Study guide
5.1 Time, Speed, Distance Relations, Average Speed & Unit Conversions
RRB Section Controller 2026: Free Written CBT Study Guide Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Exam Overview & Operational Profile
1.1 Written CBT Pattern, Scoring & Selection 1.2 Eligibility, Documents & A-2 Medical Requirements
2 Chapter 2: Number Systems & Arithmetic Foundations
2.1 Number Systems, Divisibility Rules, Prime Factorization & Remainder Theorem 2.2 Unit Digits, Cyclicity Rules & Power Modulo Calculations 2.3 HCF and LCM Properties, Prime Factorization & Practical Word Problems 2.4 Fractions, Decimals, Surds, Indices & BODMAS Simplification
3 Chapter 3: Commercial Arithmetic: Percentages, Profit & Rates
3.1 Percentages, Fractional Equivalents, Successive Variations & Population Formulas 3.2 Cost Price, Selling Price, Profit/Loss Percentage, Dishonest Dealer & Discount Schemes 3.3 Simple Interest, Compound Interest Formulas, Annual/Semi-Annual Compounding & Difference Traps
4 Chapter 4: Ratios, Proportions, Mixtures & Partnerships
4.1 Ratios, Duplicate/Sub-Duplicate Ratios, Direct and Inverse Variations & Proportional Sharing 4.2 Averages, Change in Average, Batsman/Bowling Averages & Replacement Problems 4.3 Rule of Alligation, Removal-Replacement Mixtures & Partnership Capital-Time Sharing
5 Chapter 5: Motion Dynamics, Time, Distance & Train Logistics
5.1 Time, Speed, Distance Relations, Average Speed & Unit Conversions 5.2 Train Problems: Passing Poles, Platforms, Moving Objects & Relative Speed in Opposite/Same Directions 5.3 Upstream, Downstream Boat Velocity, Still Water Speed & Circular Track Races
6 Chapter 6: Work Efficiency, Pipes & Operational Scheduling
6.1 Individual and Group Work, Efficiency Ratios, Work Equivalences & Mandays Formula 6.2 Alternate Day Working, Negative Work & Wage Distribution Based on Work Done 6.3 Inlet and Outlet Pipes, Net Filling Rate, Alternating Flow & Tank Leakage Problems
7 Chapter 7: Algebra, Linear Equations & Progressions
7.1 Algebraic Identities, Polynomial Factorization & Systems of Linear Equations in Two Variables 7.2 Quadratic Equations, Nature of Roots, Discriminant Analysis & Maximum/Minimum Values 7.3 Arithmetic Progressions (AP), General Term, Sum of n Terms & Sequence Modeling
8 Chapter 8: Mensuration: 2D Areas & 3D Solids
8.1 Lines, Angles, Triangle Theorems, Congruence/Similarity & Circle Tangent Properties 8.2 Perimeter and Area of Quadrilaterals, Polygons, Circles & Shaded Region Problems 8.3 Surface Area and Volume of Cubes, Cuboids, Cylinders, Cones, Spheres & Melting-Recasting Solids
9 Chapter 9: Statistics, Probability & Data Interpretation
9.1 Mean, Median, Mode, Range, Mean Deviation & Standard Deviation 9.2 Permutations, Combinations, Classical Probability, Independent Events & Odds 9.3 Tabular Data Interpretation, Bar Charts, Grouped Graphs & Percentage Calculation Shortcuts 9.4 Pie Charts (Angle vs Percentage), Line Trend Graphs & Quantitative Data Sufficiency
10 Chapter 10: Multi-Source & Graphical Analysis
10.1 Multi-Source Analysis, Set Data & Arrangement 10.2 Scatter Plots, Histograms & Distribution Curves
11 Chapter 11: Deductive Logic, Statements & Binary Puzzles
11.1 Syllogisms, Sets & Possibility Conclusions 11.2 Critical Reasoning: Implicit Assumptions, Strong vs Weak Arguments & Course of Action 11.3 Binary Logic: Truth-Tellers, Liars, Alternators & Matrix Logic Deductions
12 Chapter 12: Relational, Directional, Clock & Calendar Reasoning
12.1 Direct Family Relations, Coded Blood Relations & Family Tree Tree-Mapping Methods 12.2 Cardinal & Ordinal Directions, Multi-Step Turn Paths, Pythagorean Distance & Shadow Timing 12.3 Clock Hands Angular Speed, Angle Between Hands at Given Time, Coincidence & Faulty Clocks 12.4 Odd Days Concept, Reference Date Calculations, Leap Year Rules & Repeating Calendar Years
13 Chapter 13: English Reading Comprehension
13.1 English Comprehension: Main Idea, Support & Inference 13.2 English Comprehension: Application, Structure & Style
14 Chapter 14: Mental Reasoning: Analogies & Series
14.1 Semantic, Letter & Number Analogies 14.2 Number Series: Differences, Powers & Missing Terms 14.3 Interleaved, Recursive & Wrong-Term Series
15 Chapter 15: Mental Reasoning: Coding & Ranking
15.1 Letter Shifts, Reversal & Numerical Codes 15.2 Message Intersections & Conditional Coding Tables 15.3 Ranking, People Between & Position Interchanges
16 Chapter 16: Mental Reasoning: Seating Arrangements
16.1 Linear Seating & Parallel Rows 16.2 Circular Seating, Facing & Rotational Symmetry
5.1 Time, Speed, Distance Relations, Average Speed & Unit Conversions
Key Takeaways Explain This Topic AI
The foundational kinematic relation Distance = Speed × Time \text{Distance} = \text{Speed} \times \text{Time} Distance = Speed × Time requires strict dimensional consistency across metric and imperial systems, converted via 5 18 \frac{5}{18} 18 5 ( km/h → m/s \text{km/h} \to \text{m/s} km/h → m/s ) and 18 5 \frac{18}{5} 5 18 ( m/s → km/h \text{m/s} \to \text{km/h} m/s → km/h ).
Average speed is fundamentally Total Distance Total Time \frac{\text{Total Distance}}{\text{Total Time}} Total Time Total Distance ; for two equal distances traversed at speeds u u u and v v v , it simplifies to the harmonic mean 2 u v u + v \frac{2uv}{u+v} u + v 2 uv , whereas for equal travel durations, it equals the arithmetic mean u + v 2 \frac{u+v}{2} 2 u + v .
For three equal distance segments traversed at speeds u , v , w u, v, w u , v , w , average speed is given by 3 u v w u v + v w + w u \frac{3uvw}{uv + vw + wu} uv + v w + w u 3 uv w , while for arbitrary multi-leg journeys it is computed through weighted summation ∑ d i ∑ ( d i / s i ) \frac{\sum d_i}{\sum (d_i / s_i)} ∑ ( d i / s i ) ∑ d i .
Under constant distance, speed and time vary in inverse proportion ( S ∝ 1 / T S \propto 1/T S ∝ 1/ T ); running at a b \frac{a}{b} b a of standard booked speed resulting in a delay of t t t minutes implies a scheduled journey duration of a × t ∣ b − a ∣ \frac{a \times t}{|b - a|} ∣ b − a ∣ a × t .
Early-and-late arrival discrepancies under two test speeds S 1 S_1 S 1 and S 2 S_2 S 2 with total arrival time difference Δ T \Delta T Δ T yield the one-line distance formula: Distance = S 1 ⋅ S 2 ∣ S 1 − S 2 ∣ × Δ T \text{Distance} = \frac{S_1 \cdot S_2}{|S_1 - S_2|} \times \Delta T Distance = ∣ S 1 − S 2 ∣ S 1 ⋅ S 2 × Δ T .
Last updated: October 2026
The Core Kinematic Triad & Dimensional Consistency
The fundamental relationship connecting distance ( D D D ), speed ( S S S ), and elapsed time ( T T T ) is: Distance = Speed × Time ⟺ S = D T ⟺ T = D S \text{Distance} = \text{Speed} \times \text{Time} \iff S = \frac{D}{T} \iff T = \frac{D}{S} Distance = Speed × Time ⟺ S = T D ⟺ T = S D
While conceptually elementary, a common source of motion errors is dimensional inconsistency—combining speeds in kilometers per hour ( km/h \text{km/h} km/h ) with times in minutes or seconds, or distances in meters with speeds in km/h \text{km/h} km/h .
Metric Conversion Factors: The 5 / 18 5/18 5/18 and 18 / 5 18/5 18/5 Rules
To convert kilometers per hour to meters per second: 1 km/h = 1000 meters 3600 seconds = 10 36 = 5 18 m/s 1 \text{ km/h} = \frac{1000 \text{ meters}}{3600 \text{ seconds}} = \frac{10}{36} = \frac{5}{18} \text{ m/s} 1 km/h = 3600 seconds 1000 meters = 36 10 = 18 5 m/s
Conversely, to convert meters per second to kilometers per hour: 1 m/s = 1 / 1000 km 1 / 3600 h = 3600 1000 = 18 5 km/h = 3.6 km/h 1 \text{ m/s} = \frac{1 / 1000 \text{ km}}{1 / 3600 \text{ h}} = \frac{3600}{1000} = \frac{18}{5} \text{ km/h} = 3.6 \text{ km/h} 1 m/s = 1/3600 h 1/1000 km = 1000 3600 = 5 18 km/h = 3.6 km/h
Conversion Direction Multiplier Mnemonic Rule
km/h ⟶ m/s \text{km/h} \longrightarrow \text{m/s} km/h ⟶ m/s × 5 18 \times \frac{5}{18} × 18 5 Use 1000 / 3600 = 5 / 18 1000/3600=5/18 1000/3600 = 5/18
m/s ⟶ km/h \text{m/s} \longrightarrow \text{km/h} m/s ⟶ km/h × 18 5 \times \frac{18}{5} × 5 18 Use 3600 / 1000 = 18 / 5 3600/1000=18/5 3600/1000 = 18/5
Rapid Railway Speed Benchmarks
Mastery of the standard 18-times table enables instant mental conversion during CBT exams:
- Speed in m/s \text{m/s} m/s Multiplier Calculation Speed in km/h \text{km/h} km/h
- 5 m/s 5 \text{ m/s} 5 m/s 5 × 18 5 5 \times \frac{18}{5} 5 × 5 18 18 km/h 18 \text{ km/h} 18 km/h
- 10 m/s 10 \text{ m/s} 10 m/s 10 × 18 5 10 \times \frac{18}{5} 10 × 5 18 36 km/h 36 \text{ km/h} 36 km/h
- 15 m/s 15 \text{ m/s} 15 m/s 15 × 18 5 15 \times \frac{18}{5} 15 × 5 18 54 km/h 54 \text{ km/h} 54 km/h
- 20 m/s 20 \text{ m/s} 20 m/s 20 × 18 5 20 \times \frac{18}{5} 20 × 5 18 72 km/h 72 \text{ km/h} 72 km/h
- 25 m/s 25 \text{ m/s} 25 m/s 25 × 18 5 25 \times \frac{18}{5} 25 × 5 18 90 km/h 90 \text{ km/h} 90 km/h
- 30 m/s 30 \text{ m/s} 30 m/s 30 × 18 5 30 \times \frac{18}{5} 30 × 5 18 108 km/h 108 \text{ km/h} 108 km/h
- 35 m/s 35 \text{ m/s} 35 m/s 35 × 18 5 35 \times \frac{18}{5} 35 × 5 18 126 km/h 126 \text{ km/h} 126 km/h
- 40 m/s 40 \text{ m/s} 40 m/s 40 × 18 5 40 \times \frac{18}{5} 40 × 5 18 144 km/h 144 \text{ km/h} 144 km/h
- 45 m/s 45 \text{ m/s} 45 m/s 45 × 18 5 45 \times \frac{18}{5} 45 × 5 18 162 km/h 162 \text{ km/h} 162 km/h
- 50 m/s 50 \text{ m/s} 50 m/s 50 × 18 5 50 \times \frac{18}{5} 50 × 5 18 180 km/h 180 \text{ km/h} 180 km/h
- Imperial and Auxiliary Unit Conversions
Although Indian Railways operates on the metric system, historical bridge records and specific aptitude problems feature British Imperial units:
1 mile = 1.609344 km ≈ 1.6 km = 1600 meters 1 \text{ mile} = 1.609344 \text{ km} \approx 1.6 \text{ km} = 1600 \text{ meters} 1 mile = 1.609344 km ≈ 1.6 km = 1600 meters
1 mile = 1760 yards = 5280 feet 1 \text{ mile} = 1760 \text{ yards} = 5280 \text{ feet} 1 mile = 1760 yards = 5280 feet
1 yard = 3 feet = 36 inches 1 \text{ yard} = 3 \text{ feet} = 36 \text{ inches} 1 yard = 3 feet = 36 inches
1 foot = 12 inches = 30.48 cm = 0.3048 meters 1 \text{ foot} = 12 \text{ inches} = 30.48 \text{ cm} = 0.3048 \text{ meters} 1 foot = 12 inches = 30.48 cm = 0.3048 meters
60 mph = 88 ft/s = 96.56 km/h 60 \text{ mph} = 88 \text{ ft/s} = 96.56 \text{ km/h} 60 mph = 88 ft/s = 96.56 km/h
Average Speed Formulations
Average speed is total distance divided by total elapsed time. Equal durations justify an unweighted arithmetic mean; do not assume it for unequal speeds over unequal times.
Universal Definition Average Speed ( V avg ) = Total Distance Covered Total Time Elapsed = ∑ D i ∑ T i = D 1 + D 2 + ⋯ + D n D 1 S 1 + D 2 S 2 + ⋯ + D n S n \text{Average Speed } (V_{\text{avg}}) = \frac{\text{Total Distance Covered}}{\text{Total Time Elapsed}} = \frac{\sum D_i}{\sum T_i} = \frac{D_1 + D_2 + \dots + D_n}{\frac{D_1}{S_1} + \frac{D_2}{S_2} + \dots + \frac{D_n}{S_n}} Average Speed ( V avg ) = Total Time Elapsed Total Distance Covered = ∑ T i ∑ D i = S 1 D 1 + S 2 D 2 + ⋯ + S n D n D 1 + D 2 + ⋯ + D n
Special Case 1: Two Equal Distances at Speeds u u u and v v v (Harmonic Mean)
Suppose an express train travels from Station A to Station B (distance d d d ) at speed u u u , and returns from Station B to Station A (distance d d d ) at speed v v v .
Total Distance = d + d = 2 d = d + d = 2d = d + d = 2 d
Time outward: T 1 = d u T_1 = \frac{d}{u} T 1 = u d ; Time return: T 2 = d v T_2 = \frac{d}{v} T 2 = v d
Total Time: T 1 + T 2 = d u + d v = d ( u + v u v ) T_1 + T_2 = \frac{d}{u} + \frac{d}{v} = d \left(\frac{u + v}{uv}\right) T 1 + T 2 = u d + v d = d ( uv u + v )
Average Speed: V avg = 2 d d ( u + v u v ) = 2 u v u + v V_{\text{avg}} = \frac{2d}{d \left(\frac{u + v}{uv}\right)} = \frac{2uv}{u + v} V avg = d ( uv u + v ) 2 d = u + v 2 uv
Warning
If an exam question states that a locomotive travels a certain distance at 40 km/h and returns the same distance at 60 km/h, the average speed is NOT 40 + 60 2 = 50 km/h \frac{40 + 60}{2} = 50 \text{ km/h} 2 40 + 60 = 50 km/h . The correct average speed is 2 × 40 × 60 40 + 60 = 4800 100 = 48 km/h \frac{2 \times 40 \times 60}{40 + 60} = \frac{4800}{100} = 48 \text{ km/h} 40 + 60 2 × 40 × 60 = 100 4800 = 48 km/h . The locomotive spends more time at the slower speed, weighting the overall average downward.
Special Case 2: Three Equal Distances at Speeds u , v , u, v, u , v , and w w w
If a journey is divided into three equal distance segments d d d , traversed at speeds u , v , u, v, u , v , and w w w respectively: V avg = 3 d d u + d v + d w = 3 1 u + 1 v + 1 w = 3 u v w u v + v w + w u V_{\text{avg}} = \frac{3d}{\frac{d}{u} + \frac{d}{v} + \frac{d}{w}} = \frac{3}{\frac{1}{u} + \frac{1}{v} + \frac{1}{w}} = \frac{3uvw}{uv + vw + wu} V avg = u d + v d + w d 3 d = u 1 + v 1 + w 1 3 = uv + v w + w u 3 uv w
Special Case 3: Equal Travel Durations at Speeds u u u and v v v (Arithmetic Mean)
Suppose a freight train runs for time t t t at speed u u u , and then for an identical time t t t at speed v v v :
- Distance D 1 = u ⋅ t D_1 = u \cdot t D 1 = u ⋅ t , Distance D 2 = v ⋅ t D_2 = v \cdot t D 2 = v ⋅ t
- Total Distance = ( u + v ) t = (u + v)t = ( u + v ) t ; Total Time = 2 t = 2t = 2 t
Average Speed: V avg = ( u + v ) t 2 t = u + v 2 V_{\text{avg}} = \frac{(u + v)t}{2t} = \frac{u + v}{2} V avg = 2 t ( u + v ) t = 2 u + v +-----------------------------------------------------------------------------+
- | AVERAGE SPEED DECISION MATRIX |
- +-----------------------------------------------------------------------------+
- | ARE DISTANCES EQUAL? |
- | │ |
- | ├──> YES (Two Legs): V_avg = 2uv / (u + v) [Harmonic Mean] |
- | ├──> YES (Three Legs): V_avg = 3uvw / (uv + vw + wu) |
- | └──> NO: |
- | ARE TIMES EQUAL? |
- | │ |
- | ├──> YES: V_avg = (u + v) / 2 [Arithmetic Mean] |
- | └──> NO: V_avg = (Total Distance) / (Total Time) |
- +-----------------------------------------------------------------------------+
- Proportionality Concepts in Motion Dynamics
Proportionality can simplify fixed-distance, fixed-time and fixed-speed exercises. Identify which quantity is held constant before choosing a ratio.
1. Constant Distance ( D = constant D = \text{constant} D = constant ): Speed-Time Inversion
When distance is fixed, speed is inversely proportional to time: S ∝ 1 T ⟺ S 1 T 1 = S 2 T 2 ⟺ S 1 S 2 = T 2 T 1 S \propto \frac{1}{T} \iff S_1 T_1 = S_2 T_2 \iff \frac{S_1}{S_2} = \frac{T_2}{T_1} S ∝ T 1 ⟺ S 1 T 1 = S 2 T 2 ⟺ S 2 S 1 = T 1 T 2
If the ratio of speeds is a : b a : b a : b , the ratio of times taken is b : a b : a b : a .
The "Fraction of Usual Speed" Formula
A classic question type involves a train running at a fraction a b \frac{a}{b} b a of its usual speed and arriving late by t t t minutes:
Let usual speed = S 0 = S_0 = S 0 , usual time = T 0 = T_0 = T 0 .
New speed S ′ = a b S 0 S' = \frac{a}{b} S_0 S ′ = b a S 0 .
Since distance is constant, new time T ′ = b a T 0 T' = \frac{b}{a} T_0 T ′ = a b T 0 .
Delay Δ T = T ′ − T 0 = ( b a − 1 ) T 0 = ( b − a a ) T 0 \Delta T = T' - T_0 = \left(\frac{b}{a} - 1\right) T_0 = \left(\frac{b - a}{a}\right) T_0 Δ T = T ′ − T 0 = ( a b − 1 ) T 0 = ( a b − a ) T 0 .
Solving for the usual time T 0 T_0 T 0 : T 0 = a ∣ b − a ∣ × t T_0 = \frac{a}{|b - a|} \times t T 0 = ∣ b − a ∣ a × t
Note
If an express train runs at 3 4 \frac{3}{4} 4 3 of its normal booked speed and is 20 minutes late, here a = 3 , b = 4 , t = 20 a = 3, b = 4, t = 20 a = 3 , b = 4 , t = 20 . The usual scheduled time is immediately: T 0 = 3 4 − 3 × 20 = 60 minutes T_0 = \frac{3}{4 - 3} \times 20 = 60 \text{ minutes} T 0 = 4 − 3 3 × 20 = 60 minutes (1 hour).
2. Constant Time ( T = constant T = \text{constant} T = constant ): Distance-Speed Direct Proportion
When travel time is fixed, distance is directly proportional to speed: D ∝ S ⟺ D 1 D 2 = S 1 S 2 D \propto S \iff \frac{D_1}{D_2} = \frac{S_1}{S_2} D ∝ S ⟺ D 2 D 1 = S 2 S 1
If Train A travels at 80 km/h and Train B travels at 100 km/h for the same duration of 3 hours, their distance ratio is strictly 80 : 100 = 4 : 5 80 : 100 = 4 : 5 80 : 100 = 4 : 5 .
3. Constant Speed ( S = constant S = \text{constant} S = constant ): Distance-Time Direct Proportion
When speed is constant, distance is directly proportional to time: D ∝ T ⟺ D 1 D 2 = T 1 T 2 D \propto T \iff \frac{D_1}{D_2} = \frac{T_1}{T_2} D ∝ T ⟺ D 2 D 1 = T 2 T 1
Early and Late Arrival Dynamics
Another motion model involves a vehicle or train operating at two different speeds, resulting in differing arrival times relative to schedule.
Mathematical Formulation
Let the track distance between two points be D D D , and the scheduled on-time arrival duration be T 0 T_0 T 0 .
At speed S 1 S_1 S 1 , travel time T 1 = D S 1 T_1 = \frac{D}{S_1} T 1 = S 1 D .
At speed S 2 S_2 S 2 , travel time T 2 = D S 2 T_2 = \frac{D}{S_2} T 2 = S 2 D .
The difference between the two transit times is Δ T = ∣ T 1 − T 2 ∣ \Delta T = |T_1 - T_2| Δ T = ∣ T 1 − T 2 ∣ .
Expressing the time difference algebraically: Δ T = ∣ D S 1 − D S 2 ∣ = D ∣ S 2 − S 1 S 1 S 2 ∣ = D ∣ S 1 − S 2 ∣ S 1 S 2 \Delta T = \left|\frac{D}{S_1} - \frac{D}{S_2}\right| = D \left|\frac{S_2 - S_1}{S_1 S_2}\right| = D \frac{|S_1 - S_2|}{S_1 S_2} Δ T = S 1 D − S 2 D = D S 1 S 2 S 2 − S 1 = D S 1 S 2 ∣ S 1 − S 2 ∣
Solving directly for distance D D D : Distance ( D ) = S 1 ⋅ S 2 ∣ S 1 − S 2 ∣ × Δ T \text{Distance } (D) = \frac{S_1 \cdot S_2}{|S_1 - S_2|} \times \Delta T Distance ( D ) = ∣ S 1 − S 2 ∣ S 1 ⋅ S 2 × Δ T
Determining the Time Difference Δ T \Delta T Δ T
Carefully establish whether the departures/arrivals are early or late relative to the baseline schedule:
Condition at Speed S 1 S_1 S 1 Condition at Speed S 2 S_2 S 2 Net Time Difference Δ T \Delta T Δ T
Late by t 1 t_1 t 1 Late by t 2 t_2 t 2 Δ T = ∣ t 1 − t 2 ∣ \Delta T = \lvert t_1 - t_2 \rvert Δ T = ∣ t 1 − t 2 ∣
Early by t 1 t_1 t 1 Early by t 2 t_2 t 2 Δ T = ∣ t 1 − t 2 ∣ \Delta T = \lvert t_1 - t_2 \rvert Δ T = ∣ t 1 − t 2 ∣
- Late by t 1 t_1 t 1 Early by t 2 t_2 t 2 Δ T = t 1 + t 2 \Delta T = t_1 + t_2 Δ T = t 1 + t 2
- Early by t 1 t_1 t 1 Late by t 2 t_2 t 2 Δ T = t 1 + t 2 \Delta T = t_1 + t_2 Δ T = t 1 + t 2
Important
When using the formula D = S 1 S 2 ∣ S 1 − S 2 ∣ × Δ T D = \frac{S_1 S_2}{|S_1 - S_2|} \times \Delta T D = ∣ S 1 − S 2 ∣ S 1 S 2 × Δ T , if speeds S 1 S_1 S 1 and S 2 S_2 S 2 are in km/h \text{km/h} km/h , the time difference Δ T \Delta T Δ T MUST be converted into hours (i.e., divide minutes by 60).
Calculating Normal Booked Speed and Scheduled Time
Once distance D D D is computed:
Compute actual travel time at speed S 1 S_1 S 1 : T 1 = D S 1 T_1 = \frac{D}{S_1} T 1 = S 1 D .
Subtract the delay (or add the early margin) to find scheduled time: T 0 = T 1 − t 1 T_0 = T_1 - t_1 T 0 = T 1 − t 1 (if t 1 t_1 t 1 was late).
Find normal booked speed: S 0 = D T 0 S_0 = \frac{D}{T_0} S 0 = T 0 D .
- Worked Examples
- Worked Example 1: Multi-Leg Freight Rake Average Speed
Problem: A heavy-haul freight rake carrying iron ore traverses three consecutive block sections between a loading siding and a steel plant:
- Section 1: 120 km 120 \text{ km} 120 km at a booked speed of 40 km/h 40 \text{ km/h} 40 km/h
- Section 2: 180 km 180 \text{ km} 180 km at a booked speed of 60 km/h 60 \text{ km/h} 60 km/h
- Section 3: 100 km 100 \text{ km} 100 km at a booked speed of 50 km/h 50 \text{ km/h} 50 km/h
Determine: (a) the total transit time across the corridor, and (b) the overall average speed of the freight rake.
Step 1: Calculate transit time for each section: T 1 = D 1 S 1 = 120 km 40 km/h = 3.0 hours T_1 = \frac{D_1}{S_1} = \frac{120 \text{ km}}{40 \text{ km/h}} = 3.0 \text{ hours} T 1 = S 1 D 1 = 40 km/h 120 km = 3.0 hours T 2 = D 2 S 2 = 180 km 60 km/h = 3.0 hours T_2 = \frac{D_2}{S_2} = \frac{180 \text{ km}}{60 \text{ km/h}} = 3.0 \text{ hours} T 2 = S 2 D 2 = 60 km/h 180 km = 3.0 hours T 3 = D 3 S 3 = 100 km 50 km/h = 2.0 hours T_3 = \frac{D_3}{S_3} = \frac{100 \text{ km}}{50 \text{ km/h}} = 2.0 \text{ hours} T 3 = S 3 D 3 = 50 km/h 100 km = 2.0 hours
Step 2: Calculate total distance and total time: D total = 120 + 180 + 100 = 400 km D_{\text{total}} = 120 + 180 + 100 = 400 \text{ km} D total = 120 + 180 + 100 = 400 km T total = 3.0 + 3.0 + 2.0 = 8.0 hours T_{\text{total}} = 3.0 + 3.0 + 2.0 = 8.0 \text{ hours} T total = 3.0 + 3.0 + 2.0 = 8.0 hours
Step 3: Calculate overall average speed: V avg = D total T total = 400 km 8.0 hours = 50 km/h V_{\text{avg}} = \frac{D_{\text{total}}}{T_{\text{total}}} = \frac{400 \text{ km}}{8.0 \text{ hours}} = 50 \text{ km/h} V avg = T total D total = 8.0 hours 400 km = 50 km/h
Conclusion: Total transit time is 8.0 hours , and the overall average speed is 50 km/h .
Worked Example 2: Locomotive Traction Impairment (Proportionality)
Problem: Due to the failure of two traction motors, a WAP-7 electric locomotive is forced to haul an express rake at 5 8 \frac{5}{8} 8 5 of its normal sectional booked speed. Consequently, the train reaches the divisional interchange station 45 minutes 45 \text{ minutes} 45 minutes behind schedule. What is the normal scheduled journey time of this express train, and what was the actual travel duration under the defective traction condition?
Step 1: Identify given parameters: Speed fraction a b = 5 8 \frac{a}{b} = \frac{5}{8} b a = 8 5 (where a = 5 , b = 8 a = 5, b = 8 a = 5 , b = 8 ).
Delay Δ T = 45 minutes \Delta T = 45 \text{ minutes} Δ T = 45 minutes .
Step 2: Apply the inverse proportionality formula: T 0 = a ∣ b − a ∣ × Δ T T_0 = \frac{a}{|b - a|} \times \Delta T T 0 = ∣ b − a ∣ a × Δ T T 0 = 5 8 − 5 × 45 = 5 3 × 45 = 5 × 15 = 75 minutes T_0 = \frac{5}{8 - 5} \times 45 = \frac{5}{3} \times 45 = 5 \times 15 = 75 \text{ minutes} T 0 = 8 − 5 5 × 45 = 3 5 × 45 = 5 × 15 = 75 minutes
Step 3: Convert and calculate actual delayed duration: Normal scheduled time T 0 = 75 minutes = 1 hour 15 minutes T_0 = 75 \text{ minutes} = 1 \text{ hour } 15 \text{ minutes} T 0 = 75 minutes = 1 hour 15 minutes .
Actual delayed travel duration T ′ = T 0 + Δ T = 75 + 45 = 120 minutes = 2 hours T' = T_0 + \Delta T = 75 + 45 = 120 \text{ minutes} = 2 \text{ hours} T ′ = T 0 + Δ T = 75 + 45 = 120 minutes = 2 hours .
Step 4: Algebraic verification: Let normal speed be S S S . Distance D = S × 75 D = S \times 75 D = S × 75 .
Defective speed S ′ = 5 8 S S' = \frac{5}{8}S S ′ = 8 5 S . Actual time T ′ = D S ′ = S × 75 5 8 S = 75 × 8 5 = 120 minutes T' = \frac{D}{S'} = \frac{S \times 75}{\frac{5}{8}S} = 75 \times \frac{8}{5} = 120 \text{ minutes} T ′ = S ′ D = 8 5 S S × 75 = 75 × 5 8 = 120 minutes .
Delay = 120 − 75 = 45 minutes = 120 - 75 = 45 \text{ minutes} = 120 − 75 = 45 minutes . The result is verified.
Worked Example 3: Early and Late Differential Analysis
Problem: A railway divisional safety officer traveling by track inspection car between two control centers finds that if the inspection car operates at 45 km/h 45 \text{ km/h} 45 km/h , it arrives 16 minutes 16 \text{ minutes} 16 minutes late. If the inspection car operates at 60 km/h 60 \text{ km/h} 60 km/h , it arrives 4 minutes 4 \text{ minutes} 4 minutes early. Determine:
The exact rail distance between the two control centers.
The scheduled on-time journey duration.
The exact speed at which the car must operate to arrive precisely on time.
Step 1: Compute total time difference Δ T \Delta T Δ T : Condition 1: 16 minutes late ( + 16 +16 + 16 ).
Condition 2: 4 minutes early ( − 4 -4 − 4 ).
Since one condition is late and the other is early: Δ T = 16 + 4 = 20 minutes = 20 60 hours = 1 3 hour \Delta T = 16 + 4 = 20 \text{ minutes} = \frac{20}{60} \text{ hours} = \frac{1}{3} \text{ hour} Δ T = 16 + 4 = 20 minutes = 60 20 hours = 3 1 hour
Step 2: Calculate track distance D D D using the master formula: D = S 1 ⋅ S 2 ∣ S 1 − S 2 ∣ × Δ T D = \frac{S_1 \cdot S_2}{|S_1 - S_2|} \times \Delta T D = ∣ S 1 − S 2 ∣ S 1 ⋅ S 2 × Δ T D = 45 × 60 ∣ 45 − 60 ∣ × 1 3 = 2700 15 × 1 3 = 180 × 1 3 = 60 km D = \frac{45 \times 60}{|45 - 60|} \times \frac{1}{3} = \frac{2700}{15} \times \frac{1}{3} = 180 \times \frac{1}{3} = 60 \text{ km} D = ∣45 − 60∣ 45 × 60 × 3 1 = 15 2700 × 3 1 = 180 × 3 1 = 60 km
Step 3: Calculate the scheduled on-time journey duration T 0 T_0 T 0 : At speed S 1 = 45 km/h S_1 = 45 \text{ km/h} S 1 = 45 km/h , actual time taken: T 1 = 60 km 45 km/h = 4 3 hours = 80 minutes T_1 = \frac{60 \text{ km}}{45 \text{ km/h}} = \frac{4}{3} \text{ hours} = 80 \text{ minutes} T 1 = 45 km/h 60 km = 3 4 hours = 80 minutes
Since the car was 16 minutes late at this speed, the scheduled on-time duration is: T 0 = 80 − 16 = 64 minutes = 64 60 hours = 16 15 hours T_0 = 80 - 16 = 64 \text{ minutes} = \frac{64}{60} \text{ hours} = \frac{16}{15} \text{ hours} T 0 = 80 − 16 = 64 minutes = 60 64 hours = 15 16 hours
(Verification using S 2 = 60 km/h S_2 = 60 \text{ km/h} S 2 = 60 km/h : T 2 = 60 60 = 1 hour = 60 min T_2 = \frac{60}{60} = 1 \text{ hour} = 60 \text{ min} T 2 = 60 60 = 1 hour = 60 min . Arriving 4 min early means scheduled time was 60 + 4 = 64 min 60 + 4 = 64 \text{ min} 60 + 4 = 64 min . Confirmed!)
Step 4: Calculate the required on-time speed S 0 S_0 S 0 : S 0 = D T 0 = 60 km 16 15 hours = 60 × 15 16 = 900 16 = 56.25 km/h S_0 = \frac{D}{T_0} = \frac{60 \text{ km}}{\frac{16}{15} \text{ hours}} = 60 \times \frac{15}{16} = \frac{900}{16} = 56.25 \text{ km/h} S 0 = T 0 D = 15 16 hours 60 km = 60 × 16 15 = 16 900 = 56.25 km/h
Conclusion: Track distance is 60 km , scheduled duration is 64 minutes , and on-time speed is 56.25 km/h .
Exam Traps & Common Pitfalls
Trap Description Erroneous Approach Correct Mathematical Procedure
Arithmetic Averaging of Speeds Computing S 1 + S 2 2 \frac{S_1 + S_2}{2} 2 S 1 + S 2 when distances are equal Use the harmonic mean: V avg = 2 S 1 S 2 S 1 + S 2 V_{\text{avg}} = \frac{2S_1 S_2}{S_1 + S_2} V avg = S 1 + S 2 2 S 1 S 2 . Arithmetic mean is valid only when travel durations are equal.
Unit Conversion Inversion Multiplying by 18 5 \frac{18}{5} 5 18 when converting km/h \text{km/h} km/h to m/s \text{m/s} m/s km/h → m/s \text{km/h} \to \text{m/s} km/h → m/s requires × 5 18 \times \frac{5}{18} × 18 5 . Derive it from 1 km = 1000 m and 1 hour = 3600 s.
Early-Late Sign Confusion Subtracting times when one scenario is late and the other is early Late and early operate on opposite sides of scheduled zero: Δ T = t late + t early \Delta T = t_{\text{late}} + t_{\text{early}} Δ T = t late + t early . Subtract only if both are late or both early.
Dimensional Inconsistency in Δ T \Delta T Δ T Plugging Δ T \Delta T Δ T in minutes directly into D = S 1 S 2 Δ S Δ T D = \frac{S_1 S_2}{\Delta S} \Delta T D = Δ S S 1 S 2 Δ T Divide Δ T \Delta T Δ T in minutes by 60 to convert into hours when speeds are expressed in km/h \text{km/h} km/h .
Fraction of Speed Proportionality Inversion Assuming time taken is a b \frac{a}{b} b a of usual time when speed is a b \frac{a}{b} b a Speed and time are inversely proportional: if speed is a b S \frac{a}{b}S b a S , time taken is b a T \frac{b}{a}T a b T .