, Hydrostatic Forces & Buoyancy 11.2 Fluid Kinematics, Continuity & Bernoulli's Equation 11.3 Viscous Flow in Pipes, Boundary Layer & Minor Losses 11.4 Hydraulic Turbines, Centrifugal & Reciprocating Pumps 11.5 Dimensional Analysis, Similitude & Model Testing 11.6 Control-Volume Analysis: Continuity, Momentum & Energy

12 Chapter 12: Paper-II Thermodynamics, Thermal Cycles & Turbomachinery

12.1 Fundamental Concepts, First & Second Laws of Thermodynamics 12.2 Entropy, Availability, Exergy & Properties of Pure Substances 12.3 Air-Standard Gas Power Cycles: Otto, Diesel, Dual & Brayton 12.4 Vapour Power Cycles: Ideal, Reheat & Regenerative Rankine Cycles 12.5 Thermodynamic Relations: Maxwell, Clausius-Clapeyron & Joule-Thomson 12.6 Behaviour of Ideal & Real Gases and Equations of State 12.7 Air & Gas Compressors: Reciprocating, Rotary & Multi-Stage 12.8 Steam & Gas Turbines: Impulse, Reaction & Velocity Diagrams

13 Chapter 13: Paper-II Heat Transfer, Refrigeration & Air Conditioning

13.1 Steady & Unsteady Conduction, Extended Surfaces (Fins) 13.2 Forced/Natural Convection, Radiation & Heat Exchanger LMTD/NTU 13.3 Vapour Compression & Vapour Absorption Refrigeration Systems 13.4 Psychrometric Properties, Processes & Air Conditioning Systems 13.5 Gas Refrigeration, Heat Pump Cycles & Cryogenics

14 Chapter 14: Paper-II Materials Science, Metallurgy & Manufacturing Technology

14.1 Crystal Structures, Phase Diagrams & Iron-Iron Carbide Equilibrium 14.2 Heat Treatment Processes & Engineering Alloy Steels 14.3 Casting Processes, Metal Forming & Welding Metallurgy 14.4 Metal Cutting Mechanics, Tool Life & Machine Tools 14.5 Plastic Deformation, Yield Criteria & Load Estimation in Bulk Forming 14.6 Sheet Metal Forming: Shearing, Bending & Deep Drawing 14.7 Powder Metallurgy 14.8 Brazing, Soldering & Adhesive Bonding 14.9 Non-Traditional Machining: EDM, ECM, USM, AJM, LBM & EBM 14.10 Abrasive Machining, Grinding & Superfinishing 14.11 Principles of Work Holding, Jigs & Fixtures 14.12 Economics of Machining & Tool Life Optimisation

15 Chapter 15: Paper-II Metrology, Quality Control & Industrial Engineering / OR

15.1 Limits, Fits, Tolerances, Gauges & Surface Metrology 15.2 Production Planning, Forecasting & Inventory Control Models 15.3 Operations Research: Linear Programming & Transportation/Assignment 15.4 Project Management: CPM, PERT, Network Analysis & Crashing 15.5 Comparators & Interferometry 15.6 Coordinate Measuring Machines & Machine Tool Alignment Testing 15.7 Computer Integrated Manufacturing: CAD/CAM & Integration Tools 15.8 NC/CNC Machines & CNC Part Programming 15.9 Material Requirements Planning, Scheduling & Sequencing 15.10 Queuing Theory & Simple Queuing Models 15.11 Network Flow Models: Shortest Route, Maximal Flow & Spanning Tree

12.7 Air & Gas Compressors: Reciprocating, Rotary & Multi-Stage

Key Takeaways Explain This Topic AI

Air and gas compressors are named explicitly as the first item under Applications, Power Engineering in the CIL Mechanical Paper-II syllabus.

Isothermal compression requires the least work and adiabatic the most, which is why intercooling is used to push real compression towards the isothermal ideal.

Volumetric efficiency falls as the pressure ratio or the clearance ratio rises, and it reaches zero at the pressure ratio where the clearance gas alone fills the swept volume.

For a two-stage compressor with perfect intercooling, minimum work occurs when each stage has the same pressure ratio, so the intermediate pressure is the geometric mean of the suction and delivery pressures.

Last updated: August 2026

Why Compressors Matter in a Mine

Compressed air is the workhorse utility of underground and surface coal operations: rock drills, pneumatic loaders, hoist controls, instrument air and dust-suppression sprays all depend on it. Compressed air is also notoriously inefficient — a large fraction of the input electrical energy is rejected as heat — so understanding where that loss arises is a genuine operational skill, not just an exam topic.

Classification

  • Type Principle Typical duty
  • Reciprocating Positive displacement by piston High pressure, moderate flow
  • Rotary screw Positive displacement by meshing rotors Continuous plant air; the mining workhorse
  • Rotary vane Positive displacement by sliding vanes Small to medium duty
  • Roots blower Positive displacement, no internal compression Low pressure, high volume
  • Centrifugal Dynamic, radial Large flow, moderate pressure
  • Axial Dynamic, axial Very large flow; gas turbine compressors
  • Work of Compression: Reciprocating, No Clearance

For a polytropic process p v n = C pv^{n} = C p v n = C , the work per cycle for an ideal compressor without clearance is W = n n − 1 p 1 V 1 [ ( p 2 p 1 ) ( n − 1 ) / n − 1 ] W = \frac{n}{n-1}\,p_1V_1\left[\left(\frac{p_2}{p_1}\right)^{(n-1)/n} - 1\right] W = n − 1 n ​ p 1 ​ V 1 ​ [ ( p 1 ​ p 2 ​ ​ ) ( n − 1 ) / n − 1 ]

The index n n n decides how much work is required:

  • Process Index Work Practicality
  • Isothermal n = 1 n = 1 n = 1 Minimum Ideal; requires perfect cooling
  • Polytropic 1 < n < γ 1 < n < \gamma 1 < n < γ Intermediate Real machines
  • Adiabatic (isentropic) n = γ n = \gamma n = γ Maximum Ideal; no cooling at all

For isothermal compression the expression degenerates to W iso = p 1 V 1 ln ⁡ p 2 p 1 W_{\text{iso}} = p_1V_1\ln\frac{p_2}{p_1} W iso ​ = p 1 ​ V 1 ​ ln p 1 ​ p 2 ​ ​

Isothermal work is the minimum , and this single fact drives the entire design of compressor cooling. On a p p p - V V V diagram the isothermal curve lies below the adiabatic, and the area between them is the work saved by cooling.

Isothermal efficiency η iso = Isothermal work Actual indicated work \eta_{\text{iso}} = \frac{\text{Isothermal work}}{\text{Actual indicated work}} η iso ​ = Actual indicated work Isothermal work ​

This is the standard yardstick for a reciprocating compressor, and improving it means improving cooling — water jackets, finned cylinders, and above all intercooling between stages.

Clearance Volume and Volumetric Efficiency

A real cylinder cannot have zero clearance: valves, gaskets and thermal expansion require a small volume V c V_c V c ​ at top dead centre. That trapped high-pressure gas re-expands on the suction stroke before the inlet valve can open, so less fresh air is drawn in than the swept volume V s V_s V s ​ .

Defining the clearance ratio C = V c / V s C = V_c/V_s C = V c ​ / V s ​ , the volumetric efficiency is η v = 1 + C − C ( p 2 p 1 ) 1 / n \boxed{\eta_v = 1 + C - C\left(\frac{p_2}{p_1}\right)^{1/n}} η v ​ = 1 + C − C ( p 1 ​ p 2 ​ ​ ) 1/ n ​

Two consequences follow directly:

η v \eta_v η v ​ falls as the pressure ratio rises. At a sufficiently high pressure ratio, the re-expanding clearance gas fills the entire swept volume and η v \eta_v η v ​ reaches zero — the compressor delivers nothing at all.

η v \eta_v η v ​ falls as clearance increases. Hence the practical limit on single-stage pressure ratio, typically about 5 to 8.

Importantly, clearance does not affect the work per unit mass delivered in the ideal analysis, because the work recovered during re-expansion equals that spent compressing the clearance gas. It reduces capacity , not efficiency — a distinction frequently tested.

Worked example. A compressor has 5% clearance and operates at a pressure ratio of 6 with n = 1.3 n = 1.3 n = 1.3 . η v = 1 + 0.05 − 0.05 × 6 1 / 1.3 = 1.05 − 0.05 × 4.03 = 1.05 − 0.202 = 0.848 \eta_v = 1 + 0.05 - 0.05\times6^{1/1.3} = 1.05 - 0.05\times4.03 = 1.05 - 0.202 = 0.848 η v ​ = 1 + 0.05 − 0.05 × 6 1/1.3 = 1.05 − 0.05 × 4.03 = 1.05 − 0.202 = 0.848

So 84.8%. At a pressure ratio of 20 the same machine would give 1.05 − 0.05 × 10.6 = 0.52 1.05 - 0.05\times10.6 = 0.52 1.05 − 0.05 × 10.6 = 0.52 , and the case for staging becomes obvious.

Multi-Stage Compression with Intercooling

Splitting the compression into stages with a heat exchanger between them achieves three things at once:

Reduced work , by approaching isothermal compression in steps.

Improved volumetric efficiency , since each stage has a modest pressure ratio.

Lower delivery temperature , protecting lubricant and valves.

Optimum intermediate pressure

For a two-stage machine with perfect intercooling — that is, the gas returns to its original suction temperature between stages — the total work is W = n n − 1 R T 1 [ ( p i p 1 ) ( n − 1 ) / n + ( p 2 p i ) ( n − 1 ) / n − 2 ] W = \frac{n}{n-1}\,RT_1\left[\left(\frac{p_i}{p_1}\right)^{(n-1)/n} + \left(\frac{p_2}{p_i}\right)^{(n-1)/n} - 2\right] W = n − 1 n ​ R T 1 ​ [ ( p 1 ​ p i ​ ​ ) ( n − 1 ) / n + ( p i ​ p 2 ​ ​ ) ( n − 1 ) / n − 2 ]

Differentiating with respect to p i p_i p i ​ and setting the result to zero gives p i = p 1 p 2 \boxed{p_i = \sqrt{p_1 p_2}} p i ​ = p 1 ​ p 2 ​ ​ ​

The optimum intermediate pressure is the geometric mean of suction and delivery pressures, which means both stages operate at the same pressure ratio . For z z z stages the generalisation is Pressure ratio per stage = ( p z + 1 p 1 ) 1 / z \text{Pressure ratio per stage} = \left(\frac{p_{z+1}}{p_1}\right)^{1/z} Pressure ratio per stage = ( p 1 ​ p z + 1 ​ ​ ) 1/ z

Under these conditions each stage does equal work , and the total is W = z n n − 1 R T 1 [ ( p z + 1 p 1 ) ( n − 1 ) / n z − 1 ] W = z\,\frac{n}{n-1}RT_1\left[\left(\frac{p_{z+1}}{p_1}\right)^{(n-1)/nz} - 1\right] W = z n − 1 n ​ R T 1 ​ [ ( p 1 ​ p z + 1 ​ ​ ) ( n − 1 ) / n z − 1 ]

Worked example. Air is compressed from 1 bar to 25 bar in two stages with perfect intercooling. The optimum intermediate pressure is p i = 1 × 25 = 5 bar p_i = \sqrt{1\times25} = 5 \text{ bar} p i ​ = 1 × 25 ​ = 5 bar

so each stage works at a pressure ratio of 5.

Perfect versus imperfect intercooling

Perfect intercooling returns the gas exactly to the initial temperature; on a p p p - V V V diagram the second-stage suction point falls on the original isothermal through the suction state. Imperfect intercooling leaves the gas warmer, so the second stage draws in a larger volume and the work saving is reduced. Aftercooling, downstream of the last stage, removes moisture but saves no compression work.

  • Rotary Compressors
  • Screw compressor

Two helical rotors mesh so that trapped pockets of gas are progressively reduced in volume as they travel axially. Screw compressors dominate industrial and mining plant air because they deliver a continuous, pulsation-free flow, tolerate dusty environments, and have few wearing parts. Oil-flooded designs inject oil for sealing, cooling and lubrication, achieving compression close to isothermal in a single stage.

Roots blower

Two lobed rotors transfer gas without reducing its volume internally — compression occurs entirely by back-flow when the discharge port opens. There is no internal compression, so the process is far from isothermal and efficiency is poor at any significant pressure ratio. Roots blowers are used where large volumes at low pressure are needed, such as ventilation boosting.

Centrifugal and axial compressors

These are dynamic machines: energy is added as kinetic energy by an impeller or rotor and converted to pressure in a diffuser or stator. Their analysis follows Euler's turbomachine equation. Two characteristic instabilities must be recognised:

Surge : a system-wide flow oscillation and reversal that occurs when flow is throttled below a critical value. It is violent and can destroy the machine.

Choking : the limiting maximum flow, reached when the velocity at some section becomes sonic, so no further increase in flow is possible.

Efficiencies to Distinguish

  • Efficiency Definition
  • Volumetric Actual volume of free air delivered divided by swept volume
  • Isothermal Isothermal work divided by actual indicated work
  • Isentropic Isentropic work divided by actual work; used for dynamic machines
  • Mechanical Indicated power divided by shaft power
  • Overall Isothermal power divided by shaft power

A point worth remembering: isothermal efficiency is the standard for reciprocating machines with cooling, whereas isentropic efficiency is the standard for uncooled dynamic machines , because the appropriate ideal differs between the two.