Study guide
8.2 MARPOL Annex V: Garbage Management & Shipboard Waste
DG Shipping General Purpose Rating Final Exam India
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Introduction to Shipping, Ship Structure & Organization
1.1 Maritime Trade, Ship Types & Principal Dimensions 1.2 Shipboard Organization, Ranks & Trainee GP Rating Duties 1.3 Hull Structure, Compartments & Watertight Openings 1.4 Computer Operation, Shipboard IT Systems & Digital Basics
2 Chapter 2: Navigation Basics, Bridge Equipment & Watchkeeping
2.1 Bridge Layout, Compass, Helmsman Duties & Steering Orders 2.2 Lookout Duties, Night Vision & STCW Bridge Watchkeeping 2.3 IALA Maritime Buoyage System (Region A) & Basic COLREGs Lights/Shapes
3 Chapter 3: Anchor Work, Mooring Operations & Tug Safety
3.1 Ground Tackle: Anchors, Cables, Windlass & Hawse Pipe 3.2 Mooring Equipment, Lines & Deck Fittings 3.3 Mooring & Unmooring Operations, Snap-Back Zones & Tug Safety
4 Chapter 4: Cargo Handling Gear, Stowage & Hold Maintenance
4.1 Cargo Handling Appliances: Derricks, Cranes & Safe Working Load (SWL) 4.2 Cargo Hold Preparation, Dunnage & Hold Cleaning 4.3 Container Cargo, Bulk Cargoes & IMDG Code Awareness
5 Chapter 5: Seamanship, Ropes, Rigging & Deck Maintenance
5.1 Natural, Synthetic & Wire Ropes: Care, Coiling & Splicing 5.2 Seamanship Knots, Bends, Hitches & Block/Tackle Rigging 5.3 Deck Maintenance: Chipping, Wire-Brushing, Painting & Working Aloft/Overside
6 Chapter 6: Shipboard Safety, Safe Working Practices & Permits
6.1 Personal Protective Equipment (PPE) & Risk Assessment Onboard 6.2 Permit to Work Systems & Enclosed Space Entry 6.3 Hot Work Precautions, Electrical Safety on Deck & Gangway Watch
7 Chapter 7: STCW Basic Safety, Firefighting & Life Saving Appliances
7.1 Life-Saving Appliances: Lifejackets, Immersion Suits & Lifebuoys 7.2 Survival Craft: Lifeboats, Liferafts & Launching Appliances 7.3 Basic Firefighting Principles, Fire Triangle & Portable Extinguishers 7.4 Elementary First Aid, CPR, Bleeding Control & Medical Emergency Response
8 Chapter 8: Marine Pollution Prevention & MARPOL Regulations
8.1 MARPOL Overview & Annex I: Oil Pollution Prevention 8.2 MARPOL Annex V: Garbage Management & Shipboard Waste 8.3 Bunkering Procedures, SOPEP & Spill Response
9 Chapter 9: Engine Room Familiarization, Watchkeeping & Safety
9.1 Engine Room Layout, Bilges, Tank Tops & Trainee Ratings Duties 9.2 Engine Room Instrumentation, Alarms & Emergency Escapes 9.3 Quick-Closing Valves, Emergency Stops & Fire Dampers
10 Chapter 10: Marine Diesel Engines: Cycles, Components & Systems
10.1 Two-Stroke & Four-Stroke Marine Diesel Operating Principles 10.2 Main Engine Structural Components & Moving Parts 10.3 Engine Support Systems: Fuel Oil, Lubricating Oil & Starting Air 10.4 Engine Cooling Water Systems & Scavenge Fires
11 Chapter 11: Marine Auxiliary Machinery, Heat Exchangers & Boilers
11.1 Air Compressors, Compressed Air Receivers & Centrifugal Purifiers 11.2 Fresh Water Generators (Evaporators) & Heat Exchangers 11.3 Marine Boilers, Exhaust Gas Economizers & Steam Systems 11.4 Domestic Services, Refrigeration, Air Conditioning & Sewage Treatment
12 Chapter 12: Marine Pumps, Piping Systems, Valves & Steering Gear
12.1 Centrifugal & Positive Displacement Marine Pumps 12.2 Valves, Filters, Strainers & Pipeline Identification 12.3 Bilge, Ballast & Oily Water Separator (OWS) Systems 12.4 Steering Gear Systems & Emergency Steering Procedures 12.5 Shipboard Plumbing Repairs, Pipe Clamping & Pipeline Maintenance
13 Chapter 13: Workshop Tools, Fitting, Hot Work & Electrical Safety
13.1 Workshop Hand Tools, Fitting Practices & Precision Measurement 13.2 Power Tools, Grinding, Drilling & Safe Workshop Operations 13.3 Gas Welding, Electric Arc Welding & Hot Work Safety 13.4 Electrical Safety, Isolation, LOTO & Hazards in Machinery Spaces 13.5 Lathe Machine Operations, Centering & Fabrication 13.6 Shipboard Carpentry, Woodworking & Cement Box Emergency Repairs
14 Chapter 14: Engine Room Firefighting, Fixed Systems & Emergency Response
14.1 Machinery Space Fire Hazards & Flammable Liquids Management 14.2 Fixed Fire-Extinguishing Systems: CO2, Water Mist & Hi-Expansion Foam 14.3 Emergency Procedures: Blackout, Flooding, Abandon Ship & Engine Room Safety Drills
8.2 MARPOL Annex V: Garbage Management & Shipboard Waste
Key Takeaways Explain This Topic AI
Under MARPOL Annex V, the discharge of any plastics—including synthetic ropes, plastic garbage bags, styrofoam, and incinerator ashes from plastic goods—is subject to an absolute, worldwide zero-discharge ban.
Outside Special Areas and Arctic waters, ground food waste capable of passing a 25 mm screen may be discharged en route, as far as practicable and at least 3 NM from land; unground food requires at least 12 NM.
Where Special Area requirements apply, ground food waste requires at least 12 NM and en-route discharge. Non-HME deck washwater and hold washwater meeting all regulation 6.1.2 conditions have separate permissions; other garbage remains prohibited.
A Garbage Management Plan is required for ships of 100 GT and above, ships certified for 15 or more persons, and fixed/floating platforms. Since 1 May 2024, the GRB tonnage threshold is 100 GT, with the separate 15-person voyage and platform provisions; retain the GRB and reception receipts for two years after its last entry.
Segregate waste according to the ship’s Garbage Management Plan and clearly marked receptacles. Bin colors may differ between ships; never identify a waste stream by an assumed universal color.
Last updated: November 2026
8.2 MARPOL Annex V: Garbage Management & Shipboard Waste
Solid waste generated on board ships represents a major environmental hazard to oceanic and coastal ecosystems. Discarded plastics, synthetic packaging, and lost fishing gear do not biodegrade; instead, they persist for decades, degrading into toxic microplastics, suffocating coral reefs, entangling marine mammals, and poisoning fish and seabirds. In 2013, the IMO brought into force comprehensive revisions to MARPOL Annex V (Prevention of Pollution by Garbage from Ships) , shifting the international regulatory philosophy from a regime where garbage disposal at sea was generally permitted with specific prohibitions, to a strict regime where all garbage discharge into the sea is completely prohibited unless explicitly permitted .
Trainee General Purpose (GP) Ratings bear direct, hands-on responsibility for garbage collection, sorting, compacting, and disposal across the galley, crew mess rooms, accommodation, and open deck maintenance stations. Ratings must know exactly what may be discharged, where it may be discharged, and what must be strictly held on board for shore reception.
1. Scope, Definitions, and the Absolute Global Ban on Plastics
Under MARPOL Annex V, Garbage is defined as all kinds of food wastes, domestic wastes, operational wastes, all plastics, cargo residues, incinerator ashes, cooking oil, fishing gear, and animal carcasses generated during the normal operation of the ship and liable to be disposed of continuously or periodically. Garbage does not include fresh fish and parts thereof generated by fishing activities, or substances covered by other MARPOL Annexes (such as mineral oil under Annex I or raw sewage under Annex IV).
The Absolute Global Ban on Plastics
MARPOL Annex V establishes an uncompromising, worldwide prohibition on discharging plastics into the sea. Discharging any plastic into the marine environment is strictly banned everywhere, at all times, without exception , whether inside or outside Special Areas, regardless of distance from land or vessel speed:
- Synthetic ropes, polypropylene mooring lines, nylon hawser off-cuts, and plastic wire cores;
- Synthetic fishing nets and monofilament lines;
- Plastic garbage bags, stretch film, shrink wrap, and plastic strapping bands;
- Polystyrene foam (Styrofoam) cups, takeaway containers, and packaging foam pellets;
- Plastic drink bottles, disposable cutlery, plates, cups, and food wrappers;
Incinerator ashes resulting from burning plastic products or PVC cables.
Warning
Incinerator Restrictions : MARPOL Annex VI Regulation 16 prohibits burning PCBs and the other listed prohibited materials. PVC may be burned only in an incinerator with the required IMO type approval. Burn only materials permitted by the incinerator’s instructions and the ship’s procedures. Retain all incinerator ash for shore reception; do not discharge it at sea.
2. Statutory Discharge Table for Non-Plastic Wastes
For non-plastic garbage, MARPOL Annex V permits limited discharges into the sea under strict conditions governing vessel operational state, comminution (grinding), and distance from the nearest land.
Waste Category Outside Special Areas and Arctic Waters Within Effective Special Areas (additional Polar Code rules apply in polar waters)
All Plastics (synthetic cordage, plastic bags, styrofoam, bottles) STRICTLY PROHIBITED EVERYWHERE STRICTLY PROHIBITED EVERYWHERE
Food waste comminuted / ground (capable of passing through a screen with mesh size < 25 mm < 25\text{ mm} < 25 mm ) Permitted at ≥ 3 Nautical Miles (NM) \ge 3\text{ Nautical Miles (NM)} ≥ 3 Nautical Miles (NM) from nearest land while ship is en route Permitted at ≥ 12 Nautical Miles (NM) \ge 12\text{ Nautical Miles (NM)} ≥ 12 Nautical Miles (NM) from nearest land or ice shelf while ship is en route
Food waste unground / non-comminuted (whole food scraps, fruit rinds, bones) Permitted at ≥ 12 Nautical Miles (NM) \ge 12\text{ Nautical Miles (NM)} ≥ 12 Nautical Miles (NM) from nearest land while ship is en route STRICTLY PROHIBITED (must be retained onboard)
Cargo residues (non-Harmful to Marine Environment / non-HME) Only residues not recoverable by commonly available unloading methods; en route, as far as practicable and at least 12 NM from nearest land Only residues in hold washwater, under all regulation 6.1.2 conditions described below; en route and at least 12 NM from nearest land or ice shelf
Cargo residues (Harmful to Marine Environment / HME) STRICTLY PROHIBITED (discharge to shore reception facilities only) STRICTLY PROHIBITED (discharge to shore reception facilities only)
Cleaning agents and additives in cargo hold washwater (non-HME) Permitted if non-HME; if cargo residues are present, the applicable residue conditions also apply Subject to all regulation 6.1.2 conditions described below, including at least 12 NM from nearest land or ice shelf
Cleaning agents in deck wash water Permitted if certified non-harmful to marine environment Permitted if certified non-harmful to marine environment
Domestic wastes (paper, cardboard, glass, metal cans, crockery) STRICTLY PROHIBITED (retain for shore reception or approved incineration) STRICTLY PROHIBITED (retain for shore reception or approved incineration)
Cooking oil STRICTLY PROHIBITED (retain for shore reception facilities) STRICTLY PROHIBITED (retain for shore reception facilities)
Incinerator ash STRICTLY PROHIBITED (retain for shore reception facilities) STRICTLY PROHIBITED (retain for shore reception facilities)
Animal carcasses En route and as far from nearest land as possible; IMO guidance recommends more than 100 NM and maximum available water depth, with treatment so carcasses sink STRICTLY PROHIBITED
Special Areas Under MARPOL Annex V
The designated Special Areas under MARPOL Annex V are:
- Mediterranean Sea area
- Baltic Sea area
- Black Sea area
- Red Sea area
- "Gulfs" area (Persian / Arabian Gulf)
- North Sea area
- Antarctic area (south of 60 ∘ S 60^\circ\text{ S} 6 0 ∘ S )
- Wider Caribbean region (including the Gulf of Mexico and Caribbean Sea)
Where Special Area requirements are effective, ground food waste may be discharged only en route, as far as practicable and at least 12 NM from land or ice shelf. Non-HME deck washwater is also allowed. Hold washwater requires unrecoverable non-HME residues and non-HME agents, both ports within the same Special Area, no transit outside it, and no adequate reception at either port; discharge must be en route, as far as practicable and at least 12 NM from land or ice shelf. Red Sea requirements took effect on 1 January 2025. Designation alone does not activate Special Area discharge rules; additional Polar Code rules apply in polar waters.
Fixed and Floating Platforms
Fixed or floating drilling rigs and production platforms operating at distances exceeding 12 NM 12\text{ NM} 12 NM from the nearest land, and all ships moored alongside or within 500 meters of them, are subject to special restrictions: the only permitted discharge into the sea is food waste that has passed through a food grinder or comminuter with screen openings no greater than 25 mm 25\text{ mm} 25 mm . Discharging unground food waste or any other garbage from offshore platforms is completely prohibited.
3. Statutory Shipboard Documents and Placards
To ensure crew and passengers comply with Annex V, MARPOL requires specific operational hardware and statutory documentation on merchant ships:
1. Garbage Placards
Application : Mandatory for every ship of 12 meters 12\text{ meters} 12 meters or more in length overall (LOA) and on all fixed/floating offshore platforms.
Purpose : Durable display placards notifying the crew and passengers of the legal garbage discharge prohibitions and disposal requirements.
Placement : Prominently displayed in working and living areas where garbage is generated, including crew mess rooms, officers' dining saloons, galleys, navigation bridge, engine control room, and main deck garbage storage lockers.
Language : Written in the official working language of the ship's crew, and on ships engaged in international voyages, accompanied by English, French, or Spanish.
2. Garbage Management Plan (GMP)
Application : Mandatory for every ship of 100 Gross Tonnage (GT) 100\text{ Gross Tonnage (GT)} 100 Gross Tonnage (GT) and above , every ship certified to carry 15 or more persons , and all fixed or floating platforms.
Content : A written operational manual approved by the company that outlines clear shipboard procedures for waste minimization, collection, separation, compacting, shredding, onboard storage, and statutory disposal.
Designated Officer : Formally designates the officer in charge of coordinating the plan (usually the Chief Officer on deck and the Second Engineer in engine spaces).
3. Garbage Record Book (GRB)
Application : Since 1 May 2024, mandatory for every ship of 100 Gross Tonnage (GT) 100\text{ Gross Tonnage (GT)} 100 Gross Tonnage (GT) and above , every ship certified to carry 15 or more persons engaged in voyages to another MARPOL Party’s ports or offshore terminals, and every fixed or floating platform.
Structure (IMO Two-Part Format) :
Part I : Applies to all vessels. Records discharges to sea, discharges to port reception facilities or barges, incinerations, and accidental losses of garbage categories A through I (Plastics, Food, Domestic, Cooking Oil, Incinerator Ash, Operational Waste, Animal Carcasses, Fishing Gear, and Electronic Waste [E-Waste]).
Part II : Applies to vessels carrying solid bulk cargoes (such as bulk carriers). Records discharges and cargo hold washings of Category J (non-HME cargo residues) and Category K (HME cargo residues).
Logging Details : Every operation must be logged with the date, time, vessel position (latitude and longitude or port name), garbage category letter, estimated volume discharged or incinerated in cubic meters ( m 3 m^3 m 3 ), and signed by the officer in charge of the operation.
Master's Endorsement : The Master must inspect and sign each completed page of the Garbage Record Book.
Retention Period : The completed Garbage Record Book must be kept onboard the ship for a minimum period of two (2) years following the date of the last entry, alongside shore reception facility waste-delivery receipts. Bunker delivery notes have a separate three-year retention period after delivery.
4. Shipboard Waste Segregation and Color Coding
Segregate garbage at the point of generation using the ship’s Garbage Management Plan and the labels on its receptacles. Colors are ship-specific, not a universal MARPOL code. The following diagram is one example only; use the actual labels in the galley, workshops, mess rooms and engine spaces: +-----------------------------------------------------------------------------------------+
- | SHIPBOARD WASTE SEGREGATION STATIONS |
- +-------------------+--------------------+--------------------+---------------------------+
- | RED BIN | GREEN BIN | BLUE BIN | YELLOW BIN |
- | (Plastics) | (Food Waste) | (Domestic & Paper) | (Hazardous & Oily) |
- +-------------------+--------------------+--------------------+---------------------------+
- | - Plastic bottles | - Fruit / veg peels| - Office paper | - Oily cotton rags |
- | - Synthetic rope | - Meat / fish scraps - Cardboard boxes | - Used oil filters |
- | - Bubble wrap | - Leftover food | - Glass bottles | - Chemical / paint cans |
- | - Plastic bags | - Bread rinds | - Clean tin cans | - Aerosol spray canisters |
- +-------------------+--------------------+--------------------+---------------------------+
- | DISPOSAL: | DISPOSAL: | DISPOSAL: | DISPOSAL: |
- | Shore facility | Comminuter or | Shore facility or | Shore hazardous facility |
- | ONLY (Never sea) | discharge at sea | approved onboard | ONLY (Never sea / no open |
- | | per distance rules | incinerator | burning) |
- +-------------------+--------------------+--------------------+---------------------------+
Note
Food Waste Grinders (Comminuters) : Galley food waste comminuters grind scraps down to particles smaller than 25 mm 25\text{ mm} 25 mm using high-speed revolving cutter plates flushed with salt water. GP Ratings operating comminuters must ensure no plastic wrappers, plastic toothpicks, cutlery, bones exceeding grinder capacity, or dishcloths accidentally fall into the grinder hopper, as foreign objects can shatter the grinding teeth and result in illegal plastic contamination.