Study guide

8.2 Perimeter and Area of Quadrilaterals, Polygons, Circles & Shaded Region Problems

RRB Section Controller 2026: Free Written CBT Study Guide Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Exam Overview & Operational Profile

1.1 Written CBT Pattern, Scoring & Selection 1.2 Eligibility, Documents & A-2 Medical Requirements

2 Chapter 2: Number Systems & Arithmetic Foundations

2.1 Number Systems, Divisibility Rules, Prime Factorization & Remainder Theorem 2.2 Unit Digits, Cyclicity Rules & Power Modulo Calculations 2.3 HCF and LCM Properties, Prime Factorization & Practical Word Problems 2.4 Fractions, Decimals, Surds, Indices & BODMAS Simplification

3 Chapter 3: Commercial Arithmetic: Percentages, Profit & Rates

3.1 Percentages, Fractional Equivalents, Successive Variations & Population Formulas 3.2 Cost Price, Selling Price, Profit/Loss Percentage, Dishonest Dealer & Discount Schemes 3.3 Simple Interest, Compound Interest Formulas, Annual/Semi-Annual Compounding & Difference Traps

4 Chapter 4: Ratios, Proportions, Mixtures & Partnerships

4.1 Ratios, Duplicate/Sub-Duplicate Ratios, Direct and Inverse Variations & Proportional Sharing 4.2 Averages, Change in Average, Batsman/Bowling Averages & Replacement Problems 4.3 Rule of Alligation, Removal-Replacement Mixtures & Partnership Capital-Time Sharing

5 Chapter 5: Motion Dynamics, Time, Distance & Train Logistics

5.1 Time, Speed, Distance Relations, Average Speed & Unit Conversions 5.2 Train Problems: Passing Poles, Platforms, Moving Objects & Relative Speed in Opposite/Same Directions 5.3 Upstream, Downstream Boat Velocity, Still Water Speed & Circular Track Races

6 Chapter 6: Work Efficiency, Pipes & Operational Scheduling

6.1 Individual and Group Work, Efficiency Ratios, Work Equivalences & Mandays Formula 6.2 Alternate Day Working, Negative Work & Wage Distribution Based on Work Done 6.3 Inlet and Outlet Pipes, Net Filling Rate, Alternating Flow & Tank Leakage Problems

7 Chapter 7: Algebra, Linear Equations & Progressions

7.1 Algebraic Identities, Polynomial Factorization & Systems of Linear Equations in Two Variables 7.2 Quadratic Equations, Nature of Roots, Discriminant Analysis & Maximum/Minimum Values 7.3 Arithmetic Progressions (AP), General Term, Sum of n Terms & Sequence Modeling

8 Chapter 8: Mensuration: 2D Areas & 3D Solids

8.1 Lines, Angles, Triangle Theorems, Congruence/Similarity & Circle Tangent Properties 8.2 Perimeter and Area of Quadrilaterals, Polygons, Circles & Shaded Region Problems 8.3 Surface Area and Volume of Cubes, Cuboids, Cylinders, Cones, Spheres & Melting-Recasting Solids

9 Chapter 9: Statistics, Probability & Data Interpretation

9.1 Mean, Median, Mode, Range, Mean Deviation & Standard Deviation 9.2 Permutations, Combinations, Classical Probability, Independent Events & Odds 9.3 Tabular Data Interpretation, Bar Charts, Grouped Graphs & Percentage Calculation Shortcuts 9.4 Pie Charts (Angle vs Percentage), Line Trend Graphs & Quantitative Data Sufficiency

10 Chapter 10: Multi-Source & Graphical Analysis

10.1 Multi-Source Analysis, Set Data & Arrangement 10.2 Scatter Plots, Histograms & Distribution Curves

11 Chapter 11: Deductive Logic, Statements & Binary Puzzles

11.1 Syllogisms, Sets & Possibility Conclusions 11.2 Critical Reasoning: Implicit Assumptions, Strong vs Weak Arguments & Course of Action 11.3 Binary Logic: Truth-Tellers, Liars, Alternators & Matrix Logic Deductions

12 Chapter 12: Relational, Directional, Clock & Calendar Reasoning

12.1 Direct Family Relations, Coded Blood Relations & Family Tree Tree-Mapping Methods 12.2 Cardinal & Ordinal Directions, Multi-Step Turn Paths, Pythagorean Distance & Shadow Timing 12.3 Clock Hands Angular Speed, Angle Between Hands at Given Time, Coincidence & Faulty Clocks 12.4 Odd Days Concept, Reference Date Calculations, Leap Year Rules & Repeating Calendar Years

13 Chapter 13: English Reading Comprehension

13.1 English Comprehension: Main Idea, Support & Inference 13.2 English Comprehension: Application, Structure & Style

14 Chapter 14: Mental Reasoning: Analogies & Series

14.1 Semantic, Letter & Number Analogies 14.2 Number Series: Differences, Powers & Missing Terms 14.3 Interleaved, Recursive & Wrong-Term Series

15 Chapter 15: Mental Reasoning: Coding & Ranking

15.1 Letter Shifts, Reversal & Numerical Codes 15.2 Message Intersections & Conditional Coding Tables 15.3 Ranking, People Between & Position Interchanges

16 Chapter 16: Mental Reasoning: Seating Arrangements

16.1 Linear Seating & Parallel Rows 16.2 Circular Seating, Facing & Rotational Symmetry

8.2 Perimeter and Area of Quadrilaterals, Polygons, Circles & Shaded Region Problems

Key Takeaways Explain This Topic AI

Triangle area mechanics: Heron's formula Δ = s ( s − a ) ( s − b ) ( s − c ) \Delta = \sqrt{s(s-a)(s-b)(s-c)} Δ = s ( s − a ) ( s − b ) ( s − c ) ​ solves scalene areas; an equilateral triangle of side a a a has Area = 3 4 a 2 \text{Area} = \frac{\sqrt{3}}{4}a^2 Area = 4 3 ​ ​ a 2 , height = 3 2 a \text{height} = \frac{\sqrt{3}}{2}a height = 2 3 ​ ​ a , inradius r = a 2 3 r = \frac{a}{2\sqrt{3}} r = 2 3 ​ a ​ , and circumradius R = a 3 R = \frac{a}{\sqrt{3}} R = 3 ​ a ​ .

Quadrilaterals: Rhombus area is 1 2 d 1 d 2 \frac{1}{2}d_1 d_2 2 1 ​ d 1 ​ d 2 ​ with side a = 1 2 d 1 2 + d 2 2 a = \frac{1}{2}\sqrt{d_1^2 + d_2^2} a = 2 1 ​ d 1 2 ​ + d 2 2 ​ ​ and 4 a 2 = d 1 2 + d 2 2 4a^2 = d_1^2 + d_2^2 4 a 2 = d 1 2 ​ + d 2 2 ​ ; trapezium area is 1 2 ( a + b ) h = Median × h \frac{1}{2}(a+b)h = \text{Median} \times h 2 1 ​ ( a + b ) h = Median × h ; parallelogram area is b × h = a b sin ⁡ θ b \times h = ab \sin \theta b × h = ab sin θ .

Pathway mechanics around a rectangular plot ( l × b l \times b l × b ): an outer pathway of width w w w has area 2 w ( l + b + 2 w ) 2w(l+b+2w) 2 w ( l + b + 2 w ) , an inner pathway has area 2 w ( l + b − 2 w ) 2w(l+b-2w) 2 w ( l + b − 2 w ) , and central perpendicular cross-paths have area w ( l + b − w ) w(l+b-w) w ( l + b − w ) .

Circles and sectors: Semicircle perimeter strictly includes the boundary diameter: P = π r + 2 r = r ( π + 2 ) ≈ 36 7 r P = \pi r + 2r = r(\pi + 2) \approx \frac{36}{7}r P = π r + 2 r = r ( π + 2 ) ≈ 7 36 ​ r ; sector area is θ 360 ∘ π r 2 = 1 2 l r \frac{\theta}{360^\circ}\pi r^2 = \frac{1}{2}lr 36 0 ∘ θ ​ π r 2 = 2 1 ​ l r ; circular annulus area is π ( R 2 − r 2 ) = π ( R + r ) ( R − r ) \pi(R^2 - r^2) = \pi(R+r)(R-r) π ( R 2 − r 2 ) = π ( R + r ) ( R − r ) .

Regular polygons: An n n n -gon has interior angle sum ( n − 2 ) × 180 ∘ (n-2) \times 180^\circ ( n − 2 ) × 18 0 ∘ , each interior angle ( n − 2 ) × 180 ∘ n \frac{(n-2) \times 180^\circ}{n} n ( n − 2 ) × 18 0 ∘ ​ , number of diagonals n ( n − 3 ) 2 \frac{n(n-3)}{2} 2 n ( n − 3 ) ​ , and a regular hexagon of side a a a has area 3 3 2 a 2 \frac{3\sqrt{3}}{2}a^2 2 3 3 ​ ​ a 2 .

Last updated: October 2026

Triangles: Area and Dimension Formulations +-----------------------------------------------------------------------------+

  • | TRIANGLE AREA FORMULATION MATRIX |
  • +-----------------------------------------------------------------------------+
  • | Triangle Type | Area Formula | Key Geometric Radii |
  • +--------------------+--------------------------------+-----------------------+
  • | General Scalene | Heron's: √[s(s-a)(s-b)(s-c)] | r = Δ/s, R = abc/(4Δ) |
  • | Right-Angled | (1/2) * base * height | r = (a+b-c)/2, R = c/2|
  • | Equilateral | (√3 / 4) * a² | r = a/(2√3), R = a/√3 |
  • | Isosceles | (b / 4) * √(4a² - b²) | h = (1/2) * √(4a² - b²)|
  • +-----------------------------------------------------------------------------+
  • 1. General Scalene Triangle

Base & Height: Area = 1 2 × base × height = 1 2 a b sin ⁡ C \text{Area} = \frac{1}{2} \times \text{base} \times \text{height} = \frac{1}{2} ab \sin C Area = 2 1 ​ × base × height = 2 1 ​ ab sin C .

Heron's Formula: When all three sides a , b , c a, b, c a , b , c are known: s = a + b + c 2 ( semi-perimeter ) s = \frac{a+b+c}{2} \quad (\text{semi-perimeter}) s = 2 a + b + c ​ ( semi-perimeter ) Area ( Δ ) = s ( s − a ) ( s − b ) ( s − c ) \text{Area} (\Delta) = \sqrt{s(s-a)(s-b)(s-c)} Area ( Δ ) = s ( s − a ) ( s − b ) ( s − c ) ​

2. Equilateral Triangle (Side a a a )

Height (Altitude): h = 3 2 a h = \frac{\sqrt{3}}{2}a h = 2 3 ​ ​ a .

Area: Area = 3 4 a 2 = h 2 3 \text{Area} = \frac{\sqrt{3}}{4}a^2 = \frac{h^2}{\sqrt{3}} Area = 4 3 ​ ​ a 2 = 3 ​ h 2 ​ .

Inradius ( r r r ): r = h 3 = a 2 3 r = \frac{h}{3} = \frac{a}{2\sqrt{3}} r = 3 h ​ = 2 3 ​ a ​ .

Circumradius ( R R R ): R = 2 h 3 = a 3 = 2 r R = \frac{2h}{3} = \frac{a}{\sqrt{3}} = 2r R = 3 2 h ​ = 3 ​ a ​ = 2 r .

Area Ratio of Circles: Area of Incircle : Area of Circumcircle = π r 2 : π R 2 = 1 : 4 \text{Area of Incircle} : \text{Area of Circumcircle} = \pi r^2 : \pi R^2 = 1 : 4 Area of Incircle : Area of Circumcircle = π r 2 : π R 2 = 1 : 4 .

3. Right-Angled Triangle

For perpendicular legs a , b a, b a , b and hypotenuse c = a 2 + b 2 c = \sqrt{a^2 + b^2} c = a 2 + b 2 ​ : Area = 1 2 a b \text{Area} = \frac{1}{2}ab Area = 2 1 ​ ab

  • Altitude to Hypotenuse ( p p p ): p = a × b c p = \frac{a \times b}{c} p = c a × b ​
  • Quadrilaterals: Exhaustive Formulas & Pathway Rules
  • 1. Rectangle (Length l l l , Breadth b b b )

Area = l × b \text{Area} = l \times b Area = l × b , Perimeter = 2 ( l + b ) \text{Perimeter} = 2(l + b) Perimeter = 2 ( l + b ) , Diagonal d = l 2 + b 2 \text{Diagonal } d = \sqrt{l^2 + b^2} Diagonal d = l 2 + b 2 ​ .

Pathway Formulas (Width w w w ): All lengths are positive. An inner path needs 2 w ≤ min ⁡ ( l , b ) 2w\le\min(l,b) 2 w ≤ min ( l , b ) ; central cross-paths need w ≤ min ⁡ ( l , b ) w\le\min(l,b) w ≤ min ( l , b ) .

Uniform Outer Path: Runs outside a rectangle l × b l \times b l × b : Area of Outer Path = ( l + 2 w ) ( b + 2 w ) − l b = 2 w ( l + b + 2 w ) \text{Area of Outer Path} = (l + 2w)(b + 2w) - lb = 2w(l + b + 2w) Area of Outer Path = ( l + 2 w ) ( b + 2 w ) − l b = 2 w ( l + b + 2 w )

Uniform Inner Path: Runs inside a rectangle l × b l \times b l × b : Area of Inner Path = l b − ( l − 2 w ) ( b − 2 w ) = 2 w ( l + b − 2 w ) \text{Area of Inner Path} = lb - (l - 2w)(b - 2w) = 2w(l + b - 2w) Area of Inner Path = l b − ( l − 2 w ) ( b − 2 w ) = 2 w ( l + b − 2 w )

Central Cross Paths: Two pathways of width w w w running parallel to sides and intersecting at center: Area of Cross Paths = w ( l + b − w ) \text{Area of Cross Paths} = w(l + b - w) Area of Cross Paths = w ( l + b − w ) +─────────────────────────────────────────────────────────────+

  • | RECTANGULAR PATHWAY PROFILES |
  • +─────────────────────────────────────────────────────────────+
  • | OUTER PATH (Width w): INNER PATH (Width w): |
  • | ┌───────────────────────┐ ┌─────────────────────────┐ |
  • | │ Pathway (w) │ │ Outer Boundary (l x b) │ |
  • | │ ┌───────────────┐ │ │ ┌─────────────────┐ │ |
  • | │ │ Plot (l x b) │ │ │ │ Inner Unpaved │ │ |
  • | │ └───────────────┘ │ │ │ (l-2w) x (b-2w) │ │ |
  • | └───────────────────────┘ │ └─────────────────┘ │ |
  • | Area = 2w(l + b + 2w) └─────────────────────────┘ |
  • | Area = 2w(l + b - 2w) |
  • +─────────────────────────────────────────────────────────────+
  • 2. Square (Side a a a )

Area = a 2 = d 2 2 \text{Area} = a^2 = \frac{d^2}{2} Area = a 2 = 2 d 2 ​ .

Perimeter = 4 a \text{Perimeter} = 4a Perimeter = 4 a , Diagonal d = a 2 \text{Diagonal } d = a\sqrt{2} Diagonal d = a 2 ​ .

Inradius r = a / 2 r = a/2 r = a /2 ; Circumradius R = a / 2 R = a/\sqrt{2} R = a / 2 ​ .

3. Parallelogram (Sides a , b a, b a , b and Height h h h )

Area = base × height = a × h = a b sin ⁡ θ \text{Area} = \text{base} \times \text{height} = a \times h = ab \sin \theta Area = base × height = a × h = ab sin θ .

Diagonal Identity: The sum of the squares of the diagonals equals the sum of the squares of all four sides: d 1 2 + d 2 2 = 2 ( a 2 + b 2 ) d_1^2 + d_2^2 = 2(a^2 + b^2) d 1 2 ​ + d 2 2 ​ = 2 ( a 2 + b 2 )

4. Rhombus (Side a a a , Diagonals d 1 , d 2 d_1, d_2 d 1 ​ , d 2 ​ )

All four sides are equal; diagonals bisect each other at right angles ( 90 ∘ 90^\circ 9 0 ∘ ).

Area: Area = 1 2 d 1 d 2 \text{Area} = \frac{1}{2} d_1 d_2 Area = 2 1 ​ d 1 ​ d 2 ​

Side-Diagonal Fundamental Identity: ( d 1 2 ) 2 + ( d 2 2 ) 2 = a 2 ⟺ d 1 2 + d 2 2 = 4 a 2 \left(\frac{d_1}{2}\right)^2 + \left(\frac{d_2}{2}\right)^2 = a^2 \iff d_1^2 + d_2^2 = 4a^2 ( 2 d 1 ​ ​ ) 2 + ( 2 d 2 ​ ​ ) 2 = a 2 ⟺ d 1 2 ​ + d 2 2 ​ = 4 a 2 a = 1 2 d 1 2 + d 2 2 , Perimeter = 4 a = 2 d 1 2 + d 2 2 a = \frac{1}{2}\sqrt{d_1^2 + d_2^2}, \quad \text{Perimeter} = 4a = 2\sqrt{d_1^2 + d_2^2} a = 2 1 ​ d 1 2 ​ + d 2 2 ​ ​ , Perimeter = 4 a = 2 d 1 2 ​ + d 2 2 ​ ​

  • 5. Trapezium / Trapezoid (Parallel Sides a a a and b b b , Height h h h )
  • Area: Area = 1 2 ( a + b ) h \text{Area} = \frac{1}{2}(a + b)h Area = 2 1 ​ ( a + b ) h

Median Rule: The line segment connecting the midpoints of the non-parallel sides has length m = a + b 2 m = \frac{a+b}{2} m = 2 a + b ​ . Thus: Area = Median × h \text{Area} = \text{Median} \times h Area = Median × h

Important

Isosceles Trapezium Property: If the non-parallel sides are equal, the trapezium is cyclic (can be inscribed in a circle), and base angles are equal.

  • Circles, Sectors, Segments & Annulus Systems
  • 1. Fundamental Circle & Semicircle Metrics

Full Circle: Area = π r 2 \text{Area} = \pi r^2 Area = π r 2 , Circumference = 2 π r = π d \text{Circumference} = 2\pi r = \pi d Circumference = 2 π r = π d .

Semicircle: Area = 1 2 π r 2 \text{Area} = \frac{1}{2}\pi r^2 Area = 2 1 ​ π r 2 .

Perimeter of Semicircle: Unlike circumference, the perimeter includes the straight diameter boundary: Perimeter = π r + 2 r = r ( π + 2 ) ≈ r ( 22 7 + 2 ) = 36 7 r ( when π ≈ 22 / 7 ) \text{Perimeter} = \pi r + 2r = r(\pi + 2) \approx r\left(\frac{22}{7} + 2\right) = \frac{36}{7}r \quad (\text{when } \pi \approx 22/7) Perimeter = π r + 2 r = r ( π + 2 ) ≈ r ( 7 22 ​ + 2 ) = 7 36 ​ r ( when π ≈ 22/7 )

Quadrant (Quarter Circle): Area = 1 4 π r 2 \text{Area} = \frac{1}{4}\pi r^2 Area = 4 1 ​ π r 2 .

Perimeter = 1 2 π r + 2 r = r ( π 2 + 2 ) ≈ r ( 11 7 + 2 ) = 25 7 r \text{Perimeter} = \frac{1}{2}\pi r + 2r = r\left(\frac{\pi}{2} + 2\right) \approx r\left(\frac{11}{7} + 2\right) = \frac{25}{7}r Perimeter = 2 1 ​ π r + 2 r = r ( 2 π ​ + 2 ) ≈ r ( 7 11 ​ + 2 ) = 7 25 ​ r .

2. Sectors and Segments of a Circle

For a sector subtending central angle θ \theta θ (in degrees), use the minor-segment formula below for 0 < θ ≤ 180 ∘ 0<\theta\le180^\circ 0 < θ ≤ 18 0 ∘ :

Arc Length ( l l l ): l = θ 360 ∘ × 2 π r l = \frac{\theta}{360^\circ} \times 2\pi r l = 36 0 ∘ θ ​ × 2 π r

Sector Area: Area = θ 360 ∘ × π r 2 = 1 2 l r \text{Area} = \frac{\theta}{360^\circ} \times \pi r^2 = \frac{1}{2} l r Area = 36 0 ∘ θ ​ × π r 2 = 2 1 ​ l r

Area of Segment: The region bounded by a chord and arc: Area of Minor Segment = Area of Sector − Area of Δ = θ 360 ∘ π r 2 − 1 2 r 2 sin ⁡ θ \text{Area of Minor Segment} = \text{Area of Sector} - \text{Area of } \Delta = \frac{\theta}{360^\circ}\pi r^2 - \frac{1}{2}r^2 \sin \theta Area of Minor Segment = Area of Sector − Area of Δ = 36 0 ∘ θ ​ π r 2 − 2 1 ​ r 2 sin θ

3. Annulus / Circular Ring

The area bounded between two concentric circles of outer radius R R R and inner radius r r r (track width w = R − r w = R - r w = R − r ): Area = π ( R 2 − r 2 ) = π ( R + r ) ( R − r ) \text{Area} = \pi(R^2 - r^2) = \pi(R + r)(R - r) Area = π ( R 2 − r 2 ) = π ( R + r ) ( R − r )

Tip

The Tangent-Chord Annulus Heuristic: If a chord of the outer circle of length 2 x 2x 2 x is tangent to the inner concentric circle, the chord is bisected at the point of tangency, creating right triangle with legs r , x r, x r , x and hypotenuse R R R . Therefore, R 2 − r 2 = x 2 R^2 - r^2 = x^2 R 2 − r 2 = x 2 . The area of the circular track is instantly: Area = π ( R 2 − r 2 ) = π x 2 = π 4 ( Chord Length ) 2 \text{Area} = \pi(R^2 - r^2) = \pi x^2 = \frac{\pi}{4}(\text{Chord Length})^2 Area = π ( R 2 − r 2 ) = π x 2 = 4 π ​ ( Chord Length ) 2

4. Classical Shaded Region Problems

Four Equal Circles at Square Vertices: Place four radius- r r r circles with centers at the vertices of a square of side 2 r 2r 2 r . Adjacent circles touch; this explicitly stipulated square arrangement gives: The enclosed central shaded region is: Shaded Area = Area of Square − 4 × ( Quadrant Area ) = ( 2 r ) 2 − π r 2 = ( 4 − π ) r 2 ≈ 6 7 r 2 \text{Shaded Area} = \text{Area of Square} - 4 \times (\text{Quadrant Area}) = (2r)^2 - \pi r^2 = (4 - \pi)r^2 \approx \frac{6}{7}r^2 Shaded Area = Area of Square − 4 × ( Quadrant Area ) = ( 2 r ) 2 − π r 2 = ( 4 − π ) r 2 ≈ 7 6 ​ r 2

Regular Polygons

For any regular polygon with n n n equal sides and side length a a a :

Polygon Parameter Mathematical Formula Hexagon ( n = 6 n=6 n = 6 ) Value

Sum of Interior Angles ( n − 2 ) × 180 ∘ (n - 2) \times 180^\circ ( n − 2 ) × 18 0 ∘ 4 × 180 ∘ = 720 ∘ 4 \times 180^\circ = 720^\circ 4 × 18 0 ∘ = 72 0 ∘

Each Interior Angle ( n − 2 ) × 180 ∘ n \frac{(n - 2) \times 180^\circ}{n} n ( n − 2 ) × 18 0 ∘ ​ 720 ∘ 6 = 120 ∘ \frac{720^\circ}{6} = 120^\circ 6 72 0 ∘ ​ = 12 0 ∘

Sum of Exterior Angles 360 ∘ 360^\circ 36 0 ∘ (for a convex polygon, taking one exterior turn at each vertex) 360 ∘ 360^\circ 36 0 ∘

Each Exterior Angle 360 ∘ n = 180 ∘ − Interior Angle \frac{360^\circ}{n} = 180^\circ - \text{Interior Angle} n 36 0 ∘ ​ = 18 0 ∘ − Interior Angle 360 ∘ 6 = 60 ∘ \frac{360^\circ}{6} = 60^\circ 6 36 0 ∘ ​ = 6 0 ∘

Number of Diagonals n ( n − 3 ) 2 \frac{n(n - 3)}{2} 2 n ( n − 3 ) ​ 6 × 3 2 = 9 \frac{6 \times 3}{2} = 9 2 6 × 3 ​ = 9

Area of Regular Polygon n a 2 4 cot ⁡ ( 180 ∘ n ) \frac{n a^2}{4} \cot\left(\frac{180^\circ}{n}\right) 4 n a 2 ​ cot ( n 18 0 ∘ ​ ) 6 × 3 4 a 2 = 3 3 2 a 2 6 \times \frac{\sqrt{3}}{4}a^2 = \frac{3\sqrt{3}}{2}a^2 6 × 4 3 ​ ​ a 2 = 2 3 3 ​ ​ a 2

Note

A regular hexagon of side a a a decomposes cleanly into six identical equilateral triangles of side a a a . Its total area is simply 6 × ( 3 4 a 2 ) = 3 3 2 a 2 ≈ 2.598 a 2 6 \times \left(\frac{\sqrt{3}}{4}a^2\right) = \frac{3\sqrt{3}}{2}a^2 \approx 2.598 a^2 6 × ( 4 3 ​ ​ a 2 ) = 2 3 3 ​ ​ a 2 ≈ 2.598 a 2 .

  • Worked Examples
  • Worked Example 1: Rhombus Land Parcel & Paving Cost

Problem: A railway goods siding plot is laid out in the shape of a rhombus. The perimeter of the plot is 104 m 104\text{ m} 104 m , and one of its diagonals measures 48 m 48\text{ m} 48 m . Calculate: (a) the length of the second diagonal, (b) the total surface area of the plot, and (c) the cost of leveling the plot at ₹15 per m 2 \text{m}^2 m 2 .

Step 1: Compute Side Length of Rhombus: Perimeter = 4 a = 104 m ⟹ a = 104 4 = 26 m \text{Perimeter} = 4a = 104\text{ m} \implies a = \frac{104}{4} = 26\text{ m} Perimeter = 4 a = 104 m ⟹ a = 4 104 ​ = 26 m

Step 2: Determine Half-Diagonal Lengths: Given diagonal d 1 = 48 m d_1 = 48\text{ m} d 1 ​ = 48 m , half-diagonal is d 1 / 2 = 24 m d_1 / 2 = 24\text{ m} d 1 ​ /2 = 24 m .

Since diagonals of a rhombus bisect each other perpendicularly: a 2 = ( d 1 2 ) 2 + ( d 2 2 ) 2 a^2 = \left(\frac{d_1}{2}\right)^2 + \left(\frac{d_2}{2}\right)^2 a 2 = ( 2 d 1 ​ ​ ) 2 + ( 2 d 2 ​ ​ ) 2 26 2 = 24 2 + ( d 2 2 ) 2 ⟹ 676 = 576 + ( d 2 2 ) 2 26^2 = 24^2 + \left(\frac{d_2}{2}\right)^2 \implies 676 = 576 + \left(\frac{d_2}{2}\right)^2 2 6 2 = 2 4 2 + ( 2 d 2 ​ ​ ) 2 ⟹ 676 = 576 + ( 2 d 2 ​ ​ ) 2 ( d 2 2 ) 2 = 676 − 576 = 100 ⟹ d 2 2 = 10 m \left(\frac{d_2}{2}\right)^2 = 676 - 576 = 100 \implies \frac{d_2}{2} = 10\text{ m} ( 2 d 2 ​ ​ ) 2 = 676 − 576 = 100 ⟹ 2 d 2 ​ ​ = 10 m

Step 3: Compute Full Second Diagonal Length: d 2 = 2 × 10 = 20 m d_2 = 2 \times 10 = 20\text{ m} d 2 ​ = 2 × 10 = 20 m

Step 4: Compute Total Area: Area = 1 2 d 1 d 2 = 1 2 × 48 × 20 = 480 m 2 \text{Area} = \frac{1}{2} d_1 d_2 = \frac{1}{2} \times 48 \times 20 = 480\text{ m}^2 Area = 2 1 ​ d 1 ​ d 2 ​ = 2 1 ​ × 48 × 20 = 480 m 2

Step 5: Compute Total Cost: Cost = 480 m 2 × INR 15 / m 2 = INR 7 , 200 \text{Cost} = 480\text{ m}^2 \times \text{INR } 15/\text{m}^2 = \text{INR } 7,200 Cost = 480 m 2 × INR 15/ m 2 = INR 7 , 200

Worked Example 2: Railway Track Formation Cross-Section (Trapezium)

Problem: A broad-gauge railway embankment has a trapezoidal cross-section. The top formation width is 12 m 12\text{ m} 12 m , the base width is 18 m 18\text{ m} 18 m , and the vertical height of the embankment is 4 m 4\text{ m} 4 m . Determine: (a) the cross-sectional area of the embankment, and (b) the total volume of earthwork needed to construct a 500 m 500\text{ m} 500 m section of this track embankment.

Step 1: Compute Cross-Sectional Area: Area = 1 2 ( a + b ) h = 1 2 ( 12 + 18 ) × 4 = 1 2 × 30 × 4 = 60 m 2 \text{Area} = \frac{1}{2}(a + b)h = \frac{1}{2}(12 + 18) \times 4 = \frac{1}{2} \times 30 \times 4 = 60\text{ m}^2 Area = 2 1 ​ ( a + b ) h = 2 1 ​ ( 12 + 18 ) × 4 = 2 1 ​ × 30 × 4 = 60 m 2

Step 2: Compute Earthwork Volume over 500 m 500\text{ m} 500 m Track Length: Volume = Cross-Sectional Area × Length = 60 m 2 × 500 m = 30 , 000 m 3 \text{Volume} = \text{Cross-Sectional Area} \times \text{Length} = 60\text{ m}^2 \times 500\text{ m} = 30,000\text{ m}^3 Volume = Cross-Sectional Area × Length = 60 m 2 × 500 m = 30 , 000 m 3

Worked Example 3: Annulus Turntable Inspection Pathway

Problem: A circular locomotive turntable pit of radius r = 14 m r = 14\text{ m} r = 14 m is surrounded by an outer concrete inspection walkway of uniform width w = 3.5 m w = 3.5\text{ m} w = 3.5 m . Using π = 22 / 7 \pi = 22/7 π = 22/7 , calculate: (a) the outer radius R R R , (b) the area of the inspection walkway, and (c) the total expenditure of paving the pathway at ₹80 per m 2 \text{m}^2 m 2 .

Step 1: Determine Outer Radius: R = r + w = 14 + 3.5 = 17.5 m = 35 2 m R = r + w = 14 + 3.5 = 17.5\text{ m} = \frac{35}{2}\text{ m} R = r + w = 14 + 3.5 = 17.5 m = 2 35 ​ m

Step 2: Express Area via Difference of Squares: Area = π ( R 2 − r 2 ) = π ( R + r ) ( R − r ) \text{Area} = \pi(R^2 - r^2) = \pi(R + r)(R - r) Area = π ( R 2 − r 2 ) = π ( R + r ) ( R − r ) R + r = 17.5 + 14 = 31.5 m = 63 2 m , R − r = 3.5 m = 7 2 m R + r = 17.5 + 14 = 31.5\text{ m} = \frac{63}{2}\text{ m}, \quad R - r = 3.5\text{ m} = \frac{7}{2}\text{ m} R + r = 17.5 + 14 = 31.5 m = 2 63 ​ m , R − r = 3.5 m = 2 7 ​ m

Step 3: Calculate Walkway Area: Area = 22 7 × 63 2 × 7 2 = 11 × 63 2 = 693 2 = 346.5 m 2 \text{Area} = \frac{22}{7} \times \frac{63}{2} \times \frac{7}{2} = 11 \times \frac{63}{2} = \frac{693}{2} = 346.5\text{ m}^2 Area = 7 22 ​ × 2 63 ​ × 2 7 ​ = 11 × 2 63 ​ = 2 693 ​ = 346.5 m 2

Step 4: Calculate Total Paving Cost: Cost = 346.5 × 80 = INR 27 , 720 \text{Cost} = 346.5 \times 80 = \text{INR } 27,720 Cost = 346.5 × 80 = INR 27 , 720

Calculation Traps & Speed Heuristics

The Semicircle Perimeter Trap ( P = π r P = \pi r P = π r vs. π r + 2 r \pi r + 2r π r + 2 r ): A common perimeter error is taking the perimeter of a semicircle as π r \pi r π r . That is only the curved arc! The full perimeter includes the straight diameter: P = π r + 2 r = 36 7 r P = \pi r + 2r = \frac{36}{7}r P = π r + 2 r = 7 36 ​ r . When an exercise stipulates π = 22 / 7 \pi=22/7 π = 22/7 and gives P = 108 m P = 108\text{ m} P = 108 m , immediately write 36 7 r = 108 ⟹ r = 21 m \frac{36}{7}r = 108 \implies r = 21\text{ m} 7 36 ​ r = 108 ⟹ r = 21 m .

The Diagonal-Area Relation in Squares ( a 2 a^2 a 2 vs. d 2 / 2 d^2/2 d 2 /2 ): Never waste time finding side a a a from diagonal d d d by computing a = d / 2 a = d/\sqrt{2} a = d / 2 ​ . Directly square the diagonal and divide by 2: Area = d 2 / 2 \text{Area} = d^2/2 Area = d 2 /2 . If diagonal is 12 cm 12\text{ cm} 12 cm , area is 144 / 2 = 72 cm 2 144/2 = 72\text{ cm}^2 144/2 = 72 cm 2 .

The Polygon Interior-Exterior Shortcut: When a problem states "each interior angle of a regular polygon is 150 ∘ 150^\circ 15 0 ∘ " , avoid solving ( n − 2 ) × 180 n = 150 \frac{(n-2) \times 180}{n} = 150 n ( n − 2 ) × 180 ​ = 150 . Immediately compute the exterior angle: Ext Angle = 180 ∘ − 150 ∘ = 30 ∘ \text{Ext Angle} = 180^\circ - 150^\circ = 30^\circ Ext Angle = 18 0 ∘ − 15 0 ∘ = 3 0 ∘ . Then the number of sides is n = 360 ∘ 30 ∘ = 12 n = \frac{360^\circ}{30^\circ} = 12 n = 3 0 ∘ 36 0 ∘ ​ = 12 sides.