Study guide

8.3 Surface Area and Volume of Cubes, Cuboids, Cylinders, Cones, Spheres & Melting-Recasting Solids

RRB Section Controller 2026: Free Written CBT Study Guide Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Exam Overview & Operational Profile

1.1 Written CBT Pattern, Scoring & Selection 1.2 Eligibility, Documents & A-2 Medical Requirements

2 Chapter 2: Number Systems & Arithmetic Foundations

2.1 Number Systems, Divisibility Rules, Prime Factorization & Remainder Theorem 2.2 Unit Digits, Cyclicity Rules & Power Modulo Calculations 2.3 HCF and LCM Properties, Prime Factorization & Practical Word Problems 2.4 Fractions, Decimals, Surds, Indices & BODMAS Simplification

3 Chapter 3: Commercial Arithmetic: Percentages, Profit & Rates

3.1 Percentages, Fractional Equivalents, Successive Variations & Population Formulas 3.2 Cost Price, Selling Price, Profit/Loss Percentage, Dishonest Dealer & Discount Schemes 3.3 Simple Interest, Compound Interest Formulas, Annual/Semi-Annual Compounding & Difference Traps

4 Chapter 4: Ratios, Proportions, Mixtures & Partnerships

4.1 Ratios, Duplicate/Sub-Duplicate Ratios, Direct and Inverse Variations & Proportional Sharing 4.2 Averages, Change in Average, Batsman/Bowling Averages & Replacement Problems 4.3 Rule of Alligation, Removal-Replacement Mixtures & Partnership Capital-Time Sharing

5 Chapter 5: Motion Dynamics, Time, Distance & Train Logistics

5.1 Time, Speed, Distance Relations, Average Speed & Unit Conversions 5.2 Train Problems: Passing Poles, Platforms, Moving Objects & Relative Speed in Opposite/Same Directions 5.3 Upstream, Downstream Boat Velocity, Still Water Speed & Circular Track Races

6 Chapter 6: Work Efficiency, Pipes & Operational Scheduling

6.1 Individual and Group Work, Efficiency Ratios, Work Equivalences & Mandays Formula 6.2 Alternate Day Working, Negative Work & Wage Distribution Based on Work Done 6.3 Inlet and Outlet Pipes, Net Filling Rate, Alternating Flow & Tank Leakage Problems

7 Chapter 7: Algebra, Linear Equations & Progressions

7.1 Algebraic Identities, Polynomial Factorization & Systems of Linear Equations in Two Variables 7.2 Quadratic Equations, Nature of Roots, Discriminant Analysis & Maximum/Minimum Values 7.3 Arithmetic Progressions (AP), General Term, Sum of n Terms & Sequence Modeling

8 Chapter 8: Mensuration: 2D Areas & 3D Solids

8.1 Lines, Angles, Triangle Theorems, Congruence/Similarity & Circle Tangent Properties 8.2 Perimeter and Area of Quadrilaterals, Polygons, Circles & Shaded Region Problems 8.3 Surface Area and Volume of Cubes, Cuboids, Cylinders, Cones, Spheres & Melting-Recasting Solids

9 Chapter 9: Statistics, Probability & Data Interpretation

9.1 Mean, Median, Mode, Range, Mean Deviation & Standard Deviation 9.2 Permutations, Combinations, Classical Probability, Independent Events & Odds 9.3 Tabular Data Interpretation, Bar Charts, Grouped Graphs & Percentage Calculation Shortcuts 9.4 Pie Charts (Angle vs Percentage), Line Trend Graphs & Quantitative Data Sufficiency

10 Chapter 10: Multi-Source & Graphical Analysis

10.1 Multi-Source Analysis, Set Data & Arrangement 10.2 Scatter Plots, Histograms & Distribution Curves

11 Chapter 11: Deductive Logic, Statements & Binary Puzzles

11.1 Syllogisms, Sets & Possibility Conclusions 11.2 Critical Reasoning: Implicit Assumptions, Strong vs Weak Arguments & Course of Action 11.3 Binary Logic: Truth-Tellers, Liars, Alternators & Matrix Logic Deductions

12 Chapter 12: Relational, Directional, Clock & Calendar Reasoning

12.1 Direct Family Relations, Coded Blood Relations & Family Tree Tree-Mapping Methods 12.2 Cardinal & Ordinal Directions, Multi-Step Turn Paths, Pythagorean Distance & Shadow Timing 12.3 Clock Hands Angular Speed, Angle Between Hands at Given Time, Coincidence & Faulty Clocks 12.4 Odd Days Concept, Reference Date Calculations, Leap Year Rules & Repeating Calendar Years

13 Chapter 13: English Reading Comprehension

13.1 English Comprehension: Main Idea, Support & Inference 13.2 English Comprehension: Application, Structure & Style

14 Chapter 14: Mental Reasoning: Analogies & Series

14.1 Semantic, Letter & Number Analogies 14.2 Number Series: Differences, Powers & Missing Terms 14.3 Interleaved, Recursive & Wrong-Term Series

15 Chapter 15: Mental Reasoning: Coding & Ranking

15.1 Letter Shifts, Reversal & Numerical Codes 15.2 Message Intersections & Conditional Coding Tables 15.3 Ranking, People Between & Position Interchanges

16 Chapter 16: Mental Reasoning: Seating Arrangements

16.1 Linear Seating & Parallel Rows 16.2 Circular Seating, Facing & Rotational Symmetry

8.3 Surface Area and Volume of Cubes, Cuboids, Cylinders, Cones, Spheres & Melting-Recasting Solids

Key Takeaways Explain This Topic AI

Prism metrics: For a cuboid ( l × b × h l \times b \times h l × b × h ), Volume = l b h \text{Volume} = lbh Volume = l bh , Total Surface Area = 2 ( l b + b h + h l ) \text{Total Surface Area} = 2(lb+bh+hl) Total Surface Area = 2 ( l b + bh + h l ) , Lateral Surface Area = 2 h ( l + b ) \text{Lateral Surface Area} = 2h(l+b) Lateral Surface Area = 2 h ( l + b ) , and the space diagonal (longest rod) is l 2 + b 2 + h 2 \sqrt{l^2+b^2+h^2} l 2 + b 2 + h 2 ​ ; for a cube of edge a a a , V = a 3 V = a^3 V = a 3 , TSA = 6 a 2 \text{TSA} = 6a^2 TSA = 6 a 2 , and diagonal = a 3 \text{diagonal} = a\sqrt{3} diagonal = a 3 ​ .

Circular solids: A cylinder has V = π r 2 h V = \pi r^2 h V = π r 2 h , CSA = 2 π r h \text{CSA} = 2\pi rh CSA = 2 π r h , and TSA = 2 π r ( r + h ) \text{TSA} = 2\pi r(r+h) TSA = 2 π r ( r + h ) ; hollow cylindrical pipes have material volume π ( R 2 − r 2 ) h \pi(R^2 - r^2)h π ( R 2 − r 2 ) h and total surface area 2 π ( R + r ) ( h + R − r ) 2\pi(R+r)(h + R - r) 2 π ( R + r ) ( h + R − r ) .

Cones and frustums: A cone of slant height l = r 2 + h 2 l = \sqrt{r^2+h^2} l = r 2 + h 2 ​ has V = 1 3 π r 2 h V = \frac{1}{3}\pi r^2 h V = 3 1 ​ π r 2 h , CSA = π r l \text{CSA} = \pi rl CSA = π r l , and TSA = π r ( l + r ) \text{TSA} = \pi r(l+r) TSA = π r ( l + r ) ; a frustum of height h h h and radii R , r R, r R , r has V = 1 3 π h ( R 2 + r 2 + R r ) V = \frac{1}{3}\pi h(R^2 + r^2 + Rr) V = 3 1 ​ πh ( R 2 + r 2 + R r ) and CSA = π ( R + r ) l \text{CSA} = \pi(R+r)l CSA = π ( R + r ) l .

Spheres and hemispheres: A sphere has Volume = 4 3 π r 3 \text{Volume} = \frac{4}{3}\pi r^3 Volume = 3 4 ​ π r 3 and Surface Area = 4 π r 2 \text{Surface Area} = 4\pi r^2 Surface Area = 4 π r 2 ; a hemisphere has Volume = 2 3 π r 3 \text{Volume} = \frac{2}{3}\pi r^3 Volume = 3 2 ​ π r 3 , CSA = 2 π r 2 \text{CSA} = 2\pi r^2 CSA = 2 π r 2 , and TSA = 3 π r 2 \text{TSA} = 3\pi r^2 TSA = 3 π r 2 .

Recasting conserves volume in these exercises because material and density stay the same and there is no wastage. Recasting one sphere into N N N identical smaller spheres makes their combined surface area N 1 / 3 N^{1/3} N 1/3 times the original.

Last updated: October 2026

  • Cuboids and Cubes
  • 1. Cuboid (Rectangular Parallelepiped)

Defined by length l l l , breadth b b b , and height h h h :

Volume: V = l × b × h V = l \times b \times h V = l × b × h .

Total Surface Area (TSA): Sum of all six rectangular faces: TSA = 2 ( l b + b h + h l ) \text{TSA} = 2(lb + bh + hl) TSA = 2 ( l b + bh + h l )

Lateral Surface Area (LSA) / Area of 4 Walls: LSA = 2 h ( l + b ) = Perimeter of Base × Height \text{LSA} = 2h(l + b) = \text{Perimeter of Base} \times \text{Height} LSA = 2 h ( l + b ) = Perimeter of Base × Height

Space Diagonal ( d d d ): The length of the longest straight rod or rail that can fit inside the cuboid: d = l 2 + b 2 + h 2 d = \sqrt{l^2 + b^2 + h^2} d = l 2 + b 2 + h 2 ​ +─────────────────────────────────────────────────────────────+

  • | CUBOID SPACE METRICS |
  • +─────────────────────────────────────────────────────────────+
  • | Dimensions: Length = l, Breadth = b, Height = h |
  • | |
  • | Space Diagonal: d = √(l² + b² + h²) |
  • | (Longest pole/rod that can fit inside the container) |
  • | |
  • | Important Algebraic Expansion Identity: |
  • | (l + b + h)² = (l² + b² + h²) + 2(lb + bh + hl) |
  • | (Sum of Dimensions)² = (Diagonal)² + (Total Surface Area) |
  • | TSA = (l + b + h)² - d² |
  • +─────────────────────────────────────────────────────────────+
  • 2. Cube (Side / Edge a a a )

When all dimensions are equal ( l = b = h = a l = b = h = a l = b = h = a ):

Volume: V = a 3 V = a^3 V = a 3 .

Total Surface Area (TSA): TSA = 6 a 2 \text{TSA} = 6a^2 TSA = 6 a 2 .

Lateral Surface Area (LSA): LSA = 4 a 2 \text{LSA} = 4a^2 LSA = 4 a 2 .

Space Diagonal: d = a 3 d = a\sqrt{3} d = a 3 ​ .

Face Diagonal: d face = a 2 d_{\text{face}} = a\sqrt{2} d face ​ = a 2 ​ .

  • Right Circular Cylinders & Hollow Pipes
  • 1. Solid Cylinder (Radius r r r , Height h h h )

Volume: V = π r 2 h = Base Area × Height V = \pi r^2 h = \text{Base Area} \times \text{Height} V = π r 2 h = Base Area × Height .

Curved Surface Area (CSA): Area of unrolled rectangular jacket: CSA = 2 π r h \text{CSA} = 2\pi r h CSA = 2 π r h

Total Surface Area (TSA): CSA plus top and bottom circular bases: TSA = 2 π r h + 2 π r 2 = 2 π r ( r + h ) \text{TSA} = 2\pi rh + 2\pi r^2 = 2\pi r(r + h) TSA = 2 π r h + 2 π r 2 = 2 π r ( r + h )

2. Hollow Cylinder (Pipes, Track Drainage Culverts & Tank Shells)

With outer radius R R R , inner radius r r r , height/length h h h , and thickness t = R − r t = R - r t = R − r :

Volume of Metal / Material: V = π ( R 2 − r 2 ) h = π ( R + r ) ( R − r ) h V = \pi(R^2 - r^2)h = \pi(R + r)(R - r)h V = π ( R 2 − r 2 ) h = π ( R + r ) ( R − r ) h

External Curved Surface Area: CSA ext = 2 π R h \text{CSA}_{\text{ext}} = 2\pi Rh CSA ext ​ = 2 π R h .

Internal Curved Surface Area: CSA int = 2 π r h \text{CSA}_{\text{int}} = 2\pi rh CSA int ​ = 2 π r h .

Total Surface Area (TSA): TSA = Ext CSA + Int CSA + 2 ( Annular End Area ) \text{TSA} = \text{Ext CSA} + \text{Int CSA} + 2(\text{Annular End Area}) TSA = Ext CSA + Int CSA + 2 ( Annular End Area ) TSA = 2 π R h + 2 π r h + 2 π ( R 2 − r 2 ) = 2 π ( R + r ) ( h + R − r ) \text{TSA} = 2\pi Rh + 2\pi rh + 2\pi(R^2 - r^2) = 2\pi(R + r)(h + R - r) TSA = 2 π R h + 2 π r h + 2 π ( R 2 − r 2 ) = 2 π ( R + r ) ( h + R − r )

  • Right Circular Cones & Frustums +─────────────────────────────────────────────────────────────+
  • | CONE & FRUSTUM GEOMETRY |
  • +─────────────────────────────────────────────────────────────+
  • | RIGHT CIRCULAR CONE: FRUSTUM OF A CONE: |
  • | ▲ Vertex Top Radius = r |
  • | / \ ┌─────────────┐ |
  • | Slant / \ / \ |
  • | Height / h \ / h \ |
  • | (l) / \ / \|
  • | / r \ └─────────────────────┘
  • | └───────────┘ Bottom Radius = R
  • | l = √(r² + h²) l = √[h² + (R - r)²] |
  • | V = (1/3)πr²h V = (1/3)πh(R² + r² + Rr)|
  • | CSA = πrl CSA = π(R + r)l |
  • +─────────────────────────────────────────────────────────────+
  • 1. Solid Cone (Base Radius r r r , Vertical Height h h h )
  • Slant Height ( l l l ): l = r 2 + h 2 l = \sqrt{r^2 + h^2} l = r 2 + h 2 ​

Volume: Exactly one-third of the circumscribing cylinder: V = 1 3 π r 2 h V = \frac{1}{3}\pi r^2 h V = 3 1 ​ π r 2 h

Curved Surface Area (CSA): CSA = π r l \text{CSA} = \pi r l CSA = π r l .

Total Surface Area (TSA): TSA = π r l + π r 2 = π r ( l + r ) \text{TSA} = \pi rl + \pi r^2 = \pi r(l + r) TSA = π r l + π r 2 = π r ( l + r ) .

2. Frustum of a Cone (Hopper Chutes, Water Buckets)

When a cone is sliced by a plane parallel to its base, leaving top radius r r r , bottom radius R R R , and vertical height h h h :

  • Slant Height ( l l l ): l = h 2 + ( R − r ) 2 l = \sqrt{h^2 + (R - r)^2} l = h 2 + ( R − r ) 2 ​
  • Volume: V = 1 3 π h ( R 2 + r 2 + R r ) V = \frac{1}{3}\pi h (R^2 + r^2 + Rr) V = 3 1 ​ πh ( R 2 + r 2 + R r )
  • Curved Surface Area (CSA): CSA = π ( R + r ) l \text{CSA} = \pi (R + r) l CSA = π ( R + r ) l

Total Surface Area (TSA): TSA = π ( R + r ) l + π R 2 + π r 2 \text{TSA} = \pi (R + r) l + \pi R^2 + \pi r^2 TSA = π ( R + r ) l + π R 2 + π r 2

  • Spheres, Hemispheres & Spherical Shells
  • 1. Solid Sphere (Radius r r r )

Volume: V = 4 3 π r 3 V = \frac{4}{3}\pi r^3 V = 3 4 ​ π r 3 .

Surface Area ( S S S ): S = 4 π r 2 S = 4\pi r^2 S = 4 π r 2 . (Note: A sphere has only one surface area; CSA and TSA are identical).

  • 2. Hemisphere (Radius r r r )
  • Volume: Half of the full sphere: V = 2 3 π r 3 V = \frac{2}{3}\pi r^3 V = 3 2 ​ π r 3

Curved Surface Area (CSA): 2 π r 2 2\pi r^2 2 π r 2 .

Total Surface Area (TSA): CSA plus flat circular base: TSA = 2 π r 2 + π r 2 = 3 π r 2 \text{TSA} = 2\pi r^2 + \pi r^2 = 3\pi r^2 TSA = 2 π r 2 + π r 2 = 3 π r 2

3. Spherical Shell (Hollow Sphere)

With outer radius R R R and inner radius r r r :

Volume of Metal: V = 4 3 π ( R 3 − r 3 ) V = \frac{4}{3}\pi(R^3 - r^3) V = 3 4 ​ π ( R 3 − r 3 ) .

Outer Surface Area: 4 π R 2 4\pi R^2 4 π R 2 ; Inner Surface Area: 4 π r 2 4\pi r^2 4 π r 2 .

  • Melting, Recasting & Volume Conservation Dynamics
  • 1. The Fundamental Law of Volume Conservation

When one or more solid bodies are melted, crushed, or recast into different solid shapes without loss of material, the total volume remains strictly constant : Initial Volume ( V initial ) = Total Final Volume ( ∑ V final ) \text{Initial Volume } (V_{\text{initial}}) = \text{Total Final Volume } (\sum V_{\text{final}}) Initial Volume ( V initial ​ ) = Total Final Volume ( ∑ V final ​ )

If a single solid of volume V large V_{\text{large}} V large ​ is melted and recast into N N N identical smaller solids each of volume V small V_{\text{small}} V small ​ : N = V large V small N = \frac{V_{\text{large}}}{V_{\text{small}}} N = V small ​ V large ​ ​

2. Recasting a Sphere into Smaller Spheres

If a solid sphere of radius R R R is melted into N N N small spheres of radius r r r : 4 3 π R 3 = N × ( 4 3 π r 3 ) ⟹ R 3 = N ⋅ r 3 ⟹ N = ( R r ) 3 \frac{4}{3}\pi R^3 = N \times \left(\frac{4}{3}\pi r^3\right) \implies R^3 = N \cdot r^3 \implies N = \left(\frac{R}{r}\right)^3 3 4 ​ π R 3 = N × ( 3 4 ​ π r 3 ) ⟹ R 3 = N ⋅ r 3 ⟹ N = ( r R ​ ) 3

Important

Surface Area Escalation upon Subdivision: Although volume is conserved during recasting, surface area is NOT conserved —it increases substantially! The ratio of total new surface area to original surface area is: New TSA Original TSA = N × 4 π r 2 4 π R 2 = N ( r R ) 2 = N ( 1 N 1 / 3 ) 2 = N 1 / 3 = R r \frac{\text{New TSA}}{\text{Original TSA}} = \frac{N \times 4\pi r^2}{4\pi R^2} = N \left(\frac{r}{R}\right)^2 = N \left(\frac{1}{N^{1/3}}\right)^2 = N^{1/3} = \frac{R}{r} Original TSA New TSA ​ = 4 π R 2 N × 4 π r 2 ​ = N ( R r ​ ) 2 = N ( N 1/3 1 ​ ) 2 = N 1/3 = r R ​

Melting a large sphere into 64 small spheres ( N = 64 N = 64 N = 64 ) increases the total surface area by 64 1 / 3 = 4 64^{1/3} = 4 6 4 1/3 = 4 times!

3. Liquid Flow Rate Through Pipes into Cisterns

When water flows through a cylindrical pipe of cross-sectional radius r pipe r_{\text{pipe}} r pipe ​ at uniform velocity v v v for time t t t , the total volume of fluid delivered is: Discharge Volume ( V ) = Cross-Sectional Area × Velocity × Time = ( π r pipe 2 ) ⋅ v ⋅ t \text{Discharge Volume } (V) = \text{Cross-Sectional Area} \times \text{Velocity} \times \text{Time} = (\pi r_{\text{pipe}}^2) \cdot v \cdot t Discharge Volume ( V ) = Cross-Sectional Area × Velocity × Time = ( π r pipe 2 ​ ) ⋅ v ⋅ t

Equating this to the receiving rectangular reservoir ( l × b × H l \times b \times H l × b × H ) gives the time or height reached: ( π r pipe 2 ) ⋅ v ⋅ t = l × b × H (\pi r_{\text{pipe}}^2) \cdot v \cdot t = l \times b \times H ( π r pipe 2 ​ ) ⋅ v ⋅ t = l × b × H

  • Dimensional Percentage Variations & Scaling Laws
  • Scaling Factor ( k k k )

When all linear dimensions of a solid are scaled by factor k k k :

Any Linear Dimension (radius, height, diagonal) changes by k k k .

Any Surface Area (CSA, TSA, Base Area) changes by k 2 k^2 k 2 .

Any Volume changes by k 3 k^3 k 3 .

Percentage Changes in Cylinders and Cones

Because Volume V ∝ r 2 h V \propto r^2 h V ∝ r 2 h :

If radius increases by x % x\% x % and height changes by y % y\% y % : V new = V old × ( 1 + x 100 ) 2 ( 1 + y 100 ) V_{\text{new}} = V_{\text{old}} \times \left(1 + \frac{x}{100}\right)^2 \left(1 + \frac{y}{100}\right) V new ​ = V old ​ × ( 1 + 100 x ​ ) 2 ( 1 + 100 y ​ )

If radius increases by + 20 % +20\% + 20% and height decreases by − 25 % -25\% − 25% : V new = V old × ( 1.20 ) 2 × ( 0.75 ) = V old × 1.44 × 0.75 = 1.08 V old V_{\text{new}} = V_{\text{old}} \times (1.20)^2 \times (0.75) = V_{\text{old}} \times 1.44 \times 0.75 = 1.08 V_{\text{old}} V new ​ = V old ​ × ( 1.20 ) 2 × ( 0.75 ) = V old ​ × 1.44 × 0.75 = 1.08 V old ​

Net volume increases by + 8 % +8\% + 8% .

  • Worked Examples
  • Worked Example 1: Parcel Van Space Diagonal & Internal Surface Painting

Problem: A railway divisional parcel brake-van compartment has length 12 m 12\text{ m} 12 m , breadth 9 m 9\text{ m} 9 m , and height 8 m 8\text{ m} 8 m . (a) Calculate the length of the longest rigid steel measuring rail that can be stowed completely inside the compartment. (b) Calculate the total cost of painting the four internal walls and the ceiling (5 surfaces, excluding the floor) at ₹25 per m 2 \text{m}^2 m 2 .

Step 1: Compute Space Diagonal (Longest Rod): d = l 2 + b 2 + h 2 = 12 2 + 9 2 + 8 2 = 144 + 81 + 64 = 289 = 17 m d = \sqrt{l^2 + b^2 + h^2} = \sqrt{12^2 + 9^2 + 8^2} = \sqrt{144 + 81 + 64} = \sqrt{289} = 17\text{ m} d = l 2 + b 2 + h 2 ​ = 1 2 2 + 9 2 + 8 2 ​ = 144 + 81 + 64 ​ = 289 ​ = 17 m

Step 2: Compute Surface Area to Paint (4 Walls + Ceiling): Area of 4 Walls = 2 h ( l + b ) = 2 ( 8 ) ( 12 + 9 ) = 16 × 21 = 336 m 2 \text{Area of 4 Walls} = 2h(l + b) = 2(8)(12 + 9) = 16 \times 21 = 336\text{ m}^2 Area of 4 Walls = 2 h ( l + b ) = 2 ( 8 ) ( 12 + 9 ) = 16 × 21 = 336 m 2 Area of Ceiling = l × b = 12 × 9 = 108 m 2 \text{Area of Ceiling} = l \times b = 12 \times 9 = 108\text{ m}^2 Area of Ceiling = l × b = 12 × 9 = 108 m 2 Total Surface Area to Paint = 336 + 108 = 444 m 2 \text{Total Surface Area to Paint} = 336 + 108 = 444\text{ m}^2 Total Surface Area to Paint = 336 + 108 = 444 m 2

Step 3: Compute Painting Expenditure: Cost = 444 m 2 × INR 25 / m 2 = INR 11 , 100 \text{Cost} = 444\text{ m}^2 \times \text{INR } 25/\text{m}^2 = \text{INR } 11,100 Cost = 444 m 2 × INR 25/ m 2 = INR 11 , 100

Worked Example 2: Recasting a Solid Metal Cylinder into Cones

Problem: A solid cylindrical bronze axle rod of base radius 6 cm 6\text{ cm} 6 cm and height 14 cm 14\text{ cm} 14 cm is melted down and completely recast into small solid decorative cones, each having base radius 3 cm 3\text{ cm} 3 cm and vertical height 7 cm 7\text{ cm} 7 cm . Assuming no wastage of metal during foundry casting, determine how many such cones are formed.

Step 1: Compute Volume of the Bronze Cylinder: V cyl = π r 1 2 h 1 = π × ( 6 ) 2 × 14 = 36 × 14 × π = 504 π cm 3 V_{\text{cyl}} = \pi r_1^2 h_1 = \pi \times (6)^2 \times 14 = 36 \times 14 \times \pi = 504\pi\text{ cm}^3 V cyl ​ = π r 1 2 ​ h 1 ​ = π × ( 6 ) 2 × 14 = 36 × 14 × π = 504 π cm 3

Step 2: Compute Volume of a Single Recast Cone: V cone = 1 3 π r 2 2 h 2 = 1 3 π × ( 3 ) 2 × 7 = 1 3 × 9 × 7 × π = 21 π cm 3 V_{\text{cone}} = \frac{1}{3}\pi r_2^2 h_2 = \frac{1}{3}\pi \times (3)^2 \times 7 = \frac{1}{3} \times 9 \times 7 \times \pi = 21\pi\text{ cm}^3 V cone ​ = 3 1 ​ π r 2 2 ​ h 2 ​ = 3 1 ​ π × ( 3 ) 2 × 7 = 3 1 ​ × 9 × 7 × π = 21 π cm 3

Step 3: Calculate Number of Cones ( N N N ): N = V cyl V cone = 504 π 21 π = 504 21 = 24 cones N = \frac{V_{\text{cyl}}}{V_{\text{cone}}} = \frac{504\pi}{21\pi} = \frac{504}{21} = 24\text{ cones} N = V cone ​ V cyl ​ ​ = 21 π 504 π ​ = 21 504 ​ = 24 cones

Worked Example 3: Cylindrical Pipe Discharge into a Locomotive Reservoir

Problem: Water flows through a cylindrical railway water pipe of internal diameter 14 cm 14\text{ cm} 14 cm at a velocity of 5 m/s 5\text{ m/s} 5 m/s into a large rectangular locomotive reservoir measuring 22 m 22\text{ m} 22 m long and 14 m 14\text{ m} 14 m wide. Using π = 22 / 7 \pi = 22/7 π = 22/7 , determine how many hours it will take for the water level in the reservoir to rise by 3 m 3\text{ m} 3 m .

Step 1: Standardize Units to Meters and Seconds:

Pipe radius r = 14 cm / 2 = 7 cm = 0.07 m = 7 100 m r = 14\text{ cm} / 2 = 7\text{ cm} = 0.07\text{ m} = \frac{7}{100}\text{ m} r = 14 cm /2 = 7 cm = 0.07 m = 100 7 ​ m .

Flow velocity v = 5 m/s v = 5\text{ m/s} v = 5 m/s .

Step 2: Compute Rate of Water Discharge per Second: Discharge Rate = π r 2 × v = 22 7 × ( 7 100 ) 2 × 5 = 22 7 × 49 10000 × 5 = 154 × 5 10000 = 770 10000 = 0.077 m 3 / s \text{Discharge Rate} = \pi r^2 \times v = \frac{22}{7} \times \left(\frac{7}{100}\right)^2 \times 5 = \frac{22}{7} \times \frac{49}{10000} \times 5 = \frac{154 \times 5}{10000} = \frac{770}{10000} = 0.077\text{ m}^3/\text{s} Discharge Rate = π r 2 × v = 7 22 ​ × ( 100 7 ​ ) 2 × 5 = 7 22 ​ × 10000 49 ​ × 5 = 10000 154 × 5 ​ = 10000 770 ​ = 0.077 m 3 / s

Step 3: Compute Volume of Water Delivered per Hour ( 3600 s 3600\text{ s} 3600 s ): Discharge per Hour = 0.077 × 3600 = 277.2 m 3 / hour \text{Discharge per Hour} = 0.077 \times 3600 = 277.2\text{ m}^3/\text{hour} Discharge per Hour = 0.077 × 3600 = 277.2 m 3 / hour

Step 4: Compute Required Reservoir Volume: V reservoir = l × b × H = 22 × 14 × 3 = 924 m 3 V_{\text{reservoir}} = l \times b \times H = 22 \times 14 \times 3 = 924\text{ m}^3 V reservoir ​ = l × b × H = 22 × 14 × 3 = 924 m 3

Step 5: Compute Filling Duration in Hours: Time = 924 m 3 277.2 m 3 / hour = 9240 2772 = 10 3 hours = 3 1 3 hours = 3 hours 20 minutes \text{Time} = \frac{924\text{ m}^3}{277.2\text{ m}^3/\text{hour}} = \frac{9240}{2772} = \frac{10}{3} \text{ hours} = 3\frac{1}{3}\text{ hours} = 3\text{ hours } 20\text{ minutes} Time = 277.2 m 3 / hour 924 m 3 ​ = 2772 9240 ​ = 3 10 ​ hours = 3 3 1 ​ hours = 3 hours 20 minutes

Calculation Traps & Speed Heuristics

The Hemisphere Surface Area Trap (CSA vs. TSA): The curved surface area of a hemisphere is 2 π r 2 2\pi r^2 2 π r 2 . However, if a problem asks for the total surface area of a solid hemisphere, you must include the flat circular top: TSA = 3 π r 2 \text{TSA} = 3\pi r^2 TSA = 3 π r 2 . Candidates who blindly use 2 π r 2 2\pi r^2 2 π r 2 lose marks instantly.

The Cone Slant Height vs. Vertical Height Trap: The volume of a cone uses vertical height h h h ( V = 1 3 π r 2 h V = \frac{1}{3}\pi r^2 h V = 3 1 ​ π r 2 h ), but the curved surface area uses slant height l l l ( CSA = π r l \text{CSA} = \pi r l CSA = π r l ). Never plug vertical height into the CSA formula without first computing l = r 2 + h 2 l = \sqrt{r^2 + h^2} l = r 2 + h 2 ​ .

Dimensional Scaling Speed Shortcut: If the edge of a cube or radius of a sphere is doubled ( k = 2 k = 2 k = 2 ):

Surface area becomes 2 2 = 4 2^2 = 4 2 2 = 4 times (increases by 300 % 300\% 300% ).

Volume becomes 2 3 = 8 2^3 = 8 2 3 = 8 times (increases by 700 % 700\% 700% ).

Volume conservation in these recasting exercises assumes the same material and density before and after recasting, with no wastage. In physical processing generally, mass conservation alone does not guarantee equal volume if density changes.