Study guide

12.5 Thermodynamic Relations: Maxwell, Clausius-Clapeyron & Joule-Thomson

Coal India Management Trainee CIL MT

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: CIL MT Exam Overview & Coal Sector Landscape

1.1 CIL MT Exam Pattern, Marking Scheme & Strategy 1.2 Coal India Limited: Corporate Structure, Maharatna Status & Subsidiaries 1.3 Indian Coal Mining Sector, Energy Mix & Environmental Regulations

2 Chapter 2: Paper-I General Awareness, Polity & Current Affairs

2.1 Indian Constitution, Governance & Statutory Bodies 2.2 Indian Economy, Union Budget & Economic Planning 2.3 Indian Geography, Mineral Belts & Environmental Ecology 2.4 Modern Indian History, Freedom Struggle & Cultural Heritage 2.5 General Science: Physics, Chemistry & Biology Fundamentals 2.6 Inventions, Discoveries & Scientific-Technological Development 2.7 Uses of Internet, Computer Awareness & Digital Governance 2.8 National & International Organisations 2.9 Awards, Honours & Sports 2.10 Books & Authors, Important Monuments & Places of India 2.11 Ports, Power Plants & Infrastructure of India 2.12 Climate Change, SDGs, National Parks & Wildlife Sanctuaries 2.13 Flagship Government Programmes & Current Affairs Method 2.14 World Physical, Social & Economic Geography

3 Chapter 3: Paper-I Reasoning & Logical Ability

3.1 Series Completion, Coding-Decoding & Semantic Analogies 3.2 Syllogisms, Logical Deduction & Venn Diagrams 3.3 Seating Arrangements, Linear/Circular Alignments & Puzzles 3.4 Direction Sense, Blood Relations & Order/Ranking 3.5 Alphabetical & Alphanumeric Series 3.6 Statement & Conclusions, Statement & Arguments 3.7 Clocks & Calendars 3.8 Cubes, Dice & Figure Counting 3.9 Mirror Images, Water Images, Embedded Figures & Non-Verbal Series 3.10 Decision Making & Data Analysis in Reasoning

4 Chapter 4: Paper-I Numerical Ability & Quantitative Aptitude

4.1 Arithmetic Foundations: Percentages, Profit & Loss, Ratio & Proportion 4.2 Averages, Simple/Compound Interest, Alligations & Mixtures 4.3 Time & Work, Pipes & Cisterns, Time, Speed & Distance 4.4 Algebra, Mensuration, Geometry & Data Interpretation (DI) 4.5 Number System, LCM, HCF & Decimal Fractions 4.6 Surds, Indices & Simplification 4.7 Problems on Ages 4.8 Boats & Streams and Problems on Trains 4.9 Permutations & Combinations 4.10 Probability for Quantitative Aptitude

5 Chapter 5: Paper-I General English & Verbal Ability

5.1 English Grammar, Error Spotting & Sentence Correction 5.2 Vocabulary Building: Synonyms, Antonyms, Idioms & Phrases 5.3 Reading Comprehension, Cloze Tests & Para Jumbles 5.4 Fill in the Blanks, Cloze Passages & Sentence Completion 5.5 Jumbled Sentences & Sentence Improvement

6 Chapter 6: Paper-II Engineering Mathematics

6.1 Matrix Algebra, Rank & Systems of Linear Equations 6.2 Eigenvalues, Eigenvectors & the Cayley-Hamilton Theorem 6.3 Limits, Continuity, Differentiability & Mean Value Theorems 6.4 Maxima-Minima, Indeterminate Forms & Taylor Series 6.5 Definite, Improper, Double & Triple Integrals 6.6 Partial Derivatives, Total Derivative & Multivariable Optimisation 6.7 First-Order Differential Equations: Linear & Non-Linear 6.8 Higher-Order Linear Differential Equations & Engineering Applications 6.9 Laplace Transforms & Transfer-Function Methods 6.10 Probability, Conditional Probability & Bayes' Theorem 6.11 Random Variables, Distributions & Descriptive Statistics 6.12 Numerical Methods: Root Finding, Integration & ODE Solvers

7 Chapter 7: Paper-II Engineering Mechanics & Statics-Dynamics

7.1 Force Systems, Coplanar Equilibrium & Lami's Theorem 7.2 Plane Trusses, Friction Mechanics & Screws/Wedges 7.3 Centroids, Center of Gravity & Moment of Inertia 7.4 Kinematics, Kinetics of Particles & Rigid Body Dynamics 7.5 Virtual Work & Lagrange's Equation 7.6 Rolling Friction, Belt-Pulley Drives, Brakes, Clutches & Vehicle Dynamics

8 Chapter 8: Paper-II Mechanics of Materials & Structural Integrity

8.1 Simple Stresses, Strains, Elastic Moduli & Thermal Stresses 8.2 Principal Stresses, Strain Energy & Mohr's Circle 8.3 Shear Force & Bending Moment Diagrams, Beam Bending & Shear Stresses 8.4 Torsion of Circular Shafts, Springs & Column Buckling 8.5 Thin Cylinders, Spheres & Thick-Walled Pressure Vessels 8.6 Deflection of Beams: Double Integration, Macaulay & Moment-Area 8.7 Shear Centre & Unsymmetrical Bending 8.8 Strain Gauges, Rosettes & Experimental Stress Analysis 8.9 Mechanical Testing: Universal Testing Machine, Hardness & Impact

9 Chapter 9: Paper-II Theory of Machines & Mechanical Vibrations

9.1 Simple Mechanisms, Kinematic Inversions & Velocity/Acceleration Diagrams 9.2 Cams & Followers, Toothed Gearing & Epicyclic Gear Trains 9.3 Flywheels, Centrifugal/Inertia Governors & Rotor Balancing 9.4 Free, Damped & Forced Single-Degree-of-Freedom Vibrations 9.5 Gyroscopic Couple & Gyroscopic Effects

10 Chapter 10: Paper-II Machine Design & Failure Theories

10.1 Static Failure Theories & Variable/Fatigue Loading 10.2 Design of Threaded Fasteners, Welded & Riveted Joints 10.3 Design of Shafts, Keys, Couplings & Rolling/Sliding Bearings 10.4 Design of Spur, Helical, Bevel & Worm Gears 10.5 Design of Helical, Leaf & Torsion Springs 10.6 Design of Brakes & Clutches: Energy, Lining Pressure & Heat

11 Chapter 11: Paper-II Fluid Mechanics & Hydraulic Machinery

11.1 Fluid Properties, Hydrostatic Forces & Buoyancy 11.2 Fluid Kinematics, Continuity & Bernoulli's Equation 11.3 Viscous Flow in Pipes, Boundary Layer & Minor Losses 11.4 Hydraulic Turbines, Centrifugal & Reciprocating Pumps 11.5 Dimensional Analysis, Similitude & Model Testing 11.6 Control-Volume Analysis: Continuity, Momentum & Energy

12 Chapter 12: Paper-II Thermodynamics, Thermal Cycles & Turbomachinery

12.1 Fundamental Concepts, First & Second Laws of Thermodynamics 12.2 Entropy, Availability, Exergy & Properties of Pure Substances 12.3 Air-Standard Gas Power Cycles: Otto, Diesel, Dual & Brayton 12.4 Vapour Power Cycles: Ideal, Reheat & Regenerative Rankine Cycles 12.5 Thermodynamic Relations: Maxwell, Clausius-Clapeyron & Joule-Thomson 12.6 Behaviour of Ideal & Real Gases and Equations of State 12.7 Air & Gas Compressors: Reciprocating, Rotary & Multi-Stage 12.8 Steam & Gas Turbines: Impulse, Reaction & Velocity Diagrams

13 Chapter 13: Paper-II Heat Transfer, Refrigeration & Air Conditioning

13.1 Steady & Unsteady Conduction, Extended Surfaces (Fins) 13.2 Forced/Natural Convection, Radiation & Heat Exchanger LMTD/NTU 13.3 Vapour Compression & Vapour Absorption Refrigeration Systems 13.4 Psychrometric Properties, Processes & Air Conditioning Systems 13.5 Gas Refrigeration, Heat Pump Cycles & Cryogenics

14 Chapter 14: Paper-II Materials Science, Metallurgy & Manufacturing Technology

14.1 Crystal Structures, Phase Diagrams & Iron-Iron Carbide Equilibrium 14.2 Heat Treatment Processes & Engineering Alloy Steels 14.3 Casting Processes, Metal Forming & Welding Metallurgy 14.4 Metal Cutting Mechanics, Tool Life & Machine Tools 14.5 Plastic Deformation, Yield Criteria & Load Estimation in Bulk Forming 14.6 Sheet Metal Forming: Shearing, Bending & Deep Drawing 14.7 Powder Metallurgy 14.8 Brazing, Soldering & Adhesive Bonding 14.9 Non-Traditional Machining: EDM, ECM, USM, AJM, LBM & EBM 14.10 Abrasive Machining, Grinding & Superfinishing 14.11 Principles of Work Holding, Jigs & Fixtures 14.12 Economics of Machining & Tool Life Optimisation

15 Chapter 15: Paper-II Metrology, Quality Control & Industrial Engineering / OR

15.1 Limits, Fits, Tolerances, Gauges & Surface Metrology 15.2 Production Planning, Forecasting & Inventory Control Models 15.3 Operations Research: Linear Programming & Transportation/Assignment 15.4 Project Management: CPM, PERT, Network Analysis & Crashing 15.5 Comparators & Interferometry 15.6 Coordinate Measuring Machines & Machine Tool Alignment Testing 15.7 Computer Integrated Manufacturing: CAD/CAM & Integration Tools 15.8 NC/CNC Machines & CNC Part Programming 15.9 Material Requirements Planning, Scheduling & Sequencing 15.10 Queuing Theory & Simple Queuing Models 15.11 Network Flow Models: Shortest Route, Maximal Flow & Spanning Tree

12.5 Thermodynamic Relations: Maxwell, Clausius-Clapeyron & Joule-Thomson

Key Takeaways Explain This Topic AI

Thermodynamic relations are named explicitly in the Thermodynamics bullet of the CIL Mechanical Paper-II syllabus.

The four Maxwell relations follow from the equality of mixed second partial derivatives of the four thermodynamic potentials u, h, f and g.

The Clausius-Clapeyron equation gives the slope of a phase boundary as the latent heat divided by the product of temperature and the change in specific volume.

The Joule-Thomson coefficient is the change of temperature with pressure at constant enthalpy, and a gas cools on throttling only when that coefficient is positive.

Last updated: August 2026

The Problem Thermodynamic Relations Solve

Pressure, volume and temperature can be measured directly. Internal energy, enthalpy and entropy cannot. Thermodynamic relations are the algebra that expresses the unmeasurable properties in terms of the measurable ones, which is how steam tables and refrigerant property charts are constructed in the first place.

The mathematical engine is the equality of mixed second partial derivatives established in the Engineering Mathematics chapter: if z = z ( x , y ) z = z(x,y) z = z ( x , y ) is a well-behaved function, then ∂ 2 z ∂ x ∂ y = ∂ 2 z ∂ y ∂ x \frac{\partial^2 z}{\partial x\,\partial y} = \frac{\partial^2 z}{\partial y\,\partial x} ∂ x ∂ y ∂ 2 z ​ = ∂ y ∂ x ∂ 2 z ​

That identity, applied to four thermodynamic potentials, generates the whole topic.

The Four Thermodynamic Potentials

  • Potential Definition Natural variables
  • Internal energy u u u — s , v s, v s , v
  • Enthalpy h h h h = u + p v h = u + pv h = u + p v s , p s, p s , p
  • Helmholtz function f f f f = u − T s f = u - Ts f = u − T s T , v T, v T , v
  • Gibbs function g g g g = h − T s g = h - Ts g = h − T s T , p T, p T , p
  • The Gibbsian Equations

Combining the first and second laws for a reversible process in a simple compressible system: d u = T d s − p d v du = T\,ds - p\,dv d u = T d s − p d v d h = T d s + v d p dh = T\,ds + v\,dp d h = T d s + v d p d f = − s d T − p d v df = -s\,dT - p\,dv df = − s d T − p d v d g = − s d T + v d p dg = -s\,dT + v\,dp d g = − s d T + v d p

Each is an exact differential of the form d z = M d x + N d y dz = M\,dx + N\,dy d z = M d x + N d y , so each satisfies ( ∂ M ∂ y ) x = ( ∂ N ∂ x ) y \left(\frac{\partial M}{\partial y}\right)_x = \left(\frac{\partial N}{\partial x}\right)_y ( ∂ y ∂ M ​ ) x ​ = ( ∂ x ∂ N ​ ) y ​

The Four Maxwell Relations

Applying the exactness condition to each Gibbsian equation in turn: ( ∂ T ∂ v ) s = − ( ∂ p ∂ s ) v (from d u ) \left(\frac{\partial T}{\partial v}\right)_s = -\left(\frac{\partial p}{\partial s}\right)_v \qquad \text{(from } du\text{)} ( ∂ v ∂ T ​ ) s ​ = − ( ∂ s ∂ p ​ ) v ​ (from d u ) ( ∂ T ∂ p ) s = ( ∂ v ∂ s ) p (from d h ) \left(\frac{\partial T}{\partial p}\right)_s = \left(\frac{\partial v}{\partial s}\right)_p \qquad \text{(from } dh\text{)} ( ∂ p ∂ T ​ ) s ​ = ( ∂ s ∂ v ​ ) p ​ (from d h ) ( ∂ s ∂ v ) T = ( ∂ p ∂ T ) v (from d f ) \left(\frac{\partial s}{\partial v}\right)_T = \left(\frac{\partial p}{\partial T}\right)_v \qquad \text{(from } df\text{)} ( ∂ v ∂ s ​ ) T ​ = ( ∂ T ∂ p ​ ) v ​ (from df ) ( ∂ s ∂ p ) T = − ( ∂ v ∂ T ) p (from d g ) \left(\frac{\partial s}{\partial p}\right)_T = -\left(\frac{\partial v}{\partial T}\right)_p \qquad \text{(from } dg\text{)} ( ∂ p ∂ s ​ ) T ​ = − ( ∂ T ∂ v ​ ) p ​ (from d g )

The last two are the useful ones in practice, because they express the change of entropy — unmeasurable — in terms of p p p , v v v and T T T derivatives that come straight from an equation of state or from tabulated data.

A memory aid

The relations pair T T T with s s s and p p p with v v v , always across the equality. The minus sign appears in the two relations where p p p and s s s sit on the same side, or equivalently in the first and fourth as written above.

The Tds Equations

Writing entropy as a function of two variables and substituting the Maxwell relations gives: T d s = c v d T + T ( ∂ p ∂ T ) v d v T\,ds = c_v\,dT + T\left(\frac{\partial p}{\partial T}\right)_v dv T d s = c v ​ d T + T ( ∂ T ∂ p ​ ) v ​ d v T d s = c p d T − T ( ∂ v ∂ T ) p d p T\,ds = c_p\,dT - T\left(\frac{\partial v}{\partial T}\right)_p dp T d s = c p ​ d T − T ( ∂ T ∂ v ​ ) p ​ d p

These are the working equations for computing entropy change for any substance, not merely an ideal gas. For an ideal gas, where p v = R T pv = RT p v = RT , they reduce to the familiar forms Δ s = c v ln ⁡ T 2 T 1 + R ln ⁡ v 2 v 1 = c p ln ⁡ T 2 T 1 − R ln ⁡ p 2 p 1 \Delta s = c_v\ln\frac{T_2}{T_1} + R\ln\frac{v_2}{v_1} = c_p\ln\frac{T_2}{T_1} - R\ln\frac{p_2}{p_1} Δ s = c v ​ ln T 1 ​ T 2 ​ ​ + R ln v 1 ​ v 2 ​ ​ = c p ​ ln T 1 ​ T 2 ​ ​ − R ln p 1 ​ p 2 ​ ​

Specific Heat Relations

From the Tds equations, the general relation between the two specific heats is c p − c v = − T ( ∂ v ∂ T ) p 2 ( ∂ p ∂ v ) T c_p - c_v = -T\left(\frac{\partial v}{\partial T}\right)_p^{2}\left(\frac{\partial p}{\partial v}\right)_T c p ​ − c v ​ = − T ( ∂ T ∂ v ​ ) p 2 ​ ( ∂ v ∂ p ​ ) T ​

or, in terms of the volume expansivity β \beta β and isothermal compressibility κ \kappa κ , c p − c v = T v β 2 κ c_p - c_v = \frac{T v \beta^2}{\kappa} c p ​ − c v ​ = κ T v β 2 ​

Three consequences worth stating explicitly, because each generates an objective item:

Since κ > 0 \kappa > 0 κ > 0 and β 2 ≥ 0 \beta^2 \geq 0 β 2 ≥ 0 , the right-hand side is never negative, so c p ≥ c v c_p \geq c_v c p ​ ≥ c v ​ always , for every substance.

As T → 0 T \to 0 T → 0 , the difference vanishes, so the two specific heats converge at absolute zero.

When β = 0 \beta = 0 β = 0 — as for liquid water near 4 degrees Celsius, where density is maximum — the two specific heats are equal .

For an ideal gas, β = 1 / T \beta = 1/T β = 1/ T and κ = 1 / p \kappa = 1/p κ = 1/ p , and the relation collapses to c p − c v = R c_p - c_v = R c p ​ − c v ​ = R .

The Clausius-Clapeyron Equation

During a phase change, pressure and temperature are not independent — they are linked by the saturation curve. Applying the third Maxwell relation across the two-phase region, where pressure depends only on temperature, gives d p d T = h f g T v f g \boxed{\frac{dp}{dT} = \frac{h_{fg}}{T\,v_{fg}}} d T d p ​ = T v f g ​ h f g ​ ​ ​

where h f g h_{fg} h f g ​ is the latent heat and v f g = v g − v f v_{fg} = v_g - v_f v f g ​ = v g ​ − v f ​ the change in specific volume. This is the slope of the phase boundary on a p p p - T T T diagram.

Consequences

For vaporisation , v f g v_{fg} v f g ​ is large and positive, so d p / d T dp/dT d p / d T is positive but modest. Boiling point rises with pressure — the principle of the pressure cooker and of the high-pressure boiler.

For fusion of most substances , v f g v_{fg} v f g ​ is small and positive, so the melting line is very steep.

For water freezing , v f g v_{fg} v f g ​ is negative because ice is less dense than water. So d p / d T dp/dT d p / d T is negative and the melting point falls as pressure rises. This anomaly, unique among common substances, explains why ice skates glide and why deep glacial ice can flow.

Simplified form

Far below the critical point, v g ≫ v f v_g \gg v_f v g ​ ≫ v f ​ and the vapour is nearly ideal, so v f g ≈ v g = R T / p v_{fg}\approx v_g = RT/p v f g ​ ≈ v g ​ = RT / p . Substituting and integrating gives ln ⁡ p 2 p 1 = h f g R ( 1 T 1 − 1 T 2 ) \ln\frac{p_2}{p_1} = \frac{h_{fg}}{R}\left(\frac{1}{T_1} - \frac{1}{T_2}\right) ln p 1 ​ p 2 ​ ​ = R h f g ​ ​ ( T 1 ​ 1 ​ − T 2 ​ 1 ​ )

which is how saturation pressure at one temperature is estimated from a known value at another.

The Joule-Thomson Coefficient

Throttling through a valve or porous plug is adiabatic and involves no work , so it is an isenthalpic process: h 1 = h 2 h_1 = h_2 h 1 ​ = h 2 ​ . Whether the gas cools or warms is measured by the Joule-Thomson coefficient : μ J T = ( ∂ T ∂ p ) h \mu_{JT} = \left(\frac{\partial T}{\partial p}\right)_h μ J T ​ = ( ∂ p ∂ T ​ ) h ​

Since pressure always falls on throttling ( d p < 0 dp < 0 d p < 0 ):

  • μ J T \mu_{JT} μ J T ​ Effect on throttling
  • Positive Temperature falls — cooling
  • Zero Temperature unchanged (inversion point)
  • Negative Temperature rises — heating

Using the Maxwell relations, the coefficient can be written entirely in measurable terms: μ J T = 1 c p [ T ( ∂ v ∂ T ) p − v ] \mu_{JT} = \frac{1}{c_p}\left[T\left(\frac{\partial v}{\partial T}\right)_p - v\right] μ J T ​ = c p ​ 1 ​ [ T ( ∂ T ∂ v ​ ) p ​ − v ]

The ideal-gas result

For an ideal gas, v = R T / p v = RT/p v = RT / p so T ( ∂ v / ∂ T ) p = v T(\partial v/\partial T)_p = v T ( ∂ v / ∂ T ) p ​ = v , and therefore μ J T = 0 \mu_{JT} = 0 μ J T ​ = 0

An ideal gas undergoes no temperature change on throttling. Any observed Joule-Thomson effect is a consequence of real-gas behaviour, and this is one of the cleanest demonstrations that real gases are not ideal.

The inversion curve

The locus of states where μ J T = 0 \mu_{JT} = 0 μ J T ​ = 0 is the inversion curve , and the highest temperature on it is the maximum inversion temperature . A gas cools on throttling only when it enters the valve below its inversion temperature.

  • Gas Approximate maximum inversion temperature
  • Carbon dioxide ~1500 K
  • Nitrogen ~620 K
  • Air ~600 K
  • Hydrogen ~200 K
  • Helium ~40 K

The practical implication is direct and important. Air and nitrogen are below their inversion temperatures at room temperature, so throttling cools them — which is the basis of the Linde liquefaction process and of the expansion valve in every vapour-compression refrigerator. Hydrogen and helium, however, are above their inversion temperatures at ambient conditions and therefore warm on throttling. They must first be pre-cooled, with liquid nitrogen for hydrogen and liquid hydrogen for helium, before throttling can be used to liquefy them at all.