Study guide
6.2 Permit to Work Systems & Enclosed Space Entry
DG Shipping General Purpose Rating Final Exam India
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Introduction to Shipping, Ship Structure & Organization
1.1 Maritime Trade, Ship Types & Principal Dimensions 1.2 Shipboard Organization, Ranks & Trainee GP Rating Duties 1.3 Hull Structure, Compartments & Watertight Openings 1.4 Computer Operation, Shipboard IT Systems & Digital Basics
2 Chapter 2: Navigation Basics, Bridge Equipment & Watchkeeping
2.1 Bridge Layout, Compass, Helmsman Duties & Steering Orders 2.2 Lookout Duties, Night Vision & STCW Bridge Watchkeeping 2.3 IALA Maritime Buoyage System (Region A) & Basic COLREGs Lights/Shapes
3 Chapter 3: Anchor Work, Mooring Operations & Tug Safety
3.1 Ground Tackle: Anchors, Cables, Windlass & Hawse Pipe 3.2 Mooring Equipment, Lines & Deck Fittings 3.3 Mooring & Unmooring Operations, Snap-Back Zones & Tug Safety
4 Chapter 4: Cargo Handling Gear, Stowage & Hold Maintenance
4.1 Cargo Handling Appliances: Derricks, Cranes & Safe Working Load (SWL) 4.2 Cargo Hold Preparation, Dunnage & Hold Cleaning 4.3 Container Cargo, Bulk Cargoes & IMDG Code Awareness
5 Chapter 5: Seamanship, Ropes, Rigging & Deck Maintenance
5.1 Natural, Synthetic & Wire Ropes: Care, Coiling & Splicing 5.2 Seamanship Knots, Bends, Hitches & Block/Tackle Rigging 5.3 Deck Maintenance: Chipping, Wire-Brushing, Painting & Working Aloft/Overside
6 Chapter 6: Shipboard Safety, Safe Working Practices & Permits
6.1 Personal Protective Equipment (PPE) & Risk Assessment Onboard 6.2 Permit to Work Systems & Enclosed Space Entry 6.3 Hot Work Precautions, Electrical Safety on Deck & Gangway Watch
7 Chapter 7: STCW Basic Safety, Firefighting & Life Saving Appliances
7.1 Life-Saving Appliances: Lifejackets, Immersion Suits & Lifebuoys 7.2 Survival Craft: Lifeboats, Liferafts & Launching Appliances 7.3 Basic Firefighting Principles, Fire Triangle & Portable Extinguishers 7.4 Elementary First Aid, CPR, Bleeding Control & Medical Emergency Response
8 Chapter 8: Marine Pollution Prevention & MARPOL Regulations
8.1 MARPOL Overview & Annex I: Oil Pollution Prevention 8.2 MARPOL Annex V: Garbage Management & Shipboard Waste 8.3 Bunkering Procedures, SOPEP & Spill Response
9 Chapter 9: Engine Room Familiarization, Watchkeeping & Safety
9.1 Engine Room Layout, Bilges, Tank Tops & Trainee Ratings Duties 9.2 Engine Room Instrumentation, Alarms & Emergency Escapes 9.3 Quick-Closing Valves, Emergency Stops & Fire Dampers
10 Chapter 10: Marine Diesel Engines: Cycles, Components & Systems
10.1 Two-Stroke & Four-Stroke Marine Diesel Operating Principles 10.2 Main Engine Structural Components & Moving Parts 10.3 Engine Support Systems: Fuel Oil, Lubricating Oil & Starting Air 10.4 Engine Cooling Water Systems & Scavenge Fires
11 Chapter 11: Marine Auxiliary Machinery, Heat Exchangers & Boilers
11.1 Air Compressors, Compressed Air Receivers & Centrifugal Purifiers 11.2 Fresh Water Generators (Evaporators) & Heat Exchangers 11.3 Marine Boilers, Exhaust Gas Economizers & Steam Systems 11.4 Domestic Services, Refrigeration, Air Conditioning & Sewage Treatment
12 Chapter 12: Marine Pumps, Piping Systems, Valves & Steering Gear
12.1 Centrifugal & Positive Displacement Marine Pumps 12.2 Valves, Filters, Strainers & Pipeline Identification 12.3 Bilge, Ballast & Oily Water Separator (OWS) Systems 12.4 Steering Gear Systems & Emergency Steering Procedures 12.5 Shipboard Plumbing Repairs, Pipe Clamping & Pipeline Maintenance
13 Chapter 13: Workshop Tools, Fitting, Hot Work & Electrical Safety
13.1 Workshop Hand Tools, Fitting Practices & Precision Measurement 13.2 Power Tools, Grinding, Drilling & Safe Workshop Operations 13.3 Gas Welding, Electric Arc Welding & Hot Work Safety 13.4 Electrical Safety, Isolation, LOTO & Hazards in Machinery Spaces 13.5 Lathe Machine Operations, Centering & Fabrication 13.6 Shipboard Carpentry, Woodworking & Cement Box Emergency Repairs
14 Chapter 14: Engine Room Firefighting, Fixed Systems & Emergency Response
14.1 Machinery Space Fire Hazards & Flammable Liquids Management 14.2 Fixed Fire-Extinguishing Systems: CO2, Water Mist & Hi-Expansion Foam 14.3 Emergency Procedures: Blackout, Flooding, Abandon Ship & Engine Room Safety Drills
6.2 Permit to Work Systems & Enclosed Space Entry
Key Takeaways Explain This Topic AI
A Permit to Work (PTW) records the task, hazards, controls and validity. Under MSC.581(110), enclosed-space entry permits have a risk-based duration never longer than eight hours; changed conditions require stopping and reassessment.
Shipboard enclosed spaces present deadly hazards from oxygen deficiency (caused by steel corrosion, cargo decomposition, or inert gas displacement) and toxic gases like Hydrogen Sulphide ( H 2 S H_2S H 2 S ) and Carbon Monoxide ( C O CO CO ).
Thoroughly ventilate and test before routine entry: 20.9% oxygen, CO₂ below 0.5%, flammables below 1% LFL where relevant, and toxic gases below 50% of the applicable OEL. Maintain ventilation during occupancy; leave if it fails or conditions deteriorate.
A dedicated standby attendant stationed continuously at the entrance must never enter the space during an emergency, but must immediately raise the general alarm and prepare extraction equipment for the rescue team.
SOLAS Regulation III/19 mandates enclosed space entry and rescue drills aboard all merchant vessels at intervals not exceeding two months.
Last updated: November 2026
6.2 Permit to Work Systems & Enclosed Space Entry
Enclosed space entry represents one of the most hazardous operations conducted aboard merchant ships. Historically, catastrophic atmospheric incidents in cargo holds, ballast tanks, and double bottoms have claimed the lives of countless seafarers—not only the original entrants who succumbed to invisible toxic gases or oxygen-depleted atmospheres, but also untrained would-be rescuers who rushed inside without breathing protection. SOLAS Regulation III/19 requires enclosed-space training and drills. IMO Resolution MSC.581(110) provides the current Revised Recommendations for Entering Enclosed Spaces Aboard Ships . Apply these recommendations through the ship’s SMS and applicable flag-state requirements. Trainee General Purpose (GP) Ratings must understand the operational structure of the Permit to Work (PTW) system, enclosed space hazards, multi-gas testing protocols, entrance safety staging, and emergency standby attendant duties.
1. The Permit to Work (PTW) System
A Permit to Work (PTW) is a formal written safety management document that authorizes designated personnel to carry out specific, potentially high-risk tasks within defined safety boundaries, locations, and timeframes. A PTW is not merely a piece of paper; it represents an auditable verification that all hazards have been identified, physical isolations completed, atmospheric conditions verified, and emergency countermeasures staged.
- Key Roles in the PTW System MASTER / COMPANY-AUTHORIZED RESPONSIBLE PERSON
- Authorizes entry after verifying the safety arrangements
- |
- COMPETENT PERSON AND TRAINED ATMOSPHERE TESTER
- Assess the hazards, inspect the space and conduct tests
- |
- WORK SUPERVISOR, WORK PARTY AND OUTSIDE ATTENDANT
- Follow the permit, monitor conditions and maintain contact
Entry Authorization : The Master or a responsible person nominated by the Master authorizes entry. MSC.581(110) describes the responsible person as company-authorized at management level: Master, Chief Mate, Chief Engineer or Second Engineer.
Competent Person : Has operational competence to assess whether a dangerous atmosphere is present or could develop. Competence depends on training and ability, not simply the title Bosun or Fitter.
Atmosphere Tester : Is trained in the selected instruments, sampling methods and manufacturers’ instructions. Uses calibrated equipment before entry and at the required intervals.
Supervisor and Work Party : Understand the risk assessment, isolations, permit conditions, PPE and evacuation signals. Record the required acknowledgments under the SMS; keep an instructed attendant outside while the team is inside.
Validity and Revalidation Rules
Permit Duration : Every PTW states its validity under the SMS. For enclosed-space entry , MSC.581(110) recommends a risk-based period never longer than eight hours . A general PTW maximum of 24 hours does not extend this entry-permit limit.
Mandatory Suspension : A permit is automatically suspended if:
Work stops for meal breaks, rest periods, or shift handovers.
The ship's general emergency alarm or fire alarm sounds.
Atmospheric testing reveals any adverse change in gas levels.
Environmental or weather conditions deteriorate (e.g., heavy ship motion, toxic gas drift from cargo vents).
Re-entry : After a break, re-test the atmosphere, verify acceptable results and record them before re-entry. If the space was left unattended, the entry permit is void: re-inspect and issue a new permit. Ventilation failure or changed checklist conditions also invalidate the permit; stop work, leave the space and reassess before authorizing entry again.
2. Enclosed Space Hazards and Definitions
Under MSC.581(110) , an Enclosed Space may contain a hazardous atmosphere or lack oxygen and has any of the following characteristics:
- Limited openings for entry and exit;
- Inadequate or non-existent natural ventilation;
Not designed or intended for continuous worker occupancy.
Identify spaces in the ship’s enclosed-space register. Treat spaces connected to a hazardous space as hazardous until tested; assess adjacent spaces for possible leakage through their common boundary.
- Common Shipboard Enclosed Spaces
- Ballast water tanks (forepeak, afterpeak, double bottom, and topside wing tanks)
- Cargo holds and cargo tanks (crude oil, product, chemical, or liquefied gas tanks)
- Fuel oil bunker tanks, diesel oil settling/service tanks, and lube oil sump tanks
- Cofferdams (void spaces isolating fuel tanks from cargo spaces or fresh water tanks)
- Chain lockers (anchor chain storage compartments forward)
- Duct keels (tunnel-like structural pipe passages running longitudinally along the ship's bottom)
- Sewage retention tanks, grey water tanks, and bilge collection wells
- Inert gas scrubbers and boiler exhaust uptakes
Deadly Atmospheric Hazards +---------------------------------------------------------------------------------------------------+
- | ENCLOSED SPACE ATMOSPHERIC HAZARDS |
- +---------------------------------+---------------------------------+-------------------------------+
- | OXYGEN DEFICIENCY | TOXIC GASES | FLAMMABLE GASES |
- | - Steel rusting (corrosion) | - Hydrogen Sulphide (H2S) | - Hydrocarbon fuel vapors |
- | - Organic cargo decomposition | - Carbon Monoxide (CO) | - Volatile organic cargo gas |
- | - Inert Gas (N2, CO2) purging | - Nitrogen dioxide (NO2) | - Explosive range: |
- | - Safe level: exactly 20.9% | - Toxic at hazardous concentrations | between LEL and UEL |
- +---------------------------------+---------------------------------+-------------------------------+
Oxygen Depletion :
Ambient fresh air contains 20.9 % 20.9\% 20.9% oxygen by volume, 78.1 % 78.1\% 78.1% nitrogen, and 1 % 1\% 1% argon/trace gases.
Causes of Oxygen Depletion : Chemical oxidation of unpainted structural steel (iron rusting consumes immense quantities of O 2 O_2 O 2 in closed ballast tanks and chain lockers); microbial decomposition of organic cargo residues (grain, seeds, timber, coal, fishmeal); displacement by Inert Gas (nitrogen or boiler flue gas containing < 5 % O 2 < 5\% O_2 < 5% O 2 ); or drying of fresh paint and linseed oils.
Physiological Impact : Reduced oxygen impairs judgment, coordination and physical performance; severe deficiency can cause unconsciousness, irreversible injury and death. The effects depend on concentration, exposure and exertion. Symptoms are not a warning system: never enter to “see how it feels”; rely on representative instrument testing and the entry procedure.
Toxic Gases :
Hydrogen Sulphide ( H 2 S H_2S H 2 S ) : Produced by anaerobic bacterial decay in sewage holding tanks, stagnant bilge water, sour crude oil, and organic cargo residues. Highly toxic and heavier than air. It may smell like rotten eggs at low concentrations, but the sense of smell rapidly fatigues and cannot warn reliably of continuing exposure. 100 ppm is immediately dangerous to life and health , not an instant-death threshold. Much higher concentrations can cause rapid collapse and fatal respiratory failure. Test for H₂S; never rely on smell.
Carbon Monoxide ( C O CO CO ) : A colorless, odorless, and tasteless toxic gas generated by incomplete combustion of fuel, smoldering cargo, or exhaust back-drafts. It binds to human hemoglobin over 200 times more readily than oxygen, forming carboxyhemoglobin and causing cellular suffocation.
Flammable and Explosive Atmospheres :
Hydrocarbon vapors from cargo or fuel leaks mixed with air. An explosion occurs if a spark is introduced when the vapor concentration lies between the Lower Explosive Limit (LEL) and Upper Explosive Limit (UEL) .
3. Mandatory Entry Preparation & Atmospheric Testing Protocols
Routine entry requires completed risk assessment, isolations, ventilation, atmospheric tests, authorization and rescue preparations. A known or suspected unsafe atmosphere requires the additional section 9 precautions, trained personnel and suitable breathing apparatus; a trainee must never enter it on their own initiative.
Thorough Ventilation
Method : Ventilate thoroughly by natural or mechanical means appropriate to the space and its hazards. Opening a manhole alone does not prove the atmosphere safe. Where fans are needed, use equipment suitable for the hazardous area.
Air Distribution : Arrange inlet, outlet and any ducts to sweep the working areas and remote pockets; structural members or cargo can obstruct airflow.
Duration : There is no universal 24-hour ventilation period. Continue until representative testing and the risk assessment establish acceptable conditions.
During Occupancy : Maintain ventilation throughout entry. If it fails, everyone must leave immediately. Re-test and record acceptable conditions before re-entry after a break.
Caution
NEVER use pure compressed oxygen to ventilate an enclosed space! Oxygen enrichment greatly increases fire risk: materials ignite more readily and burn fiercely. Use the approved fresh-air ventilation arrangement, never oxygen cylinders.
Multi-Level Atmospheric Testing
Atmospheric testing must be conducted by a person trained in the equipment and sampling procedure , using suitable certified, calibrated instruments. Remote sampling with a pump and hose allows testing before entry; follow the manufacturer’s sampling and response times. +------------------- MANHOLE ENTRANCE -------------------+
- | |
- | [TEST POINT 1: TOP] <- Methane (lighter gas) |
- | |
- | [TEST POINT 2: MIDDLE] <- Oxygen-depleted zones |
- | |
- | [TEST POINT 3: BOTTOM] <- H2S, Hydrocarbons (heavy)|
- +--------------------------------------------------------+
Pre-Test Ventilation Pause : Mechanical ventilation must be stopped approximately 10 minutes before testing to allow the compartment atmosphere to stabilize and prevent false fresh-air readings around the blower outlet.
Multi-Level Sampling (Top, Middle, Bottom) :
Gases exhibit different vapor densities relative to air ( 1.0 1.0 1.0 ):
Methane ( 0.55 0.55 0.55 ) is lighter than air and tends to rise. Carbon monoxide ( 0.97 0.97 0.97 ) has nearly air's density and mixes readily; do not assume it forms an upper layer.
Hydrogen sulphide ( 1.19 1.19 1.19 ) and heavy petroleum hydrocarbon vapors ( 1.5 to 3.5 1.5\text{ to }3.5 1.5 to 3.5 ) are substantially heavier than air and sink to the bottom bilges and lower floor plates.
Sample top, middle and bottom , and as many additional areas or openings as needed to obtain representative readings, including remote or obstructed pockets. Do not assume three readings at one hatch represent the entire space.
Recommended Atmospheric Criteria for Routine Entry
Under MSC.581(110), paragraph 7.4 , obtain steady representative readings after risk assessment. Meet the applicable national requirements and all other entry controls; readings alone do not authorize entry.
Atmospheric Parameter IMO Recommended Criterion Action if Not Met
Oxygen ( O 2 O_2 O 2 ) 20.9 % 20.9\% 20.9% by volume Do not authorize routine entry; investigate and ventilate.
Carbon Dioxide ( C O 2 CO_2 C O 2 ) Below 0.5 % 0.5\% 0.5% by volume ( 5 , 000 5,000 5 , 000 ppm) Do not authorize routine entry; remove the source and ventilate.
Flammable Gases/Vapours Below 1 % 1\% 1% LFL , where the assessment identifies a potential flammable atmosphere Do not authorize routine entry; control the source, ventilate and re-test.
Toxic Gases/Vapours , including H₂S and CO Below 50 % 50\% 50% of each applicable occupational exposure limit (OEL) Do not authorize routine entry; apply the space-specific controls and re-test.
- 4. Entrance Staging Equipment & Standby Attendant Duties
- Equipment Staged at the Entrance
Before entry, position, inspect and test the equipment specified in the ship-specific rescue plan , ready for immediate use. Typical items include:
SCBA : Fully charged approved sets, with sufficient capacity and spares for the designated rescue team. Check masks, valves and cylinder pressures.
Emergency Escape Breathing Devices (EEBD) : Where specified for escape; an EEBD must never be used to enter for rescue.
Extraction Gear : Suitable harnesses, lifelines and a rated recovery hoist; a tripod and rescue winch may suit a vertical manhole. Verify the planned route and lifting arrangement.
Rescue Stretcher : A suitable stretcher, such as a Neil Robertson or Paraguard, with a practised method of passing through the actual access openings.
Resuscitation Equipment : First-aid and medical oxygen equipment, with trained users ready to receive the casualty.
Lighting and Communication : Equipment suitable for the atmosphere; agree and test contact methods and evacuation signals before entry.
Personal Gas Detection : Calibrated, tested instruments monitoring oxygen, CO₂, flammables, toxic gases including CO, and other gases identified in the assessment.
The Dedicated Standby Person (Attendant)
A fully trained seafarer must be stationed permanently outside the manhole entrance throughout the entire entry operation.
Continuous Station : The standby attendant must never leave the entrance for any reason while personnel are inside the space.
Communication : Maintain contact by the agreed, tested method and at the intervals set in the entry plan. All participants must understand evacuation and emergency signals; do not assume a universal rope-tug code. If contact is lost, initiate the agreed emergency procedure immediately.
Entry Log : Records the exact names, entry times, personal gas readings, and exit times of every entrant.
The Golden Rule of Enclosed Space Rescue
Caution
IF AN ENTRANT COLLAPSES OR BECOMES UNRESPONSIVE INSIDE THE ENCLOSED SPACE, THE STANDBY ATTENDANT MUST NEVER ENTER THE SPACE UNDER ANY CIRCUMSTANCES! IMO warns that improvised rescue attempts have created further casualties. Follow the ship’s rescue plan; the attendant must not rush inside or attempt an independent rescue. Immediate actions are:
- Immediately sound the ship's General Emergency Alarm and notify the Bridge / Duty Officer;
- Maintain the ventilation arrangement specified in the rescue plan;
- Prepare the planned recovery and resuscitation equipment at the entrance;
Stand by at the hatch and await the designated shipboard emergency rescue team wearing SCBA.
5. SOLAS Emergency Drill Frequency
Under SOLAS Chapter III, Regulation 19.3.3 , crew members with enclosed space entry or rescue responsibilities must participate in an enclosed space entry and rescue drill onboard the ship at least once every two months .
Drill Requirements : Checking and wearing of personal protective equipment; testing multi-gas detection instruments; demonstrating communication protocols; testing rescue stretcher extraction via tripod and winch; and performing casualty resuscitation techniques.