Study guide
9.4 Pie Charts (Angle vs Percentage), Line Trend Graphs & Quantitative Data Sufficiency
RRB Section Controller 2026: Free Written CBT Study Guide Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Exam Overview & Operational Profile
1.1 Written CBT Pattern, Scoring & Selection 1.2 Eligibility, Documents & A-2 Medical Requirements
2 Chapter 2: Number Systems & Arithmetic Foundations
2.1 Number Systems, Divisibility Rules, Prime Factorization & Remainder Theorem 2.2 Unit Digits, Cyclicity Rules & Power Modulo Calculations 2.3 HCF and LCM Properties, Prime Factorization & Practical Word Problems 2.4 Fractions, Decimals, Surds, Indices & BODMAS Simplification
3 Chapter 3: Commercial Arithmetic: Percentages, Profit & Rates
3.1 Percentages, Fractional Equivalents, Successive Variations & Population Formulas 3.2 Cost Price, Selling Price, Profit/Loss Percentage, Dishonest Dealer & Discount Schemes 3.3 Simple Interest, Compound Interest Formulas, Annual/Semi-Annual Compounding & Difference Traps
4 Chapter 4: Ratios, Proportions, Mixtures & Partnerships
4.1 Ratios, Duplicate/Sub-Duplicate Ratios, Direct and Inverse Variations & Proportional Sharing 4.2 Averages, Change in Average, Batsman/Bowling Averages & Replacement Problems 4.3 Rule of Alligation, Removal-Replacement Mixtures & Partnership Capital-Time Sharing
5 Chapter 5: Motion Dynamics, Time, Distance & Train Logistics
5.1 Time, Speed, Distance Relations, Average Speed & Unit Conversions 5.2 Train Problems: Passing Poles, Platforms, Moving Objects & Relative Speed in Opposite/Same Directions 5.3 Upstream, Downstream Boat Velocity, Still Water Speed & Circular Track Races
6 Chapter 6: Work Efficiency, Pipes & Operational Scheduling
6.1 Individual and Group Work, Efficiency Ratios, Work Equivalences & Mandays Formula 6.2 Alternate Day Working, Negative Work & Wage Distribution Based on Work Done 6.3 Inlet and Outlet Pipes, Net Filling Rate, Alternating Flow & Tank Leakage Problems
7 Chapter 7: Algebra, Linear Equations & Progressions
7.1 Algebraic Identities, Polynomial Factorization & Systems of Linear Equations in Two Variables 7.2 Quadratic Equations, Nature of Roots, Discriminant Analysis & Maximum/Minimum Values 7.3 Arithmetic Progressions (AP), General Term, Sum of n Terms & Sequence Modeling
8 Chapter 8: Mensuration: 2D Areas & 3D Solids
8.1 Lines, Angles, Triangle Theorems, Congruence/Similarity & Circle Tangent Properties 8.2 Perimeter and Area of Quadrilaterals, Polygons, Circles & Shaded Region Problems 8.3 Surface Area and Volume of Cubes, Cuboids, Cylinders, Cones, Spheres & Melting-Recasting Solids
9 Chapter 9: Statistics, Probability & Data Interpretation
9.1 Mean, Median, Mode, Range, Mean Deviation & Standard Deviation 9.2 Permutations, Combinations, Classical Probability, Independent Events & Odds 9.3 Tabular Data Interpretation, Bar Charts, Grouped Graphs & Percentage Calculation Shortcuts 9.4 Pie Charts (Angle vs Percentage), Line Trend Graphs & Quantitative Data Sufficiency
10 Chapter 10: Multi-Source & Graphical Analysis
10.1 Multi-Source Analysis, Set Data & Arrangement 10.2 Scatter Plots, Histograms & Distribution Curves
11 Chapter 11: Deductive Logic, Statements & Binary Puzzles
11.1 Syllogisms, Sets & Possibility Conclusions 11.2 Critical Reasoning: Implicit Assumptions, Strong vs Weak Arguments & Course of Action 11.3 Binary Logic: Truth-Tellers, Liars, Alternators & Matrix Logic Deductions
12 Chapter 12: Relational, Directional, Clock & Calendar Reasoning
12.1 Direct Family Relations, Coded Blood Relations & Family Tree Tree-Mapping Methods 12.2 Cardinal & Ordinal Directions, Multi-Step Turn Paths, Pythagorean Distance & Shadow Timing 12.3 Clock Hands Angular Speed, Angle Between Hands at Given Time, Coincidence & Faulty Clocks 12.4 Odd Days Concept, Reference Date Calculations, Leap Year Rules & Repeating Calendar Years
13 Chapter 13: English Reading Comprehension
13.1 English Comprehension: Main Idea, Support & Inference 13.2 English Comprehension: Application, Structure & Style
14 Chapter 14: Mental Reasoning: Analogies & Series
14.1 Semantic, Letter & Number Analogies 14.2 Number Series: Differences, Powers & Missing Terms 14.3 Interleaved, Recursive & Wrong-Term Series
15 Chapter 15: Mental Reasoning: Coding & Ranking
15.1 Letter Shifts, Reversal & Numerical Codes 15.2 Message Intersections & Conditional Coding Tables 15.3 Ranking, People Between & Position Interchanges
16 Chapter 16: Mental Reasoning: Seating Arrangements
16.1 Linear Seating & Parallel Rows 16.2 Circular Seating, Facing & Rotational Symmetry
9.4 Pie Charts (Angle vs Percentage), Line Trend Graphs & Quantitative Data Sufficiency
Key Takeaways Explain This Topic AI
Pie charts represent circular partitions where 360 ∘ 360^\circ 36 0 ∘ corresponds to 100 % 100\% 100% ; conversion factors are 1 % = 3.6 ∘ 1\% = 3.6^\circ 1% = 3. 6 ∘ and 1 ∘ = 5 18 % ≈ 0.278 % 1^\circ = \frac{5}{18}\% \approx 0.278\% 1 ∘ = 18 5 % ≈ 0.278% .
Central angle formula θ = Value Total × 360 ∘ \theta = \frac{\text{Value}}{\text{Total}} \times 360^\circ θ = Total Value × 36 0 ∘ enables direct ratio comparisons without resolving absolute values when analyzing single charts.
Dual and multi-tier pie charts require verifying whether base totals are identical; comparing absolute quantities across two pie charts without multiplying by their respective totals is a classic exam trap.
Between two line-graph observations, rate of change is Δ y / Δ t \Delta y/\Delta t Δ y /Δ t . A connecting line alone does not prove unobserved intermediate values or acceleration.
For data sufficiency, test each statement alone before combining them. The five outcomes shown here are practice classifications; the actual question determines its option codes.
Last updated: October 2026
Pie Charts: Geometry, Angles & Percentage Transformations
A pie chart (circle graph) represents proportional allocations of a total aggregate across mutually exclusive component categories as radial sectors of a circle. +-----------------------------------------------------------------------------+
- | PIE CHART ANGULAR METRIC SYSTEM |
- +-----------------------------------------------------------------------------+
- | Total Angular Measure of Circle = 360° |
- | Total Percentage Distribution = 100% |
- | |
- | Equivalence Identity: 360° <=======> 100% |
- | 1% = 3.6° = (18/5)° |
- | 1° = (100/360)% = (5/18)% ≈ 0.2778% |
- +-----------------------------------------------------------------------------+
- Mathematical Conversion Formulas
Percentage to Central Angle (Degrees): θ = P × 3.6 ∘ = P × ( 18 5 ) ∘ \theta = P \times 3.6^\circ = P \times \left( \frac{18}{5} \right)^\circ θ = P × 3. 6 ∘ = P × ( 5 18 ) ∘
Central Angle (Degrees) to Percentage: P = θ 3.6 = θ × ( 5 18 ) % P = \frac{\theta}{3.6} = \theta \times \left( \frac{5}{18} \right)\% P = 3.6 θ = θ × ( 18 5 ) %
Central Angle from Raw Value: θ i = ( Component Value i Total Aggregate Value ) × 360 ∘ \theta_i = \left( \frac{\text{Component Value}_i}{\text{Total Aggregate Value}} \right) \times 360^\circ θ i = ( Total Aggregate Value Component Value i ) × 36 0 ∘
Absolute Value from Central Angle: Component Value i = ( θ i 360 ∘ ) × Total Aggregate Value \text{Component Value}_i = \left( \frac{\theta_i}{360^\circ} \right) \times \text{Total Aggregate Value} Component Value i = ( 36 0 ∘ θ i ) × Total Aggregate Value
Angle-Percentage Benchmark Pairs
- Percentage ( P P P ) Central Angle ( θ \theta θ ) Common Railway Budget Context
- 5 % 5\% 5% 18 ∘ 18^\circ 1 8 ∘ Staff training & welfare allocations
- 10 % 10\% 10% 36 ∘ 36^\circ 3 6 ∘ Passenger amenities & station redevelopment
- 12.5 % 12.5\% 12.5% 45 ∘ 45^\circ 4 5 ∘ Signaling & telecommunication renewals
- 15 % 15\% 15% 54 ∘ 54^\circ 5 4 ∘ Traction distribution (OHE) electrification
- 20 % 20\% 20% 72 ∘ 72^\circ 7 2 ∘ Rolling stock maintenance & spares
- 25 % 25\% 25% 90 ∘ 90^\circ 9 0 ∘ (Right angle) Operating fuel and electric energy costs
- 30 % 30\% 30% 108 ∘ 108^\circ 10 8 ∘ Track renewal & bridge rehabilitation
- 33 1 3 % 33\frac{1}{3}\% 33 3 1 % 120 ∘ 120^\circ 12 0 ∘ Direct staff wages and operating salaries
- 50 % 50\% 50% 180 ∘ 180^\circ 18 0 ∘ (Straight line) Bulk commodity freight earnings share
Tip
Direct Sector Arithmetic: When finding the difference in expenditure between two sectors in the same pie chart, do not compute individual rupee amounts and subtract! Subtract their central angles first: Δ Amount = θ 1 − θ 2 360 ∘ × Total \Delta \text{Amount} = \frac{\theta_1 - \theta_2}{360^\circ} \times \text{Total} Δ Amount = 36 0 ∘ θ 1 − θ 2 × Total .
Dual & Multi-Tier Pie Charts
When analyzing two related pie charts (e.g., Chart 1: Total Divisional Expenses in 2024 vs. Chart 2: Total Divisional Expenses in 2026):
Caution
The Unequal Base Comparison Trap: Never compare angular sizes or percentage slices between two different pie charts directly without factoring in their total values! A 36 ∘ 36^\circ 3 6 ∘ slice ( 10 % 10\% 10% ) in a ₹2,000-crore budget represents ₹200 crore, whereas a 72 ∘ 72^\circ 7 2 ∘ slice ( 20 % 20\% 20% ) in a ₹800-crore budget represents only ₹160 crore. Absolute values can only be compared after multiplying each sector by its chart's respective base total.
Line Trend Graphs & Continuous Time-Series Dynamics
Line graphs connect discrete observations to show a trend. Read the plotted observations and axis scales first. A connecting line or smoothed profile does not establish values between observations unless an interpolation model is specified. Rates of change between observations use their numerical differences, not the visual steepness alone. +-----------------------------------------------------------------------------+
- | LINE GRAPH SLOPE INTERPRETATION |
- +-----------------------------------------------------------------------------+
- | Slope m = Δy / Δx = (y_2 - y_1) / (t_2 - t_1) |
- | |
- | - Steep Positive Slope: Rapid operational expansion / acceleration |
- | - Moderate Positive Slope: Steady incremental growth |
- | - Horizontal Line (m = 0): Zero change / Stagnation |
- | - Negative Slope (m < 0): Operational contraction / Performance decline |
- | - Intersection Point: Epoch of quantitative parity between two systems |
- +-----------------------------------------------------------------------------+
- Multi-Line Graph Interpretation Techniques
Distance-Time Control Charts: Plotted in railway control offices where the slope represents velocity ( v = Δ d Δ t v = \frac{\Delta d}{\Delta t} v = Δ t Δ d ). Parallel lines signify equal speeds and constant headway. Converging lines indicate a faster trailing train closing the distance to a slower preceding train.
Margin Analysis: The vertical gap between a revenue line and an expenditure line represents net operating margin. The point where the two lines intersect is the break-even point .
Venn Diagram Analytics for Three Sets
Data interpretation sets frequently model cross-sectional memberships (e.g., train operations staff qualified in Safety, Electrical OHE, and Signaling systems).
Disjoint region In A? In B? In C?
- A only Yes No No
- B only No Yes No
- C only No No Yes
- A and B only Yes Yes No
- A and C only Yes No Yes
- B and C only No Yes Yes
- All three Yes Yes Yes
- None No No No
The eight rows partition the universe. Pairwise intersections in the formulas include the all-three region.
Essential Algebraic Formulas for 3-Set Venn Analysis
Total Union of Three Sets: n ( A ∪ B ∪ C ) = n ( A ) + n ( B ) + n ( C ) − [ n ( A ∩ B ) + n ( B ∩ C ) + n ( C ∩ A ) ] + n ( A ∩ B ∩ C ) n(A \cup B \cup C) = n(A) + n(B) + n(C) - [n(A \cap B) + n(B \cap C) + n(C \cap A)] + n(A \cap B \cap C) n ( A ∪ B ∪ C ) = n ( A ) + n ( B ) + n ( C ) − [ n ( A ∩ B ) + n ( B ∩ C ) + n ( C ∩ A )] + n ( A ∩ B ∩ C )
Number of Elements in Exactly Two Sets: n ( Exactly 2 ) = [ n ( A ∩ B ) + n ( B ∩ C ) + n ( C ∩ A ) ] − 3 ⋅ n ( A ∩ B ∩ C ) n(\text{Exactly 2}) = [n(A \cap B) + n(B \cap C) + n(C \cap A)] - 3 \cdot n(A \cap B \cap C) n ( Exactly 2 ) = [ n ( A ∩ B ) + n ( B ∩ C ) + n ( C ∩ A )] − 3 ⋅ n ( A ∩ B ∩ C )
Number of Elements in At Least Two Sets: n ( At least 2 ) = [ n ( A ∩ B ) + n ( B ∩ C ) + n ( C ∩ A ) ] − 2 ⋅ n ( A ∩ B ∩ C ) n(\text{At least 2}) = [n(A \cap B) + n(B \cap C) + n(C \cap A)] - 2 \cdot n(A \cap B \cap C) n ( At least 2 ) = [ n ( A ∩ B ) + n ( B ∩ C ) + n ( C ∩ A )] − 2 ⋅ n ( A ∩ B ∩ C )
Number of Elements in Exactly One Set: n ( Exactly 1 ) = n ( A ) + n ( B ) + n ( C ) − 2 [ n ( A ∩ B ) + n ( B ∩ C ) + n ( C ∩ A ) ] + 3 ⋅ n ( A ∩ B ∩ C ) n(\text{Exactly 1}) = n(A) + n(B) + n(C) - 2[n(A \cap B) + n(B \cap C) + n(C \cap A)] + 3 \cdot n(A \cap B \cap C) n ( Exactly 1 ) = n ( A ) + n ( B ) + n ( C ) − 2 [ n ( A ∩ B ) + n ( B ∩ C ) + n ( C ∩ A )] + 3 ⋅ n ( A ∩ B ∩ C )
Quantitative Data Sufficiency (DS) Framework
Data Sufficiency questions assess mathematical reasoning and decision logic rather than mere computational execution. Each question presents a problem stem followed by two numbered statements, labelled (1) and (2).
Five Common Sufficiency Outcomes for Practice
The codes below are an exercise convention. CEN 03/2026 does not prescribe these answer codes; always read the actual options.
- Option Code Evaluation Verdict
- (A) Statement (1) ALONE is sufficient , but Statement (2) alone is NOT sufficient
- (B) Statement (2) ALONE is sufficient , but Statement (1) alone is NOT sufficient
- (C) BOTH statements TOGETHER are sufficient , but NEITHER statement ALONE is sufficient
- (D) EACH statement ALONE is sufficient (Both statements independently provide unique answers)
- (E) Statements (1) and (2) TOGETHER are NOT sufficient (Additional information is required)
- The Systematic Elimination Algorithm (12-TEN Flowchart) +---------------------------------------+
- | Evaluate Statement (1) ALONE |
- +---------------------------------------+
- / \
- SUFFICIENT / \ NOT SUFFICIENT
- / \
- v v
Eliminate Options: Eliminate Options:
- (B), (C), (E) (A), (D)
- │ │
- ▼ ▼
- +-------------------------------+ +-------------------------------+
- | Evaluate Statement (2) ALONE | | Evaluate Statement (2) ALONE |
- +-------------------------------+ +-------------------------------+
- / \ / \
- SUFFICIENT / NOT SUFFICIENT\ SUFFICIENT / NOT SUFFICIENT\
- / \ / \
- v v v v
- ANSWER: (D) ANSWER: (A) ANSWER: (B) Combine (1) + (2)
- │
- / \
- SUFFICIENT / NOT SUFFICIENT \
- v v
- ANSWER: (C) ANSWER: (E)
- The Three Ironclad Rules of Data Sufficiency
Stop Once Sufficiency Is Established: The moment you establish that a statement yields a single, unique solution (e.g., a linear equation with one unknown), stop calculating immediately and mark it sufficient. A calculation can still be useful to verify feasibility or exclude an extraneous root; do not continue calculating after the required uniqueness is established.
The Clean Slate Principle (Zero Carryover): When evaluating Statement (2) alone, you must completely erase Statement (1) from your working memory . Never allow information from Statement (1) to leak into the independent evaluation of Statement (2).
Uniqueness is Paramount: A statement is sufficient if and only if it leads to exactly one unique answer . If a quadratic equation yields two possible values (e.g., speed = 40 km/h = 40 \text{ km/h} = 40 km/h or 90 km/h 90 \text{ km/h} 90 km/h ) and neither can be rejected by physical constraints, the statement is NOT sufficient .
- Worked Examples
- Worked Example 1: Pie Chart Budget Allocation and Angular Conversion
Data Context: A divisional railway administration allocates an annual safety modernization budget of ₹1,200 crore as depicted in a central angle pie chart:
- Budget Head Central Angle ( θ \theta θ )
- Track Renewal (TR) 108 ∘ 108^\circ 10 8 ∘
- Signaling & Telecommunication (S&T) 72 ∘ 72^\circ 7 2 ∘
- Rolling Stock Maintenance (RSM) 90 ∘ 90^\circ 9 0 ∘
- Electrification & OHE (TRD) 54 ∘ 54^\circ 5 4 ∘
- Passenger Amenities (PA) 36 ∘ 36^\circ 3 6 ∘
- Total 360 ∘ 360^\circ 36 0 ∘
Questions to Solve:
What percentage of the total budget is allocated to Track Renewal?
What is the absolute rupee allocation (in ₹ crore) for Signaling & Telecommunication?
How much more money is allocated to Rolling Stock Maintenance than to Electrification & OHE?
Step 1: Calculate Track Renewal percentage share (Question 1): % Share = 108 ∘ 360 ∘ × 100 % = 3 10 × 100 % = 30.00 % \% \text{ Share} = \frac{108^\circ}{360^\circ} \times 100\% = \frac{3}{10} \times 100\% = 30.00\% % Share = 36 0 ∘ 10 8 ∘ × 100% = 10 3 × 100% = 30.00%
(Shortcut check: 108 × 5 18 % = 6 × 5 % = 30 % 108 \times \frac{5}{18}\% = 6 \times 5\% = 30\% 108 × 18 5 % = 6 × 5% = 30% .)
Step 2: Calculate absolute S&T allocation (Question 2): S&T Allocation = ( 72 ∘ 360 ∘ ) × INR 1 , 200 cr = 1 5 × INR 1 , 200 cr = INR 240 crore \text{S\&T Allocation} = \left( \frac{72^\circ}{360^\circ} \right) \times \text{INR } 1,200 \text{ cr} = \frac{1}{5} \times \text{INR } 1,200 \text{ cr} = \text{INR } 240 \text{ crore} S&T Allocation = ( 36 0 ∘ 7 2 ∘ ) × INR 1 , 200 cr = 5 1 × INR 1 , 200 cr = INR 240 crore
Step 3: Difference between RSM and TRD (Question 3): Subtract central angles directly before multiplying: Δ θ = 90 ∘ − 54 ∘ = 36 ∘ \Delta \theta = 90^\circ - 54^\circ = 36^\circ Δ θ = 9 0 ∘ − 5 4 ∘ = 3 6 ∘ Δ Amount = ( 36 ∘ 360 ∘ ) × INR 1 , 200 cr = 1 10 × INR 1 , 200 cr = INR 120 crore \Delta \text{Amount} = \left( \frac{36^\circ}{360^\circ} \right) \times \text{INR } 1,200 \text{ cr} = \frac{1}{10} \times \text{INR } 1,200 \text{ cr} = \text{INR } 120 \text{ crore} Δ Amount = ( 36 0 ∘ 3 6 ∘ ) × INR 1 , 200 cr = 10 1 × INR 1 , 200 cr = INR 120 crore
Conclusion: Track Renewal is 30% , S&T receives ₹240 crore , and RSM exceeds TRD by ₹120 crore .
Worked Example 2: Three-Set Venn Analysis of Station Operating Staff Certifications
Problem: A railway operating division evaluates a cohort of 200 station operations staff across three fictional training categories:
- Certified in General & Subsidiary Safety Rules ( S S S ): 110
- Certified in Electric Traction Safety Rules ( E E E ): 95
- Certified in Modern Electronic Signalling & Interlocking ( I I I ): 85
- Certified in both Safety and Traction ( S ∩ E S \cap E S ∩ E ): 45
- Certified in both Traction and Signalling ( E ∩ I E \cap I E ∩ I ): 40
- Certified in both Safety and Signalling ( S ∩ I S \cap I S ∩ I ): 35
- Certified in all three fields ( S ∩ E ∩ I S \cap E \cap I S ∩ E ∩ I ): 20
Determine:
(a) The number of staff possessing certification in at least one field.
(b) The number of staff holding zero certifications.
(c) The number of staff certified in exactly one field.
(d) The number of staff certified in exactly two fields.
Step 1: Compute Total Union n ( S ∪ E ∪ I ) n(S \cup E \cup I) n ( S ∪ E ∪ I ) (Part a): n ( S ∪ E ∪ I ) = n ( S ) + n ( E ) + n ( I ) − [ n ( S ∩ E ) + n ( E ∩ I ) + n ( S ∩ I ) ] + n ( S ∩ E ∩ I ) n(S \cup E \cup I) = n(S) + n(E) + n(I) - [n(S \cap E) + n(E \cap I) + n(S \cap I)] + n(S \cap E \cap I) n ( S ∪ E ∪ I ) = n ( S ) + n ( E ) + n ( I ) − [ n ( S ∩ E ) + n ( E ∩ I ) + n ( S ∩ I )] + n ( S ∩ E ∩ I ) n ( S ∪ E ∪ I ) = 110 + 95 + 85 − [ 45 + 40 + 35 ] + 20 n(S \cup E \cup I) = 110 + 95 + 85 - [45 + 40 + 35] + 20 n ( S ∪ E ∪ I ) = 110 + 95 + 85 − [ 45 + 40 + 35 ] + 20 n ( S ∪ E ∪ I ) = 290 − 120 + 20 = 190 n(S \cup E \cup I) = 290 - 120 + 20 = 190 n ( S ∪ E ∪ I ) = 290 − 120 + 20 = 190
190 staff members hold at least one certification.
Step 2: Staff with Zero Certifications (Part b): n ( None ) = Total − n ( S ∪ E ∪ I ) = 200 − 190 = 10 n(\text{None}) = \text{Total} - n(S \cup E \cup I) = 200 - 190 = 10 n ( None ) = Total − n ( S ∪ E ∪ I ) = 200 − 190 = 10
Step 3: Staff Certified in Exactly Two Fields (Part d): n ( Exactly 2 ) = [ n ( S ∩ E ) + n ( E ∩ I ) + n ( S ∩ I ) ] − 3 ⋅ n ( S ∩ E ∩ I ) n(\text{Exactly 2}) = [n(S \cap E) + n(E \cap I) + n(S \cap I)] - 3 \cdot n(S \cap E \cap I) n ( Exactly 2 ) = [ n ( S ∩ E ) + n ( E ∩ I ) + n ( S ∩ I )] − 3 ⋅ n ( S ∩ E ∩ I ) n ( Exactly 2 ) = 120 − 3 ( 20 ) = 120 − 60 = 60 n(\text{Exactly 2}) = 120 - 3(20) = 120 - 60 = 60 n ( Exactly 2 ) = 120 − 3 ( 20 ) = 120 − 60 = 60
Step 4: Staff Certified in Exactly One Field (Part c): n ( Exactly 1 ) = n ( S ∪ E ∪ I ) − n ( Exactly 2 ) − n ( All 3 ) n(\text{Exactly 1}) = n(S \cup E \cup I) - n(\text{Exactly 2}) - n(\text{All 3}) n ( Exactly 1 ) = n ( S ∪ E ∪ I ) − n ( Exactly 2 ) − n ( All 3 ) n ( Exactly 1 ) = 190 − 60 − 20 = 110 n(\text{Exactly 1}) = 190 - 60 - 20 = 110 n ( Exactly 1 ) = 190 − 60 − 20 = 110
(Cross-check individual sub-regions: Only S = 110 − 25 − 15 − 20 = 50 S = 110 - 25 - 15 - 20 = 50 S = 110 − 25 − 15 − 20 = 50 ; Only E = 95 − 25 − 20 − 20 = 30 E = 95 - 25 - 20 - 20 = 30 E = 95 − 25 − 20 − 20 = 30 ; Only I = 85 − 15 − 20 − 20 = 30 I = 85 - 15 - 20 - 20 = 30 I = 85 − 15 − 20 − 20 = 30 . Total = 50 + 30 + 30 = 110 = 50 + 30 + 30 = 110 = 50 + 30 + 30 = 110 . Sum = 110 + 60 + 20 + 10 = 200 = 110 + 60 + 20 + 10 = 200 = 110 + 60 + 20 + 10 = 200 .)
Conclusion: (a) 190 staff , (b) 10 staff , (c) 110 staff , (d) 60 staff .
Worked Example 3: Quantitative Data Sufficiency in Sectional Train Speed
Problem: Determine the uniform speed of a hypothetical Train A (in km/h) as it travels between Station P and Station Q. Is the information provided sufficient to answer the question?
Statement (1): Train A completely passes a stationary 350-meter-long platform in 27 seconds.
Statement (2): Train A completely passes an electric traction pole located beside the track in 9 seconds.
Step 1: Evaluate Statement (1) ALONE: Let train speed be v v v (m/s) and train length be L T L_T L T (meters). Distance = L T + 350 = v × 27 \text{Distance} = L_T + 350 = v \times 27 Distance = L T + 350 = v × 27
This is a single linear equation with two unknown variables ( L T L_T L T and v v v ). We cannot determine a unique numerical value for v v v .
Therefore, Statement (1) ALONE is NOT sufficient . (Eliminate Options A and D from consideration).
Step 2: Evaluate Statement (2) ALONE (Clean Slate): Passing a point object (traction pole) of negligible width: Distance = L T = v × 9 \text{Distance} = L_T = v \times 9 Distance = L T = v × 9
This is also a single equation with two unknown variables ( L T L_T L T and v v v ). We cannot determine a unique value for v v v .
Therefore, Statement (2) ALONE is NOT sufficient . (Eliminate Option B from consideration).
Step 3: Combine Statements (1) and (2) TOGETHER: From Statement (2), substitute L T = 9 v L_T = 9v L T = 9 v into the equation from Statement (1): 9 v + 350 = 27 v 9v + 350 = 27v 9 v + 350 = 27 v 18 v = 350 ⟹ v = 350 18 = 175 9 m/s 18v = 350 \implies v = \frac{350}{18} = \frac{175}{9} \text{ m/s} 18 v = 350 ⟹ v = 18 350 = 9 175 m/s
Converting to km/h: v = 175 9 × 18 5 = 35 × 2 = 70 km/h v = \frac{175}{9} \times \frac{18}{5} = 35 \times 2 = 70 \text{ km/h} v = 9 175 × 5 18 = 35 × 2 = 70 km/h .
A single unique value is determined.
Verdict: BOTH statements TOGETHER are sufficient, but NEITHER statement ALONE is sufficient ( Option C ).
The budgets and certification groups here are fictional exercise inputs, not published allocations or statutory credential requirements. The listed five sufficiency outcomes illustrate a common logical classification, not an official RRB answer-code guarantee: always use the actual options in the question.