Study guide
2.5 The Instrument Flight Deck Check & Flight Control Verification
FAA Instrument Rating - Airplane IRA
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Introduction & Instrument Rating Requirements
1.1 About the FAA Instrument Rating Knowledge Test 1.2 Aeronautical Experience & Certification Requirements 1.3 Instrument Recency & Currency Requirements
2 Chapter 2: IFR Preflight & Aircraft Equipment Requirements
2.1 14 CFR 91.205 Required IFR Instruments & Equipment 2.2 Inoperative Equipment, MELs & 14 CFR 91.213 2.3 Required Aircraft Inspections & Maintenance Records 2.4 VOR Equipment Accuracy Checks (14 CFR 91.171) 2.5 The Instrument Flight Deck Check & Flight Control Verification
3 Chapter 3: Pitot-Static, Gyroscopic & Magnetic Flight Instruments
3.1 Pitot-Static System Mechanics & Errors 3.2 Gyroscopic Instruments & Principles 3.3 Magnetic Compass Mechanics & Errors 3.4 Alternate Static Source & Instrument Malfunctions
4 Chapter 4: Electronic Flight Displays, AHRS & Automation
4.1 Electronic Flight Displays (PFD/MFD) & System Architecture 4.2 AHRS, ADC & Magnetometer Operation 4.3 Autopilot, Flight Director & Automation Management
5 Chapter 5: Attitude Instrument Flying & Partial-Panel Operations
5.1 Concept of Attitude Instrument Flying & Scanning Techniques 5.2 Pitch, Bank & Power Instrument Interpretation 5.3 Unusual Attitude Recoveries 5.4 Partial-Panel Instrument Flight & Systems Failures
6 Chapter 6: Aviation Meteorology & Atmospheric Hazards
6.1 Atmospheric Fundamentals, Pressure & Stability 6.2 Air Masses, Fronts & Frontal Weather 6.3 Structural & Induction Icing 6.4 Thunderstorms, Turbulence & Low-Level Wind Shear
7 Chapter 7: Aviation Weather Reports, Forecasts & Analysis Charts
7.1 Aviation Routine Weather Reports (METAR) & SPECI 7.2 Terminal Aerodrome Forecasts (TAF) & Aviation Forecasts 7.3 In-Flight Weather Advisories: AIRMETs, SIGMETs & PIREPs 7.4 Aviation Weather Charts & Graphic Products
8 Chapter 8: Ground-Based Navigation Systems
8.1 VOR Navigation Principles & Service Volumes 8.2 VOR Intercepting, Tracking & Radial Orientation 8.3 Distance Measuring Equipment (DME) Principles 8.4 Instrument Landing System (ILS) Ground Components
9 Chapter 9: Space-Based Navigation, GPS & RNAV Operations
9.1 Global Positioning System (GPS) Architecture & RAIM 9.2 Wide Area Augmentation System (WAAS) & SBAS 9.3 Area Navigation (RNAV) & Required Navigation Performance (RNP) 9.4 IFR Flight with GPS & Database Currency
10 Chapter 10: IFR En Route Charts, Airspace & Altitudes
10.1 IFR Low Altitude En Route Charts & Symbology 10.2 IFR Altitudes: MEA, MOCA, MAA, MRA, MCA & OROCA 10.3 Airspace Classification & IFR Operating Rules 10.4 IFR Cruising Altitudes & Oxygen Requirements
11 Chapter 11: ATC Clearances, Procedures & Lost Communications
11.1 IFR Flight Plan Filing & Activation 11.2 CRAFT Clearances & Departure Instructions 11.3 Mandatory IFR Position Reports & ATC Communications 11.4 14 CFR 91.185 Lost Communications Procedures 11.5 14 CFR 91.167 Fuel Requirements, Preferred Routes & Flight Planning Calculations
12 Chapter 12: IFR Departures, Arrival Procedures & Holding
12.1 Obstacle Departure Procedures (ODP) & Standard Instrument Departures (SID) 12.2 Standard Terminal Arrival Routes (STAR) 12.3 Holding Pattern Geometry, Speeds & Wind Drift Correction 12.4 Holding Pattern Entry Procedures: Direct, Teardrop & Parallel
13 Chapter 13: Instrument Approach Procedures & Navigation Profiles
13.1 Instrument Approach Plate Anatomy & Briefing 13.2 Precision Approaches: ILS Categories & Profiles 13.3 Non-Precision Approaches: VOR, LOC, RNAV (LNAV/LP) 13.4 APV Approaches: LPV, LNAV/VNAV & Baro-VNAV
14 Chapter 14: Approach Minimums, Landing Criteria & Missed Approaches
14.1 Visual Descent Point (VDP) & Circling Approaches 14.2 14 CFR 91.175 Landing Minimums & Visual References 14.3 Missed Approach Procedures & Rejected Landings 14.4 Engine-Inoperative Instrument Flight & Approaches (AMEL/AMES)
2.5 The Instrument Flight Deck Check & Flight Control Verification
Key Takeaways Explain This Topic AI
The purpose of the instrument flight deck check is to prove — on the ground, where a defect is free — that every instrument, avionics box, and flight control required for IFR is present, operative, and accurate, because in IMC there is no outside reference to catch a lying instrument.
Each pitot-static and gyroscopic instrument has a known 'rest' indication before taxi: airspeed at zero, vertical speed at zero (note any built-in offset), altimeter within plus or minus 75 feet of surveyed field elevation with the local setting, attitude indicator erect, heading indicator free and set to the magnetic compass, ball centered, and the compass bowl full of fluid with a legible correction card.
After engine start, suction or pressure must read within the POH range (typically 4.5 to 5.5 in Hg), the ammeter must show a charging alternator, the low-vacuum and low-voltage annunciators must extinguish, and glass-cockpit AHRS/ADC units must complete alignment with no red X remaining on the PFD.
The taxi check is the highest-value item on the list: in a left turn the turn coordinator's miniature aircraft banks left while the ball swings right (to the outside), the heading indicator decreases and agrees with the magnetic compass, the attitude indicator stays erect within roughly 5 degrees, and the airspeed indicator, altimeter, and vertical speed indicator do not move.
Flight control verification is part of the same check: controls free and correct through full travel, trim set for takeoff, and — for autopilot-equipped aircraft — the preflight self-test plus a deliberate check that the autopilot disconnect switch and the electric trim interrupt actually kill the servos.
Last updated: August 2026
The Instrument Flight Deck Check & Flight Control Verification
Quick Answer: The instrument flight deck check exists to detect defects on the ground, where they cost nothing. Its four stages are (1) a pre-start documents, publications, and panel review; (2) a post-start power-source check — suction 4.5 to 5.5 in Hg, ammeter charging, annunciators out, AHRS/ADC aligned with no red X; (3) the taxi check , where a turn to the left must produce a left-banking turn coordinator with the ball to the right , a decreasing heading indicator that agrees with the magnetic compass, an erect attitude indicator, and motionless airspeed, altimeter, and vertical speed indications; and (4) a before-takeoff sweep of instrument settings, navigation sources, and flight controls free and correct with trim set and the autopilot disconnect verified.
Every other regulation in this chapter — 14 CFR § 91.205, § 91.213, § 91.411, § 91.171 — establishes what must be installed and inspected . The instrument flight deck check answers a different question: is it actually working right now, in this airplane, on this day? Once an aircraft enters cloud, the pilot has no external reference against which to test an instrument. A slowly precessing heading indicator, a vertical speed indicator that rests 200 feet per minute low, or an attitude indicator that never fully erected are all trivially detectable on the ramp and potentially fatal in IMC.
- Stage 1: Pre-Start Cockpit Review
- Paperwork and Publications
Item What to Verify
Aircraft documents (ARROW) Airworthiness certificate, Registration, Radio station license (international only), Operating limitations/POH, Weight and balance
Inspection status (AVIATES) ADs, VOR check within the preceding 30 days, Annual/100-hour, Altimeter and static system within 24 calendar months, Transponder within 24 calendar months, ELT
VOR accuracy log The 14 CFR § 91.171(d) entry with Date, Place, Bearing error, and Signature is physically present, not merely remembered
Navigation database Panel-mount navigator and EFB show a current 28-day AIRAC cycle covering the route; expired databases prohibit flying instrument approach procedures
Charts Current en route chart, Terminal Procedures Publication or app coverage for destination and every candidate alternate
Panel Walk (Left to Right)
Every instrument has a correct rest indication before the engine turns:
Airspeed Indicator: Needle at or near zero, glass intact, markings legible.
Attitude Indicator: Miniature aircraft adjustable, no obvious tilt, case secure.
Altimeter: With the current local setting in the Kollsman window, the altimeter must indicate within ±75 feet of the surveyed field elevation . A larger error means the altimeter is questionable for IFR.
Turn Coordinator: OFF flag in view (electrically powered, engine not running), inclinometer fluid full, ball centered on a level ramp.
Heading Indicator: Card free to rotate with the caging/adjust knob, no obvious binding.
Vertical Speed Indicator: Reads zero — or note the exact standing offset, because that offset must be applied to every in-flight reading.
Magnetic Compass: Bowl full of fluid with no bubbles , card swings freely, and a legible compass correction card is installed.
Clock: Installed, running, and displaying seconds, as required by 14 CFR § 91.205(d)(6).
Alternate static source: Valve accessible from the seated position and the POH correction table located.
Stage 2: After Engine Start — Power Sources and Avionics
This is where the two independent power supplies that keep an instrument panel alive get tested.
Check Correct Indication What a Failure Means
Suction / pressure gauge Within POH range, typically 4.5 to 5.5 in Hg at run-up RPM Low suction means the attitude and heading indicators will degrade slowly and without a flag
Ammeter / loadmeter Positive charge after start; deflects when pitot heat, landing light, or strobes are switched on A dead alternator makes the electrically driven turn coordinator and all avionics a battery-life countdown
Annunciator panel Low-vacuum and low-voltage lights illuminate at start, then extinguish A caution that never goes out is a no-go item, not a nuisance light
Gyro erection Attitude and heading indicators stable and erect within a few minutes A gyro that never fully erects, wanders, or precesses rapidly is unserviceable
Pitot heat Distinct ammeter/loadmeter current rise (typically 5 to 10 amps) No current rise means a burned-out element and no ice protection for the pitot tube
AHRS / ADC (glass panels) Alignment completes; every red X clears from the PFD A persistent red X over the attitude, airspeed, or heading field grounds the aircraft for IFR
Avionics and audio Comm and nav radios pass self-test, marker beacon test tone audible, audio panel selects each source An unidentified navaid or a dead audio panel makes approach identification impossible
Transponder / ADS-B Mode C/S and ADS-B Out report no fault; correct code entered Required by 14 CFR § 91.215 and § 91.225 for most controlled airspace
Note
Set the altimeter from a current source. Take the setting from ATIS, AWOS, ASOS, or clearance delivery — not from yesterday's value or from field elevation guessing. The ±75-foot tolerance is only meaningful when the setting itself is current.
Stage 3: The Taxi Check (The Highest-Value Item)
Taxiing is the only opportunity to make the airplane turn on a known heading, at a known rate, with the ground visible. Announce it out loud — "turning left" and "turning right" — and check five instruments each way. +-----------------------------------------------------------------------------+
- | TAXI CHECK: TURNING LEFT (Northern Hemisphere) |
- | |
- | INSTRUMENT CORRECT INDICATION |
- | -------------------------------------------------------------------- |
- | Turn Coordinator Miniature aircraft BANKS LEFT |
- | Inclinometer (Ball) Ball swings RIGHT (to the OUTSIDE of the turn) |
- | Heading Indicator Heading DECREASES and agrees with the compass |
- | Magnetic Compass Card swings freely, indicates a LEFT turn |
- | Attitude Indicator Stays ERECT (no more than about 5 deg of error) |
- | Airspeed Indicator Remains at ZERO |
- | Altimeter Steady at field elevation |
- | Vertical Speed Remains at ZERO |
- +-----------------------------------------------------------------------------+
- Why the Ball Goes to the Outside
During a ground turn there is no bank and therefore no horizontal component of lift to balance centrifugal force. The ball is thrown to the outside of the turn — right ball in a left turn, left ball in a right turn. This is the reverse of a coordinated turn in flight and is exactly the indication the FAA expects a candidate to name.
Comparing Heading Indicator to Magnetic Compass
Set the heading indicator to the magnetic compass while stopped and straight, then confirm during the turn that both move in the same direction and arrive at approximately the same heading. A heading indicator that lags, sticks, or spins is a vacuum or gyro problem; a compass that sticks or reads backward is a fluid or magnetization problem.
- Stage 4: Run-Up, Flight Controls, and Before Takeoff
- Flight Control Systems
The ACS treats flight control systems as instrument-flight knowledge in its own right, because an out-of-trim or restricted control system in IMC destroys the pilot's ability to fly precisely.
Controls free and correct through full travel in all three axes — visually confirm the surfaces move in the correct direction, not just that the yoke moves.
Trim set to the takeoff position for the loaded center of gravity; verify the trim indicator and the physical trim tab agree.
Electric trim runs at the expected rate in both directions and stops instantly when the trim interrupt is pressed.
Autopilot preflight test completes without fault; then verify the AP disconnect on the yoke actually releases the servos. An autopilot that cannot be switched off is a hazard, not a workload reducer.
Flap operation symmetric and full travel, with the indicator matching the actual setting.
Final Instrument Sweep Before Takeoff
Heading indicator aligned with the magnetic compass and cross-checked against the assigned runway heading.
Attitude indicator erect and level with the miniature aircraft set for the seated eye position.
Altimeter on the current setting; note field elevation for the departure.
Navigation sources tuned, identified by Morse code , correct CDI source selected, and the approach or departure procedure loaded.
Clock or timer available for the departure and any timed procedure.
Transponder to ALT and ADS-B active.
Detecting Defects: The Underlying Skill
A checklist tells a pilot what to look at; the instrument flight deck check is about knowing what right looks like so the wrong thing announces itself:
Cross-check redundant sources. Standby attitude indicator against the PFD; heading indicator against the magnetic compass; GPS groundspeed against airspeed and known wind.
Distrust "it will settle in flight." Gyros that are slow to erect, needles that hang, and annunciators that flicker do not fix themselves in cloud.
Treat any red X, flag, or failed self-test as a 14 CFR § 91.213 decision , not a judgment call about how far the flight is going.
Log what you find. A discrepancy noticed and not written up is a discrepancy the next pilot will discover in IMC.