Study guide

5.3 Upstream, Downstream Boat Velocity, Still Water Speed & Circular Track Races

RRB Section Controller 2026: Free Written CBT Study Guide Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Exam Overview & Operational Profile

1.1 Written CBT Pattern, Scoring & Selection 1.2 Eligibility, Documents & A-2 Medical Requirements

2 Chapter 2: Number Systems & Arithmetic Foundations

2.1 Number Systems, Divisibility Rules, Prime Factorization & Remainder Theorem 2.2 Unit Digits, Cyclicity Rules & Power Modulo Calculations 2.3 HCF and LCM Properties, Prime Factorization & Practical Word Problems 2.4 Fractions, Decimals, Surds, Indices & BODMAS Simplification

3 Chapter 3: Commercial Arithmetic: Percentages, Profit & Rates

3.1 Percentages, Fractional Equivalents, Successive Variations & Population Formulas 3.2 Cost Price, Selling Price, Profit/Loss Percentage, Dishonest Dealer & Discount Schemes 3.3 Simple Interest, Compound Interest Formulas, Annual/Semi-Annual Compounding & Difference Traps

4 Chapter 4: Ratios, Proportions, Mixtures & Partnerships

4.1 Ratios, Duplicate/Sub-Duplicate Ratios, Direct and Inverse Variations & Proportional Sharing 4.2 Averages, Change in Average, Batsman/Bowling Averages & Replacement Problems 4.3 Rule of Alligation, Removal-Replacement Mixtures & Partnership Capital-Time Sharing

5 Chapter 5: Motion Dynamics, Time, Distance & Train Logistics

5.1 Time, Speed, Distance Relations, Average Speed & Unit Conversions 5.2 Train Problems: Passing Poles, Platforms, Moving Objects & Relative Speed in Opposite/Same Directions 5.3 Upstream, Downstream Boat Velocity, Still Water Speed & Circular Track Races

6 Chapter 6: Work Efficiency, Pipes & Operational Scheduling

6.1 Individual and Group Work, Efficiency Ratios, Work Equivalences & Mandays Formula 6.2 Alternate Day Working, Negative Work & Wage Distribution Based on Work Done 6.3 Inlet and Outlet Pipes, Net Filling Rate, Alternating Flow & Tank Leakage Problems

7 Chapter 7: Algebra, Linear Equations & Progressions

7.1 Algebraic Identities, Polynomial Factorization & Systems of Linear Equations in Two Variables 7.2 Quadratic Equations, Nature of Roots, Discriminant Analysis & Maximum/Minimum Values 7.3 Arithmetic Progressions (AP), General Term, Sum of n Terms & Sequence Modeling

8 Chapter 8: Mensuration: 2D Areas & 3D Solids

8.1 Lines, Angles, Triangle Theorems, Congruence/Similarity & Circle Tangent Properties 8.2 Perimeter and Area of Quadrilaterals, Polygons, Circles & Shaded Region Problems 8.3 Surface Area and Volume of Cubes, Cuboids, Cylinders, Cones, Spheres & Melting-Recasting Solids

9 Chapter 9: Statistics, Probability & Data Interpretation

9.1 Mean, Median, Mode, Range, Mean Deviation & Standard Deviation 9.2 Permutations, Combinations, Classical Probability, Independent Events & Odds 9.3 Tabular Data Interpretation, Bar Charts, Grouped Graphs & Percentage Calculation Shortcuts 9.4 Pie Charts (Angle vs Percentage), Line Trend Graphs & Quantitative Data Sufficiency

10 Chapter 10: Multi-Source & Graphical Analysis

10.1 Multi-Source Analysis, Set Data & Arrangement 10.2 Scatter Plots, Histograms & Distribution Curves

11 Chapter 11: Deductive Logic, Statements & Binary Puzzles

11.1 Syllogisms, Sets & Possibility Conclusions 11.2 Critical Reasoning: Implicit Assumptions, Strong vs Weak Arguments & Course of Action 11.3 Binary Logic: Truth-Tellers, Liars, Alternators & Matrix Logic Deductions

12 Chapter 12: Relational, Directional, Clock & Calendar Reasoning

12.1 Direct Family Relations, Coded Blood Relations & Family Tree Tree-Mapping Methods 12.2 Cardinal & Ordinal Directions, Multi-Step Turn Paths, Pythagorean Distance & Shadow Timing 12.3 Clock Hands Angular Speed, Angle Between Hands at Given Time, Coincidence & Faulty Clocks 12.4 Odd Days Concept, Reference Date Calculations, Leap Year Rules & Repeating Calendar Years

13 Chapter 13: English Reading Comprehension

13.1 English Comprehension: Main Idea, Support & Inference 13.2 English Comprehension: Application, Structure & Style

14 Chapter 14: Mental Reasoning: Analogies & Series

14.1 Semantic, Letter & Number Analogies 14.2 Number Series: Differences, Powers & Missing Terms 14.3 Interleaved, Recursive & Wrong-Term Series

15 Chapter 15: Mental Reasoning: Coding & Ranking

15.1 Letter Shifts, Reversal & Numerical Codes 15.2 Message Intersections & Conditional Coding Tables 15.3 Ranking, People Between & Position Interchanges

16 Chapter 16: Mental Reasoning: Seating Arrangements

16.1 Linear Seating & Parallel Rows 16.2 Circular Seating, Facing & Rotational Symmetry

5.3 Upstream, Downstream Boat Velocity, Still Water Speed & Circular Track Races

Key Takeaways Explain This Topic AI

In fluid stream kinematics, downstream velocity is D = u + v D = u + v D = u + v and upstream velocity is U = u − v U = u - v U = u − v , yielding still water speed u = D + U 2 u = \frac{D + U}{2} u = 2 D + U ​ and stream current speed v = D − U 2 v = \frac{D - U}{2} v = 2 D − U ​ .

The round-trip average speed over equal upstream and downstream stretches is V avg = u 2 − v 2 u = u ( 1 − v 2 u 2 ) V_{\text{avg}} = \frac{u^2 - v^2}{u} = u\left(1 - \frac{v^2}{u^2}\right) V avg ​ = u u 2 − v 2 ​ = u ( 1 − u 2 v 2 ​ ) , which is less than u u u when 0 < v < u 0<v<u 0 < v < u and equals u u u when the current is zero.

When two vessels travel towards each other along a river, their relative closing speed is ( u 1 + v ) + ( u 2 − v ) = u 1 + u 2 (u_1 + v) + (u_2 - v) = u_1 + u_2 ( u 1 ​ + v ) + ( u 2 ​ − v ) = u 1 ​ + u 2 ​ , rendering the current velocity completely irrelevant to the closing rate.

In linear races, handicaps are expressed as distance starts ("A gives B a start of x x x meters") or time starts ("A gives B a start of t t t seconds"); when A beats B by x x x meters or t t t seconds, B's speed is uniquely defined as S B = x t S_B = \frac{x}{t} S B ​ = t x ​ .

For constant-speed runners starting simultaneously from one point, the first later meeting is L/(u+v) in opposite directions or L/|u-v| in the same direction with unequal speeds. A reduced rational speed ratio a:b gives a+b or |a-b| distinct meeting points respectively.

Last updated: October 2026

Kinematic Mechanics of Boats and Streams

When a vessel moves in a fluid medium, its net ground speed is the vector sum of its propulsion velocity and the fluid's velocity. DOWNSTREAM MOTION (Vessel moving WITH the stream current):

  • ──► Boat Speed u ──► Stream Speed v
  • Net Ground Speed D = u + v

UPSTREAM MOTION (Vessel moving AGAINST the stream current):

  • ◄── Boat Speed u ──► Stream Speed v
  • Net Ground Speed U = u - v (Constraint: u > v for forward progress)
  • Primary Vector Decompositions

Let:

  • u = u = u = Speed of boat in still water
  • v = v = v = Speed of stream (river current)
  • D = D = D = Downstream speed (motion in direction of river flow)
  • U = U = U = Upstream speed (motion against direction of river flow)

From the physical definitions: D = u + v — (1) D = u + v \quad \text{--- (1)} D = u + v — (1) U = u − v — (2) U = u - v \quad \text{--- (2)} U = u − v — (2)

Adding (1) and (2) yields the still water speed u u u : D + U = 2 u ⟹ u = D + U 2 D + U = 2u \implies u = \frac{D + U}{2} D + U = 2 u ⟹ u = 2 D + U ​

Subtracting (2) from (1) yields the stream current speed v v v : D − U = 2 v ⟹ v = D − U 2 D - U = 2v \implies v = \frac{D - U}{2} D − U = 2 v ⟹ v = 2 D − U ​

  • Variable Formula Plain Language Description
  • Downstream Speed ( D D D ) u + v u + v u + v Sum of still water engine speed and river current
  • Upstream Speed ( U U U ) u − v u - v u − v Upstream ground speed after subtracting current speed

Still Water Speed ( u u u ) D + U 2 \frac{D + U}{2} 2 D + U ​ Arithmetic average of downstream and upstream speeds

Stream Speed ( v v v ) D − U 2 \frac{D - U}{2} 2 D − U ​ Half the difference between downstream and upstream speeds

Ratio of Upstream and Downstream Times for Equal Distance

For a fixed distance d d d , let T u T_u T u ​ be upstream time and T d T_d T d ​ be downstream time: T u = d u − v , T d = d u + v T_u = \frac{d}{u - v}, \quad T_d = \frac{d}{u + v} T u ​ = u − v d ​ , T d ​ = u + v d ​ T u T d = u + v u − v \frac{T_u}{T_d} = \frac{u + v}{u - v} T d ​ T u ​ ​ = u − v u + v ​

The Time Multiplier Shortcut ( n n n times as long upstream)

If an exam question states that rowing upstream takes n n n times as long as rowing downstream for the same distance ( T u = n ⋅ T d T_u = n \cdot T_d T u ​ = n ⋅ T d ​ ): u + v u − v = n ⟹ u + v = n ( u − v ) ⟹ u ( n − 1 ) = v ( n + 1 ) \frac{u + v}{u - v} = n \implies u + v = n(u - v) \implies u(n - 1) = v(n + 1) u − v u + v ​ = n ⟹ u + v = n ( u − v ) ⟹ u ( n − 1 ) = v ( n + 1 ) u = v ( n + 1 n − 1 ) u = v \left(\frac{n + 1}{n - 1}\right) u = v ( n − 1 n + 1 ​ )

The Round-Trip Stream Velocity Trap

Suppose a boat rows distance d d d downstream and returns the same distance d d d upstream:

Total Distance = 2 d = 2d = 2 d

Total Time = T d + T u = d u + v + d u − v = d ( ( u − v ) + ( u + v ) u 2 − v 2 ) = 2 d u u 2 − v 2 = T_d + T_u = \frac{d}{u + v} + \frac{d}{u - v} = d \left(\frac{(u - v) + (u + v)}{u^2 - v^2}\right) = \frac{2du}{u^2 - v^2} = T d ​ + T u ​ = u + v d ​ + u − v d ​ = d ( u 2 − v 2 ( u − v ) + ( u + v ) ​ ) = u 2 − v 2 2 d u ​

Average Speed: V avg = 2 d 2 d u u 2 − v 2 = u 2 − v 2 u = u ( 1 − v 2 u 2 ) V_{\text{avg}} = \frac{2d}{\frac{2du}{u^2 - v^2}} = \frac{u^2 - v^2}{u} = u \left(1 - \frac{v^2}{u^2}\right) V avg ​ = u 2 − v 2 2 d u ​ 2 d ​ = u u 2 − v 2 ​ = u ( 1 − u 2 v 2 ​ )

Note

For 0 < v < u 0<v<u 0 < v < u , because v 2 u 2 > 0 \frac{v^2}{u^2} > 0 u 2 v 2 ​ > 0 , the round-trip average speed V avg V_{\text{avg}} V avg ​ is strictly less than the still water speed u u u . The time saved with the current never compensates for the time lost fighting against it, because the craft spends more time traveling upstream at the lower speed.

Relative Speed of Two Craft in a River

When boats with still-water speeds u 1 , u 2 u_1,u_2 u 1 ​ , u 2 ​ move toward each other, one downstream and one upstream, through the same uniform current v v v (with u 2 > v u_2>v u 2 ​ > v ): Relative Approach Speed = ( u 1 + v ) + ( u 2 − v ) = u 1 + u 2 \text{Relative Approach Speed} = (u_1 + v) + (u_2 - v) = u_1 + u_2 Relative Approach Speed = ( u 1 ​ + v ) + ( u 2 ​ − v ) = u 1 ​ + u 2 ​

The stream velocity cancels out completely! The closing speed depends exclusively on their still water capabilities.

  • Linear Races, Handicaps & Dead Heats
  • In competitive sprint and distance races along a straight track of length L L L : Start Line Finish Line
  • │ │
  • ├── Runner A (Starts at 0 m) ────────────────────────────────────►│
  • │ │
  • │◄── Start x m ──► │
  • │ ├── Runner B (Starts at x m) ──────────────────►│
  • │ │
  • 1. Distance Handicap

"A gives B a start of x x x meters":

B is positioned x x x meters ahead of A at the starting signal.

A must run the full race course L L L .

B needs to cover only ( L − x ) (L - x) ( L − x ) meters.

If A beats B by y y y meters, then while A covers L L L meters, B covers only ( L − x − y ) (L - x - y) ( L − x − y ) meters.

Speed ratio: S A S B = L L − x − y \frac{S_A}{S_B} = \frac{L}{L - x - y} S B ​ S A ​ ​ = L − x − y L ​ .

2. Time Handicap

"A gives B a start of t t t seconds":

B begins running t t t seconds before A starts.

If A completes the race in T A T_A T A ​ seconds, B has been running for ( T A + t ) (T_A + t) ( T A ​ + t ) seconds.

3. The Golden Rule of Races

Important

If a question states: "A beats B by x x x meters or t t t seconds" , this means that when A crosses the finish line, B is still x x x meters away from the tape and takes another t t t seconds to reach it.

Consequently, the speed of the trailing runner B is immediately determined: S B = x t S_B = \frac{x}{t} S B ​ = t x ​

4. Dead Heat Condition

A race ends in a dead heat when finish instants are identical. With simultaneous starts, their elapsed race times are equal; with a time handicap, running durations can differ even though the finish instants match.

Circular Track Races: Periodic Concurrency & Rendezvous

Closed circular tracks of circumference L L L introduce periodic topology, where faster runners lap slower runners. 12 o'clock (Start Line)

▲

. ───┴─── .

  • ' │ '
  • / │ \
  • │ │ │ Track Circumference = L
  • │ O │ Runner A: Speed u
  • \ / Runner B: Speed v (u > v)

. .

  • ' . ___ . '
  • 1. Time to Meet for the First Time Anywhere on the Track

Opposite Directions: The two runners run towards each other. Their relative approach speed is u + v u + v u + v . The sum of their distances covered must equal one circumference L L L : T meet, opp = L u + v T_{\text{meet, opp}} = \frac{L}{u + v} T meet, opp ​ = u + v L ​

Same Direction: The faster runner must gain a lead of exactly one full lap ( L L L ) over the slower runner. Their relative separation speed is u − v u - v u − v : T meet, same = L u − v T_{\text{meet, same}} = \frac{L}{u - v} T meet, same ​ = u − v L ​

2. Time to Meet for the First Time at the STARTING Point

Both runners must be at the original starting point simultaneously:

  • Time for A to complete 1 full lap: t A = L u t_A = \frac{L}{u} t A ​ = u L ​
  • Time for B to complete 1 full lap: t B = L v t_B = \frac{L}{v} t B ​ = v L ​

A arrives at the start line at multiples of t A t_A t A ​ : { t A , 2 t A , 3 t A , … } \{t_A, 2t_A, 3t_A, \dots\} { t A ​ , 2 t A ​ , 3 t A ​ , … }

B arrives at the start line at multiples of t B t_B t B ​ : { t B , 2 t B , 3 t B , … } \{t_B, 2t_B, 3t_B, \dots\} { t B ​ , 2 t B ​ , 3 t B ​ , … }

The first time they coincide at the start line is the Lowest Common Multiple (LCM): T start = LCM ( t A , t B ) = LCM ( L u , L v ) T_{\text{start}} = \text{LCM}\left(t_A, t_B\right) = \text{LCM}\left(\frac{L}{u}, \frac{L}{v}\right) T start ​ = LCM ( t A ​ , t B ​ ) = LCM ( u L ​ , v L ​ )

Tip

LCM of Fractions Rule: For fractions p 1 q 1 \frac{p_1}{q_1} q 1 ​ p 1 ​ ​ and p 2 q 2 \frac{p_2}{q_2} q 2 ​ p 2 ​ ​ : LCM ( p 1 q 1 , p 2 q 2 ) = LCM ( p 1 , p 2 ) HCF ( q 1 , q 2 ) \text{LCM}\left(\frac{p_1}{q_1}, \frac{p_2}{q_2}\right) = \frac{\text{LCM}(p_1, p_2)}{\text{HCF}(q_1, q_2)} LCM ( q 1 ​ p 1 ​ ​ , q 2 ​ p 2 ​ ​ ) = HCF ( q 1 ​ , q 2 ​ ) LCM ( p 1 ​ , p 2 ​ ) ​

3. Number of Distinct Meeting Points on the Track

Reduce the ratio of their speeds to lowest irreducible integer terms: u v = a b , where gcd ⁡ ( a , b ) = 1 \frac{u}{v} = \frac{a}{b}, \quad \text{where } \gcd(a, b) = 1 v u ​ = b a ​ , where g cd ( a , b ) = 1

Running in the SAME direction: Number of distinct meeting points = a − b \text{Number of distinct meeting points} = a - b Number of distinct meeting points = a − b

These points divide the circumference into ( a − b ) (a - b) ( a − b ) equal arcs.

Running in OPPOSITE directions: Number of distinct meeting points = a + b \text{Number of distinct meeting points} = a + b Number of distinct meeting points = a + b

These points divide the circumference into ( a + b ) (a + b) ( a + b ) equal arcs.

4. Extension to Three Runners on a Circular Track

For three runners A, B, and C with lap times t A , t B , t C t_A, t_B, t_C t A ​ , t B ​ , t C ​ :

First meeting at the starting point: LCM ( t A , t B , t C ) \text{LCM}(t_A, t_B, t_C) LCM ( t A ​ , t B ​ , t C ​ )

First meeting anywhere on track: Find first meeting time between A and B ( t A B t_{AB} t A B ​ ), and between B and C ( t B C t_{BC} t BC ​ ). Then T = LCM ( t A B , t B C ) T = \text{LCM}(t_{AB}, t_{BC}) T = LCM ( t A B ​ , t BC ​ ) .

Assumptions behind the circular formulas

These formulas assume simultaneous departure from the same point, constant speeds and no stops. “First meeting” means the first meeting after departure. The same-direction lap formula assumes unequal speeds; equal-speed runners starting together remain together. LCM-based return formulas require commensurable lap times, as in the rational-number examples here. With different starting positions, first account for the initial separation rather than applying a full-lap formula directly.

  • Worked Examples
  • Worked Example 1: Simultaneous Upstream/Downstream Linear System

Problem: A motorized railway inspection boat operating along a river corridor travels 44 km 44 \text{ km} 44 km downstream and 30 km 30 \text{ km} 30 km upstream in a total time of 10 hours 10 \text{ hours} 10 hours . In another inspection trial, it travels 55 km 55 \text{ km} 55 km downstream and 40 km 40 \text{ km} 40 km upstream in 13 hours 13 \text{ hours} 13 hours . Determine:

The operational speed of the inspection boat in still water.

The velocity of the river current.

Step 1: Set up the simultaneous equations: Let downstream speed be D = u + v D = u + v D = u + v and upstream speed be U = u − v U = u - v U = u − v . 44 D + 30 U = 10 — (Equation 1) \frac{44}{D} + \frac{30}{U} = 10 \quad \text{--- (Equation 1)} D 44 ​ + U 30 ​ = 10 — (Equation 1) 55 D + 40 U = 13 — (Equation 2) \frac{55}{D} + \frac{40}{U} = 13 \quad \text{--- (Equation 2)} D 55 ​ + U 40 ​ = 13 — (Equation 2)

Step 2: Substitute reciprocal variables: Let x = 1 D x = \frac{1}{D} x = D 1 ​ and y = 1 U y = \frac{1}{U} y = U 1 ​ : 44 x + 30 y = 10 — (1) 44x + 30y = 10 \quad \text{--- (1)} 44 x + 30 y = 10 — (1) 55 x + 40 y = 13 — (2) 55x + 40y = 13 \quad \text{--- (2)} 55 x + 40 y = 13 — (2)

Step 3: Eliminate y y y by matching coefficients: Multiply (1) by 4: 176 x + 120 y = 40 176x + 120y = 40 176 x + 120 y = 40 Multiply (2) by 3: 165 x + 120 y = 39 165x + 120y = 39 165 x + 120 y = 39 Subtract the two equations: ( 176 x − 165 x ) = 40 − 39 ⟹ 11 x = 1 ⟹ x = 1 11 (176x - 165x) = 40 - 39 \implies 11x = 1 \implies x = \frac{1}{11} ( 176 x − 165 x ) = 40 − 39 ⟹ 11 x = 1 ⟹ x = 11 1 ​

Since x = 1 D = 1 11 x = \frac{1}{D} = \frac{1}{11} x = D 1 ​ = 11 1 ​ , Downstream Speed D = 11 km/h D = 11 \text{ km/h} D = 11 km/h .

Step 4: Solve for y y y and U U U : Substitute x = 1 11 x = \frac{1}{11} x = 11 1 ​ into (1): 44 ( 1 11 ) + 30 y = 10 ⟹ 4 + 30 y = 10 ⟹ 30 y = 6 ⟹ y = 6 30 = 1 5 44 \left(\frac{1}{11}\right) + 30y = 10 \implies 4 + 30y = 10 \implies 30y = 6 \implies y = \frac{6}{30} = \frac{1}{5} 44 ( 11 1 ​ ) + 30 y = 10 ⟹ 4 + 30 y = 10 ⟹ 30 y = 6 ⟹ y = 30 6 ​ = 5 1 ​

Since y = 1 U = 1 5 y = \frac{1}{U} = \frac{1}{5} y = U 1 ​ = 5 1 ​ , Upstream Speed U = 5 km/h U = 5 \text{ km/h} U = 5 km/h .

Step 5: Decompose into still water speed u u u and current v v v : u = D + U 2 = 11 + 5 2 = 16 2 = 8 km/h u = \frac{D + U}{2} = \frac{11 + 5}{2} = \frac{16}{2} = 8 \text{ km/h} u = 2 D + U ​ = 2 11 + 5 ​ = 2 16 ​ = 8 km/h v = D − U 2 = 11 − 5 2 = 6 2 = 3 km/h v = \frac{D - U}{2} = \frac{11 - 5}{2} = \frac{6}{2} = 3 \text{ km/h} v = 2 D − U ​ = 2 11 − 5 ​ = 2 6 ​ = 3 km/h

Conclusion: The boat speed in still water is 8 km/h , and the river current is 3 km/h .

Worked Example 2: Linear Race with Dual Handicaps

Problem: In a 1000 -meter 1000\text{-meter} 1000 -meter sprint trial at the Railway Sports Promotion Board athletics academy, runner A can give runner B a start of 50 meters 50 \text{ meters} 50 meters and still beat him by 10 seconds 10 \text{ seconds} 10 seconds . Alternatively, if runner A gives runner B a start of 20 seconds 20 \text{ seconds} 20 seconds , runner B beats runner A by 50 meters 50 \text{ meters} 50 meters . Determine the running speeds of runner A and runner B in meters per second.

Step 1: Formulate the kinematic equations: Let the speeds of runners A and B be S A S_A S A ​ and S B S_B S B ​ .

Scenario 1: A runs 1000 m 1000 \text{ m} 1000 m , B runs 1000 − 50 = 950 m 1000 - 50 = 950 \text{ m} 1000 − 50 = 950 m .

Time for A: T A = 1000 S A T_A = \frac{1000}{S_A} T A ​ = S A ​ 1000 ​ ; Time for B: T B = 950 S B T_B = \frac{950}{S_B} T B ​ = S B ​ 950 ​ .

A beats B by 10 seconds: 950 S B − 1000 S A = 10 — (Equation 1) \frac{950}{S_B} - \frac{1000}{S_A} = 10 \quad \text{--- (Equation 1)} S B ​ 950 ​ − S A ​ 1000 ​ = 10 — (Equation 1)

Scenario 2: B has a 20-second head start. When B finishes 1000 m 1000 \text{ m} 1000 m , A is 50 m behind the finish line (covers 950 m 950 \text{ m} 950 m ).

Time B ran: 1000 S B \frac{1000}{S_B} S B ​ 1000 ​ . Time A ran: 950 S A \frac{950}{S_A} S A ​ 950 ​ .

Since B started 20 seconds earlier: 1000 S B − 950 S A = 20 — (Equation 2) \frac{1000}{S_B} - \frac{950}{S_A} = 20 \quad \text{--- (Equation 2)} S B ​ 1000 ​ − S A ​ 950 ​ = 20 — (Equation 2)

Step 2: Solve the linear system: Let x = 1 S B x = \frac{1}{S_B} x = S B ​ 1 ​ and y = 1 S A y = \frac{1}{S_A} y = S A ​ 1 ​ : 950 x − 1000 y = 10 ⟹ 95 x − 100 y = 1 — (1) 950x - 1000y = 10 \implies 95x - 100y = 1 \quad \text{--- (1)} 950 x − 1000 y = 10 ⟹ 95 x − 100 y = 1 — (1) 1000 x − 950 y = 20 ⟹ 100 x − 95 y = 2 — (2) 1000x - 950y = 20 \implies 100x - 95y = 2 \quad \text{--- (2)} 1000 x − 950 y = 20 ⟹ 100 x − 95 y = 2 — (2)

Add (1) and (2): 195 x − 195 y = 3 ⟹ x − y = 3 195 = 1 65 — (3) 195x - 195y = 3 \implies x - y = \frac{3}{195} = \frac{1}{65} \quad \text{--- (3)} 195 x − 195 y = 3 ⟹ x − y = 195 3 ​ = 65 1 ​ — (3)

Subtract (1) from (2): 5 x + 5 y = 1 ⟹ x + y = 1 5 = 13 65 — (4) 5x + 5y = 1 \implies x + y = \frac{1}{5} = \frac{13}{65} \quad \text{--- (4)} 5 x + 5 y = 1 ⟹ x + y = 5 1 ​ = 65 13 ​ — (4)

Add (3) and (4): 2 x = 1 65 + 13 65 = 14 65 ⟹ x = 7 65 ⟹ S B = 65 7 ≈ 9.29 m/s 2x = \frac{1}{65} + \frac{13}{65} = \frac{14}{65} \implies x = \frac{7}{65} \implies S_B = \frac{65}{7} \approx 9.29 \text{ m/s} 2 x = 65 1 ​ + 65 13 ​ = 65 14 ​ ⟹ x = 65 7 ​ ⟹ S B ​ = 7 65 ​ ≈ 9.29 m/s

Subtract (3) from (4): 2 y = 13 65 − 1 65 = 12 65 ⟹ y = 6 65 ⟹ S A = 65 6 ≈ 10.83 m/s 2y = \frac{13}{65} - \frac{1}{65} = \frac{12}{65} \implies y = \frac{6}{65} \implies S_A = \frac{65}{6} \approx 10.83 \text{ m/s} 2 y = 65 13 ​ − 65 1 ​ = 65 12 ​ ⟹ y = 65 6 ​ ⟹ S A ​ = 6 65 ​ ≈ 10.83 m/s

Conclusion: Runner A's speed is 65 6 \frac{65}{6} 6 65 ​ m/s ( ≈ 10.83 \approx 10.83 ≈ 10.83 m/s), and Runner B's speed is 65 7 \frac{65}{7} 7 65 ​ m/s ( ≈ 9.29 \approx 9.29 ≈ 9.29 m/s).

Worked Example 3: Circular Testing Track Rendezvous Analysis

Problem: Two locomotives are undergoing continuous speed trials around a closed circular testing track of circumference 1200 meters 1200 \text{ meters} 1200 meters . Locomotive α \alpha α operates at a steady speed of 72 km/h 72 \text{ km/h} 72 km/h , and Locomotive β \beta β operates at 54 km/h 54 \text{ km/h} 54 km/h . Both depart from the same start line at the same instant. Determine:

The time elapsed before they meet for the first time if they travel in opposite directions.

The time elapsed before they meet for the first time if they travel in the same direction.

The time elapsed before they meet for the first time at the exact starting line.

The number of distinct meeting points along the track in both cases.

Step 1: Convert operational speeds to m/s \text{m/s} m/s : S α = 72 × 5 18 = 20 m/s S_\alpha = 72 \times \frac{5}{18} = 20 \text{ m/s} S α ​ = 72 × 18 5 ​ = 20 m/s S β = 54 × 5 18 = 15 m/s S_\beta = 54 \times \frac{5}{18} = 15 \text{ m/s} S β ​ = 54 × 18 5 ​ = 15 m/s

Step 2: First meeting anywhere on track:

In opposite directions: T meet, opp = L S α + S β = 1200 20 + 15 = 1200 35 = 240 7 ≈ 34.29 seconds T_{\text{meet, opp}} = \frac{L}{S_\alpha + S_\beta} = \frac{1200}{20 + 15} = \frac{1200}{35} = \frac{240}{7} \approx 34.29 \text{ seconds} T meet, opp ​ = S α ​ + S β ​ L ​ = 20 + 15 1200 ​ = 35 1200 ​ = 7 240 ​ ≈ 34.29 seconds

In the same direction: T meet, same = L S α − S β = 1200 20 − 15 = 1200 5 = 240 seconds = 4 minutes T_{\text{meet, same}} = \frac{L}{S_\alpha - S_\beta} = \frac{1200}{20 - 15} = \frac{1200}{5} = 240 \text{ seconds} = 4 \text{ minutes} T meet, same ​ = S α ​ − S β ​ L ​ = 20 − 15 1200 ​ = 5 1200 ​ = 240 seconds = 4 minutes

Step 3: First meeting at the starting point:

Lap time for α \alpha α : t α = 1200 20 = 60 seconds t_\alpha = \frac{1200}{20} = 60 \text{ seconds} t α ​ = 20 1200 ​ = 60 seconds

Lap time for β \beta β : t β = 1200 15 = 80 seconds t_\beta = \frac{1200}{15} = 80 \text{ seconds} t β ​ = 15 1200 ​ = 80 seconds T start = LCM ( t α , t β ) = LCM ( 60 , 80 ) = 240 seconds = 4 minutes T_{\text{start}} = \text{LCM}(t_\alpha, t_\beta) = \text{LCM}(60, 80) = 240 \text{ seconds} = 4 \text{ minutes} T start ​ = LCM ( t α ​ , t β ​ ) = LCM ( 60 , 80 ) = 240 seconds = 4 minutes

Step 4: Distinct meeting points: Ratio of speeds in lowest co-prime terms: S α S β = 20 15 = 4 3 ⟹ a = 4 , b = 3 , gcd ⁡ ( 4 , 3 ) = 1 \frac{S_\alpha}{S_\beta} = \frac{20}{15} = \frac{4}{3} \implies a = 4, b = 3, \quad \gcd(4, 3) = 1 S β ​ S α ​ ​ = 15 20 ​ = 3 4 ​ ⟹ a = 4 , b = 3 , g cd ( 4 , 3 ) = 1

Same direction: Number of points = a − b = 4 − 3 = 1 = a - b = 4 - 3 = 1 = a − b = 4 − 3 = 1 (the starting point itself).

Opposite directions: Number of points = a + b = 4 + 3 = 7 = a + b = 4 + 3 = 7 = a + b = 4 + 3 = 7 points (spaced every 1200 7 ≈ 171.43 m \frac{1200}{7} \approx 171.43 \text{ m} 7 1200 ​ ≈ 171.43 m ).

Conclusion: Opposite meeting time is 240 7 \frac{240}{7} 7 240 ​ s , same direction meeting time is 240 s , start point meeting time is 240 s , with 1 point (same) and 7 points (opposite).

Exam Traps & Common Pitfalls

Trap Description Erroneous Approach Correct Mathematical Procedure

Round-Trip Average Velocity Fallacy Assuming round-trip boat speed equals still water speed u u u For a nonzero current with 0 < v < u 0<v<u 0 < v < u , upstream delay dominates: V avg = u 2 − v 2 u < u V_{\text{avg}} = \frac{u^2 - v^2}{u} < u V avg ​ = u u 2 − v 2 ​ < u .

Relative Velocity in River Currents Factoring stream velocity v v v into relative speed of two approaching boats Currents act equally and oppositely: relative approach speed is strictly u 1 + u 2 u_1 + u_2 u 1 ​ + u 2 ​ .

Circular Meeting Point Reduction Error Using non-reduced ratio (e.g. 20 / 15 20/15 20/15 ) to compute points ( 20 − 15 = 5 20 - 15 = 5 20 − 15 = 5 ) Always reduce speed ratio to co-prime integers: 20 15 = 4 3 ⟹ 4 − 3 = 1 \frac{20}{15} = \frac{4}{3} \implies 4 - 3 = 1 15 20 ​ = 3 4 ​ ⟹ 4 − 3 = 1 point.

Start Line vs Anywhere Rendezvous Confusing first meeting anywhere with first meeting at start line First meeting anywhere uses L ∣ u ± v ∣ \frac{L}{\lvert u \pm v \rvert} ∣ u ± v ∣ L ​ ; start line meeting requires LCM ( t A , t B ) \text{LCM}(t_A, t_B) LCM ( t A ​ , t B ​ ) .

Race Handicap Distance vs Time Conflating "start of x x x meters" with "start of t t t seconds" A distance start alters distance to be run ( L − x L - x L − x ); a time start alters departure time ( T + t T + t T + t ).