Study guide
12.3 Air-Standard Gas Power Cycles: Otto, Diesel, Dual & Brayton
Coal India Management Trainee CIL MT
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: CIL MT Exam Overview & Coal Sector Landscape
1.1 CIL MT Exam Pattern, Marking Scheme & Strategy 1.2 Coal India Limited: Corporate Structure, Maharatna Status & Subsidiaries 1.3 Indian Coal Mining Sector, Energy Mix & Environmental Regulations
2 Chapter 2: Paper-I General Awareness, Polity & Current Affairs
2.1 Indian Constitution, Governance & Statutory Bodies 2.2 Indian Economy, Union Budget & Economic Planning 2.3 Indian Geography, Mineral Belts & Environmental Ecology 2.4 Modern Indian History, Freedom Struggle & Cultural Heritage 2.5 General Science: Physics, Chemistry & Biology Fundamentals 2.6 Inventions, Discoveries & Scientific-Technological Development 2.7 Uses of Internet, Computer Awareness & Digital Governance 2.8 National & International Organisations 2.9 Awards, Honours & Sports 2.10 Books & Authors, Important Monuments & Places of India 2.11 Ports, Power Plants & Infrastructure of India 2.12 Climate Change, SDGs, National Parks & Wildlife Sanctuaries 2.13 Flagship Government Programmes & Current Affairs Method 2.14 World Physical, Social & Economic Geography
3 Chapter 3: Paper-I Reasoning & Logical Ability
3.1 Series Completion, Coding-Decoding & Semantic Analogies 3.2 Syllogisms, Logical Deduction & Venn Diagrams 3.3 Seating Arrangements, Linear/Circular Alignments & Puzzles 3.4 Direction Sense, Blood Relations & Order/Ranking 3.5 Alphabetical & Alphanumeric Series 3.6 Statement & Conclusions, Statement & Arguments 3.7 Clocks & Calendars 3.8 Cubes, Dice & Figure Counting 3.9 Mirror Images, Water Images, Embedded Figures & Non-Verbal Series 3.10 Decision Making & Data Analysis in Reasoning
4 Chapter 4: Paper-I Numerical Ability & Quantitative Aptitude
4.1 Arithmetic Foundations: Percentages, Profit & Loss, Ratio & Proportion 4.2 Averages, Simple/Compound Interest, Alligations & Mixtures 4.3 Time & Work, Pipes & Cisterns, Time, Speed & Distance 4.4 Algebra, Mensuration, Geometry & Data Interpretation (DI) 4.5 Number System, LCM, HCF & Decimal Fractions 4.6 Surds, Indices & Simplification 4.7 Problems on Ages 4.8 Boats & Streams and Problems on Trains 4.9 Permutations & Combinations 4.10 Probability for Quantitative Aptitude
5 Chapter 5: Paper-I General English & Verbal Ability
5.1 English Grammar, Error Spotting & Sentence Correction 5.2 Vocabulary Building: Synonyms, Antonyms, Idioms & Phrases 5.3 Reading Comprehension, Cloze Tests & Para Jumbles 5.4 Fill in the Blanks, Cloze Passages & Sentence Completion 5.5 Jumbled Sentences & Sentence Improvement
6 Chapter 6: Paper-II Engineering Mathematics
6.1 Matrix Algebra, Rank & Systems of Linear Equations 6.2 Eigenvalues, Eigenvectors & the Cayley-Hamilton Theorem 6.3 Limits, Continuity, Differentiability & Mean Value Theorems 6.4 Maxima-Minima, Indeterminate Forms & Taylor Series 6.5 Definite, Improper, Double & Triple Integrals 6.6 Partial Derivatives, Total Derivative & Multivariable Optimisation 6.7 First-Order Differential Equations: Linear & Non-Linear 6.8 Higher-Order Linear Differential Equations & Engineering Applications 6.9 Laplace Transforms & Transfer-Function Methods 6.10 Probability, Conditional Probability & Bayes' Theorem 6.11 Random Variables, Distributions & Descriptive Statistics 6.12 Numerical Methods: Root Finding, Integration & ODE Solvers
7 Chapter 7: Paper-II Engineering Mechanics & Statics-Dynamics
7.1 Force Systems, Coplanar Equilibrium & Lami's Theorem 7.2 Plane Trusses, Friction Mechanics & Screws/Wedges 7.3 Centroids, Center of Gravity & Moment of Inertia 7.4 Kinematics, Kinetics of Particles & Rigid Body Dynamics 7.5 Virtual Work & Lagrange's Equation 7.6 Rolling Friction, Belt-Pulley Drives, Brakes, Clutches & Vehicle Dynamics
8 Chapter 8: Paper-II Mechanics of Materials & Structural Integrity
8.1 Simple Stresses, Strains, Elastic Moduli & Thermal Stresses 8.2 Principal Stresses, Strain Energy & Mohr's Circle 8.3 Shear Force & Bending Moment Diagrams, Beam Bending & Shear Stresses 8.4 Torsion of Circular Shafts, Springs & Column Buckling 8.5 Thin Cylinders, Spheres & Thick-Walled Pressure Vessels 8.6 Deflection of Beams: Double Integration, Macaulay & Moment-Area 8.7 Shear Centre & Unsymmetrical Bending 8.8 Strain Gauges, Rosettes & Experimental Stress Analysis 8.9 Mechanical Testing: Universal Testing Machine, Hardness & Impact
9 Chapter 9: Paper-II Theory of Machines & Mechanical Vibrations
9.1 Simple Mechanisms, Kinematic Inversions & Velocity/Acceleration Diagrams 9.2 Cams & Followers, Toothed Gearing & Epicyclic Gear Trains 9.3 Flywheels, Centrifugal/Inertia Governors & Rotor Balancing 9.4 Free, Damped & Forced Single-Degree-of-Freedom Vibrations 9.5 Gyroscopic Couple & Gyroscopic Effects
10 Chapter 10: Paper-II Machine Design & Failure Theories
10.1 Static Failure Theories & Variable/Fatigue Loading 10.2 Design of Threaded Fasteners, Welded & Riveted Joints 10.3 Design of Shafts, Keys, Couplings & Rolling/Sliding Bearings 10.4 Design of Spur, Helical, Bevel & Worm Gears 10.5 Design of Helical, Leaf & Torsion Springs 10.6 Design of Brakes & Clutches: Energy, Lining Pressure & Heat
11 Chapter 11: Paper-II Fluid Mechanics & Hydraulic Machinery
11.1 Fluid Properties, Hydrostatic Forces & Buoyancy 11.2 Fluid Kinematics, Continuity & Bernoulli's Equation 11.3 Viscous Flow in Pipes, Boundary Layer & Minor Losses 11.4 Hydraulic Turbines, Centrifugal & Reciprocating Pumps 11.5 Dimensional Analysis, Similitude & Model Testing 11.6 Control-Volume Analysis: Continuity, Momentum & Energy
12 Chapter 12: Paper-II Thermodynamics, Thermal Cycles & Turbomachinery
12.1 Fundamental Concepts, First & Second Laws of Thermodynamics 12.2 Entropy, Availability, Exergy & Properties of Pure Substances 12.3 Air-Standard Gas Power Cycles: Otto, Diesel, Dual & Brayton 12.4 Vapour Power Cycles: Ideal, Reheat & Regenerative Rankine Cycles 12.5 Thermodynamic Relations: Maxwell, Clausius-Clapeyron & Joule-Thomson 12.6 Behaviour of Ideal & Real Gases and Equations of State 12.7 Air & Gas Compressors: Reciprocating, Rotary & Multi-Stage 12.8 Steam & Gas Turbines: Impulse, Reaction & Velocity Diagrams
13 Chapter 13: Paper-II Heat Transfer, Refrigeration & Air Conditioning
13.1 Steady & Unsteady Conduction, Extended Surfaces (Fins) 13.2 Forced/Natural Convection, Radiation & Heat Exchanger LMTD/NTU 13.3 Vapour Compression & Vapour Absorption Refrigeration Systems 13.4 Psychrometric Properties, Processes & Air Conditioning Systems 13.5 Gas Refrigeration, Heat Pump Cycles & Cryogenics
14 Chapter 14: Paper-II Materials Science, Metallurgy & Manufacturing Technology
14.1 Crystal Structures, Phase Diagrams & Iron-Iron Carbide Equilibrium 14.2 Heat Treatment Processes & Engineering Alloy Steels 14.3 Casting Processes, Metal Forming & Welding Metallurgy 14.4 Metal Cutting Mechanics, Tool Life & Machine Tools 14.5 Plastic Deformation, Yield Criteria & Load Estimation in Bulk Forming 14.6 Sheet Metal Forming: Shearing, Bending & Deep Drawing 14.7 Powder Metallurgy 14.8 Brazing, Soldering & Adhesive Bonding 14.9 Non-Traditional Machining: EDM, ECM, USM, AJM, LBM & EBM 14.10 Abrasive Machining, Grinding & Superfinishing 14.11 Principles of Work Holding, Jigs & Fixtures 14.12 Economics of Machining & Tool Life Optimisation
15 Chapter 15: Paper-II Metrology, Quality Control & Industrial Engineering / OR
15.1 Limits, Fits, Tolerances, Gauges & Surface Metrology 15.2 Production Planning, Forecasting & Inventory Control Models 15.3 Operations Research: Linear Programming & Transportation/Assignment 15.4 Project Management: CPM, PERT, Network Analysis & Crashing 15.5 Comparators & Interferometry 15.6 Coordinate Measuring Machines & Machine Tool Alignment Testing 15.7 Computer Integrated Manufacturing: CAD/CAM & Integration Tools 15.8 NC/CNC Machines & CNC Part Programming 15.9 Material Requirements Planning, Scheduling & Sequencing 15.10 Queuing Theory & Simple Queuing Models 15.11 Network Flow Models: Shortest Route, Maximal Flow & Spanning Tree
12.3 Air-Standard Gas Power Cycles: Otto, Diesel, Dual & Brayton
Key Takeaways Explain This Topic AI
Under air-standard idealizations, Otto cycle thermal efficiency η O t t o = 1 − 1 / r γ − 1 \eta_{Otto} = 1 - 1/r^{\gamma-1} η Ott o = 1 − 1/ r γ − 1 is purely a function of compression ratio r r r and specific heat ratio γ \gamma γ .
The Diesel cycle employs constant-pressure heat addition characterized by cut-off ratio r c r_c r c ; at identical compression ratios η O t t o > η D i e s e l \eta_{Otto} > \eta_{Diesel} η Ott o > η D i ese l , but Diesel engines achieve higher practical efficiencies due to larger operating compression ratios ( 14 − 22 14-22 14 − 22 ).
For identical peak cycle pressure and heat input, cycle thermal efficiencies rank as η D i e s e l > η D u a l > η O t t o \eta_{Diesel} > \eta_{Dual} > \eta_{Otto} η D i ese l > η D u a l > η Ott o .
The ideal Brayton gas turbine cycle achieves maximum specific net work output at the optimum pressure ratio r p , o p t = ( T m a x / T m i n ) γ / [ 2 ( γ − 1 ) ] r_{p,opt} = (T_{max}/T_{min})^{\gamma / [2(\gamma-1)]} r p , o pt = ( T ma x / T min ) γ / [ 2 ( γ − 1 )] .
Last updated: August 2026
11.3 Air-Standard Gas Power Cycles: Otto, Diesel, Dual & Brayton
Internal combustion engines and gas turbines provide essential prime mover power across mining excavation equipment, diesel-electric haul trucks, heavy dumpers, portable air compressors, and on-site emergency gas-turbine generator sets in Coal India complexes.
1. Air-Standard Assumptions
To perform analytical thermodynamic modeling of complex IC engines and gas turbines, standard idealizations ( Air-Standard Assumptions ) are applied:
The working fluid is a fixed mass of air that behaves continuously as an ideal gas with constant specific heats evaluated at room temperature ( c p = 1.005 kJ/kg ⋅ K c_p = 1.005\text{ kJ/kg}\cdot\text{K} c p = 1.005 kJ/kg ⋅ K , c v = 0.718 kJ/kg ⋅ K c_v = 0.718\text{ kJ/kg}\cdot\text{K} c v = 0.718 kJ/kg ⋅ K , γ = 1.4 \gamma = 1.4 γ = 1.4 , R = 0.287 kJ/kg ⋅ K R = 0.287\text{ kJ/kg}\cdot\text{K} R = 0.287 kJ/kg ⋅ K ).
All processes within the cycle are internally reversible .
The complex combustion process is replaced by an external heat addition process from a high-temperature source.
The exhaust blowdown and intake strokes are replaced by an external heat rejection process that restores the air to its initial state.
2. Air-Standard Otto Cycle (Constant Volume Heat Addition)
The idealized thermodynamic cycle for spark-ignition (petrol/gasoline) four-stroke and two-stroke reciprocating engines. OTTO CYCLE: P-v DIAGRAM OTTO CYCLE: T-s DIAGRAM
- P ^ T ^
- | 3 (Peak P, T) | 3
- | /| | / \
- | Q_in/ | | Q_in / \ Isentropic
- | / | | / \ Expansion
- | 2 | Isentropic | 2 4
- | | | Expansion | | |
- | | 4 | | Q_out | Q_out
- | | / | 1-------+
- | 1-+ +------------------------> s
- +----+---+------------------> v
- V_2 V_1
- Four Cycle Processes
Process 1-2: Reversible adiabatic (isentropic) compression: P 1 V 1 γ = P 2 V 2 γ P_1 V_1^{\gamma} = P_2 V_2^{\gamma} P 1 V 1 γ = P 2 V 2 γ .
Process 2-3: Constant-volume (isochoric) heat addition: Q i n = m c v ( T 3 − T 2 ) Q_{in} = m c_v (T_3 - T_2) Q in = m c v ( T 3 − T 2 ) .
Process 3-4: Reversible adiabatic (isentropic) expansion: P 3 V 3 γ = P 4 V 4 γ P_3 V_3^{\gamma} = P_4 V_4^{\gamma} P 3 V 3 γ = P 4 V 4 γ .
Process 4-1: Constant-volume (isochoric) heat rejection: Q o u t = m c v ( T 4 − T 1 ) Q_{out} = m c_v (T_4 - T_1) Q o u t = m c v ( T 4 − T 1 ) .
Geometric Parameters & Efficiency Derivation
Compression Ratio ( r r r ): r = V 1 V 2 = V d + V c V c r = \frac{V_1}{V_2} = \frac{V_d + V_c}{V_c} r = V 2 V 1 = V c V d + V c
(Where V d V_d V d = swept/displacement volume, V c V_c V c = clearance volume).
Thermal Efficiency ( η O t t o \eta_{Otto} η Ott o ): η O t t o = 1 − Q o u t Q i n = 1 − m c v ( T 4 − T 1 ) m c v ( T 3 − T 2 ) = 1 − T 1 ( T 4 / T 1 − 1 ) T 2 ( T 3 / T 2 − 1 ) \eta_{Otto} = 1 - \frac{Q_{out}}{Q_{in}} = 1 - \frac{m c_v (T_4 - T_1)}{m c_v (T_3 - T_2)} = 1 - \frac{T_1(T_4/T_1 - 1)}{T_2(T_3/T_2 - 1)} η Ott o = 1 − Q in Q o u t = 1 − m c v ( T 3 − T 2 ) m c v ( T 4 − T 1 ) = 1 − T 2 ( T 3 / T 2 − 1 ) T 1 ( T 4 / T 1 − 1 )
Since T 2 / T 1 = ( V 1 / V 2 ) γ − 1 = r γ − 1 T_2/T_1 = (V_1/V_2)^{\gamma-1} = r^{\gamma-1} T 2 / T 1 = ( V 1 / V 2 ) γ − 1 = r γ − 1 and T 3 / T 4 = ( V 4 / V 3 ) γ − 1 = r γ − 1 T_3/T_4 = (V_4/V_3)^{\gamma-1} = r^{\gamma-1} T 3 / T 4 = ( V 4 / V 3 ) γ − 1 = r γ − 1 : η O t t o = 1 − 1 r γ − 1 \eta_{Otto} = 1 - \frac{1}{r^{\gamma - 1}} η Ott o = 1 − r γ − 1 1
Key Insights: η O t t o \eta_{Otto} η Ott o increases with higher compression ratio r r r and higher specific heat ratio γ \gamma γ (monatomic gases like Argon have higher η \eta η than diatomic air). In practice, r r r is restricted to 6 − 10 6-10 6 − 10 to avoid knocking (auto-ignition detonation).
3. Air-Standard Diesel Cycle (Constant Pressure Heat Addition)
The idealized thermodynamic cycle for compression-ignition (diesel) reciprocating engines. DIESEL CYCLE: P-v DIAGRAM DIESEL CYCLE: T-s DIAGRAM
- P ^ T ^
- | 2 Q_in 3 | 3
- | *--------* (P = C) | / \
- | / \ | Q_in / \ Isentropic
- | / \ Isentropic | / \ Expansion
- | / \ Expansion | 2 4
- | 1 4 | | |
- | +----------------+ | 1-------+
- +--+---+------------+-------> v +------------------------> s
- V_2 V_3 V_1
- Four Cycle Processes
Process 1-2: Isentropic compression ( s 1 = s 2 s_1 = s_2 s 1 = s 2 ): T 2 = T 1 r γ − 1 T_2 = T_1 r^{\gamma-1} T 2 = T 1 r γ − 1 .
Process 2-3: Constant-pressure (isobaric) heat addition: Q i n = m c p ( T 3 − T 2 ) Q_{in} = m c_p (T_3 - T_2) Q in = m c p ( T 3 − T 2 ) .
Process 3-4: Isentropic expansion ( s 3 = s 4 s_3 = s_4 s 3 = s 4 ): T 4 = T 3 ( V 3 / V 4 ) γ − 1 T_4 = T_3 (V_3/V_4)^{\gamma-1} T 4 = T 3 ( V 3 / V 4 ) γ − 1 .
Process 4-1: Constant-volume (isochoric) heat rejection: Q o u t = m c v ( T 4 − T 1 ) Q_{out} = m c_v (T_4 - T_1) Q o u t = m c v ( T 4 − T 1 ) .
Governing Definitions & Thermal Efficiency
Cut-off Ratio ( r c r_c r c ): Ratio of cylinder volume after heat addition to before heat addition: r c = V 3 V 2 = T 3 T 2 r_c = \frac{V_3}{V_2} = \frac{T_3}{T_2} r c = V 2 V 3 = T 2 T 3
Expansion Ratio ( r e r_e r e ): r e = V 4 V 3 = V 1 V 3 = r r c r_e = \frac{V_4}{V_3} = \frac{V_1}{V_3} = \frac{r}{r_c} r e = V 3 V 4 = V 3 V 1 = r c r
Diesel Thermal Efficiency ( η D i e s e l \eta_{Diesel} η D i ese l ): η D i e s e l = 1 − Q o u t Q i n = 1 − m c v ( T 4 − T 1 ) m c p ( T 3 − T 2 ) = 1 − 1 r γ − 1 [ r c γ − 1 γ ( r c − 1 ) ] \eta_{Diesel} = 1 - \frac{Q_{out}}{Q_{in}} = 1 - \frac{m c_v (T_4 - T_1)}{m c_p (T_3 - T_2)} = 1 - \frac{1}{r^{\gamma - 1}} \left[ \frac{r_c^{\gamma} - 1}{\gamma(r_c - 1)} \right] η D i ese l = 1 − Q in Q o u t = 1 − m c p ( T 3 − T 2 ) m c v ( T 4 − T 1 ) = 1 − r γ − 1 1 [ γ ( r c − 1 ) r c γ − 1 ]
Critical Note: Since r c γ − 1 γ ( r c − 1 ) > 1 \frac{r_c^{\gamma} - 1}{\gamma(r_c - 1)} > 1 γ ( r c − 1 ) r c γ − 1 > 1 for all r c > 1 r_c > 1 r c > 1 , the Diesel cycle efficiency is lower than the Otto cycle at the same compression ratio. However, because diesel engines compress pure air (no fuel during compression), they operate at much higher compression ratios ( r = 14 − 22 r = 14-22 r = 14 − 22 ) without knocking, resulting in higher actual operational efficiency.
4. Dual Combustion Cycle (Sabathe / Limited Pressure Cycle)
In modern high-speed diesel and heavy haul truck engines, fuel injection begins before TDC, causing heat addition to occur partly at constant volume and partly at constant pressure.
Pressure Ratio (Explosion Ratio, r p r_p r p or α \alpha α ): r p = P 3 P 2 r_p = \frac{P_3}{P_2} r p = P 2 P 3
Cut-off Ratio ( r c r_c r c ): r c = V 4 V 3 r_c = \frac{V_4}{V_3} r c = V 3 V 4 η D u a l = 1 − 1 r γ − 1 [ r p r c γ − 1 ( r p − 1 ) + γ r p ( r c − 1 ) ] \eta_{Dual} = 1 - \frac{1}{r^{\gamma - 1}} \left[ \frac{r_p r_c^{\gamma} - 1}{(r_p - 1) + \gamma r_p (r_c - 1)} \right] η D u a l = 1 − r γ − 1 1 [ ( r p − 1 ) + γ r p ( r c − 1 ) r p r c γ − 1 ]
When r c = 1 ⟹ r_c = 1 \implies r c = 1 ⟹ Otto cycle equation.
When r p = 1 ⟹ r_p = 1 \implies r p = 1 ⟹ Diesel cycle equation.
5. Comparative Performance Analysis of Gas Power Cycles +-------------------------------------------------------------------------+
- | CYCLE EFFICIENCY COMPARISONS SUMMARY |
- +------------------------------------+------------------------------------+
- | Comparison Condition | Efficiency Ranking |
- +------------------------------------+------------------------------------+
- | Same Compression Ratio ($r$) and | $\eta_{Otto} > \eta_{Dual} > |
- | Same Heat Input ($Q_{in}$) | \eta_{Diesel}$ |
- +------------------------------------+------------------------------------+
- | Same Maximum Peak Pressure | $\eta_{Diesel} > \eta_{Dual} > |
- | ($P_{max}$) & Same Heat Input | \eta_{Otto}$ |
- +------------------------------------+------------------------------------+
- | Same Maximum Peak Pressure | $\eta_{Diesel} > \eta_{Dual} > |
- | ($P_{max}$) & Maximum Temp ($T_{max}$) | \eta_{Otto}$ |
- +------------------------------------+------------------------------------+
- | Same Maximum Peak Pressure | $\eta_{Diesel} > \eta_{Dual} > |
- | ($P_{max}$) & Same Work Output ($W$) | \eta_{Otto}$ |
- +------------------------------------+------------------------------------+
- Mean Effective Pressure (MEP)
The Mean Effective Pressure is a fictitious constant pressure that, if exerted on the piston during the entire power stroke, would produce the identical net work output: MEP = W n e t V d = W n e t V 1 − V 2 = W n e t V 1 ( 1 − 1 / r ) \text{MEP} = \frac{W_{net}}{V_d} = \frac{W_{net}}{V_1 - V_2} = \frac{W_{net}}{V_1(1 - 1/r)} MEP = V d W n e t = V 1 − V 2 W n e t = V 1 ( 1 − 1/ r ) W n e t
6. The Joule / Brayton Gas Turbine Cycle
The fundamental air-standard cycle for open and closed gas turbine power plants. BRAYTON CYCLE: P-v DIAGRAM BRAYTON CYCLE: T-s DIAGRAM
- P ^ T ^
- | 2 Q_in 3 | 3 (T_max)
- | *--------* (P_2 = P_3) | / \
- | / \ | Q_in / \ Isentropic
- | / \ Isentropic | / \ Expansion
- | / \ Expansion | 2 4
- | 1*--------------*4 (P_1 = P_4) | \ /
- | Q_out | Q_out \ /
- +--------------------------> v +---------1-+------------> s
- Brayton Cycle Thermal Efficiency Derivation
Pressure Ratio ( r p r_p r p ): r p = P 2 P 1 = P 3 P 4 r_p = \frac{P_2}{P_1} = \frac{P_3}{P_4} r p = P 1 P 2 = P 4 P 3
Thermal Efficiency ( η B r a y t o n \eta_{Brayton} η B r a y t o n ): η B r a y t o n = 1 − Q o u t Q i n = 1 − c p ( T 4 − T 1 ) c p ( T 3 − T 2 ) = 1 − T 1 ( T 4 / T 1 − 1 ) T 2 ( T 3 / T 2 − 1 ) \eta_{Brayton} = 1 - \frac{Q_{out}}{Q_{in}} = 1 - \frac{c_p(T_4 - T_1)}{c_p(T_3 - T_2)} = 1 - \frac{T_1(T_4/T_1 - 1)}{T_2(T_3/T_2 - 1)} η B r a y t o n = 1 − Q in Q o u t = 1 − c p ( T 3 − T 2 ) c p ( T 4 − T 1 ) = 1 − T 2 ( T 3 / T 2 − 1 ) T 1 ( T 4 / T 1 − 1 )
Since T 2 T 1 = ( P 2 P 1 ) γ − 1 γ = r p γ − 1 γ \frac{T_2}{T_1} = \left(\frac{P_2}{P_1}\right)^{\frac{\gamma-1}{\gamma}} = r_p^{\frac{\gamma-1}{\gamma}} T 1 T 2 = ( P 1 P 2 ) γ γ − 1 = r p γ γ − 1 and T 3 T 4 = r p γ − 1 γ \frac{T_3}{T_4} = r_p^{\frac{\gamma-1}{\gamma}} T 4 T 3 = r p γ γ − 1 : η B r a y t o n = 1 − 1 r p γ − 1 γ \eta_{Brayton} = 1 - \frac{1}{r_p^{\frac{\gamma - 1}{\gamma}}} η B r a y t o n = 1 − r p γ γ − 1 1
Back Work Ratio ( r b w r_{bw} r b w ) r b w = W c o m p r e s s o r W t u r b i n e = c p ( T 2 − T 1 ) c p ( T 3 − T 4 ) r_{bw} = \frac{W_{compressor}}{W_{turbine}} = \frac{c_p(T_2 - T_1)}{c_p(T_3 - T_4)} r b w = W t u r bin e W co m p ressor = c p ( T 3 − T 4 ) c p ( T 2 − T 1 )
(Gas turbines have high back work ratios of 40 % − 60 % 40\%-60\% 40% − 60% , compared to < 1 % − 2 % <1\%-2\% < 1% − 2% in Rankine steam plants).
Optimum Pressure Ratio for Maximum Specific Net Work Output
Specific net work is: w n e t = w T − w C = c p ( T 3 − T 4 ) − c p ( T 2 − T 1 ) = c p [ T 3 ( 1 − 1 r p x ) − T 1 ( r p x − 1 ) ] w_{net} = w_T - w_C = c_p (T_3 - T_4) - c_p (T_2 - T_1) = c_p \left[ T_3\left(1 - \frac{1}{r_p^x}\right) - T_1(r_p^x - 1) \right] w n e t = w T − w C = c p ( T 3 − T 4 ) − c p ( T 2 − T 1 ) = c p [ T 3 ( 1 − r p x 1 ) − T 1 ( r p x − 1 ) ]
(Where x = γ − 1 γ x = \frac{\gamma - 1}{\gamma} x = γ γ − 1 ). Differentiating w n e t w_{net} w n e t with respect to r p x r_p^x r p x and setting to zero: r p , o p t = ( T m a x T m i n ) γ 2 ( γ − 1 ) = ( T 3 T 1 ) γ 2 ( γ − 1 ) r_{p, opt} = \left( \frac{T_{max}}{T_{min}} \right)^{\frac{\gamma}{2(\gamma - 1)}} = \left( \frac{T_3}{T_1} \right)^{\frac{\gamma}{2(\gamma - 1)}} r p , o pt = ( T min T ma x ) 2 ( γ − 1 ) γ = ( T 1 T 3 ) 2 ( γ − 1 ) γ
At this optimum pressure ratio: T 2 = T 4 = T 1 T 3 T_2 = T_4 = \sqrt{T_1 T_3} T 2 = T 4 = T 1 T 3 w n e t , m a x = c p ( T 3 − T 1 ) 2 w_{net, max} = c_p \left(\sqrt{T_3} - \sqrt{T_1}\right)^2 w n e t , ma x = c p ( T 3 − T 1 ) 2
- 7. Gas Turbine Modifications: Regeneration, Intercooling & Reheat GAS TURBINE CYCLE ENHANCEMENTS
- +-----------------------+-------------------------------------------------+
- | Modification | Primary Thermodynamic Effect & Purpose |
- +-----------------------+-------------------------------------------------+
- | **Regeneration** | Uses hot turbine exhaust ($T_4 > T_2$) to |
- | (Recuperation) | preheat combustor air. Increases thermal |
- | | efficiency at moderate $r_p$; work output same. |
- +-----------------------+-------------------------------------------------+
- | **Intercooling** | Multi-stage compression with intermediate |
- | | cooling. Minimizes compressor work $\int v dP$. |
- | | Increases net work output. |
- +-----------------------+-------------------------------------------------+
- | **Reheating** | Multi-stage expansion with intermediate heating.|
- | | Maximizes turbine work output; increases $w_n$. |
- +-----------------------+-------------------------------------------------+
- | **Combined Cycle** | Regeneration + Intercooling + Reheat approaches |
- | | Ericsson cycle limit ($\eta \to \eta_{Carnot}$).|
- +-----------------------+-------------------------------------------------+
- 8. Worked Numerical Examples
- Example 1: Otto Cycle Efficiency & Mean Effective Pressure (MEP)
Problem: An air-standard Otto cycle operates with a compression ratio r = 8 r = 8 r = 8 . At the start of compression, P 1 = 100 kPa , T 1 = 300 K P_1 = 100\text{ kPa}, T_1 = 300\text{ K} P 1 = 100 kPa , T 1 = 300 K . The maximum cycle temperature is T 3 = 1800 K T_3 = 1800\text{ K} T 3 = 1800 K . Given c v = 0.718 kJ/kg ⋅ K , R = 0.287 kJ/kg ⋅ K , γ = 1.4 c_v = 0.718\text{ kJ/kg}\cdot\text{K}, R = 0.287\text{ kJ/kg}\cdot\text{K}, \gamma = 1.4 c v = 0.718 kJ/kg ⋅ K , R = 0.287 kJ/kg ⋅ K , γ = 1.4 . Calculate:
Thermal efficiency ( η O t t o \eta_{Otto} η Ott o ).
Net work output per kg ( w n e t w_{net} w n e t ).
Mean Effective Pressure ( MEP \text{MEP} MEP ).
Solution:
Thermal efficiency: η O t t o = 1 − 1 r γ − 1 = 1 − 1 8 1.4 − 1 = 1 − 1 8 0.4 = 1 − 1 2.2974 = 1 − 0.4353 = 0.5647 (56.47%) \eta_{Otto} = 1 - \frac{1}{r^{\gamma - 1}} = 1 - \frac{1}{8^{1.4 - 1}} = 1 - \frac{1}{8^{0.4}} = 1 - \frac{1}{2.2974} = 1 - 0.4353 = 0.5647 \text{ (56.47\%)} η Ott o = 1 − r γ − 1 1 = 1 − 8 1.4 − 1 1 = 1 − 8 0.4 1 = 1 − 2.2974 1 = 1 − 0.4353 = 0.5647 (56.47%)
Temperature at state 2: T 2 = T 1 r γ − 1 = 300 × 2.2974 = 689.22 K T_2 = T_1 r^{\gamma-1} = 300 \times 2.2974 = 689.22\text{ K} T 2 = T 1 r γ − 1 = 300 × 2.2974 = 689.22 K
Heat supplied ( q i n q_{in} q in ): q i n = c v ( T 3 − T 2 ) = 0.718 × ( 1800 − 689.22 ) = 0.718 × 1110.78 = 797.54 kJ/kg q_{in} = c_v (T_3 - T_2) = 0.718 \times (1800 - 689.22) = 0.718 \times 1110.78 = 797.54\text{ kJ/kg} q in = c v ( T 3 − T 2 ) = 0.718 × ( 1800 − 689.22 ) = 0.718 × 1110.78 = 797.54 kJ/kg
Net work output ( w n e t w_{net} w n e t ): w n e t = η O t t o × q i n = 0.5647 × 797.54 = 450.37 kJ/kg w_{net} = \eta_{Otto} \times q_{in} = 0.5647 \times 797.54 = 450.37\text{ kJ/kg} w n e t = η Ott o × q in = 0.5647 × 797.54 = 450.37 kJ/kg
Mean Effective Pressure: v 1 = R T 1 P 1 = 0.287 × 300 100 = 0.861 m 3 / kg v_1 = \frac{R T_1}{P_1} = \frac{0.287 \times 300}{100} = 0.861\text{ m}^3/\text{kg} v 1 = P 1 R T 1 = 100 0.287 × 300 = 0.861 m 3 / kg v 2 = v 1 r = 0.861 8 = 0.1076 m 3 / kg v_2 = \frac{v_1}{r} = \frac{0.861}{8} = 0.1076\text{ m}^3/\text{kg} v 2 = r v 1 = 8 0.861 = 0.1076 m 3 / kg v d = v 1 − v 2 = 0.861 − 0.1076 = 0.7534 m 3 / kg v_d = v_1 - v_2 = 0.861 - 0.1076 = 0.7534\text{ m}^3/\text{kg} v d = v 1 − v 2 = 0.861 − 0.1076 = 0.7534 m 3 / kg MEP = w n e t v d = 450.37 kJ/kg 0.7534 m 3 / kg = 597.8 kPa = 5.98 bar \text{MEP} = \frac{w_{net}}{v_d} = \frac{450.37\text{ kJ/kg}}{0.7534\text{ m}^3/\text{kg}} = 597.8\text{ kPa} = 5.98\text{ bar} MEP = v d w n e t = 0.7534 m 3 / kg 450.37 kJ/kg = 597.8 kPa = 5.98 bar
Example 2: Brayton Cycle Optimum Pressure Ratio
Problem: In a stationary gas turbine power plant, air enters the compressor at T 1 = 300 K T_1 = 300\text{ K} T 1 = 300 K and turbine inlet temperature is limited by blade metallurgy to T 3 = 1200 K T_3 = 1200\text{ K} T 3 = 1200 K . Assuming an ideal Brayton cycle with γ = 1.4 \gamma = 1.4 γ = 1.4 , determine:
Optimum pressure ratio ( r p , o p t r_{p,opt} r p , o pt ) for maximum specific work output.
Thermal efficiency at this optimum pressure ratio.
Solution:
Optimum pressure ratio: r p , o p t = ( T 3 T 1 ) γ 2 ( γ − 1 ) = ( 1200 300 ) 1.4 2 ( 0.4 ) = ( 4 ) 1.4 0.8 = 4 1.75 = ( 2 2 ) 1.75 = 2 3.5 ≈ 11.31 r_{p,opt} = \left(\frac{T_3}{T_1}\right)^{\frac{\gamma}{2(\gamma - 1)}} = \left(\frac{1200}{300}\right)^{\frac{1.4}{2(0.4)}} = (4)^{\frac{1.4}{0.8}} = 4^{1.75} = (2^2)^{1.75} = 2^{3.5} \approx 11.31 r p , o pt = ( T 1 T 3 ) 2 ( γ − 1 ) γ = ( 300 1200 ) 2 ( 0.4 ) 1.4 = ( 4 ) 0.8 1.4 = 4 1.75 = ( 2 2 ) 1.75 = 2 3.5 ≈ 11.31
Thermal efficiency at r p , o p t r_{p,opt} r p , o pt : η = 1 − 1 r p , o p t γ − 1 γ = 1 − 1 11.31 0.4 1.4 = 1 − 1 11.31 0.2857 = 1 − 1 2.0 = 0.50 (50.0%) \eta = 1 - \frac{1}{r_{p,opt}^{\frac{\gamma-1}{\gamma}}} = 1 - \frac{1}{11.31^{\frac{0.4}{1.4}}} = 1 - \frac{1}{11.31^{0.2857}} = 1 - \frac{1}{2.0} = 0.50\text{ (50.0\%)} η = 1 − r p , o pt γ γ − 1 1 = 1 − 11.3 1 1.4 0.4 1 = 1 − 11.3 1 0.2857 1 = 1 − 2.0 1 = 0.50 (50.0%)
(Note: At optimum pressure ratio, η = 1 − T 1 / T 3 = 1 − 300 / 1200 = 1 − 0.5 = 0.50 \eta = 1 - \sqrt{T_1/T_3} = 1 - \sqrt{300/1200} = 1 - 0.5 = 0.50 η = 1 − T 1 / T 3 = 1 − 300/1200 = 1 − 0.5 = 0.50 ).