Study guide
10.2 Scatter Plots, Histograms & Distribution Curves
RRB Section Controller 2026: Free Written CBT Study Guide Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Exam Overview & Operational Profile
1.1 Written CBT Pattern, Scoring & Selection 1.2 Eligibility, Documents & A-2 Medical Requirements
2 Chapter 2: Number Systems & Arithmetic Foundations
2.1 Number Systems, Divisibility Rules, Prime Factorization & Remainder Theorem 2.2 Unit Digits, Cyclicity Rules & Power Modulo Calculations 2.3 HCF and LCM Properties, Prime Factorization & Practical Word Problems 2.4 Fractions, Decimals, Surds, Indices & BODMAS Simplification
3 Chapter 3: Commercial Arithmetic: Percentages, Profit & Rates
3.1 Percentages, Fractional Equivalents, Successive Variations & Population Formulas 3.2 Cost Price, Selling Price, Profit/Loss Percentage, Dishonest Dealer & Discount Schemes 3.3 Simple Interest, Compound Interest Formulas, Annual/Semi-Annual Compounding & Difference Traps
4 Chapter 4: Ratios, Proportions, Mixtures & Partnerships
4.1 Ratios, Duplicate/Sub-Duplicate Ratios, Direct and Inverse Variations & Proportional Sharing 4.2 Averages, Change in Average, Batsman/Bowling Averages & Replacement Problems 4.3 Rule of Alligation, Removal-Replacement Mixtures & Partnership Capital-Time Sharing
5 Chapter 5: Motion Dynamics, Time, Distance & Train Logistics
5.1 Time, Speed, Distance Relations, Average Speed & Unit Conversions 5.2 Train Problems: Passing Poles, Platforms, Moving Objects & Relative Speed in Opposite/Same Directions 5.3 Upstream, Downstream Boat Velocity, Still Water Speed & Circular Track Races
6 Chapter 6: Work Efficiency, Pipes & Operational Scheduling
6.1 Individual and Group Work, Efficiency Ratios, Work Equivalences & Mandays Formula 6.2 Alternate Day Working, Negative Work & Wage Distribution Based on Work Done 6.3 Inlet and Outlet Pipes, Net Filling Rate, Alternating Flow & Tank Leakage Problems
7 Chapter 7: Algebra, Linear Equations & Progressions
7.1 Algebraic Identities, Polynomial Factorization & Systems of Linear Equations in Two Variables 7.2 Quadratic Equations, Nature of Roots, Discriminant Analysis & Maximum/Minimum Values 7.3 Arithmetic Progressions (AP), General Term, Sum of n Terms & Sequence Modeling
8 Chapter 8: Mensuration: 2D Areas & 3D Solids
8.1 Lines, Angles, Triangle Theorems, Congruence/Similarity & Circle Tangent Properties 8.2 Perimeter and Area of Quadrilaterals, Polygons, Circles & Shaded Region Problems 8.3 Surface Area and Volume of Cubes, Cuboids, Cylinders, Cones, Spheres & Melting-Recasting Solids
9 Chapter 9: Statistics, Probability & Data Interpretation
9.1 Mean, Median, Mode, Range, Mean Deviation & Standard Deviation 9.2 Permutations, Combinations, Classical Probability, Independent Events & Odds 9.3 Tabular Data Interpretation, Bar Charts, Grouped Graphs & Percentage Calculation Shortcuts 9.4 Pie Charts (Angle vs Percentage), Line Trend Graphs & Quantitative Data Sufficiency
10 Chapter 10: Multi-Source & Graphical Analysis
10.1 Multi-Source Analysis, Set Data & Arrangement 10.2 Scatter Plots, Histograms & Distribution Curves
11 Chapter 11: Deductive Logic, Statements & Binary Puzzles
11.1 Syllogisms, Sets & Possibility Conclusions 11.2 Critical Reasoning: Implicit Assumptions, Strong vs Weak Arguments & Course of Action 11.3 Binary Logic: Truth-Tellers, Liars, Alternators & Matrix Logic Deductions
12 Chapter 12: Relational, Directional, Clock & Calendar Reasoning
12.1 Direct Family Relations, Coded Blood Relations & Family Tree Tree-Mapping Methods 12.2 Cardinal & Ordinal Directions, Multi-Step Turn Paths, Pythagorean Distance & Shadow Timing 12.3 Clock Hands Angular Speed, Angle Between Hands at Given Time, Coincidence & Faulty Clocks 12.4 Odd Days Concept, Reference Date Calculations, Leap Year Rules & Repeating Calendar Years
13 Chapter 13: English Reading Comprehension
13.1 English Comprehension: Main Idea, Support & Inference 13.2 English Comprehension: Application, Structure & Style
14 Chapter 14: Mental Reasoning: Analogies & Series
14.1 Semantic, Letter & Number Analogies 14.2 Number Series: Differences, Powers & Missing Terms 14.3 Interleaved, Recursive & Wrong-Term Series
15 Chapter 15: Mental Reasoning: Coding & Ranking
15.1 Letter Shifts, Reversal & Numerical Codes 15.2 Message Intersections & Conditional Coding Tables 15.3 Ranking, People Between & Position Interchanges
16 Chapter 16: Mental Reasoning: Seating Arrangements
16.1 Linear Seating & Parallel Rows 16.2 Circular Seating, Facing & Rotational Symmetry
10.2 Scatter Plots, Histograms & Distribution Curves
Key Takeaways Explain This Topic AI
A scatter point represents paired observations; association alone does not establish causation.
Interpolation lies inside the observed range; extrapolation needs additional justification.
For a density histogram, area rather than bar height represents frequency.
A cumulative count between two boundaries is the difference of their cumulative totals.
Last updated: October 2026
Read a scatter plot as paired observations
A scatter plot shows pairs of measurements. Each point has an x-coordinate and a y-coordinate belonging to the same observation. For example, an exercise might pair journey length with elapsed time for several fictional trips. Before interpreting a pattern, read both axis labels, scales, units and any legend identifying groups.
A point at ( 40 , 60 ) (40,60) ( 40 , 60 ) means x is 40 and y is 60 in the stated units. It does not mean that 60% of observations belong to a 40-unit category. Unlike a bar chart, the horizontal coordinate often represents a measured numerical variable, and point spacing can carry meaning. Do not count an apparent gap as missing observations unless the question explains what was sampled.
Direction, strength and unusual points
A rising cloud of points suggests a positive association: larger x-values tend to occur with larger y-values. A falling cloud suggests a negative association. A widely scattered cloud may show weak association or no clear pattern. A curved relationship can be strong even when it is not well described by a straight line.
Association does not establish causation. A relationship between journey distance and cost is evidence about those observed pairs, not proof that distance alone explains every cost difference. A third variable, such as shipment weight, may influence the measurements. In a CBT question, restrict the conclusion to what the data and accompanying text justify.
An outlier lies away from the main pattern. First check whether the point was read correctly; then decide what the question permits you to infer. An outlier is not automatically a recording error, and it should not be deleted merely because it weakens a convenient conclusion. It can strongly affect a calculated mean or fitted trend.
Worked example: trend and prediction
Consider these fictional pairs, with x measured in kilometers and y in minutes:
- x y
- 10 25
- 20 40
- 30 55
- 40 70
Each 10-kilometer increase accompanies a 15-minute increase, so the rate of change is 15 / 10 = 1.5 15/10=1.5 15/10 = 1.5 minutes per kilometer. These points fit y = 1.5 x + 10 y=1.5x+10 y = 1.5 x + 10 . For x = 25, the rule gives 47.5 minutes. This is interpolation because 25 lies within the observed x-range. A prediction at x = 100 is extrapolation ; the rule gives 160, but the observed range alone does not prove that the relationship continues that far.
The intercept 10 is the y-value of the mathematical line at x = 0. It could represent a fixed delay only if the problem supplies that interpretation. Do not turn a fitted parameter into an asserted operational fact. Likewise, the slope's unit is minutes per kilometer; reversing it changes the meaning.
The accompanying frequency profile plots the four delay-class midpoints used below. Its connecting curve is illustrative: the data give class totals, not a measured continuous density or exact within-class counts.
Understand a frequency distribution
A frequency distribution tells how observations are spread across values or intervals. A histogram uses adjacent numerical intervals, while a frequency polygon connects points representing class frequencies. A smooth distribution curve summarizes the overall shape. Read whether the vertical scale represents frequency, relative frequency or density before treating height as a count.
For a histogram with equal class widths and a frequency axis, a higher bar indicates a more frequent interval. With unequal class widths and a density axis, area represents frequency: height must be multiplied by width. For example, a class of width 10 and density 3 represents frequency 30, while a class of width 20 and density 2 represents frequency 40. The shorter second bar contains more observations.
A symmetric distribution has balanced tails around its center. A right-skewed distribution has a longer right tail; a left-skewed distribution has a longer left tail. Do not identify skewness from the side containing the tallest point alone. In many familiar right-skewed examples the mean exceeds the median, but this is a useful pattern rather than a rule that determines every possible dataset.
Cumulative information and percentages
Suppose a fictional delay distribution has 20 observations in 0–10 minutes, 30 in 10–20, 25 in 20–30 and 25 in 30–40, with intervals defined as including their lower endpoint and excluding their upper endpoint. There are 100 observations. The number below 20 minutes is 20 + 30 = 50 20+30=50 20 + 30 = 50 . The number from 20 up to 40 is also 50. The count below 30 is 75.
A cumulative graph at a class boundary gives a running total. A count between two boundaries is obtained by subtracting their cumulative totals. It is not the sum of the two plotted heights. If only class totals are given, the exact number below a value inside a class, such as 17 minutes, is not known without an additional assumption about the within-class distribution.
Interpret curve areas carefully
For a probability-density curve, total area is one and an interval's area is its probability. The height at one point is not that point's probability. For basic normal-distribution exercises explicitly assuming a normal model, symmetry places half the area on either side of the mean. The familiar approximate 68%, 95% and 99.7% intervals refer to one, two and three standard deviations under that model; they must not be applied to every distribution.
When answering, identify the representation first, then choose the correct operation: read coordinates, compare a trend, add frequencies, subtract cumulative totals or compare areas. This prevents a single visual habit from being misapplied across scatter plots, histograms and distribution curves.