Study guide

12.8 Steam & Gas Turbines: Impulse, Reaction & Velocity Diagrams

Coal India Management Trainee CIL MT

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: CIL MT Exam Overview & Coal Sector Landscape

1.1 CIL MT Exam Pattern, Marking Scheme & Strategy 1.2 Coal India Limited: Corporate Structure, Maharatna Status & Subsidiaries 1.3 Indian Coal Mining Sector, Energy Mix & Environmental Regulations

2 Chapter 2: Paper-I General Awareness, Polity & Current Affairs

2.1 Indian Constitution, Governance & Statutory Bodies 2.2 Indian Economy, Union Budget & Economic Planning 2.3 Indian Geography, Mineral Belts & Environmental Ecology 2.4 Modern Indian History, Freedom Struggle & Cultural Heritage 2.5 General Science: Physics, Chemistry & Biology Fundamentals 2.6 Inventions, Discoveries & Scientific-Technological Development 2.7 Uses of Internet, Computer Awareness & Digital Governance 2.8 National & International Organisations 2.9 Awards, Honours & Sports 2.10 Books & Authors, Important Monuments & Places of India 2.11 Ports, Power Plants & Infrastructure of India 2.12 Climate Change, SDGs, National Parks & Wildlife Sanctuaries 2.13 Flagship Government Programmes & Current Affairs Method 2.14 World Physical, Social & Economic Geography

3 Chapter 3: Paper-I Reasoning & Logical Ability

3.1 Series Completion, Coding-Decoding & Semantic Analogies 3.2 Syllogisms, Logical Deduction & Venn Diagrams 3.3 Seating Arrangements, Linear/Circular Alignments & Puzzles 3.4 Direction Sense, Blood Relations & Order/Ranking 3.5 Alphabetical & Alphanumeric Series 3.6 Statement & Conclusions, Statement & Arguments 3.7 Clocks & Calendars 3.8 Cubes, Dice & Figure Counting 3.9 Mirror Images, Water Images, Embedded Figures & Non-Verbal Series 3.10 Decision Making & Data Analysis in Reasoning

4 Chapter 4: Paper-I Numerical Ability & Quantitative Aptitude

4.1 Arithmetic Foundations: Percentages, Profit & Loss, Ratio & Proportion 4.2 Averages, Simple/Compound Interest, Alligations & Mixtures 4.3 Time & Work, Pipes & Cisterns, Time, Speed & Distance 4.4 Algebra, Mensuration, Geometry & Data Interpretation (DI) 4.5 Number System, LCM, HCF & Decimal Fractions 4.6 Surds, Indices & Simplification 4.7 Problems on Ages 4.8 Boats & Streams and Problems on Trains 4.9 Permutations & Combinations 4.10 Probability for Quantitative Aptitude

5 Chapter 5: Paper-I General English & Verbal Ability

5.1 English Grammar, Error Spotting & Sentence Correction 5.2 Vocabulary Building: Synonyms, Antonyms, Idioms & Phrases 5.3 Reading Comprehension, Cloze Tests & Para Jumbles 5.4 Fill in the Blanks, Cloze Passages & Sentence Completion 5.5 Jumbled Sentences & Sentence Improvement

6 Chapter 6: Paper-II Engineering Mathematics

6.1 Matrix Algebra, Rank & Systems of Linear Equations 6.2 Eigenvalues, Eigenvectors & the Cayley-Hamilton Theorem 6.3 Limits, Continuity, Differentiability & Mean Value Theorems 6.4 Maxima-Minima, Indeterminate Forms & Taylor Series 6.5 Definite, Improper, Double & Triple Integrals 6.6 Partial Derivatives, Total Derivative & Multivariable Optimisation 6.7 First-Order Differential Equations: Linear & Non-Linear 6.8 Higher-Order Linear Differential Equations & Engineering Applications 6.9 Laplace Transforms & Transfer-Function Methods 6.10 Probability, Conditional Probability & Bayes' Theorem 6.11 Random Variables, Distributions & Descriptive Statistics 6.12 Numerical Methods: Root Finding, Integration & ODE Solvers

7 Chapter 7: Paper-II Engineering Mechanics & Statics-Dynamics

7.1 Force Systems, Coplanar Equilibrium & Lami's Theorem 7.2 Plane Trusses, Friction Mechanics & Screws/Wedges 7.3 Centroids, Center of Gravity & Moment of Inertia 7.4 Kinematics, Kinetics of Particles & Rigid Body Dynamics 7.5 Virtual Work & Lagrange's Equation 7.6 Rolling Friction, Belt-Pulley Drives, Brakes, Clutches & Vehicle Dynamics

8 Chapter 8: Paper-II Mechanics of Materials & Structural Integrity

8.1 Simple Stresses, Strains, Elastic Moduli & Thermal Stresses 8.2 Principal Stresses, Strain Energy & Mohr's Circle 8.3 Shear Force & Bending Moment Diagrams, Beam Bending & Shear Stresses 8.4 Torsion of Circular Shafts, Springs & Column Buckling 8.5 Thin Cylinders, Spheres & Thick-Walled Pressure Vessels 8.6 Deflection of Beams: Double Integration, Macaulay & Moment-Area 8.7 Shear Centre & Unsymmetrical Bending 8.8 Strain Gauges, Rosettes & Experimental Stress Analysis 8.9 Mechanical Testing: Universal Testing Machine, Hardness & Impact

9 Chapter 9: Paper-II Theory of Machines & Mechanical Vibrations

9.1 Simple Mechanisms, Kinematic Inversions & Velocity/Acceleration Diagrams 9.2 Cams & Followers, Toothed Gearing & Epicyclic Gear Trains 9.3 Flywheels, Centrifugal/Inertia Governors & Rotor Balancing 9.4 Free, Damped & Forced Single-Degree-of-Freedom Vibrations 9.5 Gyroscopic Couple & Gyroscopic Effects

10 Chapter 10: Paper-II Machine Design & Failure Theories

10.1 Static Failure Theories & Variable/Fatigue Loading 10.2 Design of Threaded Fasteners, Welded & Riveted Joints 10.3 Design of Shafts, Keys, Couplings & Rolling/Sliding Bearings 10.4 Design of Spur, Helical, Bevel & Worm Gears 10.5 Design of Helical, Leaf & Torsion Springs 10.6 Design of Brakes & Clutches: Energy, Lining Pressure & Heat

11 Chapter 11: Paper-II Fluid Mechanics & Hydraulic Machinery

11.1 Fluid Properties, Hydrostatic Forces & Buoyancy 11.2 Fluid Kinematics, Continuity & Bernoulli's Equation 11.3 Viscous Flow in Pipes, Boundary Layer & Minor Losses 11.4 Hydraulic Turbines, Centrifugal & Reciprocating Pumps 11.5 Dimensional Analysis, Similitude & Model Testing 11.6 Control-Volume Analysis: Continuity, Momentum & Energy

12 Chapter 12: Paper-II Thermodynamics, Thermal Cycles & Turbomachinery

12.1 Fundamental Concepts, First & Second Laws of Thermodynamics 12.2 Entropy, Availability, Exergy & Properties of Pure Substances 12.3 Air-Standard Gas Power Cycles: Otto, Diesel, Dual & Brayton 12.4 Vapour Power Cycles: Ideal, Reheat & Regenerative Rankine Cycles 12.5 Thermodynamic Relations: Maxwell, Clausius-Clapeyron & Joule-Thomson 12.6 Behaviour of Ideal & Real Gases and Equations of State 12.7 Air & Gas Compressors: Reciprocating, Rotary & Multi-Stage 12.8 Steam & Gas Turbines: Impulse, Reaction & Velocity Diagrams

13 Chapter 13: Paper-II Heat Transfer, Refrigeration & Air Conditioning

13.1 Steady & Unsteady Conduction, Extended Surfaces (Fins) 13.2 Forced/Natural Convection, Radiation & Heat Exchanger LMTD/NTU 13.3 Vapour Compression & Vapour Absorption Refrigeration Systems 13.4 Psychrometric Properties, Processes & Air Conditioning Systems 13.5 Gas Refrigeration, Heat Pump Cycles & Cryogenics

14 Chapter 14: Paper-II Materials Science, Metallurgy & Manufacturing Technology

14.1 Crystal Structures, Phase Diagrams & Iron-Iron Carbide Equilibrium 14.2 Heat Treatment Processes & Engineering Alloy Steels 14.3 Casting Processes, Metal Forming & Welding Metallurgy 14.4 Metal Cutting Mechanics, Tool Life & Machine Tools 14.5 Plastic Deformation, Yield Criteria & Load Estimation in Bulk Forming 14.6 Sheet Metal Forming: Shearing, Bending & Deep Drawing 14.7 Powder Metallurgy 14.8 Brazing, Soldering & Adhesive Bonding 14.9 Non-Traditional Machining: EDM, ECM, USM, AJM, LBM & EBM 14.10 Abrasive Machining, Grinding & Superfinishing 14.11 Principles of Work Holding, Jigs & Fixtures 14.12 Economics of Machining & Tool Life Optimisation

15 Chapter 15: Paper-II Metrology, Quality Control & Industrial Engineering / OR

15.1 Limits, Fits, Tolerances, Gauges & Surface Metrology 15.2 Production Planning, Forecasting & Inventory Control Models 15.3 Operations Research: Linear Programming & Transportation/Assignment 15.4 Project Management: CPM, PERT, Network Analysis & Crashing 15.5 Comparators & Interferometry 15.6 Coordinate Measuring Machines & Machine Tool Alignment Testing 15.7 Computer Integrated Manufacturing: CAD/CAM & Integration Tools 15.8 NC/CNC Machines & CNC Part Programming 15.9 Material Requirements Planning, Scheduling & Sequencing 15.10 Queuing Theory & Simple Queuing Models 15.11 Network Flow Models: Shortest Route, Maximal Flow & Spanning Tree

12.8 Steam & Gas Turbines: Impulse, Reaction & Velocity Diagrams

Key Takeaways Explain This Topic AI

Impulse and reaction principles, velocity diagrams, and steam and gas turbines are all named in the Turbomachinery item of the CIL Mechanical Paper-II syllabus.

In a pure impulse turbine the entire pressure drop occurs in the nozzles so the relative velocity is unchanged across the blades, whereas in a reaction turbine the pressure also drops in the moving blades.

The degree of reaction is the ratio of enthalpy drop in the moving blades to the total stage enthalpy drop, being zero for pure impulse and one half for a Parsons turbine.

Maximum blade efficiency for a single-stage impulse turbine occurs when the blade speed ratio equals half the cosine of the nozzle angle.

Last updated: August 2026

Impulse Versus Reaction

All turbines extract work by turning a fluid stream, but they differ in where the pressure drop occurs .

  • Feature Impulse turbine Reaction turbine
  • Pressure drop Entirely in the fixed nozzles Partly in nozzles, partly in moving blades
  • Pressure across moving blades Constant Falls
  • Relative velocity across blades Constant in magnitude (ideally) Increases
  • Blade passage Constant area Converging (acts as a nozzle)
  • Blade profile Symmetrical, bucket-shaped Aerofoil, asymmetric
  • Admission Can be partial Must be full
  • Example De Laval, Curtis, Rateau; Pelton wheel Parsons; Francis and Kaplan turbines

The reason a reaction turbine requires full admission is that a pressure difference exists across the moving blades. If only part of the annulus were fed, gas would leak circumferentially through the unfed passages. An impulse turbine has no such pressure difference, so partial admission is permissible — which is why the first, high-pressure stage of a large steam turbine is usually an impulse stage.

Degree of Reaction R = Enthalpy drop in moving blades Total enthalpy drop in the stage R = \frac{\text{Enthalpy drop in moving blades}}{\text{Total enthalpy drop in the stage}} R = Total enthalpy drop in the stage Enthalpy drop in moving blades ​

  • R R R Turbine type
  • R = 0 R = 0 R = 0 Pure impulse
  • R = 0.5 R = 0.5 R = 0.5 Parsons reaction turbine; blade and nozzle shapes identical
  • R = 1 R = 1 R = 1 Pure reaction (rare; the lawn sprinkler is the classic illustration)

The 50% reaction case is important: the fixed and moving blade rows have the same profile, so the velocity triangles at inlet and outlet are mirror images. This symmetry simplifies both manufacture and analysis.

Velocity Triangles

The velocity diagram is the central analytical tool. Three velocities appear at each of inlet and outlet:

  • Symbol Meaning
  • V V V Absolute velocity of the fluid
  • u u u Blade (peripheral) velocity, u = π D N / 60 u = \pi D N/60 u = π D N /60
  • V r V_r V r ​ Relative velocity of fluid with respect to the blade

These are related by the vector triangle V ⃗ = u ⃗ + V r ⃗ \vec{V} = \vec{u} + \vec{V_r} V = u + V r ​ ​ . Two component directions matter:

V w V_w V w ​ , the whirl (tangential) component, which produces torque;

V f V_f V f ​ , the flow (axial) component, which carries the mass through.

Angles: α \alpha α is the nozzle angle at inlet, β \beta β the blade inlet angle, and the corresponding outlet angles are usually written ϕ \phi ϕ and θ \theta θ .

Work and Efficiency for an Impulse Stage

From the momentum equation applied tangentially, the work per unit mass is W = u ( V w 1 + V w 2 ) W = u\left(V_{w1} + V_{w2}\right) W = u ( V w 1 ​ + V w 2 ​ )

where the whirl components are added when the outlet whirl is in the opposite direction to the inlet whirl, which is the usual case. In terms of relative velocities and blade angles: W = u V r 1 ( cos ⁡ β + k V r 2 V r 1 cos ⁡ θ ) W = u\,V_{r1}\left(\cos\beta + k\frac{V_{r2}}{V_{r1}}\cos\theta\right) W = u V r 1 ​ ( cos β + k V r 1 ​ V r 2 ​ ​ cos θ )

where k = V r 2 / V r 1 k = V_{r2}/V_{r1} k = V r 2 ​ / V r 1 ​ is the blade velocity coefficient , less than one because of friction. For smooth, symmetrical blading, k ≈ 0.9 k \approx 0.9 k ≈ 0.9 to 0.95 0.95 0.95 and θ = β \theta = \beta θ = β .

Blade or diagram efficiency η b = Work done on blades Kinetic energy supplied = 2 u ( V w 1 + V w 2 ) V 1 2 \eta_b = \frac{\text{Work done on blades}}{\text{Kinetic energy supplied}} = \frac{2u(V_{w1}+V_{w2})}{V_1^2} η b ​ = Kinetic energy supplied Work done on blades ​ = V 1 2 ​ 2 u ( V w 1 ​ + V w 2 ​ ) ​

Defining the blade speed ratio ρ = u / V 1 \rho = u/V_1 ρ = u / V 1 ​ and taking symmetric, frictionless blades: η b = 4 ρ ( cos ⁡ α − ρ ) \eta_b = 4\rho\left(\cos\alpha - \rho\right) η b ​ = 4 ρ ( cos α − ρ )

Differentiating with respect to ρ \rho ρ and setting to zero gives the optimum: ρ opt = cos ⁡ α 2 , η b , max ⁡ = cos ⁡ 2 α \boxed{\rho_{\text{opt}} = \frac{\cos\alpha}{2}}, \qquad \eta_{b,\max} = \cos^2\alpha ρ opt ​ = 2 cos α ​ ​ , η b , m a x ​ = cos 2 α

So a nozzle angle of 20 degrees gives ρ opt = 0.47 \rho_{\text{opt}} = 0.47 ρ opt ​ = 0.47 and a maximum blade efficiency of cos ⁡ 2 20 ∘ = 0.883 \cos^2 20^\circ = 0.883 cos 2 2 0 ∘ = 0.883 . Reducing the nozzle angle improves efficiency but reduces the flow area, so the practical range is 16 to 22 degrees.

At the optimum, the absolute exit velocity is axial , meaning the leaving whirl is zero and no kinetic energy is wasted in swirl.

Reaction Stage: Parsons Turbine

For 50% reaction with symmetric blading, the corresponding results are W = u ( 2 V 1 cos ⁡ α − u ) W = u\left(2V_1\cos\alpha - u\right) W = u ( 2 V 1 ​ cos α − u ) η b = 2 ρ ( 2 cos ⁡ α − ρ ) 1 + 2 ρ cos ⁡ α − ρ 2 \eta_b = \frac{2\rho\left(2\cos\alpha - \rho\right)}{1 + 2\rho\cos\alpha - \rho^2} η b ​ = 1 + 2 ρ cos α − ρ 2 2 ρ ( 2 cos α − ρ ) ​

with optimum at ρ opt = cos ⁡ α , η b , max ⁡ = 2 cos ⁡ 2 α 1 + cos ⁡ 2 α \rho_{\text{opt}} = \cos\alpha, \qquad \eta_{b,\max} = \frac{2\cos^2\alpha}{1+\cos^2\alpha} ρ opt ​ = cos α , η b , m a x ​ = 1 + cos 2 α 2 cos 2 α ​

Note the contrast with the impulse case: the optimum blade speed ratio is cos ⁡ α \cos\alpha cos α rather than cos ⁡ α / 2 \cos\alpha/2 cos α /2 , so a reaction stage runs at roughly twice the blade speed of an impulse stage for the same steam velocity. For α = 20 \alpha = 20 α = 20 degrees the maximum blade efficiency is 2 ( 0.883 ) / ( 1.883 ) = 0.938 2(0.883)/(1.883) = 0.938 2 ( 0.883 ) / ( 1.883 ) = 0.938 , higher than the impulse value — reaction staging is intrinsically more efficient, which is why the low-pressure end of a large turbine is reaction blading.

Compounding

A single impulse stage expanding steam from boiler to condenser pressure would produce an impractically high steam velocity and hence a dangerously high blade speed. Compounding distributes the drop across several stages.

Method How it works Characteristic

Velocity compounding (Curtis) One nozzle set; several moving rows separated by fixed guide rows that redirect but do not expand Large drop in one stage; lower efficiency; short, cheap machine

Pressure compounding (Rateau) Several nozzle-and-blade stages, each taking part of the pressure drop Higher efficiency; more stages; longer machine

Pressure-velocity compounding Combination of both Used in some marine and industrial designs

Reaction (Parsons) Continuous expansion through alternating fixed and moving rows Highest efficiency; largest number of stages

For a Curtis stage with n n n moving rows, the optimum blade speed ratio is ρ opt = cos ⁡ α 2 n \rho_{\text{opt}} = \frac{\cos\alpha}{2n} ρ opt ​ = 2 n cos α ​

and the work is distributed across the rows in the ratio ( 2 n − 1 ) : ( 2 n − 3 ) : … : 1 (2n-1) : (2n-3) : \ldots : 1 ( 2 n − 1 ) : ( 2 n − 3 ) : … : 1 . For a two-row Curtis wheel, the first row does three times the work of the second — a favourite examination result.

Losses and Efficiencies

  • Efficiency Definition
  • Nozzle Actual kinetic energy at nozzle exit divided by isentropic enthalpy drop
  • Blade (diagram) Work on blades divided by kinetic energy supplied to blades
  • Stage Work on blades divided by isentropic enthalpy drop of the stage
  • Internal Actual work divided by isentropic work for the whole turbine
  • Mechanical Shaft output divided by internal work
  • Overall Shaft output divided by isentropic enthalpy drop

The reheat factor in a multi-stage turbine is the ratio of the sum of the individual stage isentropic drops to the overall isentropic drop. Because the constant-pressure lines on an enthalpy-entropy chart diverge, this ratio is always greater than one , typically 1.03 to 1.06. It means a multi-stage turbine recovers part of each stage's friction loss as useful enthalpy in the next stage.

Gas Turbines

A gas turbine drives its own compressor, and the compressor absorbs a large fraction of the turbine output. The work ratio is Work ratio = W T − W C W T \text{Work ratio} = \frac{W_T - W_C}{W_T} Work ratio = W T ​ W T ​ − W C ​ ​

and it is typically only 0.3 to 0.5. That low value is the defining characteristic of the machine: a modest fall in turbine or compressor isentropic efficiency causes a disproportionately large fall in net output, which is why gas turbines were impractical until component efficiencies reached about 85%.

For the Brayton cycle, the pressure ratio for maximum net specific work is r p , opt = ( T max ⁡ T min ⁡ ) γ / 2 ( γ − 1 ) r_{p,\text{opt}} = \left(\frac{T_{\max}}{T_{\min}}\right)^{\gamma/2(\gamma-1)} r p , opt ​ = ( T m i n ​ T m a x ​ ​ ) γ /2 ( γ − 1 )

which differs from the pressure ratio for maximum thermal efficiency — the latter rises indefinitely with pressure ratio. Real designs compromise between the two.

Blade cooling matters because turbine inlet temperature directly sets efficiency and output, but exceeds the melting point of the blade alloys. Modern practice combines directionally solidified or single-crystal nickel superalloys, internal convective cooling passages, film cooling through surface holes, and thermal barrier coatings.