Study guide

5.2 Train Problems: Passing Poles, Platforms, Moving Objects & Relative Speed in Opposite/Same Directions

RRB Section Controller 2026: Free Written CBT Study Guide Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Exam Overview & Operational Profile

1.1 Written CBT Pattern, Scoring & Selection 1.2 Eligibility, Documents & A-2 Medical Requirements

2 Chapter 2: Number Systems & Arithmetic Foundations

2.1 Number Systems, Divisibility Rules, Prime Factorization & Remainder Theorem 2.2 Unit Digits, Cyclicity Rules & Power Modulo Calculations 2.3 HCF and LCM Properties, Prime Factorization & Practical Word Problems 2.4 Fractions, Decimals, Surds, Indices & BODMAS Simplification

3 Chapter 3: Commercial Arithmetic: Percentages, Profit & Rates

3.1 Percentages, Fractional Equivalents, Successive Variations & Population Formulas 3.2 Cost Price, Selling Price, Profit/Loss Percentage, Dishonest Dealer & Discount Schemes 3.3 Simple Interest, Compound Interest Formulas, Annual/Semi-Annual Compounding & Difference Traps

4 Chapter 4: Ratios, Proportions, Mixtures & Partnerships

4.1 Ratios, Duplicate/Sub-Duplicate Ratios, Direct and Inverse Variations & Proportional Sharing 4.2 Averages, Change in Average, Batsman/Bowling Averages & Replacement Problems 4.3 Rule of Alligation, Removal-Replacement Mixtures & Partnership Capital-Time Sharing

5 Chapter 5: Motion Dynamics, Time, Distance & Train Logistics

5.1 Time, Speed, Distance Relations, Average Speed & Unit Conversions 5.2 Train Problems: Passing Poles, Platforms, Moving Objects & Relative Speed in Opposite/Same Directions 5.3 Upstream, Downstream Boat Velocity, Still Water Speed & Circular Track Races

6 Chapter 6: Work Efficiency, Pipes & Operational Scheduling

6.1 Individual and Group Work, Efficiency Ratios, Work Equivalences & Mandays Formula 6.2 Alternate Day Working, Negative Work & Wage Distribution Based on Work Done 6.3 Inlet and Outlet Pipes, Net Filling Rate, Alternating Flow & Tank Leakage Problems

7 Chapter 7: Algebra, Linear Equations & Progressions

7.1 Algebraic Identities, Polynomial Factorization & Systems of Linear Equations in Two Variables 7.2 Quadratic Equations, Nature of Roots, Discriminant Analysis & Maximum/Minimum Values 7.3 Arithmetic Progressions (AP), General Term, Sum of n Terms & Sequence Modeling

8 Chapter 8: Mensuration: 2D Areas & 3D Solids

8.1 Lines, Angles, Triangle Theorems, Congruence/Similarity & Circle Tangent Properties 8.2 Perimeter and Area of Quadrilaterals, Polygons, Circles & Shaded Region Problems 8.3 Surface Area and Volume of Cubes, Cuboids, Cylinders, Cones, Spheres & Melting-Recasting Solids

9 Chapter 9: Statistics, Probability & Data Interpretation

9.1 Mean, Median, Mode, Range, Mean Deviation & Standard Deviation 9.2 Permutations, Combinations, Classical Probability, Independent Events & Odds 9.3 Tabular Data Interpretation, Bar Charts, Grouped Graphs & Percentage Calculation Shortcuts 9.4 Pie Charts (Angle vs Percentage), Line Trend Graphs & Quantitative Data Sufficiency

10 Chapter 10: Multi-Source & Graphical Analysis

10.1 Multi-Source Analysis, Set Data & Arrangement 10.2 Scatter Plots, Histograms & Distribution Curves

11 Chapter 11: Deductive Logic, Statements & Binary Puzzles

11.1 Syllogisms, Sets & Possibility Conclusions 11.2 Critical Reasoning: Implicit Assumptions, Strong vs Weak Arguments & Course of Action 11.3 Binary Logic: Truth-Tellers, Liars, Alternators & Matrix Logic Deductions

12 Chapter 12: Relational, Directional, Clock & Calendar Reasoning

12.1 Direct Family Relations, Coded Blood Relations & Family Tree Tree-Mapping Methods 12.2 Cardinal & Ordinal Directions, Multi-Step Turn Paths, Pythagorean Distance & Shadow Timing 12.3 Clock Hands Angular Speed, Angle Between Hands at Given Time, Coincidence & Faulty Clocks 12.4 Odd Days Concept, Reference Date Calculations, Leap Year Rules & Repeating Calendar Years

13 Chapter 13: English Reading Comprehension

13.1 English Comprehension: Main Idea, Support & Inference 13.2 English Comprehension: Application, Structure & Style

14 Chapter 14: Mental Reasoning: Analogies & Series

14.1 Semantic, Letter & Number Analogies 14.2 Number Series: Differences, Powers & Missing Terms 14.3 Interleaved, Recursive & Wrong-Term Series

15 Chapter 15: Mental Reasoning: Coding & Ranking

15.1 Letter Shifts, Reversal & Numerical Codes 15.2 Message Intersections & Conditional Coding Tables 15.3 Ranking, People Between & Position Interchanges

16 Chapter 16: Mental Reasoning: Seating Arrangements

16.1 Linear Seating & Parallel Rows 16.2 Circular Seating, Facing & Rotational Symmetry

5.2 Train Problems: Passing Poles, Platforms, Moving Objects & Relative Speed in Opposite/Same Directions

Key Takeaways Explain This Topic AI

Traversing a stationary point object (signal pole, OHE mast, kilometer post, trackman) requires covering an effective distance equal solely to the train's physical length ( D = L train D = L_{\text{train}} D = L train ​ ).

Traversing an extended structure (station platform, bridge span, tunnel, stabled rake) requires covering the combined sum of lengths ( D = L train + L structure D = L_{\text{train}} + L_{\text{structure}} D = L train ​ + L structure ​ ).

Relative speed between two moving entities equals ( S 1 + S 2 ) (S_1 + S_2) ( S 1 ​ + S 2 ​ ) when traveling in opposite directions and ∣ S 1 − S 2 ∣ |S_1 - S_2| ∣ S 1 ​ − S 2 ​ ∣ when traveling in identical directions.

When two moving trains cross each other, total distance traversed is ( L 1 + L 2 ) (L_1 + L_2) ( L 1 ​ + L 2 ​ ) ; however, if determining the time taken to pass an observer seated inside one train, the effective distance is exclusively the length of the opposing train ( L passing L_{\text{passing}} L passing ​ ).

If two trains depart simultaneously from stations A and B towards each other, cross at an intermediate point, and subsequently reach their opposite destinations in times T 1 T_1 T 1 ​ and T 2 T_2 T 2 ​ , their speed ratio follows S 1 S 2 = T 2 T 1 \frac{S_1}{S_2} = \sqrt{\frac{T_2}{T_1}} S 2 ​ S 1 ​ ​ = T 1 ​ T 2 ​ ​ ​ , with elapsed crossing time t = T 1 T 2 t = \sqrt{T_1 T_2} t = T 1 ​ T 2 ​ ​ .

Last updated: October 2026

Fundamental Crossing Postulates & Effective Length

A train cannot be treated as a point mass when its physical length is significant relative to the obstacle being cleared. The fundamental kinematic equation T = D / S T = D / S T = D / S governs all cases, but the effective distance D D D depends strictly on the physical nature of the object. CASE 1: TRAIN PASSING A POINT OBJECT (Pole / Person)

  • [ Train: Length L_t, Speed S_t ] ──► │ (Signal Pole)
  • Effective Distance = L_t
  • Time = L_t / S_t
  • CASE 2: TRAIN PASSING AN EXTENDED OBJECT (Platform / Bridge)
  • [ Train: Length L_t, Speed S_t ] ──► [ Platform: Length L_p ]
  • Effective Distance = L_t + L_p
  • Time = (L_t + L_p) / S_t
  • 1. Crossing Stationary Point Objects

Point objects have negligible dimension along the track axis:

Telegraph poles, Overhead Equipment (OHE) masts, signal posts, kilometer stones

A standing passenger, trackman (gangman), or station master on the platform Effective Distance ( D ) = L train \text{Effective Distance } (D) = L_{\text{train}} Effective Distance ( D ) = L train ​ Crossing Time ( t ) = L train S train \text{Crossing Time } (t) = \frac{L_{\text{train}}}{S_{\text{train}}} Crossing Time ( t ) = S train ​ L train ​ ​

2. Crossing Stationary Extended Structures

Extended structures have significant physical dimension along the track axis:

  • Station platforms, passenger shelters
  • Girder bridges, viaducts, rail culverts
  • Tunnels, cutting walls

A stationary freight consist or stabled rake on an adjacent loop line Effective Distance ( D ) = L train + L structure \text{Effective Distance } (D) = L_{\text{train}} + L_{\text{structure}} Effective Distance ( D ) = L train ​ + L structure ​ Crossing Time ( t ) = L train + L structure S train \text{Crossing Time } (t) = \frac{L_{\text{train}} + L_{\text{structure}}}{S_{\text{train}}} Crossing Time ( t ) = S train ​ L train ​ + L structure ​ ​

3. Dual-Condition Traversal Problems

A frequent examination question presents a train passing two different extended objects (or a point object and an extended object) in differing times:

Condition 1: Train passes platform of length P 1 P_1 P 1 ​ in time t 1 t_1 t 1 ​ : L train + P 1 = S train × t 1 L_{\text{train}} + P_1 = S_{\text{train}} \times t_1 L train ​ + P 1 ​ = S train ​ × t 1 ​

Condition 2: Train passes platform of length P 2 P_2 P 2 ​ in time t 2 t_2 t 2 ​ : L train + P 2 = S train × t 2 L_{\text{train}} + P_2 = S_{\text{train}} \times t_2 L train ​ + P 2 ​ = S train ​ × t 2 ​

Subtracting Condition 1 from Condition 2 eliminates L train L_{\text{train}} L train ​ : P 2 − P 1 = S train ( t 2 − t 1 ) ⟹ S train = P 2 − P 1 t 2 − t 1 P_2 - P_1 = S_{\text{train}} (t_2 - t_1) \implies S_{\text{train}} = \frac{P_2 - P_1}{t_2 - t_1} P 2 ​ − P 1 ​ = S train ​ ( t 2 ​ − t 1 ​ ) ⟹ S train ​ = t 2 ​ − t 1 ​ P 2 ​ − P 1 ​ ​

Once S train S_{\text{train}} S train ​ is found, substitute back into either equation to determine L train L_{\text{train}} L train ​ .

Relative Speed Mechanics

Relative speed is the rate at which the distance between two moving bodies changes. The sign of the relative velocity vector depends on their relative heading.

Relative Direction Relative Speed ( S rel S_{\text{rel}} S rel ​ ) Physical Interpretation

Opposite Directions (Approaching or Moving Apart) S rel = S 1 + S 2 S_{\text{rel}} = S_1 + S_2 S rel ​ = S 1 ​ + S 2 ​ Speeds combine; separation distance closes or widens rapidly

Same Direction (Overtaking or Trailing) S rel = ∣ S 1 − S 2 ∣ S_{\text{rel}} = \lvert S_1 - S_2 \rvert S rel ​ = ∣ S 1 ​ − S 2 ​ ∣ Differential speed; separation changes slowly

Two Moving Trains Crossing Each Other

When two trains of lengths L 1 L_1 L 1 ​ and L 2 L_2 L 2 ​ with speeds S 1 S_1 S 1 ​ and S 2 S_2 S 2 ​ traverse each other:

Total physical distance required to clear each other from the leading ends coming abreast until the trailing ends clear is always: D total = L 1 + L 2 D_{\text{total}} = L_1 + L_2 D total ​ = L 1 ​ + L 2 ​

Approaching on Parallel Tracks (Opposite Directions): t crossing = L 1 + L 2 S 1 + S 2 t_{\text{crossing}} = \frac{L_1 + L_2}{S_1 + S_2} t crossing ​ = S 1 ​ + S 2 ​ L 1 ​ + L 2 ​ ​

Overtaking on Parallel Tracks (Same Direction, where S 1 > S 2 S_1 > S_2 S 1 ​ > S 2 ​ ): t overtake = L 1 + L 2 S 1 − S 2 t_{\text{overtake}} = \frac{L_1 + L_2}{S_1 - S_2} t overtake ​ = S 1 ​ − S 2 ​ L 1 ​ + L 2 ​ ​

Train Crossing a Moving Person or Vehicle

When a train of length L t L_t L t ​ and speed S t S_t S t ​ passes a pedestrian or trackman moving at speed S p S_p S p ​ :

The person is a point object: D = L t D = L_t D = L t ​ .

If the person moves in the same direction as the train: t = L t S t − S p t = \frac{L_t}{S_t - S_p} t = S t ​ − S p ​ L t ​ ​

If the person moves in the opposite direction to the train: t = L t S t + S p t = \frac{L_t}{S_t + S_p} t = S t ​ + S p ​ L t ​ ​

Observer Seated Inside a Moving Train

Important

When an exam problem asks for the time taken for a train to pass a passenger seated in another train , candidates frequently make the catastrophic mistake of using D = L 1 + L 2 D = L_1 + L_2 D = L 1 ​ + L 2 ​ .

A seated passenger is a point object ! The distance traversed is purely the length of the train that is passing the observer ( L passing L_{\text{passing}} L passing ​ ). The speed of the passenger is simply the speed of the train he is riding in. t = L passing S 1 ± S 2 t = \frac{L_{\text{passing}}}{S_1 \pm S_2} t = S 1 ​ ± S 2 ​ L passing ​ ​

Simultaneous Departure, Crossing & Post-Meeting Transit Formula

The following constant-speed model concerns two trains starting simultaneously from opposite terminals towards each other. Station A ───► Train 1 (Speed S_1) Train 2 (Speed S_2) ◄─── Station B

  • Meeting Point P
  • │
  • ◄─── Train 2 takes T_2 ──┼── Train 1 takes T_1 ───►
  • The Theorem Formulation

Two trains T 1 T_1 T 1 ​ and T 2 T_2 T 2 ​ depart at the same instant from stations A and B towards each other. They meet at point P after an elapsed time t t t .

After crossing each other at P, Train 1 takes T 1 T_1 T 1 ​ hours to reach Station B, and Train 2 takes T 2 T_2 T 2 ​ hours to reach Station A.

Complete Mathematical Proof

Before Meeting (Time t t t elapsed for both trains):

  • Train 1 covers distance A P AP A P : A P = S 1 ⋅ t AP = S_1 \cdot t A P = S 1 ​ ⋅ t
  • Train 2 covers distance B P BP BP : B P = S 2 ⋅ t BP = S_2 \cdot t BP = S 2 ​ ⋅ t

After Meeting:

Train 1 covers remaining distance P B PB PB in time T 1 T_1 T 1 ​ : P B = S 1 ⋅ T 1 PB = S_1 \cdot T_1 PB = S 1 ​ ⋅ T 1 ​

Train 2 covers remaining distance P A PA P A in time T 2 T_2 T 2 ​ : P A = S 2 ⋅ T 2 PA = S_2 \cdot T_2 P A = S 2 ​ ⋅ T 2 ​

Equating Segment Lengths:

Distance A P AP A P : S 1 ⋅ t = S 2 ⋅ T 2 ⟹ t = S 2 T 2 S 1 S_1 \cdot t = S_2 \cdot T_2 \implies t = \frac{S_2 T_2}{S_1} S 1 ​ ⋅ t = S 2 ​ ⋅ T 2 ​ ⟹ t = S 1 ​ S 2 ​ T 2 ​ ​

Distance B P BP BP : S 2 ⋅ t = S 1 ⋅ T 1 ⟹ t = S 1 T 1 S 2 S_2 \cdot t = S_1 \cdot T_1 \implies t = \frac{S_1 T_1}{S_2} S 2 ​ ⋅ t = S 1 ​ ⋅ T 1 ​ ⟹ t = S 2 ​ S 1 ​ T 1 ​ ​

Equating the two expressions for meeting time t t t : S 2 T 2 S 1 = S 1 T 1 S 2 ⟹ S 1 2 S 2 2 = T 2 T 1 \frac{S_2 T_2}{S_1} = \frac{S_1 T_1}{S_2} \implies \frac{S_1^2}{S_2^2} = \frac{T_2}{T_1} S 1 ​ S 2 ​ T 2 ​ ​ = S 2 ​ S 1 ​ T 1 ​ ​ ⟹ S 2 2 ​ S 1 2 ​ ​ = T 1 ​ T 2 ​ ​

Taking the square root on both sides yields the canonical formula: S 1 S 2 = T 2 T 1 \frac{S_1}{S_2} = \sqrt{\frac{T_2}{T_1}} S 2 ​ S 1 ​ ​ = T 1 ​ T 2 ​ ​ ​

Corollaries: Meeting Time and Total Track Distance

Elapsed Time until Meeting ( t t t ): Multiplying the two expressions for t t t : t 2 = ( S 2 T 2 S 1 ) ( S 1 T 1 S 2 ) = T 1 T 2 ⟹ t = T 1 T 2 t^2 = \left(\frac{S_2 T_2}{S_1}\right) \left(\frac{S_1 T_1}{S_2}\right) = T_1 T_2 \implies t = \sqrt{T_1 T_2} t 2 = ( S 1 ​ S 2 ​ T 2 ​ ​ ) ( S 2 ​ S 1 ​ T 1 ​ ​ ) = T 1 ​ T 2 ​ ⟹ t = T 1 ​ T 2 ​ ​

The time elapsed until the trains meet is the geometric mean of their post-crossing transit times!

Total Distance Between Terminals ( D D D ): D = A P + P B = S 1 t + S 1 T 1 = S 1 ( t + T 1 ) = S 1 ( T 1 T 2 + T 1 ) D = AP + PB = S_1 t + S_1 T_1 = S_1 (t + T_1) = S_1 (\sqrt{T_1 T_2} + T_1) D = A P + PB = S 1 ​ t + S 1 ​ T 1 ​ = S 1 ​ ( t + T 1 ​ ) = S 1 ​ ( T 1 ​ T 2 ​ ​ + T 1 ​ )

  • Worked Examples
  • Worked Example 1: Traversal of Point and Extended Structures

Problem: An express train traveling at a constant speed passes an OHE electrification mast in 15 seconds 15 \text{ seconds} 15 seconds and completely crosses a 360 -meter 360\text{-meter} 360 -meter long girder bridge in 33 seconds 33 \text{ seconds} 33 seconds . Determine:

The operational speed of the train in kilometers per hour ( km/h \text{km/h} km/h ).

The physical length of the express train in meters.

Step 1: Set up the kinematic traversal equations: Let train length be L L L (in meters) and speed be S S S (in m/s \text{m/s} m/s ).

  • Crossing the mast (point object): L = S × 15 L = S \times 15 L = S × 15
  • Crossing the bridge (extended object): L + 360 = S × 33 L + 360 = S \times 33 L + 360 = S × 33

Step 2: Solve for speed S S S : Substitute L = 15 S L = 15S L = 15 S into the bridge equation: 15 S + 360 = 33 S ⟹ 18 S = 360 ⟹ S = 360 18 = 20 m/s 15S + 360 = 33S \implies 18S = 360 \implies S = \frac{360}{18} = 20 \text{ m/s} 15 S + 360 = 33 S ⟹ 18 S = 360 ⟹ S = 18 360 ​ = 20 m/s

Step 3: Convert speed to km/h \text{km/h} km/h : S = 20 × 18 5 = 4 × 18 = 72 km/h S = 20 \times \frac{18}{5} = 4 \times 18 = 72 \text{ km/h} S = 20 × 5 18 ​ = 4 × 18 = 72 km/h

Step 4: Calculate train length L L L : L = 15 × S = 15 × 20 = 300 meters L = 15 \times S = 15 \times 20 = 300 \text{ meters} L = 15 × S = 15 × 20 = 300 meters

Conclusion: The speed of the train is 72 km/h , and its length is 300 meters .

Worked Example 2: Parallel Track Overtaking and Opposite Crossing

Problem: Two passenger trains of lengths 280 meters 280 \text{ meters} 280 meters and 220 meters 220 \text{ meters} 220 meters operate on parallel broad-gauge tracks. When moving in the same direction, the faster train completely overtakes the slower train in 60 seconds 60 \text{ seconds} 60 seconds . When moving in opposite directions, they completely pass each other in 12 seconds 12 \text{ seconds} 12 seconds . Calculate the individual speeds of both trains in km/h \text{km/h} km/h .

Step 1: Determine total distance for clearance: D total = L 1 + L 2 = 280 + 220 = 500 meters D_{\text{total}} = L_1 + L_2 = 280 + 220 = 500 \text{ meters} D total ​ = L 1 ​ + L 2 ​ = 280 + 220 = 500 meters

Step 2: Formulate relative speed equations: Let the speeds of the trains be S 1 S_1 S 1 ​ and S 2 S_2 S 2 ​ in m/s \text{m/s} m/s (with S 1 > S 2 S_1 > S_2 S 1 ​ > S 2 ​ ).

In the same direction (overtaking): S 1 − S 2 = D total t overtake = 500 m 60 s = 25 3 m/s — (Equation 1) S_1 - S_2 = \frac{D_{\text{total}}}{t_{\text{overtake}}} = \frac{500 \text{ m}}{60 \text{ s}} = \frac{25}{3} \text{ m/s} \quad \text{--- (Equation 1)} S 1 ​ − S 2 ​ = t overtake ​ D total ​ ​ = 60 s 500 m ​ = 3 25 ​ m/s — (Equation 1)

In opposite directions (crossing): S 1 + S 2 = D total t crossing = 500 m 12 s = 125 3 m/s — (Equation 2) S_1 + S_2 = \frac{D_{\text{total}}}{t_{\text{crossing}}} = \frac{500 \text{ m}}{12 \text{ s}} = \frac{125}{3} \text{ m/s} \quad \text{--- (Equation 2)} S 1 ​ + S 2 ​ = t crossing ​ D total ​ ​ = 12 s 500 m ​ = 3 125 ​ m/s — (Equation 2)

Step 3: Solve the simultaneous linear system: Add Equation 1 and Equation 2: 2 S 1 = 25 3 + 125 3 = 150 3 = 50 ⟹ S 1 = 25 m/s 2S_1 = \frac{25}{3} + \frac{125}{3} = \frac{150}{3} = 50 \implies S_1 = 25 \text{ m/s} 2 S 1 ​ = 3 25 ​ + 3 125 ​ = 3 150 ​ = 50 ⟹ S 1 ​ = 25 m/s

Substitute S 1 = 25 S_1 = 25 S 1 ​ = 25 into Equation 2: S 2 = 125 3 − 25 = 125 − 75 3 = 50 3 m/s S_2 = \frac{125}{3} - 25 = \frac{125 - 75}{3} = \frac{50}{3} \text{ m/s} S 2 ​ = 3 125 ​ − 25 = 3 125 − 75 ​ = 3 50 ​ m/s

Step 4: Convert both speeds to km/h \text{km/h} km/h : S 1 = 25 × 18 5 = 5 × 18 = 90 km/h S_1 = 25 \times \frac{18}{5} = 5 \times 18 = 90 \text{ km/h} S 1 ​ = 25 × 5 18 ​ = 5 × 18 = 90 km/h S 2 = 50 3 × 18 5 = 10 × 6 = 60 km/h S_2 = \frac{50}{3} \times \frac{18}{5} = 10 \times 6 = 60 \text{ km/h} S 2 ​ = 3 50 ​ × 5 18 ​ = 10 × 6 = 60 km/h

Conclusion: The speed of the faster train is 90 km/h , and the slower train is 60 km/h .

Worked Example 3: Post-Meeting Transit Formula Application

Problem: Two superfast express trains, Train A and Train B, depart simultaneously from fictional stations X and Y towards each other. After crossing each other at an en-route junction station, they take 4 hours 48 minutes 4 \text{ hours } 48 \text{ minutes} 4 hours 48 minutes and 3 hours 20 minutes 3 \text{ hours } 20 \text{ minutes} 3 hours 20 minutes respectively to reach their destination terminals. If Train A is traveling at a booked speed of 75 km/h 75 \text{ km/h} 75 km/h , determine:

The speed of Train B.

The elapsed time from departure until the two trains crossed.

The total rail distance between fictional stations X and Y.

Step 1: Convert post-meeting times to improper fractions of hours:

T 1 T_1 T 1 ​ (Train A) = 4 hours 48 minutes = 4 + 48 60 = 4 + 4 5 = 24 5 hours = 4 \text{ hours } 48 \text{ minutes} = 4 + \frac{48}{60} = 4 + \frac{4}{5} = \frac{24}{5} \text{ hours} = 4 hours 48 minutes = 4 + 60 48 ​ = 4 + 5 4 ​ = 5 24 ​ hours

T 2 T_2 T 2 ​ (Train B) = 3 hours 20 minutes = 3 + 20 60 = 3 + 1 3 = 10 3 hours = 3 \text{ hours } 20 \text{ minutes} = 3 + \frac{20}{60} = 3 + \frac{1}{3} = \frac{10}{3} \text{ hours} = 3 hours 20 minutes = 3 + 60 20 ​ = 3 + 3 1 ​ = 3 10 ​ hours

Step 2: Apply the post-meeting speed ratio formula: S 1 S 2 = T 2 T 1 = 10 / 3 24 / 5 = 10 3 × 5 24 = 50 72 = 25 36 = 5 6 \frac{S_1}{S_2} = \sqrt{\frac{T_2}{T_1}} = \sqrt{\frac{10/3}{24/5}} = \sqrt{\frac{10}{3} \times \frac{5}{24}} = \sqrt{\frac{50}{72}} = \sqrt{\frac{25}{36}} = \frac{5}{6} S 2 ​ S 1 ​ ​ = T 1 ​ T 2 ​ ​ ​ = 24/5 10/3 ​ ​ = 3 10 ​ × 24 5 ​ ​ = 72 50 ​ ​ = 36 25 ​ ​ = 6 5 ​

Step 3: Calculate the speed of Train B ( S 2 S_2 S 2 ​ ): 75 S 2 = 5 6 ⟹ S 2 = 75 × 6 5 = 15 × 6 = 90 km/h \frac{75}{S_2} = \frac{5}{6} \implies S_2 = 75 \times \frac{6}{5} = 15 \times 6 = 90 \text{ km/h} S 2 ​ 75 ​ = 6 5 ​ ⟹ S 2 ​ = 75 × 5 6 ​ = 15 × 6 = 90 km/h

Step 4: Calculate the elapsed time until meeting ( t t t ): t = T 1 T 2 = 24 5 × 10 3 = 8 × 2 = 16 = 4 hours t = \sqrt{T_1 T_2} = \sqrt{\frac{24}{5} \times \frac{10}{3}} = \sqrt{8 \times 2} = \sqrt{16} = 4 \text{ hours} t = T 1 ​ T 2 ​ ​ = 5 24 ​ × 3 10 ​ ​ = 8 × 2 ​ = 16 ​ = 4 hours

Step 5: Calculate total rail distance ( D D D ): D = S 1 ( t + T 1 ) = 75 ( 4 + 24 5 ) = 75 × 44 5 = 15 × 44 = 660 km D = S_1(t + T_1) = 75 \left(4 + \frac{24}{5}\right) = 75 \times \frac{44}{5} = 15 \times 44 = 660 \text{ km} D = S 1 ​ ( t + T 1 ​ ) = 75 ( 4 + 5 24 ​ ) = 75 × 5 44 ​ = 15 × 44 = 660 km

(Verification using S 2 S_2 S 2 ​ : D = S 2 ( t + T 2 ) = 90 ( 4 + 10 3 ) = 90 × 22 3 = 30 × 22 = 660 km D = S_2(t + T_2) = 90 \left(4 + \frac{10}{3}\right) = 90 \times \frac{22}{3} = 30 \times 22 = 660 \text{ km} D = S 2 ​ ( t + T 2 ​ ) = 90 ( 4 + 3 10 ​ ) = 90 × 3 22 ​ = 30 × 22 = 660 km . Exactly matches!)

Conclusion: Train B speed is 90 km/h , elapsed meeting time is 4 hours , and total distance is 660 km .

Exam Traps & Common Pitfalls

Trap Description Erroneous Approach Correct Mathematical Procedure

Seated Passenger Distance Fallacy Using L 1 + L 2 L_1 + L_2 L 1 ​ + L 2 ​ to find time to pass a passenger in another train A passenger is a point object. Distance is ONLY the length of the passing train ( L passing L_{\text{passing}} L passing ​ ).

Forgetting Platform Length Setting D = L train D = L_{\text{train}} D = L train ​ when passing a platform or tunnel An extended structure has length: D = L train + L structure D = L_{\text{train}} + L_{\text{structure}} D = L train ​ + L structure ​ .

Inverting the Post-Crossing Ratio Writing S 1 S 2 = T 1 T 2 \frac{S_1}{S_2} = \sqrt{\frac{T_1}{T_2}} S 2 ​ S 1 ​ ​ = T 2 ​ T 1 ​ ​ ​ The ratio is inversely proportional to time square roots: S 1 S 2 = T 2 T 1 \frac{S_1}{S_2} = \sqrt{\frac{T_2}{T_1}} S 2 ​ S 1 ​ ​ = T 1 ​ T 2 ​ ​ ​ .

Mixing Distance and Speed Units Adding km/h \text{km/h} km/h directly to meters or seconds Always convert speeds to m/s \text{m/s} m/s using × 5 18 \times \frac{5}{18} × 18 5 ​ before applying distances in meters.

Non-Simultaneous Departure Trap Applying relative speed immediately when trains start at different times Advance the earlier train by its head-start distance first; apply relative speed only after both trains are moving.