Study guide

3.2 Five Steps of Risk Assessment

IOSH Managing Safely Exam

Track your progress as you read

Finished sections get a check mark.

1 Introduction & Exam Overview

1.1 What Is IOSH Managing Safely? 1.2 Exam Format & Dual Assessment 1.3 Certificate Validity & Study Plan

2 Chapter 1: Introducing Managing Safely

2.1 Moral, Legal & Financial Reasons 2.2 The Accident Cost Iceberg 2.3 Responsibility & Accountability

3 Chapter 2: Assessing Risks

3.1 Hazard, Hazardous Event & Risk 3.2 Five Steps of Risk Assessment 3.3 The 5×5 Likelihood × Consequence Matrix 3.4 Residual Risk, Suitable & Sufficient, Review

4 Chapter 3: Controlling Risks

4.1 ERICPD Hierarchy of Control 4.2 Reasonably Practicable 4.3 Safe Systems of Work (SSoW) 4.4 Permits to Work

5 Chapter 4: Understanding Responsibilities

5.1 Criminal vs Civil Law 5.2 Employer & Employee Duties 5.3 Enforcement, Improvement & Prohibition Notices 5.4 Knowledge Tests & Management Systems (HSG65 / ISO 45001)

6 Chapter 5: Hazard Categories, Noise, Vibration & Substances

6.1 Six Hazard Categories 6.2 Noise Hazards & Action Values 6.3 Hand-Arm & Whole-Body Vibration 6.4 Hazardous Substances, Asbestos & LEV

7 Chapter 6: Work at Height, Manual Handling, Fire & Electricity

7.1 Work at Height 7.2 Manual Handling, Slips & Trips 7.3 Fire Safety Basics 7.4 Electricity Hazards

8 Chapter 7: Stress, Work Equipment & Other Hazards

8.1 Work-Related Stress & Psychosocial Hazards 8.2 Work Equipment & Machinery 8.3 Confined Spaces, Workplace Transport & Welfare

9 Chapter 8: Investigating Incidents

9.1 Accidents, Incidents & Near Misses 9.2 Immediate, Underlying & Root Causes 9.3 Four-Step Investigation Process 9.4 RIDDOR Reporting Overview

10 Chapter 9: Measuring Performance

10.1 Active (Proactive) vs Reactive Indicators 10.2 KPIs & Characteristics of Good Metrics 10.3 Auditing the Safety Management System 10.4 Calculating Injury Incidence & Frequency Rates 10.5 Inspections & Benchmarking

11 Chapter 10: Protecting the Environment

11.1 Environmental Basics: Pollution, Waste & Duty of Care 11.2 Reducing Environmental Impact & Environmental Management Systems

12 Chapter 11: Risk Assessment Project & Exam Day

12.1 Project Requirements & Marking 12.2 Worked Example: Four-Hazard Assessment 12.3 Written Assessment Strategy & High-Yield Review

3.2 Five Steps of Risk Assessment

Key Takeaways Explain This Topic AI

The classic five steps are: identify hazards; decide who might be harmed and how; evaluate risks and decide on precautions; record significant findings; review and update.

Assessments must be suitable and sufficient — proportionate, covering significant foreseeable risks for workers and others (contractors, visitors, public).

Assess when introducing new work, after change, after incidents or near misses, and at sensible periodic intervals.

Managers own practical actions at each step: walk the job, consult workers, prioritise, assign owners and deadlines, and keep records usable.

With five or more employees, UK law expects significant findings to be recorded; paperwork supports control, it does not replace it.

Last updated: August 2026

3.2 Five Steps of Risk Assessment

Quick Answer: Managing Safely teaches a practical five-step risk assessment: (1) identify hazards , (2) decide who might be harmed and how , (3) evaluate the risks and decide on precautions , (4) record significant findings , (5) review and update . Do this for workers and others affected (contractors, visitors, public), keep it suitable and sufficient , and reassess when work or knowledge changes.

A risk assessment is not a bureaucratic essay. It is a structured way for a manager to look at real work, judge whether people are protected well enough, and put improvements in place. The five steps give you a repeatable method that matches what the Health and Safety Executive (HSE) expects when organisations manage risks at work.

The five steps at a glance

  • Step Focus Manager outcome
  • 1. Identify the hazards What could cause harm? A clear list of significant hazards for the activity/area
  • 2. Who might be harmed and how People + harm pathways Named groups and realistic injury/ill-health scenarios

3. Evaluate risks and decide on precautions Likelihood, severity, controls Prioritised actions; existing controls checked; further controls chosen

4. Record significant findings Evidence and communication Written record (especially if 5+ employees) people can use

5. Review and update Keep it live Triggers and dates so the assessment does not go stale

Modern HSE web guidance sometimes groups language as identify → assess → control → record → review. Managing Safely still trains managers on the classic five-step wording above; both point to the same practical process. Learn the five-step list in order — sequencing questions appear in assessments.

Step 1 — Identify the hazards

Look for anything with the potential to cause harm . Do not wait for an accident file to tell you.

How managers identify hazards well:

Walk the job at normal operating times and during awkward periods (shift change, night work, peak throughput).

Watch how work is really done , not only how procedures say it is done.

Talk to workers and supervisors — they know shortcuts, near misses, and awkward loads.

Review incident, near-miss, and ill-health records for patterns.

Check non-routine work: maintenance, cleaning, breakdowns, sampling, deliveries.

Read supplier information (safety data sheets, manuals) and previous assessments.

Consider health hazards as well as safety: noise, dust, chemicals, manual handling, stress drivers.

  • Source Example findings
  • Workplace inspection Trailing cables, blocked fire exits, damaged guards
  • Task observation Operators bypass interlocks to clear jams
  • Consultation Night team report poor lighting on the yard
  • Records Three minor slips near the packing line in six months
  • Documents SDS shows a cleaner is a skin sensitiser

Avoid two extremes: listing every trivial possibility until the assessment is unusable, or only listing hazards that have already injured someone. Aim for significant, reasonably foreseeable hazards.

Step 2 — Decide who might be harmed and how

For each hazard, name who could be affected and how the harm would occur (the hazardous event and pathway).

Groups to consider include:

  • Employees doing the task
  • Other employees nearby (shared spaces, multi-trade work)
  • Contractors and agency workers
  • Visitors, customers, and members of the public
  • Cleaners and maintenance staff

Vulnerable workers: young workers, new starters, migrant workers, new or expectant mothers, people with disabilities or health conditions, lone workers

"How" means a concrete scenario: "Warehouse operative may be struck by a reversing forklift when walking to the canteen because pedestrian routes cross vehicle routes without barriers."

Different groups often need different controls even for the same hazard. A visitor may need escorting; a contractor may need induction and a permit; a new mother may need adjusted lifting tasks.

Step 3 — Evaluate the risks and decide on precautions

Now judge how likely harm is and how severe it could be, given what you already do. Then decide whether existing precautions are enough or further action is required.

Questions for the manager:

What are we already doing to control this risk?

Can we eliminate the hazard or reduce it at source?

If not, how do we control exposure so harm is unlikely?

What further action is needed, who owns it, and by when ?

How will we check the control works?

Managing Safely later deepens control choice with ERICPD (Eliminate, Reduce, Isolate, Control, PPE, Discipline) and the idea of what is reasonably practicable . At this step you at least:

  • Compare current controls with good practice for the industry
  • Prioritise the highest risks first
  • Prefer collective, reliable controls over relying only on people "being careful"
  • Use PPE as support, not as the first and only answer

You will quantify many of these judgements with the 5×5 likelihood × consequence matrix in the next section. Even without numbers, step 3 is where you decide action.

Step 4 — Record significant findings

Recording turns judgement into something the organisation can share, implement, and audit.

What to record (significant findings):

  • The hazards
  • Who might be harmed and how
  • What you are doing to control the risks
  • Further action required, owners, and timescales
  • (In project work) risk ratings before and after additional controls

Under the UK Management of Health and Safety at Work Regulations principle taught on this course, if you employ five or more people you must record significant findings . Smaller organisations still benefit from simple records, and clients/insurers often expect them regardless of headcount.

Good records are:

  • Proportionate — longer and more detailed where risk is higher
  • Usable — supervisors can understand and follow them
  • Alive — linked to real controls on the floor, not filed and forgotten

HSE is clear: do not rely on paperwork alone ; controlling risk in practice is the priority. The record supports that control.

Step 5 — Review and update

Risk assessments go stale. Review when:

  • There is an accident, ill health case, or near miss
  • Work changes (new kit, chemicals, layout, process, shift pattern)
  • People change in ways that matter (new vulnerable workers, new contractors, loss of experienced staff)
  • Workers report that controls are impractical or failing
  • New information appears (updated SDS, manufacturer alert, enforcement guidance)
  • A set review date arrives (often annually for stable low-risk activities; sooner for higher risk)

Update the written assessment when findings change, and communicate what workers need to know.

Suitable and sufficient assessments

"Suitable and sufficient" is legal and course language for a quality bar. An assessment is suitable and sufficient when it:

  • Is proportionate to the risk and complexity of the work
  • Identifies significant hazards and foreseeable risks
  • Considers everyone who might be affected, including vulnerable groups
  • Enables valid decisions about precautions
  • Remains valid until circumstances change
  • Is recorded appropriately (significant findings)

It does not require zero residual risk, encyclopaedic listing of trivial issues, or that only an external consultant can sign it. Competence matters, but managers are expected to assess risks in their area — bringing in specialists for complex hazards (for example asbestos, major process safety) where needed.

When to assess (and reassess)

  • Trigger Manager action
  • New activity, process, or workplace Assess before work starts where possible
  • Change to plant, substances, layout, or people Reassess affected hazards and controls
  • After accident, near miss, or ill health Investigate and review the relevant assessment
  • Planned periodic review Confirm controls still work; update record
  • Doubt about validity Treat doubt as a review trigger, not a reason to wait
  • Manager action table — five steps
  • Step Practical manager actions
  • 1 Identify hazards Inspect; observe tasks; consult team; review incidents and SDS; include non-routine work
  • 2 Who & how List employees, contractors, visitors, public, vulnerable groups; describe harm scenarios

3 Evaluate & decide Rate risk; check existing controls; choose further controls; set owners and deadlines; prioritise high scores

  • 4 Record Capture significant findings; make the record available to those who need it; keep it proportionate
  • 5 Review Set review date; respond to incidents and change; update and re-communicate
  • Common failures (exam and real workplaces)
  • Copy-paste assessments that do not match the actual site
  • Ignoring contractors and the public
  • Listing hazards without saying who is at risk and how
  • Recording controls that are not actually in place
  • Never reviewing after change or incidents
  • Treating the form as the goal instead of safer work

If you run the five steps honestly, with worker involvement and clear ownership of actions, you meet the spirit of both Managing Safely and HSE risk-management guidance — and you build the exact habits the practical project marks.