Study guide

10.1 Multi-Source Analysis, Set Data & Arrangement

RRB Section Controller 2026: Free Written CBT Study Guide Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Exam Overview & Operational Profile

1.1 Written CBT Pattern, Scoring & Selection 1.2 Eligibility, Documents & A-2 Medical Requirements

2 Chapter 2: Number Systems & Arithmetic Foundations

2.1 Number Systems, Divisibility Rules, Prime Factorization & Remainder Theorem 2.2 Unit Digits, Cyclicity Rules & Power Modulo Calculations 2.3 HCF and LCM Properties, Prime Factorization & Practical Word Problems 2.4 Fractions, Decimals, Surds, Indices & BODMAS Simplification

3 Chapter 3: Commercial Arithmetic: Percentages, Profit & Rates

3.1 Percentages, Fractional Equivalents, Successive Variations & Population Formulas 3.2 Cost Price, Selling Price, Profit/Loss Percentage, Dishonest Dealer & Discount Schemes 3.3 Simple Interest, Compound Interest Formulas, Annual/Semi-Annual Compounding & Difference Traps

4 Chapter 4: Ratios, Proportions, Mixtures & Partnerships

4.1 Ratios, Duplicate/Sub-Duplicate Ratios, Direct and Inverse Variations & Proportional Sharing 4.2 Averages, Change in Average, Batsman/Bowling Averages & Replacement Problems 4.3 Rule of Alligation, Removal-Replacement Mixtures & Partnership Capital-Time Sharing

5 Chapter 5: Motion Dynamics, Time, Distance & Train Logistics

5.1 Time, Speed, Distance Relations, Average Speed & Unit Conversions 5.2 Train Problems: Passing Poles, Platforms, Moving Objects & Relative Speed in Opposite/Same Directions 5.3 Upstream, Downstream Boat Velocity, Still Water Speed & Circular Track Races

6 Chapter 6: Work Efficiency, Pipes & Operational Scheduling

6.1 Individual and Group Work, Efficiency Ratios, Work Equivalences & Mandays Formula 6.2 Alternate Day Working, Negative Work & Wage Distribution Based on Work Done 6.3 Inlet and Outlet Pipes, Net Filling Rate, Alternating Flow & Tank Leakage Problems

7 Chapter 7: Algebra, Linear Equations & Progressions

7.1 Algebraic Identities, Polynomial Factorization & Systems of Linear Equations in Two Variables 7.2 Quadratic Equations, Nature of Roots, Discriminant Analysis & Maximum/Minimum Values 7.3 Arithmetic Progressions (AP), General Term, Sum of n Terms & Sequence Modeling

8 Chapter 8: Mensuration: 2D Areas & 3D Solids

8.1 Lines, Angles, Triangle Theorems, Congruence/Similarity & Circle Tangent Properties 8.2 Perimeter and Area of Quadrilaterals, Polygons, Circles & Shaded Region Problems 8.3 Surface Area and Volume of Cubes, Cuboids, Cylinders, Cones, Spheres & Melting-Recasting Solids

9 Chapter 9: Statistics, Probability & Data Interpretation

9.1 Mean, Median, Mode, Range, Mean Deviation & Standard Deviation 9.2 Permutations, Combinations, Classical Probability, Independent Events & Odds 9.3 Tabular Data Interpretation, Bar Charts, Grouped Graphs & Percentage Calculation Shortcuts 9.4 Pie Charts (Angle vs Percentage), Line Trend Graphs & Quantitative Data Sufficiency

10 Chapter 10: Multi-Source & Graphical Analysis

10.1 Multi-Source Analysis, Set Data & Arrangement 10.2 Scatter Plots, Histograms & Distribution Curves

11 Chapter 11: Deductive Logic, Statements & Binary Puzzles

11.1 Syllogisms, Sets & Possibility Conclusions 11.2 Critical Reasoning: Implicit Assumptions, Strong vs Weak Arguments & Course of Action 11.3 Binary Logic: Truth-Tellers, Liars, Alternators & Matrix Logic Deductions

12 Chapter 12: Relational, Directional, Clock & Calendar Reasoning

12.1 Direct Family Relations, Coded Blood Relations & Family Tree Tree-Mapping Methods 12.2 Cardinal & Ordinal Directions, Multi-Step Turn Paths, Pythagorean Distance & Shadow Timing 12.3 Clock Hands Angular Speed, Angle Between Hands at Given Time, Coincidence & Faulty Clocks 12.4 Odd Days Concept, Reference Date Calculations, Leap Year Rules & Repeating Calendar Years

13 Chapter 13: English Reading Comprehension

13.1 English Comprehension: Main Idea, Support & Inference 13.2 English Comprehension: Application, Structure & Style

14 Chapter 14: Mental Reasoning: Analogies & Series

14.1 Semantic, Letter & Number Analogies 14.2 Number Series: Differences, Powers & Missing Terms 14.3 Interleaved, Recursive & Wrong-Term Series

15 Chapter 15: Mental Reasoning: Coding & Ranking

15.1 Letter Shifts, Reversal & Numerical Codes 15.2 Message Intersections & Conditional Coding Tables 15.3 Ranking, People Between & Position Interchanges

16 Chapter 16: Mental Reasoning: Seating Arrangements

16.1 Linear Seating & Parallel Rows 16.2 Circular Seating, Facing & Rotational Symmetry

10.1 Multi-Source Analysis, Set Data & Arrangement

Key Takeaways Explain This Topic AI

Before combining sources, match entity, unit, time period and category definitions.

In the shipment example, 225 shipments carry 2340 tonnes, averaging 10.4 tonnes per shipment.

At least one is a union; exactly one excludes overlap.

A single arrangement satisfying the clues is not evidence that it is unique.

Last updated: October 2026

Combine sources before calculating

Multi-source data analysis means answering a question using information distributed across a passage, table or graphic. The difficult step is often deciding which figures describe the same population. Adding unrelated totals quickly produces a precise but meaningless answer. Before any arithmetic, identify the entity, unit, time period, category definition and relationship between the sources.

For the written CBT, practise translating each source into a small common working table. Read chart labels as carefully as numerical values. “Trips,” “passengers,” “tonnes” and “tonne-kilometers” measure different quantities. Similarly, a quarterly total cannot be compared directly with one month's total without an explicit conversion or additional information. A statement that one quantity rose does not establish why it rose.

Worked example: passage plus table

The following dataset is fictional. A depot handles two classes of shipments. A passage states that each Class A shipment carries 12 tonnes and each Class B shipment carries 8 tonnes. All recorded shipments are completed, and no shipment appears in both classes.

  • Month Class A shipments Class B shipments
  • January 40 30
  • February 50 25
  • March 45 35

January's shipment count is 40 + 30 = 70 40+30=70 40 + 30 = 70 , while its tonnage is 40 ( 12 ) + 30 ( 8 ) = 720 40(12)+30(8)=720 40 ( 12 ) + 30 ( 8 ) = 720 . February has 75 shipments and 50 ( 12 ) + 25 ( 8 ) = 800 50(12)+25(8)=800 50 ( 12 ) + 25 ( 8 ) = 800 tonnes. March has 80 shipments and 45 ( 12 ) + 35 ( 8 ) = 820 45(12)+35(8)=820 45 ( 12 ) + 35 ( 8 ) = 820 tonnes. Keep both count and mass in separate columns.

Across the quarter there are 70 + 75 + 80 = 225 70+75+80=225 70 + 75 + 80 = 225 shipments carrying 720 + 800 + 820 = 2340 720+800+820=2340 720 + 800 + 820 = 2340 tonnes. The average load per shipment is 2340 / 225 = 10.4 2340/225=10.4 2340/225 = 10.4 tonnes. It is not the unweighted mean of 12 and 8, because the numbers of shipments differ. Nor is it the mean of the three monthly averages unless monthly shipment counts happen to be equal.

Tonnage rises from 720 to 800 between January and February. The increase is 80 tonnes, so the percentage increase is 80 / 720 × 100 ≈ 11.11 % 80/720\times100\approx11.11\% 80/720 × 100 ≈ 11.11% . Shipment count rises by only 5 / 70 × 100 ≈ 7.14 % 5/70\times100\approx7.14\% 5/70 × 100 ≈ 7.14% . These answers differ because the composition changed. The table supports the numerical comparison; it does not establish a real-world cause such as better staff productivity.

Use Venn diagrams for overlapping data

A Venn diagram records membership, not physical location or a required hierarchy. For two sets A and B: ∣ A ∪ B ∣ = ∣ A ∣ + ∣ B ∣ − ∣ A ∩ B ∣ |A\cup B|=|A|+|B|-|A\cap B| ∣ A ∪ B ∣ = ∣ A ∣ + ∣ B ∣ − ∣ A ∩ B ∣

The overlap is subtracted once because adding the two totals counted it twice. If a survey of 120 people finds 70 using A, 55 using B and 30 using both, A-only is 40, B-only is 25, and at least one is 95. The remaining 25 use neither. Check: 40 + 30 + 25 + 25 = 120 40+30+25+25=120 40 + 30 + 25 + 25 = 120 .

“At least one” includes the overlap. “Exactly one” excludes it and equals 70 + 55 − 2 ( 30 ) = 65 70+55-2(30)=65 70 + 55 − 2 ( 30 ) = 65 . “Both” means intersection, not union. A question about the share of A-users who also use B uses denominator 70, giving 30 / 70 30/70 30/70 ; the share of all surveyed people using both uses denominator 120, giving 30 / 120 30/120 30/120 .

For three sets, add individual totals, subtract pairwise intersections and add the triple intersection back. Check whether a phrase such as “A and B” includes people in all three sets or means “A and B only.” If 10 belong to A and B inclusive and 4 belong to all three, the A-and-B-only region is 6. Work from the innermost region outward rather than subtracting overlaps repeatedly without labeling them.

Arrange data using constraints

Data arrangement converts scattered conditions into an organized table. Suppose four fictional consignments P, Q, R and S use four distinct slots numbered 1–4. P is before Q, R is immediately after P, S is not last, and Q is in slot 4.

Fix Q in slot 4. The adjacent P–R block could occupy slots 1–2 or 2–3. If P–R occupies 1–2, S takes slot 3. If P–R occupies 2–3, S takes slot 1. Both arrangements satisfy every clue. Therefore, P's exact slot is not determined, while Q's slot is determined. Recording one valid table is not proof of a unique solution.

If an extra clue says S is immediately before Q, then S must occupy slot 3 and P–R must occupy 1–2. The unique order is P, R, S, Q. Notice how the added clue resolves the uncertainty. Do not import unstated rules about shipment priority or railway practice to fill a blank.

A reliable source-merging routine

List the exact quantity requested, including its unit and denominator.

Extract only the relevant facts from each source.

Establish whether categories overlap, are disjoint or are exhaustive.

Convert compatible units and periods before combining numbers.

Calculate and test totals against the original sources.

State whether the requested answer is unique or whether information is missing.

A final inference should be no stronger than the evidence. “February carried more tonnage” follows from the fictional table. “February was more profitable” does not follow without revenue and cost data. Treating absent data as zero, confusing percentages with counts, or selecting one arbitrary arrangement are reasoning errors even when the arithmetic is otherwise correct.