Study guide

9.1 Mean, Median, Mode, Range, Mean Deviation & Standard Deviation

RRB Section Controller 2026: Free Written CBT Study Guide Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Exam Overview & Operational Profile

1.1 Written CBT Pattern, Scoring & Selection 1.2 Eligibility, Documents & A-2 Medical Requirements

2 Chapter 2: Number Systems & Arithmetic Foundations

2.1 Number Systems, Divisibility Rules, Prime Factorization & Remainder Theorem 2.2 Unit Digits, Cyclicity Rules & Power Modulo Calculations 2.3 HCF and LCM Properties, Prime Factorization & Practical Word Problems 2.4 Fractions, Decimals, Surds, Indices & BODMAS Simplification

3 Chapter 3: Commercial Arithmetic: Percentages, Profit & Rates

3.1 Percentages, Fractional Equivalents, Successive Variations & Population Formulas 3.2 Cost Price, Selling Price, Profit/Loss Percentage, Dishonest Dealer & Discount Schemes 3.3 Simple Interest, Compound Interest Formulas, Annual/Semi-Annual Compounding & Difference Traps

4 Chapter 4: Ratios, Proportions, Mixtures & Partnerships

4.1 Ratios, Duplicate/Sub-Duplicate Ratios, Direct and Inverse Variations & Proportional Sharing 4.2 Averages, Change in Average, Batsman/Bowling Averages & Replacement Problems 4.3 Rule of Alligation, Removal-Replacement Mixtures & Partnership Capital-Time Sharing

5 Chapter 5: Motion Dynamics, Time, Distance & Train Logistics

5.1 Time, Speed, Distance Relations, Average Speed & Unit Conversions 5.2 Train Problems: Passing Poles, Platforms, Moving Objects & Relative Speed in Opposite/Same Directions 5.3 Upstream, Downstream Boat Velocity, Still Water Speed & Circular Track Races

6 Chapter 6: Work Efficiency, Pipes & Operational Scheduling

6.1 Individual and Group Work, Efficiency Ratios, Work Equivalences & Mandays Formula 6.2 Alternate Day Working, Negative Work & Wage Distribution Based on Work Done 6.3 Inlet and Outlet Pipes, Net Filling Rate, Alternating Flow & Tank Leakage Problems

7 Chapter 7: Algebra, Linear Equations & Progressions

7.1 Algebraic Identities, Polynomial Factorization & Systems of Linear Equations in Two Variables 7.2 Quadratic Equations, Nature of Roots, Discriminant Analysis & Maximum/Minimum Values 7.3 Arithmetic Progressions (AP), General Term, Sum of n Terms & Sequence Modeling

8 Chapter 8: Mensuration: 2D Areas & 3D Solids

8.1 Lines, Angles, Triangle Theorems, Congruence/Similarity & Circle Tangent Properties 8.2 Perimeter and Area of Quadrilaterals, Polygons, Circles & Shaded Region Problems 8.3 Surface Area and Volume of Cubes, Cuboids, Cylinders, Cones, Spheres & Melting-Recasting Solids

9 Chapter 9: Statistics, Probability & Data Interpretation

9.1 Mean, Median, Mode, Range, Mean Deviation & Standard Deviation 9.2 Permutations, Combinations, Classical Probability, Independent Events & Odds 9.3 Tabular Data Interpretation, Bar Charts, Grouped Graphs & Percentage Calculation Shortcuts 9.4 Pie Charts (Angle vs Percentage), Line Trend Graphs & Quantitative Data Sufficiency

10 Chapter 10: Multi-Source & Graphical Analysis

10.1 Multi-Source Analysis, Set Data & Arrangement 10.2 Scatter Plots, Histograms & Distribution Curves

11 Chapter 11: Deductive Logic, Statements & Binary Puzzles

11.1 Syllogisms, Sets & Possibility Conclusions 11.2 Critical Reasoning: Implicit Assumptions, Strong vs Weak Arguments & Course of Action 11.3 Binary Logic: Truth-Tellers, Liars, Alternators & Matrix Logic Deductions

12 Chapter 12: Relational, Directional, Clock & Calendar Reasoning

12.1 Direct Family Relations, Coded Blood Relations & Family Tree Tree-Mapping Methods 12.2 Cardinal & Ordinal Directions, Multi-Step Turn Paths, Pythagorean Distance & Shadow Timing 12.3 Clock Hands Angular Speed, Angle Between Hands at Given Time, Coincidence & Faulty Clocks 12.4 Odd Days Concept, Reference Date Calculations, Leap Year Rules & Repeating Calendar Years

13 Chapter 13: English Reading Comprehension

13.1 English Comprehension: Main Idea, Support & Inference 13.2 English Comprehension: Application, Structure & Style

14 Chapter 14: Mental Reasoning: Analogies & Series

14.1 Semantic, Letter & Number Analogies 14.2 Number Series: Differences, Powers & Missing Terms 14.3 Interleaved, Recursive & Wrong-Term Series

15 Chapter 15: Mental Reasoning: Coding & Ranking

15.1 Letter Shifts, Reversal & Numerical Codes 15.2 Message Intersections & Conditional Coding Tables 15.3 Ranking, People Between & Position Interchanges

16 Chapter 16: Mental Reasoning: Seating Arrangements

16.1 Linear Seating & Parallel Rows 16.2 Circular Seating, Facing & Rotational Symmetry

9.1 Mean, Median, Mode, Range, Mean Deviation & Standard Deviation

Key Takeaways Explain This Topic AI

Arithmetic mean represents the first moment about the origin; calculation methods include direct ( x ˉ = ∑ f i x i N \bar{x} = \frac{\sum f_i x_i}{N} x ˉ = N ∑ f i ​ x i ​ ​ ), assumed mean ( A + ∑ f i d i N A + \frac{\sum f_i d_i}{N} A + N ∑ f i ​ d i ​ ​ ), and step-deviation ( A + h ∑ f i u i N A + h \frac{\sum f_i u_i}{N} A + h N ∑ f i ​ u i ​ ​ ).

Median partitions sorted data into equal halves; for grouped frequency distributions, M = L + ( N / 2 − C F f ) h M = L + \left(\frac{N/2 - CF}{f}\right)h M = L + ( f N /2 − CF ​ ) h , using the preceding cumulative frequency ( C F CF CF ).

Grouped median and mode formulas estimate central values from class frequencies. Pearson’s mode ≈ 3 median - 2 mean relation is an approximation for suitable moderately skewed distributions.

The range measures extremes; mean absolute deviation is minimized at a median; population variance averages squared deviations from the mean.

For y = ax + b with nonzero a, mean, median and modes transform with signed a and b; SD scales by |a| and variance by a². Adding a constant leaves dispersion unchanged.

Last updated: October 2026

Measures of Central Tendency

Measures of central tendency identify a single representative central value around which numerical observations cluster. +-----------------------------------------------------------------------------+

  • | MEASURES OF CENTRAL TENDENCY |
  • +-----------------------------------------------------------------------------+
  • | ARITHMETIC MEAN (x̄): Mathematical centroid; sensitive to extreme outliers. |
  • | MEDIAN (M): Positional midpoint; less sensitive to outlier magnitude. |
  • | MODE (Z): Point of maximum frequency density; practical peak. |
  • | EMPIRICAL RULE: Mode approximately 3(Median) - 2(Mean) [empirical estimate] |
  • +-----------------------------------------------------------------------------+
  • 1. Arithmetic Mean ( x ˉ \bar{x} x ˉ )

The arithmetic mean is the quotient of the sum of all observations divided by the total number of observations.

Raw (Ungrouped) Data: x ˉ = ∑ i = 1 n x i n \bar{x} = \frac{\sum_{i=1}^n x_i}{n} x ˉ = n ∑ i = 1 n ​ x i ​ ​

Discrete Frequency Distribution: x ˉ = ∑ i = 1 k f i x i ∑ i = 1 k f i = ∑ f i x i N ( where N = ∑ f i ) \bar{x} = \frac{\sum_{i=1}^k f_i x_i}{\sum_{i=1}^k f_i} = \frac{\sum f_i x_i}{N} \quad (\text{where } N = \sum f_i) x ˉ = ∑ i = 1 k ​ f i ​ ∑ i = 1 k ​ f i ​ x i ​ ​ = N ∑ f i ​ x i ​ ​ ( where N = ∑ f i ​ )

Grouped Continuous Frequency Distribution: In grouped data, each class interval is represented by its class mark (midpoint) x i = Lower limit + Upper limit 2 x_i = \frac{\text{Lower limit} + \text{Upper limit}}{2} x i ​ = 2 Lower limit + Upper limit ​ . Three methods streamline calculation:

Method Formula Operational Application / Advantage

Direct Method x ˉ = ∑ f i x i N \bar{x} = \frac{\sum f_i x_i}{N} x ˉ = N ∑ f i ​ x i ​ ​ Suitable when midpoints x i x_i x i ​ and frequencies f i f_i f i ​ are small integers

Assumed Mean Method x ˉ = A + ∑ f i d i N \bar{x} = A + \frac{\sum f_i d_i}{N} x ˉ = A + N ∑ f i ​ d i ​ ​ Sets arbitrary mean A A A ; deviations d i = x i − A d_i = x_i - A d i ​ = x i ​ − A reduce arithmetic scale

Step-Deviation Method x ˉ = A + h ( ∑ f i u i N ) \bar{x} = A + h \left(\frac{\sum f_i u_i}{N}\right) x ˉ = A + h ( N ∑ f i ​ u i ​ ​ ) Class width h h h ; reduced variable u i = x i − A h u_i = \frac{x_i - A}{h} u i ​ = h x i ​ − A ​ ; eliminates large products

Combined Mean Formula: If two groups contain n 1 n_1 n 1 ​ and n 2 n_2 n 2 ​ observations with respective means x ˉ 1 \bar{x}_1 x ˉ 1 ​ and x ˉ 2 \bar{x}_2 x ˉ 2 ​ , their pooled composite mean is: x ˉ 12 = n 1 x ˉ 1 + n 2 x ˉ 2 n 1 + n 2 \bar{x}_{12} = \frac{n_1 \bar{x}_1 + n_2 \bar{x}_2}{n_1 + n_2} x ˉ 12 ​ = n 1 ​ + n 2 ​ n 1 ​ x ˉ 1 ​ + n 2 ​ x ˉ 2 ​ ​

Note

First Moment Property: The algebraic sum of deviations of all observations from their arithmetic mean is always identically zero: ∑ ( x i − x ˉ ) = 0 \sum (x_i - \bar{x}) = 0 ∑ ( x i ​ − x ˉ ) = 0 . Consequently, ∑ f i ( x i − x ˉ ) = 0 \sum f_i (x_i - \bar{x}) = 0 ∑ f i ​ ( x i ​ − x ˉ ) = 0 .

2. Median ( M M M )

The median is a central value of ordered data: at least half the observations are no greater than it and at least half are no less than it. With ties, there need not be exactly half strictly below or above it.

Ungrouped Data: Arrange n n n values in ascending order:

If n n n is odd : Median = ( n + 1 2 ) -th observation \text{Median} = \left(\frac{n + 1}{2}\right)\text{-th observation} Median = ( 2 n + 1 ​ ) -th observation .

If n n n is even : Median = 1 2 [ ( n 2 ) -th + ( n 2 + 1 ) -th observation ] \text{Median} = \frac{1}{2} \left[ \left(\frac{n}{2}\right)\text{-th} + \left(\frac{n}{2} + 1\right)\text{-th observation} \right] Median = 2 1 ​ [ ( 2 n ​ ) -th + ( 2 n ​ + 1 ) -th observation ] .

Grouped Continuous Distribution:

Construct the cumulative frequency ( C F CF CF ) distribution.

Determine N 2 \frac{N}{2} 2 N ​ , where N = ∑ f i N = \sum f_i N = ∑ f i ​ .

Locate the median class : the class interval whose cumulative frequency just exceeds or equals N 2 \frac{N}{2} 2 N ​ .

Apply the interpolation formula: M = L + ( N 2 − C F f ) × h M = L + \left( \frac{\frac{N}{2} - CF}{f} \right) \times h M = L + ( f 2 N ​ − CF ​ ) × h

Where:

L = Lower limit of the median class L = \text{Lower limit of the median class} L = Lower limit of the median class

N = Total frequency ( ∑ f i ) N = \text{Total frequency } (\sum f_i) N = Total frequency ( ∑ f i ​ )

C F = Cumulative frequency of the class immediately PRECEDING the median class CF = \text{Cumulative frequency of the class immediately PRECEDING the median class} CF = Cumulative frequency of the class immediately PRECEDING the median class

f = Simple frequency of the median class itself f = \text{Simple frequency of the median class itself} f = Simple frequency of the median class itself

h = Class width of the median class h = \text{Class width of the median class} h = Class width of the median class

3. Mode ( Z Z Z )

The mode is the value that occurs with the highest frequency in a dataset.

Grouped Continuous Distribution:

Locate the modal class : the class interval possessing the highest frequency ( f 1 f_1 f 1 ​ ).

Apply the modal formula: Mode = L + ( f 1 − f 0 2 f 1 − f 0 − f 2 ) × h \text{Mode} = L + \left( \frac{f_1 - f_0}{2f_1 - f_0 - f_2} \right) \times h Mode = L + ( 2 f 1 ​ − f 0 ​ − f 2 ​ f 1 ​ − f 0 ​ ​ ) × h

Where:

L = Lower limit of the modal class L = \text{Lower limit of the modal class} L = Lower limit of the modal class

f 1 = Frequency of the modal class f_1 = \text{Frequency of the modal class} f 1 ​ = Frequency of the modal class

f 0 = Frequency of the class immediately PRECEDING the modal class f_0 = \text{Frequency of the class immediately PRECEDING the modal class} f 0 ​ = Frequency of the class immediately PRECEDING the modal class

f 2 = Frequency of the class immediately SUCCEEDING the modal class f_2 = \text{Frequency of the class immediately SUCCEEDING the modal class} f 2 ​ = Frequency of the class immediately SUCCEEDING the modal class

h = Class width of the modal class h = \text{Class width of the modal class} h = Class width of the modal class

4. Karl Pearson's Empirical Skewness Relationship

For moderately asymmetrical (unimodal) frequency distributions, the three central tendencies can approximately satisfy the empirical relationship: Mode ≈ 3 Median − 2 Mean \text{Mode} \approx 3\text{Median} - 2\text{Mean} Mode ≈ 3 Median − 2 Mean

Alternative algebraic expressions useful for rapid CBT substitutions:

Mean − Mode ≈ 3 ( Mean − Median ) \text{Mean} - \text{Mode} \approx 3(\text{Mean} - \text{Median}) Mean − Mode ≈ 3 ( Mean − Median )

Median ≈ 1 3 Mode + 2 3 Mean \text{Median} \approx \frac{1}{3}\text{Mode} + \frac{2}{3}\text{Mean} Median ≈ 3 1 ​ Mode + 3 2 ​ Mean Symmetric unimodal examples: Mean = Median = Mode

  • Typical unimodal right-tail examples: Mean > Median > Mode (not universal)
  • Typical unimodal left-tail examples: Mode > Median > Mean (not universal)
  • Measures of Dispersion (Spread)

Central tendency describes the location of data; dispersion measures the degree of scatter or variability of individual values around the central point.

  • Absolute measure Relative measure or unit qualification
  • Range Coefficient of range divides range by maximum plus minimum, when meaningful and nonzero

Mean absolute deviation A relative coefficient divides by the chosen central value, when meaningful and nonzero

  • Variance Squared data units; it is not a dimensionless measure
  • Standard deviation Original data units; CV divides SD by a meaningful positive mean and expresses a percentage
  • 1. Range & Coefficient of Range

Absolute Range: Difference between extreme values: Range = X max ⁡ − X min ⁡ \text{Range} = X_{\max} - X_{\min} Range = X m a x ​ − X m i n ​

Coefficient of Range (Relative): Coefficient of Range = X max ⁡ − X min ⁡ X max ⁡ + X min ⁡ \text{Coefficient of Range} = \frac{X_{\max} - X_{\min}}{X_{\max} + X_{\min}} Coefficient of Range = X m a x ​ + X m i n ​ X m a x ​ − X m i n ​ ​

2. Mean Deviation ( M D MD M D )

The arithmetic average of the absolute deviations taken from a central value (mean or median):

About Mean ( x ˉ \bar{x} x ˉ ): M D ( x ˉ ) = ∑ i = 1 n ∣ x i − x ˉ ∣ n = ∑ f i ∣ x i − x ˉ ∣ N MD(\bar{x}) = \frac{\sum_{i=1}^n |x_i - \bar{x}|}{n} = \frac{\sum f_i |x_i - \bar{x}|}{N} M D ( x ˉ ) = n ∑ i = 1 n ​ ∣ x i ​ − x ˉ ∣ ​ = N ∑ f i ​ ∣ x i ​ − x ˉ ∣ ​

About Median ( M M M ): M D ( M ) = ∑ i = 1 n ∣ x i − M ∣ n = ∑ f i ∣ x i − M ∣ N MD(M) = \frac{\sum_{i=1}^n |x_i - M|}{n} = \frac{\sum f_i |x_i - M|}{N} M D ( M ) = n ∑ i = 1 n ​ ∣ x i ​ − M ∣ ​ = N ∑ f i ​ ∣ x i ​ − M ∣ ​

Important

Minimal Property of Mean Deviation: The sum of absolute deviations ∑ ∣ x i − A ∣ \sum |x_i - A| ∑ ∣ x i ​ − A ∣ is minimum when deviations are taken about the Median ( A = M A = M A = M ). Hence, M D ( M ) ≤ M D ( x ˉ ) MD(M) \le MD(\bar{x}) M D ( M ) ≤ M D ( x ˉ ) .

3. Variance ( σ 2 \sigma^2 σ 2 ) and Standard Deviation ( σ \sigma σ )

Standard deviation is the nonnegative square root of the arithmetic mean of squared deviations taken from the arithmetic mean (the second central moment).

Variance Formula for Raw Data: σ 2 = ∑ i = 1 n ( x i − x ˉ ) 2 n = ∑ x i 2 n − ( x ˉ ) 2 \sigma^2 = \frac{\sum_{i=1}^n (x_i - \bar{x})^2}{n} = \frac{\sum x_i^2}{n} - (\bar{x})^2 σ 2 = n ∑ i = 1 n ​ ( x i ​ − x ˉ ) 2 ​ = n ∑ x i 2 ​ ​ − ( x ˉ ) 2

Grouped Continuous Data (Shortcut Method): σ = ∑ f i d i 2 N − ( ∑ f i d i N ) 2 × h ( where d i = x i − A h ) \sigma = \sqrt{ \frac{\sum f_i d_i^2}{N} - \left( \frac{\sum f_i d_i}{N} \right)^2 } \times h \quad \left( \text{where } d_i = \frac{x_i - A}{h} \right) σ = N ∑ f i ​ d i 2 ​ ​ − ( N ∑ f i ​ d i ​ ​ ) 2 ​ × h ( where d i ​ = h x i ​ − A ​ )

  • Standard Deviation ( σ \sigma σ ): σ = σ 2 \sigma = \sqrt{\sigma^2} σ = σ 2 ​
  • 4. Coefficient of Variation ( C V CV C V )

Developed by Karl Pearson, the Coefficient of Variation expresses dispersion as a percentage of the mean: C V = σ x ˉ × 100 % CV = \frac{\sigma}{\bar{x}} \times 100\% C V = x ˉ σ ​ × 100%

Consistency Rule: When comparing two series (e.g., punctuality of two railway divisions):

Lower C V ⟹ CV \implies C V ⟹ Higher consistency, greater uniformity, more stable operation.

Higher C V ⟹ CV \implies C V ⟹ Greater variability, less consistency.

Mathematical Transformations: Effects of Shifting & Scaling

Examinees frequently encounter questions where every observation in a dataset undergoes a linear algebraic transformation y i = a ⋅ x i + b y_i = a \cdot x_i + b y i ​ = a ⋅ x i ​ + b , where b b b represents a change of origin (shift) and a a a represents a change of scale (multiplication).

Statistical Parameter Original Data ( x i x_i x i ​ ) Shifted Data ( x i + b x_i + b x i ​ + b ) Scaled Data ( a ⋅ x i a \cdot x_i a ⋅ x i ​ ) Combined Linear Transform ( a x i + b a x_i + b a x i ​ + b )

Mean ( x ˉ \bar{x} x ˉ ) x ˉ \bar{x} x ˉ x ˉ + b \bar{x} + b x ˉ + b a x ˉ a \bar{x} a x ˉ a x ˉ + b a \bar{x} + b a x ˉ + b

  • Median ( M M M ) M M M M + b M + b M + b a M a M a M a M + b a M + b a M + b
  • Mode ( Z Z Z ) Z Z Z Z + b Z + b Z + b a Z a Z a Z a Z + b a Z + b a Z + b
  • Range ( R R R ) R R R R R R (Unchanged!) ∣ a ∣ R \lvert a \rvert R ∣ a ∣ R ∣ a ∣ R \lvert a \rvert R ∣ a ∣ R

Mean Deviation ( M D MD M D ) M D MD M D M D MD M D (Unchanged!) ∣ a ∣ M D \lvert a \rvert MD ∣ a ∣ M D ∣ a ∣ M D \lvert a \rvert MD ∣ a ∣ M D

Standard Deviation ( σ \sigma σ ) σ \sigma σ σ \sigma σ (Unchanged!) ∣ a ∣ σ \lvert a \rvert \sigma ∣ a ∣ σ ∣ a ∣ σ \lvert a \rvert \sigma ∣ a ∣ σ

Variance ( σ 2 \sigma^2 σ 2 ) σ 2 \sigma^2 σ 2 σ 2 \sigma^2 σ 2 (Unchanged!) a 2 σ 2 a^2 \sigma^2 a 2 σ 2 a 2 σ 2 a^2 \sigma^2 a 2 σ 2

Warning

The Shift-Invariance Trap: Adding or subtracting an arbitrary constant k k k shifts the mean, median, and mode by exactly k k k . However, the distances between points remain completely unaltered! Therefore, Range, Mean Deviation, Variance, and Standard Deviation are completely unaffected by addition or subtraction of a constant .

  • Worked Examples
  • Worked Example 1: Grouped Data Median and Mode of Sectional Running Speeds

Problem: A Section Controller tabulates the recorded operational speeds (in km/h) of 50 freight trains traversing a critical junction section:

  • Speed Interval (km/h) Number of Trains ( f i f_i f i ​ )
  • 10 – 20 5
  • 20 – 30 8
  • 30 – 40 15
  • 40 – 50 12
  • 50 – 60 10

Calculate: (a) The Median speed, and (b) The Modal speed.

Step 1: Compute Cumulative Frequencies ( C F CF CF ):

  • 10 − 20 : f = 5 , C F = 5 10-20: f = 5, CF = 5 10 − 20 : f = 5 , CF = 5
  • 20 − 30 : f = 8 , C F = 5 + 8 = 13 20-30: f = 8, CF = 5 + 8 = 13 20 − 30 : f = 8 , CF = 5 + 8 = 13
  • 30 − 40 : f = 15 , C F = 13 + 15 = 28 30-40: f = 15, CF = 13 + 15 = 28 30 − 40 : f = 15 , CF = 13 + 15 = 28
  • 40 − 50 : f = 12 , C F = 28 + 12 = 40 40-50: f = 12, CF = 28 + 12 = 40 40 − 50 : f = 12 , CF = 28 + 12 = 40

50 − 60 : f = 10 , C F = 40 + 10 = 50 50-60: f = 10, CF = 40 + 10 = 50 50 − 60 : f = 10 , CF = 40 + 10 = 50 Total frequency N = 50 N = 50 N = 50 .

Step 2: Calculate Median ( M M M ):

Half-count: N 2 = 50 2 = 25 \frac{N}{2} = \frac{50}{2} = 25 2 N ​ = 2 50 ​ = 25 .

The cumulative frequency just exceeding 25 is 28, corresponding to the class 30 – 40 .

Parameter values: L = 30 , C F = 13 , f = 15 , h = 10 L = 30, CF = 13, f = 15, h = 10 L = 30 , CF = 13 , f = 15 , h = 10 .

Substitute into the median interpolation formula: M = L + ( N 2 − C F f ) h = 30 + ( 25 − 13 15 ) × 10 = 30 + ( 12 15 ) × 10 M = L + \left( \frac{\frac{N}{2} - CF}{f} \right) h = 30 + \left( \frac{25 - 13}{15} \right) \times 10 = 30 + \left( \frac{12}{15} \right) \times 10 M = L + ( f 2 N ​ − CF ​ ) h = 30 + ( 15 25 − 13 ​ ) × 10 = 30 + ( 15 12 ​ ) × 10 M = 30 + 0.8 × 10 = 30 + 8 = 38.00 km/h M = 30 + 0.8 \times 10 = 30 + 8 = 38.00 \text{ km/h} M = 30 + 0.8 × 10 = 30 + 8 = 38.00 km/h

Step 3: Calculate Mode ( Z Z Z ):

Highest frequency is f 1 = 15 f_1 = 15 f 1 ​ = 15 , situated in class 30 – 40 .

Preceding frequency f 0 = 8 f_0 = 8 f 0 ​ = 8 ; Succeeding frequency f 2 = 12 f_2 = 12 f 2 ​ = 12 ; Lower limit L = 30 L = 30 L = 30 ; Class width h = 10 h = 10 h = 10 .

Substitute into the mode formula: Mode = L + ( f 1 − f 0 2 f 1 − f 0 − f 2 ) h = 30 + ( 15 − 8 2 ( 15 ) − 8 − 12 ) × 10 \text{Mode} = L + \left( \frac{f_1 - f_0}{2f_1 - f_0 - f_2} \right) h = 30 + \left( \frac{15 - 8}{2(15) - 8 - 12} \right) \times 10 Mode = L + ( 2 f 1 ​ − f 0 ​ − f 2 ​ f 1 ​ − f 0 ​ ​ ) h = 30 + ( 2 ( 15 ) − 8 − 12 15 − 8 ​ ) × 10 Mode = 30 + ( 7 30 − 20 ) × 10 = 30 + ( 7 10 ) × 10 = 30 + 7 = 37.00 km/h \text{Mode} = 30 + \left( \frac{7}{30 - 20} \right) \times 10 = 30 + \left( \frac{7}{10} \right) \times 10 = 30 + 7 = 37.00 \text{ km/h} Mode = 30 + ( 30 − 20 7 ​ ) × 10 = 30 + ( 10 7 ​ ) × 10 = 30 + 7 = 37.00 km/h

Conclusion: The grouped-data estimates are median 38.00 km/h and mode 37.00 km/h ; they do not recover the exact original observations.

Worked Example 2: Karl Pearson's Empirical Rule and Composite Means

Problem: In one fictional running-time dataset, the mean running time is 54.00 54.00 54.00 minutes and the median running time is 51.00 51.00 51.00 minutes. Using Pearson's empirical formula, estimate the mode. In a separate pooling exercise, if Division X ( n 1 = 30 n_1 = 30 n 1 ​ = 30 trains, x ˉ 1 = 60 \bar{x}_1 = 60 x ˉ 1 ​ = 60 minutes) merges operations with Division Y ( n 2 = 20 n_2 = 20 n 2 ​ = 20 trains, x ˉ 2 = 75 \bar{x}_2 = 75 x ˉ 2 ​ = 75 minutes), find the aggregate combined mean.

Step 1: Estimate Mode using Pearson's empirical formula: Mode ≈ 3 Median − 2 Mean \text{Mode} \approx 3\text{Median} - 2\text{Mean} Mode ≈ 3 Median − 2 Mean Mode = 3 ( 51.00 ) − 2 ( 54.00 ) = 153.00 − 108.00 = 45.00 minutes \text{Mode} = 3(51.00) - 2(54.00) = 153.00 - 108.00 = 45.00 \text{ minutes} Mode = 3 ( 51.00 ) − 2 ( 54.00 ) = 153.00 − 108.00 = 45.00 minutes

Step 2: Calculate Combined Mean for merged divisions: x ˉ 12 = n 1 x ˉ 1 + n 2 x ˉ 2 n 1 + n 2 = 30 ( 60 ) + 20 ( 75 ) 30 + 20 \bar{x}_{12} = \frac{n_1 \bar{x}_1 + n_2 \bar{x}_2}{n_1 + n_2} = \frac{30(60) + 20(75)}{30 + 20} x ˉ 12 ​ = n 1 ​ + n 2 ​ n 1 ​ x ˉ 1 ​ + n 2 ​ x ˉ 2 ​ ​ = 30 + 20 30 ( 60 ) + 20 ( 75 ) ​ x ˉ 12 = 1800 + 1500 50 = 3300 50 = 66.00 minutes \bar{x}_{12} = \frac{1800 + 1500}{50} = \frac{3300}{50} = 66.00 \text{ minutes} x ˉ 12 ​ = 50 1800 + 1500 ​ = 50 3300 ​ = 66.00 minutes

Conclusion: The estimated mode is 45.00 minutes and the combined mean is 66.00 minutes .

Worked Example 3: Effect of Linear Transformation on Variance and Standard Deviation

Problem: A sample of 12 block section track occupancy times has a mean x ˉ = 25.0 \bar{x} = 25.0 x ˉ = 25.0 minutes, a standard deviation σ = 4.0 \sigma = 4.0 σ = 4.0 minutes, and a variance σ 2 = 16.0 minutes 2 \sigma^2 = 16.0 \text{ minutes}^2 σ 2 = 16.0 minutes 2 . For a mathematical exercise, transform each recorded value by the algebraic rule: y i = 3 x i − 10 y_i = 3x_i - 10 y i ​ = 3 x i ​ − 10

Determine the new mean ( y ˉ \bar{y} y ˉ ​ ), new standard deviation ( σ y \sigma_y σ y ​ ), new variance ( σ y 2 \sigma_y^2 σ y 2 ​ ), and the new coefficient of variation ( C V y CV_y C V y ​ ).

Step 1: Compute New Mean ( y ˉ \bar{y} y ˉ ​ ): y ˉ = 3 x ˉ − 10 = 3 ( 25.0 ) − 10 = 75.0 − 10 = 65.0 minutes \bar{y} = 3\bar{x} - 10 = 3(25.0) - 10 = 75.0 - 10 = 65.0 \text{ minutes} y ˉ ​ = 3 x ˉ − 10 = 3 ( 25.0 ) − 10 = 75.0 − 10 = 65.0 minutes

Step 2: Compute New Standard Deviation ( σ y \sigma_y σ y ​ ): Origin shift ( − 10 -10 − 10 ) has zero effect on dispersion. Scale factor is a = 3 a = 3 a = 3 . σ y = ∣ a ∣ × σ x = 3 × 4.0 = 12.0 minutes \sigma_y = |a| \times \sigma_x = 3 \times 4.0 = 12.0 \text{ minutes} σ y ​ = ∣ a ∣ × σ x ​ = 3 × 4.0 = 12.0 minutes

Step 3: Compute New Variance ( σ y 2 \sigma_y^2 σ y 2 ​ ): σ y 2 = a 2 × σ x 2 = 3 2 × 16.0 = 9 × 16.0 = 144.0 minutes 2 \sigma_y^2 = a^2 \times \sigma_x^2 = 3^2 \times 16.0 = 9 \times 16.0 = 144.0 \text{ minutes}^2 σ y 2 ​ = a 2 × σ x 2 ​ = 3 2 × 16.0 = 9 × 16.0 = 144.0 minutes 2

(Check: σ y 2 = 12.0 2 = 144.0 \sigma_y^2 = 12.0^2 = 144.0 σ y 2 ​ = 12. 0 2 = 144.0 .)

Step 4: Compute New Coefficient of Variation ( C V y CV_y C V y ​ ): C V y = σ y y ˉ × 100 % = 12.0 65.0 × 100 % = 1200 65 ≈ 18.46 % CV_y = \frac{\sigma_y}{\bar{y}} \times 100\% = \frac{12.0}{65.0} \times 100\% = \frac{1200}{65} \approx 18.46\% C V y ​ = y ˉ ​ σ y ​ ​ × 100% = 65.0 12.0 ​ × 100% = 65 1200 ​ ≈ 18.46%

Conclusion: y ˉ = 65.0 min \bar{y} = 65.0 \text{ min} y ˉ ​ = 65.0 min , σ y = 12.0 min \sigma_y = 12.0 \text{ min} σ y ​ = 12.0 min , σ y 2 = 144.0 min 2 \sigma_y^2 = 144.0 \text{ min}^2 σ y 2 ​ = 144.0 min 2 , and C V y ≈ 18.46 % CV_y \approx 18.46\% C V y ​ ≈ 18.46% .

Grouped mean and median/mode interpolation are estimates based on class information, not the exact original observations. The displayed grouped mode formula assumes equal-width continuous classes and an appropriate modal class. Pearson’s empirical relation and familiar mean–median–mode orderings are approximations for suitable unimodal distributions, not universal identities. CV comparisons require a meaningful positive ratio-scale mean; a zero or negative mean makes the usual interpretation unsuitable. The displayed variance divides by N for the described population; an unbiased sample variance uses n - 1.