Study guide

8.3 Interpreting Fire Department Data, Charts & Tables

National Firefighter Selection Inventory NFSI

Track your progress as you read

Finished sections get a check mark.

1 Introduction & NFSI Exam Overview

1.1 About the NFSI Exam & Cognitive Abilities 1.2 Exam Format, Scoring & No-Calculator Policy 1.3 Recommended Study Strategy & Pacing Plan

2 Chapter 2: Verbal Comprehension

2.1 Passages, Directives & Policy Reading 2.2 Finding Main Ideas & Core Messages 2.3 Drawing Supported Logical Conclusions

3 Chapter 3: Verbal Expression & Report Writing

3.1 Grammar & Spelling in Incident Reports 3.2 Professional Vocabulary & Word Choice 3.3 Sentence Construction & Punctuation

4 Chapter 4: Problem Sensitivity & Hazard Recognition

4.1 Recognizing Hazards & Critical Problems 4.2 Distinguishing Root Causes from Symptoms 4.3 Incident Severity & Emergency Classification

5 Chapter 5: Deductive Reasoning & Rule Application

5.1 Applying Standard Operating Procedures (SOPs) 5.2 IF-THEN Logic & Conditional Reasoning 5.3 Multi-Rule Scenario Analysis

6 Chapter 6: Inductive Reasoning & Trend Analysis

6.1 Pattern, Sequence & Series Identification 6.2 Inferring Trends & Cause-and-Effect Relationships 6.3 Analogies & Comparative Problem Solving

7 Chapter 7: Information Ordering & Incident Sequencing

7.1 Tactical Action Steps & Procedural Flow 7.2 Dispatch Call Priority & Emergency Triage 7.3 Chronological Event Reconstruction

8 Chapter 8: Mathematical Reasoning & Word Problems

8.1 Firefighting Applied Word Problems 8.2 Flow Rates, Friction Loss & Pump Calculations 8.3 Interpreting Fire Department Data, Charts & Tables

9 Chapter 9: Numeric Facilitation (Number Facility) & Mental Arithmetic

9.1 Fast Mental Arithmetic with Whole Numbers 9.2 Fractions, Decimals & Percent Calculations 9.3 Ratios, Averages, Area & Volume Measurements

10 Chapter 10: Behavioral Orientation & Test Day Strategy

10.1 The 50-Item Behavioral Orientation Scale 10.2 Time Management & 105-Question Pacing 10.3 Test Day Logistics, Scratch Paper & Final Checklist

8.3 Interpreting Fire Department Data, Charts & Tables

Key Takeaways Explain This Topic AI

NFSI table interpretation questions require precise alignment between row headers, column titles, and specific incident categories.

Average response times must be calculated by summing all individual time intervals and dividing by the total number of recorded incidents.

Percentage of total call volume is determined by dividing specific incident category counts by total overall calls.

Percentage change between annual reporting periods is calculated using the formula: ((New Value - Old Value) / Old Value) * 100%.

Systematic cross-referencing and scratchwork verification eliminate common distractor options caused by reading adjacent data rows.

Last updated: July 2026

8.3 Interpreting Fire Department Data, Charts & Tables

Modern fire service management relies heavily on data collection. Firefighters and officers document response times, incident types, staffing rosters, and equipment usage logs. On the NFSI Mathematical Reasoning section, IO Solutions presents tabular data and charts to evaluate your ability to extract relevant numbers, cross-reference multiple data dimensions, calculate statistical metrics (averages, totals, percentages), and identify operational trends under time pressure.

No calculators are permitted during the NFSI. Success depends on disciplined scratchwork, careful reading of row/column headings, and precise execution of manual arithmetic.

Section 1: Fire Department Response Time Logs

Response time logs record timestamps for key incident milestones:

Call Received Time: When the 911 dispatch center receives the emergency call.

Dispatch Time: When the fire station alert is broadcast to apparatus units.

En Route Time: When the apparatus leaves the station bay.

Arrival Time: When the apparatus arrives at the emergency scene location. Turnout Time = En Route Time − Dispatch Time \text{Turnout Time} = \text{En Route Time} - \text{Dispatch Time} Turnout Time = En Route Time − Dispatch Time Travel Time = Arrival Time − En Route Time \text{Travel Time} = \text{Arrival Time} - \text{En Route Time} Travel Time = Arrival Time − En Route Time Total Response Time = Arrival Time − Call Received Time \text{Total Response Time} = \text{Arrival Time} - \text{Call Received Time} Total Response Time = Arrival Time − Call Received Time

Sample Data Table: Station Response Log

  • Incident # Call Received Dispatch Time Arrival Time Incident Type Station
  • 101 08:02:10 08:03:10 08:08:10 Emergency Medical Station 1
  • 102 09:15:00 09:17:00 09:25:00 Structure Fire Station 2
  • 103 11:30:20 11:31:20 11:36:20 Motor Vehicle Collision Station 1
  • 104 14:05:00 14:07:00 14:16:00 Hazardous Materials Station 3
  • 105 16:40:00 16:41:00 16:46:00 Emergency Medical Station 2
  • Worked Example 3.1: Average Response Time Calculation

Problem: Based on the Station Response Log above, calculate the average Total Response Time (from Call Received to Arrival) for incidents handled by Station 1 .

Step 1: Identify incidents assigned to Station 1.

Step 2: Calculate Total Response Time for Incident 101.

Step 3: Calculate Total Response Time for Incident 103.

Step 4: Sum the response times and divide by count.

Result: The average total response time for Station 1 is 6 minutes 00 seconds 6\text{ minutes } 00\text{ seconds} 6 minutes 00 seconds .

Section 2: Annual Departmental Call Breakdown & Percentages

Fire departments categorize annual call volume into incident types to justify budget requests and staffing allocations. Percentage of Total Volume = ( Category Call Volume Total Call Volume ) × 100 % \text{Percentage of Total Volume} = \left( \frac{\text{Category Call Volume}}{\text{Total Call Volume}} \right) \times 100\% Percentage of Total Volume = ( Total Call Volume Category Call Volume ​ ) × 100%

Sample Data Table: Annual Incident Statistics

  • Incident Category Year 1 Volume Year 2 Volume Two-Year Total
  • Emergency Medical Services (EMS) 4,200 4,620 8,820
  • Structure Fires 350 315 665
  • Motor Vehicle Accidents (MVA) 850 935 1,785
  • Hazardous Materials 100 130 230
  • False Alarms / Service Calls 500 450 950
  • TOTAL INCIDENTS 6,000 6,450 12,450
  • Worked Example 3.2: Category Percentage Determination

Problem: What percentage of total Year 1 emergency calls were Emergency Medical Services (EMS) calls?

Step 1: Extract EMS Year 1 volume and Total Year 1 volume.

Step 2: Set up the fraction.

Step 3: Simplify the fraction without a calculator.

Step 4: Convert fraction to percentage.

Result: EMS calls accounted for 70 % 70\% 70% of total Year 1 incidents.

Worked Example 3.3: Percentage Increase Between Reporting Years

Problem: What was the percentage increase in Hazardous Materials incidents from Year 1 to Year 2? Percentage Change = ( Year 2 Value − Year 1 Value Year 1 Baseline Value ) × 100 % \text{Percentage Change} = \left( \frac{\text{Year 2 Value} - \text{Year 1 Value}}{\text{Year 1 Baseline Value}} \right) \times 100\% Percentage Change = ( Year 1 Baseline Value Year 2 Value − Year 1 Value ​ ) × 100%

Step 1: Extract Year 1 and Year 2 HazMat call numbers.

Step 2: Calculate absolute increase.

Step 3: Divide absolute increase by Year 1 baseline.

Step 4: Convert to percentage.

Result: Hazardous Materials incidents increased by 30 % 30\% 30% from Year 1 to Year 2.

Section 3: Shift Rosters & Staffing Tables

Staffing tables monitor firefighter availability, overtime hours, and shift compliance. Questions frequently ask candidates to identify deficit stations or total overtime costs.

Sample Data Table: Daily Shift Staffing Roster

  • Station # Minimum Staffing Scheduled Crew Sick Leave / Absent On-Duty Count
  • Station 1 12 14 3 11
  • Station 2 8 9 1 8
  • Station 3 6 6 2 4
  • Station 4 10 11 0 11
  • Worked Example 3.4: Staffing Deficit Determination

Problem: If off-duty personnel must be called in on overtime to bring all stations up to minimum staffing levels, how many total overtime personnel must be assigned for this shift?

Step 1: Calculate deficit for each station (Minimum Staffing - On-Duty Count).

Step 2: Sum all station deficits.

Result: A total of 3 overtime personnel are required.

NFSI Test-Taking Strategies for Data Tables

Read Labels First: Always check table titles, column headers, and footnote units before looking at numbers.

Isolate the Target Row/Column: Place a finger or straight edge on your scratch paper under the target row to prevent reading values from adjacent lines.

Verify Totals: Quickly add up row or column items to ensure the table total matches your mental calculation baseline.