Study guide

12.2 Entropy, Availability, Exergy & Properties of Pure Substances

Coal India Management Trainee CIL MT

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: CIL MT Exam Overview & Coal Sector Landscape

1.1 CIL MT Exam Pattern, Marking Scheme & Strategy 1.2 Coal India Limited: Corporate Structure, Maharatna Status & Subsidiaries 1.3 Indian Coal Mining Sector, Energy Mix & Environmental Regulations

2 Chapter 2: Paper-I General Awareness, Polity & Current Affairs

2.1 Indian Constitution, Governance & Statutory Bodies 2.2 Indian Economy, Union Budget & Economic Planning 2.3 Indian Geography, Mineral Belts & Environmental Ecology 2.4 Modern Indian History, Freedom Struggle & Cultural Heritage 2.5 General Science: Physics, Chemistry & Biology Fundamentals 2.6 Inventions, Discoveries & Scientific-Technological Development 2.7 Uses of Internet, Computer Awareness & Digital Governance 2.8 National & International Organisations 2.9 Awards, Honours & Sports 2.10 Books & Authors, Important Monuments & Places of India 2.11 Ports, Power Plants & Infrastructure of India 2.12 Climate Change, SDGs, National Parks & Wildlife Sanctuaries 2.13 Flagship Government Programmes & Current Affairs Method 2.14 World Physical, Social & Economic Geography

3 Chapter 3: Paper-I Reasoning & Logical Ability

3.1 Series Completion, Coding-Decoding & Semantic Analogies 3.2 Syllogisms, Logical Deduction & Venn Diagrams 3.3 Seating Arrangements, Linear/Circular Alignments & Puzzles 3.4 Direction Sense, Blood Relations & Order/Ranking 3.5 Alphabetical & Alphanumeric Series 3.6 Statement & Conclusions, Statement & Arguments 3.7 Clocks & Calendars 3.8 Cubes, Dice & Figure Counting 3.9 Mirror Images, Water Images, Embedded Figures & Non-Verbal Series 3.10 Decision Making & Data Analysis in Reasoning

4 Chapter 4: Paper-I Numerical Ability & Quantitative Aptitude

4.1 Arithmetic Foundations: Percentages, Profit & Loss, Ratio & Proportion 4.2 Averages, Simple/Compound Interest, Alligations & Mixtures 4.3 Time & Work, Pipes & Cisterns, Time, Speed & Distance 4.4 Algebra, Mensuration, Geometry & Data Interpretation (DI) 4.5 Number System, LCM, HCF & Decimal Fractions 4.6 Surds, Indices & Simplification 4.7 Problems on Ages 4.8 Boats & Streams and Problems on Trains 4.9 Permutations & Combinations 4.10 Probability for Quantitative Aptitude

5 Chapter 5: Paper-I General English & Verbal Ability

5.1 English Grammar, Error Spotting & Sentence Correction 5.2 Vocabulary Building: Synonyms, Antonyms, Idioms & Phrases 5.3 Reading Comprehension, Cloze Tests & Para Jumbles 5.4 Fill in the Blanks, Cloze Passages & Sentence Completion 5.5 Jumbled Sentences & Sentence Improvement

6 Chapter 6: Paper-II Engineering Mathematics

6.1 Matrix Algebra, Rank & Systems of Linear Equations 6.2 Eigenvalues, Eigenvectors & the Cayley-Hamilton Theorem 6.3 Limits, Continuity, Differentiability & Mean Value Theorems 6.4 Maxima-Minima, Indeterminate Forms & Taylor Series 6.5 Definite, Improper, Double & Triple Integrals 6.6 Partial Derivatives, Total Derivative & Multivariable Optimisation 6.7 First-Order Differential Equations: Linear & Non-Linear 6.8 Higher-Order Linear Differential Equations & Engineering Applications 6.9 Laplace Transforms & Transfer-Function Methods 6.10 Probability, Conditional Probability & Bayes' Theorem 6.11 Random Variables, Distributions & Descriptive Statistics 6.12 Numerical Methods: Root Finding, Integration & ODE Solvers

7 Chapter 7: Paper-II Engineering Mechanics & Statics-Dynamics

7.1 Force Systems, Coplanar Equilibrium & Lami's Theorem 7.2 Plane Trusses, Friction Mechanics & Screws/Wedges 7.3 Centroids, Center of Gravity & Moment of Inertia 7.4 Kinematics, Kinetics of Particles & Rigid Body Dynamics 7.5 Virtual Work & Lagrange's Equation 7.6 Rolling Friction, Belt-Pulley Drives, Brakes, Clutches & Vehicle Dynamics

8 Chapter 8: Paper-II Mechanics of Materials & Structural Integrity

8.1 Simple Stresses, Strains, Elastic Moduli & Thermal Stresses 8.2 Principal Stresses, Strain Energy & Mohr's Circle 8.3 Shear Force & Bending Moment Diagrams, Beam Bending & Shear Stresses 8.4 Torsion of Circular Shafts, Springs & Column Buckling 8.5 Thin Cylinders, Spheres & Thick-Walled Pressure Vessels 8.6 Deflection of Beams: Double Integration, Macaulay & Moment-Area 8.7 Shear Centre & Unsymmetrical Bending 8.8 Strain Gauges, Rosettes & Experimental Stress Analysis 8.9 Mechanical Testing: Universal Testing Machine, Hardness & Impact

9 Chapter 9: Paper-II Theory of Machines & Mechanical Vibrations

9.1 Simple Mechanisms, Kinematic Inversions & Velocity/Acceleration Diagrams 9.2 Cams & Followers, Toothed Gearing & Epicyclic Gear Trains 9.3 Flywheels, Centrifugal/Inertia Governors & Rotor Balancing 9.4 Free, Damped & Forced Single-Degree-of-Freedom Vibrations 9.5 Gyroscopic Couple & Gyroscopic Effects

10 Chapter 10: Paper-II Machine Design & Failure Theories

10.1 Static Failure Theories & Variable/Fatigue Loading 10.2 Design of Threaded Fasteners, Welded & Riveted Joints 10.3 Design of Shafts, Keys, Couplings & Rolling/Sliding Bearings 10.4 Design of Spur, Helical, Bevel & Worm Gears 10.5 Design of Helical, Leaf & Torsion Springs 10.6 Design of Brakes & Clutches: Energy, Lining Pressure & Heat

11 Chapter 11: Paper-II Fluid Mechanics & Hydraulic Machinery

11.1 Fluid Properties, Hydrostatic Forces & Buoyancy 11.2 Fluid Kinematics, Continuity & Bernoulli's Equation 11.3 Viscous Flow in Pipes, Boundary Layer & Minor Losses 11.4 Hydraulic Turbines, Centrifugal & Reciprocating Pumps 11.5 Dimensional Analysis, Similitude & Model Testing 11.6 Control-Volume Analysis: Continuity, Momentum & Energy

12 Chapter 12: Paper-II Thermodynamics, Thermal Cycles & Turbomachinery

12.1 Fundamental Concepts, First & Second Laws of Thermodynamics 12.2 Entropy, Availability, Exergy & Properties of Pure Substances 12.3 Air-Standard Gas Power Cycles: Otto, Diesel, Dual & Brayton 12.4 Vapour Power Cycles: Ideal, Reheat & Regenerative Rankine Cycles 12.5 Thermodynamic Relations: Maxwell, Clausius-Clapeyron & Joule-Thomson 12.6 Behaviour of Ideal & Real Gases and Equations of State 12.7 Air & Gas Compressors: Reciprocating, Rotary & Multi-Stage 12.8 Steam & Gas Turbines: Impulse, Reaction & Velocity Diagrams

13 Chapter 13: Paper-II Heat Transfer, Refrigeration & Air Conditioning

13.1 Steady & Unsteady Conduction, Extended Surfaces (Fins) 13.2 Forced/Natural Convection, Radiation & Heat Exchanger LMTD/NTU 13.3 Vapour Compression & Vapour Absorption Refrigeration Systems 13.4 Psychrometric Properties, Processes & Air Conditioning Systems 13.5 Gas Refrigeration, Heat Pump Cycles & Cryogenics

14 Chapter 14: Paper-II Materials Science, Metallurgy & Manufacturing Technology

14.1 Crystal Structures, Phase Diagrams & Iron-Iron Carbide Equilibrium 14.2 Heat Treatment Processes & Engineering Alloy Steels 14.3 Casting Processes, Metal Forming & Welding Metallurgy 14.4 Metal Cutting Mechanics, Tool Life & Machine Tools 14.5 Plastic Deformation, Yield Criteria & Load Estimation in Bulk Forming 14.6 Sheet Metal Forming: Shearing, Bending & Deep Drawing 14.7 Powder Metallurgy 14.8 Brazing, Soldering & Adhesive Bonding 14.9 Non-Traditional Machining: EDM, ECM, USM, AJM, LBM & EBM 14.10 Abrasive Machining, Grinding & Superfinishing 14.11 Principles of Work Holding, Jigs & Fixtures 14.12 Economics of Machining & Tool Life Optimisation

15 Chapter 15: Paper-II Metrology, Quality Control & Industrial Engineering / OR

15.1 Limits, Fits, Tolerances, Gauges & Surface Metrology 15.2 Production Planning, Forecasting & Inventory Control Models 15.3 Operations Research: Linear Programming & Transportation/Assignment 15.4 Project Management: CPM, PERT, Network Analysis & Crashing 15.5 Comparators & Interferometry 15.6 Coordinate Measuring Machines & Machine Tool Alignment Testing 15.7 Computer Integrated Manufacturing: CAD/CAM & Integration Tools 15.8 NC/CNC Machines & CNC Part Programming 15.9 Material Requirements Planning, Scheduling & Sequencing 15.10 Queuing Theory & Simple Queuing Models 15.11 Network Flow Models: Shortest Route, Maximal Flow & Spanning Tree

12.2 Entropy, Availability, Exergy & Properties of Pure Substances

Key Takeaways Explain This Topic AI

The Clausius Inequality ∮ δ Q T ≤ 0 \oint \frac{\delta Q}{T} \le 0 ∮ T δ Q ​ ≤ 0 establishes the boundary between reversible ( = 0 =0 = 0 ), irreversible ( < 0 <0 < 0 ), and impossible ( > 0 >0 > 0 ) thermodynamic cycles.

Entropy is an extensive state property ( d S = ( δ Q / T ) r e v dS = (\delta Q/T)_{rev} d S = ( δ Q / T ) re v ​ ); for isolated systems, entropy generation is strictly non-negative ( S g e n ≥ 0 S_{gen} \ge 0 S g e n ​ ≥ 0 ).

Exergy measures the maximum theoretical useful work attainable when transitioning to the ambient dead state ( P 0 , T 0 P_0, T_0 P 0 ​ , T 0 ​ ), with exergy destruction governed by the Gouy-Stodola theorem ( I = T 0 S g e n I = T_0 S_{gen} I = T 0 ​ S g e n ​ ).

Pure substance phase states are defined across P − v − T P-v-T P − v − T surfaces, anchored by the triple point ( 0.01 ∘ C , 0.6117 kPa 0.01^{\circ}\text{C}, 0.6117\text{ kPa} 0.0 1 ∘ C , 0.6117 kPa ) and critical point ( 373.95 ∘ C , 22.064 MPa 373.95^{\circ}\text{C}, 22.064\text{ MPa} 373.9 5 ∘ C , 22.064 MPa for water), with wet vapor enthalpy given by h = h f + x h f g h = h_f + x h_{fg} h = h f ​ + x h f g ​ .

Last updated: August 2026

11.2 Entropy, Availability, Exergy & Properties of Pure Substances

In thermal power engineering and mining utility analysis, understanding how energy degrades due to irreversibilities is critical. While the First Law tracks energy quantity, Entropy and Exergy evaluate energy quality, degradation, and maximum useful work output.

  • 1. Clausius Inequality & Definition of Entropy
  • The Clausius Inequality

For any thermodynamic cycle, whether reversible or irreversible, operating with thermal reservoirs: ∮ δ Q T ≤ 0 \oint \frac{\delta Q}{T} \le 0 ∮ T δ Q ​ ≤ 0

∮ δ Q T = 0 \oint \frac{\delta Q}{T} = 0 ∮ T δ Q ​ = 0 : The cycle is internally reversible .

∮ δ Q T < 0 \oint \frac{\delta Q}{T} < 0 ∮ T δ Q ​ < 0 : The cycle is irreversible (real-world process with friction, throttling, or unrestrained expansion).

∮ δ Q T > 0 \oint \frac{\delta Q}{T} > 0 ∮ T δ Q ​ > 0 : The cycle is impossible (violates the Second Law). CLAUSIUS CYCLE INTEGRAL CRITERIA

  • /-----------------------\
  • | oint (dQ / T) <= 0 |
  • \-----------------------/
  • |
  • +-----------------------+-----------------------+
  • | |
  • v v
  • oint (dQ/T) = 0 oint (dQ/T) < 0
  • Reversible Engine Cycle Irreversible Engine Cycle
  • (Carnot Ideal Limit) (Real Thermal Machines)
  • Mathematical Definition of Entropy

Because the cyclic integral of ( δ Q T ) r e v \left(\frac{\delta Q}{T}\right)_{rev} ( T δ Q ​ ) re v ​ is identically zero for all reversible paths, it represents an exact differential of a state property called Entropy ( S S S ) : d S = ( δ Q T ) r e v dS = \left(\frac{\delta Q}{T}\right)_{rev} d S = ( T δ Q ​ ) re v ​

For any real (irreversible) process between states 1 and 2: d S ≥ δ Q T ⟹ d S = δ Q T + δ S g e n dS \ge \frac{\delta Q}{T} \implies dS = \frac{\delta Q}{T} + \delta S_{gen} d S ≥ T δ Q ​ ⟹ d S = T δ Q ​ + δ S g e n ​

Where δ S g e n \delta S_{gen} δ S g e n ​ is the entropy generation within system boundaries:

δ S g e n > 0 \delta S_{gen} > 0 δ S g e n ​ > 0 for irreversible processes.

δ S g e n = 0 \delta S_{gen} = 0 δ S g e n ​ = 0 for reversible processes.

δ S g e n < 0 \delta S_{gen} < 0 δ S g e n ​ < 0 is thermodynamically impossible.

Principle of Increase of Entropy

For an isolated system that exchanges neither mass nor heat with surroundings ( δ Q = 0 \delta Q = 0 δ Q = 0 ): Δ S i s o l a t e d ≥ 0 \Delta S_{isolated} \ge 0 Δ S i so l a t e d ​ ≥ 0

Considering the system and its surroundings collectively as an isolated universe: Δ S u n i v e r s e = Δ S s y s t e m + Δ S s u r r o u n d i n g s = S g e n ≥ 0 \Delta S_{universe} = \Delta S_{system} + \Delta S_{surroundings} = S_{gen} \ge 0 Δ S u ni v erse ​ = Δ S sys t e m ​ + Δ S s u rro u n d in g s ​ = S g e n ​ ≥ 0

2. Gibbs T d s T\,ds T d s Equations & Entropy Changes for Ideal Gases

From the First Law ( δ Q = d u + P d v \delta Q = du + P\,dv δ Q = d u + P d v ) and definition of entropy ( T d s = δ Q r e v T\,ds = \delta Q_{rev} T d s = δ Q re v ​ ): T d s = d u + P d v (First T d s equation) T \, ds = du + P \, dv \qquad \text{(First } T\,ds \text{ equation)} T d s = d u + P d v (First T d s equation)

Using h = u + P v ⟹ d h = d u + P d v + v d P h = u + Pv \implies dh = du + P\,dv + v\,dP h = u + P v ⟹ d h = d u + P d v + v d P , substituting d u + P d v = d h − v d P du + P\,dv = dh - v\,dP d u + P d v = d h − v d P : T d s = d h − v d P (Second T d s equation) T \, ds = dh - v \, dP \qquad \text{(Second } T\,ds \text{ equation)} T d s = d h − v d P (Second T d s equation)

Entropy Change Formulas for Ideal Gases ( P v = R T , d u = c v d T , d h = c p d T P v = R T, du = c_v dT, dh = c_p dT P v = RT , d u = c v ​ d T , d h = c p ​ d T ) Δ s = s 2 − s 1 = c v ln ⁡ ( T 2 T 1 ) + R ln ⁡ ( v 2 v 1 ) \Delta s = s_2 - s_1 = c_v \ln\left(\frac{T_2}{T_1}\right) + R \ln\left(\frac{v_2}{v_1}\right) Δ s = s 2 ​ − s 1 ​ = c v ​ ln ( T 1 ​ T 2 ​ ​ ) + R ln ( v 1 ​ v 2 ​ ​ ) Δ s = s 2 − s 1 = c p ln ⁡ ( T 2 T 1 ) − R ln ⁡ ( P 2 P 1 ) \Delta s = s_2 - s_1 = c_p \ln\left(\frac{T_2}{T_1}\right) - R \ln\left(\frac{P_2}{P_1}\right) Δ s = s 2 ​ − s 1 ​ = c p ​ ln ( T 1 ​ T 2 ​ ​ ) − R ln ( P 1 ​ P 2 ​ ​ ) Δ s = s 2 − s 1 = c v ln ⁡ ( P 2 P 1 ) + c p ln ⁡ ( v 2 v 1 ) \Delta s = s_2 - s_1 = c_v \ln\left(\frac{P_2}{P_1}\right) + c_p \ln\left(\frac{v_2}{v_1}\right) Δ s = s 2 ​ − s 1 ​ = c v ​ ln ( P 1 ​ P 2 ​ ​ ) + c p ​ ln ( v 1 ​ v 2 ​ ​ )

Special Case: For an isentropic process ( s 2 = s 1 , Δ s = 0 s_2 = s_1, \Delta s = 0 s 2 ​ = s 1 ​ , Δ s = 0 ): c p ln ⁡ ( T 2 T 1 ) = R ln ⁡ ( P 2 P 1 ) ⟹ T 2 T 1 = ( P 2 P 1 ) γ − 1 γ c_p \ln\left(\frac{T_2}{T_1}\right) = R \ln\left(\frac{P_2}{P_1}\right) \implies \frac{T_2}{T_1} = \left(\frac{P_2}{P_1}\right)^{\frac{\gamma - 1}{\gamma}} c p ​ ln ( T 1 ​ T 2 ​ ​ ) = R ln ( P 1 ​ P 2 ​ ​ ) ⟹ T 1 ​ T 2 ​ ​ = ( P 1 ​ P 2 ​ ​ ) γ γ − 1 ​

  • 3. Availability, Exergy & Irreversibility
  • Available vs. Unavailable Energy

When heat Q 1 Q_1 Q 1 ​ is transferred from a high-temperature reservoir at T 1 T_1 T 1 ​ to an engine rejecting heat to ambient surroundings at T 0 T_0 T 0 ​ :

Available Energy ( A E AE A E ): Maximum theoretical work output = W m a x = Q 1 ( 1 − T 0 T 1 ) = W_{max} = Q_1 \left(1 - \frac{T_0}{T_1}\right) = W ma x ​ = Q 1 ​ ( 1 − T 1 ​ T 0 ​ ​ ) .

Unavailable Energy ( U A E UAE U A E ): Minimum heat rejected to environment = Q 1 − A E = T 0 Δ S = Q_1 - AE = T_0 \Delta S = Q 1 ​ − A E = T 0 ​ Δ S . TOTAL HEAT SUPPLIED (Q_1)

  • +---------------------------------------+-----------------------------+
  • | Available Energy (AE) | Unavailable Energy (UAE) |
  • | W_max = Q_1 * (1 - T_0 / T_1) | UAE = T_0 * Delta S |
  • +---------------------------------------+-----------------------------+
  • Exergy Formulations

Exergy is the maximum theoretical useful work obtainable as a system comes into complete mechanical, thermal, and chemical equilibrium with the reference environment (the dead state : P 0 = 101.325 kPa , T 0 = 298.15 K , V 0 , U 0 , S 0 P_0 = 101.325\text{ kPa}, T_0 = 298.15\text{ K}, V_0, U_0, S_0 P 0 ​ = 101.325 kPa , T 0 ​ = 298.15 K , V 0 ​ , U 0 ​ , S 0 ​ ).

Closed System (Non-Flow) Exergy ( Φ \Phi Φ ): Φ = ( U − U 0 ) + P 0 ( V − V 0 ) − T 0 ( S − S 0 ) \Phi = (U - U_0) + P_0(V - V_0) - T_0(S - S_0) Φ = ( U − U 0 ​ ) + P 0 ​ ( V − V 0 ​ ) − T 0 ​ ( S − S 0 ​ ) Specific: ϕ = ( u − u 0 ) + P 0 ( v − v 0 ) − T 0 ( s − s 0 ) \text{Specific: } \phi = (u - u_0) + P_0(v - v_0) - T_0(s - s_0) Specific: ϕ = ( u − u 0 ​ ) + P 0 ​ ( v − v 0 ​ ) − T 0 ​ ( s − s 0 ​ )

Open System (Flow) Exergy / Stream Availability ( ψ \psi ψ ): ψ = ( h − h 0 ) − T 0 ( s − s 0 ) + V 2 2000 + g z 1000 \psi = (h - h_0) - T_0(s - s_0) + \frac{V^2}{2000} + \frac{g z}{1000} ψ = ( h − h 0 ​ ) − T 0 ​ ( s − s 0 ​ ) + 2000 V 2 ​ + 1000 g z ​

Gouy-Stodola Theorem & Irreversibility ( I I I )

The rate of exergy destruction (irreversibility or lost work) is directly proportional to the total entropy generation rate of the universe: I = W r e v − W a c t u a l = T 0 ⋅ S g e n = T 0 ⋅ Δ S u n i v e r s e I = W_{rev} - W_{actual} = T_0 \cdot S_{gen} = T_0 \cdot \Delta S_{universe} I = W re v ​ − W a c t u a l ​ = T 0 ​ ⋅ S g e n ​ = T 0 ​ ⋅ Δ S u ni v erse ​

Second Law Efficiency ( η I I \eta_{II} η II ​ )

Unlike First Law thermal efficiency (which measures energy quantity conversion), Second Law efficiency measures performance relative to the theoretical reversible ideal: η I I = Exergy Recovered / Output Exergy Supplied / Input = W a c t u a l W r e v e r s i b l e = η t h η C a r n o t \eta_{II} = \frac{\text{Exergy Recovered / Output}}{\text{Exergy Supplied / Input}} = \frac{W_{actual}}{W_{reversible}} = \frac{\eta_{th}}{\eta_{Carnot}} η II ​ = Exergy Supplied / Input Exergy Recovered / Output ​ = W re v ers ib l e ​ W a c t u a l ​ ​ = η C a r n o t ​ η t h ​ ​

4. Properties of Pure Substances & Phase Diagrams

A pure substance is homogeneous and chemically invariable throughout (e.g., water/steam, nitrogen, gaseous combustion products in single phase). TEMPERATURE-ENTROPY (T-s) STEAM DOME

  • T ^
  • | Critical Point (CP)
  • | /\
  • | Saturated / \ Saturated
  • | Liquid Line / \ Vapour Line
  • | (x = 0) / Wet \ (x = 1)
  • | / Region \
  • | Compressed / (x) \ Superheated
  • | Liquid / \ Vapour
  • | / \
  • +----------------+----------------+----------------> s
  • Key Reference Points for Pure Water

Triple Point: All three phases (ice, liquid water, steam) coexist in thermodynamic equilibrium.

T t p = 0.01 ∘ C = 273.16 K T_{tp} = 0.01^{\circ}\text{C} = 273.16\text{ K} T tp ​ = 0.0 1 ∘ C = 273.16 K

P t p = 0.6117 kPa = 0.006117 bar = 4.587 mm Hg P_{tp} = 0.6117\text{ kPa} = 0.006117\text{ bar} = 4.587\text{ mm Hg} P tp ​ = 0.6117 kPa = 0.006117 bar = 4.587 mm Hg

Degrees of freedom ( F F F ) by Gibbs Phase Rule ( F = C − P + 2 = 1 − 3 + 2 = 0 F = C - P + 2 = 1 - 3 + 2 = 0 F = C − P + 2 = 1 − 3 + 2 = 0 ).

Critical Point: Meniscus between liquid and vapor disappears; latent heat of vaporization h f g = 0 h_{fg} = 0 h f g ​ = 0 .

P c r = 22.064 MPa = 220.64 bar P_{cr} = 22.064\text{ MPa} = 220.64\text{ bar} P cr ​ = 22.064 MPa = 220.64 bar

T c r = 373.95 ∘ C = 647.10 K T_{cr} = 373.95^{\circ}\text{C} = 647.10\text{ K} T cr ​ = 373.9 5 ∘ C = 647.10 K

  • Specific volume v c r = 0.003155 m 3 / kg v_{cr} = 0.003155\text{ m}^3/\text{kg} v cr ​ = 0.003155 m 3 / kg
  • 5. Dryness Fraction (Steam Quality) & Property Formulations

In the two-phase wet mixture region: Dryness Fraction (Quality) x = m v m v + m l = m v m t o t a l ( 0 ≤ x ≤ 1 ) \text{Dryness Fraction (Quality) } x = \frac{m_v}{m_v + m_l} = \frac{m_v}{m_{total}} \qquad (0 \le x \le 1) Dryness Fraction (Quality) x = m v ​ + m l ​ m v ​ ​ = m t o t a l ​ m v ​ ​ ( 0 ≤ x ≤ 1 )

x = 0 x = 0 x = 0 : Saturated liquid state (subscript f f f ).

x = 1 x = 1 x = 1 : Saturated dry vapour state (subscript g g g ).

Thermodynamic Relations for Wet Steam (Given x x x at P s a t , T s a t P_{sat}, T_{sat} P s a t ​ , T s a t ​ )

Property Wet Region Formula High Pressure Approximation

Specific Volume ( v v v ) v = v f + x ( v g − v f ) = v f + x v f g v = v_f + x(v_g - v_f) = v_f + x v_{fg} v = v f ​ + x ( v g ​ − v f ​ ) = v f ​ + x v f g ​ v ≈ x v g v \approx x v_g v ≈ x v g ​ (since v g ≫ v f v_g \gg v_f v g ​ ≫ v f ​ )

Specific Internal Energy ( u u u ) u = u f + x ( u g − u f ) = u f + x u f g u = u_f + x(u_g - u_f) = u_f + x u_{fg} u = u f ​ + x ( u g ​ − u f ​ ) = u f ​ + x u f g ​ u = u f + x u f g u = u_f + x u_{fg} u = u f ​ + x u f g ​

Specific Enthalpy ( h h h ) h = h f + x ( h g − h f ) = h f + x h f g h = h_f + x(h_g - h_f) = h_f + x h_{fg} h = h f ​ + x ( h g ​ − h f ​ ) = h f ​ + x h f g ​ h = h f + x h f g h = h_f + x h_{fg} h = h f ​ + x h f g ​

Specific Entropy ( s s s ) s = s f + x ( s g − s f ) = s f + x s f g s = s_f + x(s_g - s_f) = s_f + x s_{fg} s = s f ​ + x ( s g ​ − s f ​ ) = s f ​ + x s f g ​ s = s f + x ( h f g T s a t ) s = s_f + x \left(\frac{h_{fg}}{T_{sat}}\right) s = s f ​ + x ( T s a t ​ h f g ​ ​ )

Superheated Steam Formulations ( T s u p > T s a t T_{sup} > T_{sat} T s u p ​ > T s a t ​ ) h = h g + c p v ( T s u p − T s a t ) h = h_g + c_{pv} (T_{sup} - T_{sat}) h = h g ​ + c p v ​ ( T s u p ​ − T s a t ​ ) s = s g + c p v ln ⁡ ( T s u p T s a t ) s = s_g + c_{pv} \ln\left(\frac{T_{sup}}{T_{sat}}\right) s = s g ​ + c p v ​ ln ( T s a t ​ T s u p ​ ​ )

(Where c p v ≈ 2.1 kJ/kg ⋅ K c_{pv} \approx 2.1\text{ kJ/kg}\cdot\text{K} c p v ​ ≈ 2.1 kJ/kg ⋅ K is the average specific heat of superheated steam).

  • 6. Measurement of Steam Dryness Fraction (Calorimeters) CALORIMETER COMPARISON
  • +--------------------------------+----------------------------------------+
  • | Calorimeter Type | Working Principle & Measurement Range |
  • +--------------------------------+----------------------------------------+
  • | Barrel / Tank Calorimeter | Direct water mass condensation & heat |
  • | | balance; prone to radiation loss. |
  • +--------------------------------+----------------------------------------+
  • | Separating Calorimeter | Mechanical separation of moisture |
  • | | droplets by inertia; good for very wet |
  • | | steam ($x < 0.85$). |
  • +--------------------------------+----------------------------------------+
  • | Throttling Calorimeter | Isenthalpic throttling ($h_1 = h_2$) |
  • | | into superheated region; requires |
  • | | $x > 0.95$ and superheated exit state. |
  • +--------------------------------+----------------------------------------+
  • | Combined Separating & | Separating stage catches bulk water |
  • | Throttling Calorimeter | ($x_1$), throttling stage measures dry |
  • | | fraction ($x_2$); $x = x_1 \cdot x_2$. |
  • +--------------------------------+----------------------------------------+

Governing Equation for Throttling Calorimeter h 1 = h 2 ⟹ h f 1 + x 1 h f g 1 = h g 2 + c p v ( T s u p 2 − T s a t 2 ) h_1 = h_2 \implies h_{f1} + x_1 h_{fg1} = h_{g2} + c_{pv}(T_{sup2} - T_{sat2}) h 1 ​ = h 2 ​ ⟹ h f 1 ​ + x 1 ​ h f g 1 ​ = h g 2 ​ + c p v ​ ( T s u p 2 ​ − T s a t 2 ​ ) x 1 = h g 2 + c p v ( T s u p 2 − T s a t 2 ) − h f 1 h f g 1 x_1 = \frac{h_{g2} + c_{pv}(T_{sup2} - T_{sat2}) - h_{f1}}{h_{fg1}} x 1 ​ = h f g 1 ​ h g 2 ​ + c p v ​ ( T s u p 2 ​ − T s a t 2 ​ ) − h f 1 ​ ​

  • 7. Worked Numerical Examples
  • Example 1: Entropy Generation in Heat Exchanger

Problem: In a counter-flow steam condenser, 20 kg/s 20\text{ kg/s} 20 kg/s of exhaust steam condenses isothermally at T s a t = 50 ∘ C T_{sat} = 50^{\circ}\text{C} T s a t ​ = 5 0 ∘ C ( 323.15 K 323.15\text{ K} 323.15 K ), releasing 2380 kJ/kg 2380\text{ kJ/kg} 2380 kJ/kg of latent heat. Cooling water enters at 20 ∘ C 20^{\circ}\text{C} 2 0 ∘ C ( 293.15 K 293.15\text{ K} 293.15 K ) and leaves at 35 ∘ C 35^{\circ}\text{C} 3 5 ∘ C ( 308.15 K 308.15\text{ K} 308.15 K ). Assume specific heat of water c p = 4.184 kJ/kg ⋅ K c_p = 4.184\text{ kJ/kg}\cdot\text{K} c p ​ = 4.184 kJ/kg ⋅ K . Calculate the rate of entropy generation ( S ˙ g e n \dot{S}_{gen} S ˙ g e n ​ ).

Solution:

Rate of heat rejection by steam: Q ˙ = m ˙ s × h f g = 20 × 2380 = 47600 kW \dot{Q} = \dot{m}_s \times h_{fg} = 20 \times 2380 = 47600\text{ kW} Q ˙ ​ = m ˙ s ​ × h f g ​ = 20 × 2380 = 47600 kW

Rate of entropy change of steam: Δ S ˙ s t e a m = − Q ˙ T s a t = − 47600 323.15 = − 147.30 kW/K \Delta \dot{S}_{steam} = \frac{-\dot{Q}}{T_{sat}} = \frac{-47600}{323.15} = -147.30\text{ kW/K} Δ S ˙ s t e am ​ = T s a t ​ − Q ˙ ​ ​ = 323.15 − 47600 ​ = − 147.30 kW/K

Cooling water mass flow rate ( m ˙ w \dot{m}_w m ˙ w ​ ): m ˙ w = Q ˙ c p ( T w 2 − T w 1 ) = 47600 4.184 × ( 35 − 20 ) = 47600 62.76 = 758.44 kg/s \dot{m}_w = \frac{\dot{Q}}{c_p (T_{w2} - T_{w1})} = \frac{47600}{4.184 \times (35 - 20)} = \frac{47600}{62.76} = 758.44\text{ kg/s} m ˙ w ​ = c p ​ ( T w 2 ​ − T w 1 ​ ) Q ˙ ​ ​ = 4.184 × ( 35 − 20 ) 47600 ​ = 62.76 47600 ​ = 758.44 kg/s

Rate of entropy change of cooling water: Δ S ˙ w a t e r = m ˙ w c p ln ⁡ ( T w 2 T w 1 ) = 758.44 × 4.184 × ln ⁡ ( 308.15 293.15 ) \Delta \dot{S}_{water} = \dot{m}_w c_p \ln\left(\frac{T_{w2}}{T_{w1}}\right) = 758.44 \times 4.184 \times \ln\left(\frac{308.15}{293.15}\right) Δ S ˙ w a t er ​ = m ˙ w ​ c p ​ ln ( T w 1 ​ T w 2 ​ ​ ) = 758.44 × 4.184 × ln ( 293.15 308.15 ​ ) Δ S ˙ w a t e r = 3173.32 × ln ⁡ ( 1.05117 ) = 3173.32 × 0.04989 = + 158.32 kW/K \Delta \dot{S}_{water} = 3173.32 \times \ln(1.05117) = 3173.32 \times 0.04989 = +158.32\text{ kW/K} Δ S ˙ w a t er ​ = 3173.32 × ln ( 1.05117 ) = 3173.32 × 0.04989 = + 158.32 kW/K

Total entropy generation rate: S ˙ g e n = Δ S ˙ s t e a m + Δ S ˙ w a t e r = − 147.30 + 158.32 = + 11.02 kW/K \dot{S}_{gen} = \Delta \dot{S}_{steam} + \Delta \dot{S}_{water} = -147.30 + 158.32 = +11.02\text{ kW/K} S ˙ g e n ​ = Δ S ˙ s t e am ​ + Δ S ˙ w a t er ​ = − 147.30 + 158.32 = + 11.02 kW/K

Example 2: Stream Flow Exergy & Turbine Work

Problem: Steam enters an adiabatic turbine at P 1 = 3 MPa , T 1 = 400 ∘ C P_1 = 3\text{ MPa}, T_1 = 400^{\circ}\text{C} P 1 ​ = 3 MPa , T 1 ​ = 40 0 ∘ C ( h 1 = 3231.7 kJ/kg , s 1 = 6.9235 kJ/kg ⋅ K h_1 = 3231.7\text{ kJ/kg}, s_1 = 6.9235\text{ kJ/kg}\cdot\text{K} h 1 ​ = 3231.7 kJ/kg , s 1 ​ = 6.9235 kJ/kg ⋅ K ) and exits at P 2 = 10 kPa P_2 = 10\text{ kPa} P 2 ​ = 10 kPa with quality x 2 = 0.90 x_2 = 0.90 x 2 ​ = 0.90 ( h 2 = 2344.7 kJ/kg , s 2 = 7.4002 kJ/kg ⋅ K h_2 = 2344.7\text{ kJ/kg}, s_2 = 7.4002\text{ kJ/kg}\cdot\text{K} h 2 ​ = 2344.7 kJ/kg , s 2 ​ = 7.4002 kJ/kg ⋅ K ). The ambient temperature is T 0 = 25 ∘ C = 298.15 K T_0 = 25^{\circ}\text{C} = 298.15\text{ K} T 0 ​ = 2 5 ∘ C = 298.15 K . Calculate:

Actual turbine work output per kg ( w a c t w_{act} w a c t ​ ).

Maximum reversible work per kg ( w r e v w_{rev} w re v ​ ).

Exergy destroyed per kg ( i i i ).

Solution:

Actual work output: w a c t = h 1 − h 2 = 3231.7 − 2344.7 = 887.0 kJ/kg w_{act} = h_1 - h_2 = 3231.7 - 2344.7 = 887.0\text{ kJ/kg} w a c t ​ = h 1 ​ − h 2 ​ = 3231.7 − 2344.7 = 887.0 kJ/kg

Reversible work output ( w r e v = ψ 1 − ψ 2 w_{rev} = \psi_1 - \psi_2 w re v ​ = ψ 1 ​ − ψ 2 ​ ): w r e v = ( h 1 − h 2 ) − T 0 ( s 1 − s 2 ) = 887.0 − 298.15 × ( 6.9235 − 7.4002 ) w_{rev} = (h_1 - h_2) - T_0(s_1 - s_2) = 887.0 - 298.15 \times (6.9235 - 7.4002) w re v ​ = ( h 1 ​ − h 2 ​ ) − T 0 ​ ( s 1 ​ − s 2 ​ ) = 887.0 − 298.15 × ( 6.9235 − 7.4002 ) w r e v = 887.0 − 298.15 × ( − 0.4767 ) = 887.0 + 142.13 = 1029.13 kJ/kg w_{rev} = 887.0 - 298.15 \times (-0.4767) = 887.0 + 142.13 = 1029.13\text{ kJ/kg} w re v ​ = 887.0 − 298.15 × ( − 0.4767 ) = 887.0 + 142.13 = 1029.13 kJ/kg

Exergy destroyed (Irreversibility): i = w r e v − w a c t = 1029.13 − 887.0 = 142.13 kJ/kg i = w_{rev} - w_{act} = 1029.13 - 887.0 = 142.13\text{ kJ/kg} i = w re v ​ − w a c t ​ = 1029.13 − 887.0 = 142.13 kJ/kg

Direct Verification via Gouy-Stodola: i = T 0 s g e n = 298.15 × ( 7.4002 − 6.9235 ) = 142.13 kJ/kg i = T_0 s_{gen} = 298.15 \times (7.4002 - 6.9235) = 142.13\text{ kJ/kg} i = T 0 ​ s g e n ​ = 298.15 × ( 7.4002 − 6.9235 ) = 142.13 kJ/kg .