Study guide
4.1 ERICPD Hierarchy of Control
IOSH Managing Safely Exam
Track your progress as you read
Finished sections get a check mark.
1 Introduction & Exam Overview
1.1 What Is IOSH Managing Safely? 1.2 Exam Format & Dual Assessment 1.3 Certificate Validity & Study Plan
2 Chapter 1: Introducing Managing Safely
2.1 Moral, Legal & Financial Reasons 2.2 The Accident Cost Iceberg 2.3 Responsibility & Accountability
3 Chapter 2: Assessing Risks
3.1 Hazard, Hazardous Event & Risk 3.2 Five Steps of Risk Assessment 3.3 The 5×5 Likelihood × Consequence Matrix 3.4 Residual Risk, Suitable & Sufficient, Review
4 Chapter 3: Controlling Risks
4.1 ERICPD Hierarchy of Control 4.2 Reasonably Practicable 4.3 Safe Systems of Work (SSoW) 4.4 Permits to Work
5 Chapter 4: Understanding Responsibilities
5.1 Criminal vs Civil Law 5.2 Employer & Employee Duties 5.3 Enforcement, Improvement & Prohibition Notices 5.4 Knowledge Tests & Management Systems (HSG65 / ISO 45001)
6 Chapter 5: Hazard Categories, Noise, Vibration & Substances
6.1 Six Hazard Categories 6.2 Noise Hazards & Action Values 6.3 Hand-Arm & Whole-Body Vibration 6.4 Hazardous Substances, Asbestos & LEV
7 Chapter 6: Work at Height, Manual Handling, Fire & Electricity
7.1 Work at Height 7.2 Manual Handling, Slips & Trips 7.3 Fire Safety Basics 7.4 Electricity Hazards
8 Chapter 7: Stress, Work Equipment & Other Hazards
8.1 Work-Related Stress & Psychosocial Hazards 8.2 Work Equipment & Machinery 8.3 Confined Spaces, Workplace Transport & Welfare
9 Chapter 8: Investigating Incidents
9.1 Accidents, Incidents & Near Misses 9.2 Immediate, Underlying & Root Causes 9.3 Four-Step Investigation Process 9.4 RIDDOR Reporting Overview
10 Chapter 9: Measuring Performance
10.1 Active (Proactive) vs Reactive Indicators 10.2 KPIs & Characteristics of Good Metrics 10.3 Auditing the Safety Management System 10.4 Calculating Injury Incidence & Frequency Rates 10.5 Inspections & Benchmarking
11 Chapter 10: Protecting the Environment
11.1 Environmental Basics: Pollution, Waste & Duty of Care 11.2 Reducing Environmental Impact & Environmental Management Systems
12 Chapter 11: Risk Assessment Project & Exam Day
12.1 Project Requirements & Marking 12.2 Worked Example: Four-Hazard Assessment 12.3 Written Assessment Strategy & High-Yield Review
4.1 ERICPD Hierarchy of Control
Key Takeaways Explain This Topic AI
ERICPD orders controls from strongest to weakest: Eliminate → Reduce (including substitution) → Isolate → Control → PPE → Discipline.
Higher controls protect everyone by removing or containing the hazard; PPE only protects the wearer and is a last resort.
Substitution sits under Reduce; acoustic enclosures under Isolate; job rotation and SSoW under Control; gloves under PPE; enforcement under Discipline.
Always apply the highest reasonably practicable level first; do not jump straight to PPE or rules when elimination or engineering is feasible.
Exam staple: put the six steps in order and classify workplace examples into the correct ERICPD letter.
Last updated: August 2026
4.1 ERICPD Hierarchy of Control
Quick Answer: ERICPD ranks controls from most to least effective: Eliminate , Reduce (including substitution), Isolate , Control (engineering and administrative measures such as SSoW, training, and time limits), PPE , then Discipline . Use the highest level that is reasonably practicable first. PPE protects only the individual; higher controls protect everyone.
Controlling Risks sits next to risk assessment in Managing Safely. Once you know the hazards and the size of the risk, you must decide what to do about it . ERICPD is the course's standard hierarchy for choosing and justifying controls. Assessment questions often ask you to order the steps or place an example (guards, gloves, job rotation, substitution) under the correct letter.
Why a hierarchy exists
Not all controls are equal. Removing a toxic solvent from the process is more reliable than telling people to wear gloves carefully. A fixed machine guard that cannot be easily defeated is more reliable than a temporary barrier or a warning sign alone. The hierarchy forces managers to think upstream — change the hazard or the way the work is done — before relying on personal behaviour and personal equipment.
Using ERICPD well helps you:
- Prefer controls that protect all workers , visitors, and contractors in the area
- Avoid the default habit of “issue PPE and hope”
- Explain to senior managers why a cheaper rule or glove is not enough for a serious risk
- Document a defensible residual-risk position after controls are applied
- Link assessment findings to practical action on the project form
UK law expects risks to be reduced so far as is reasonably practicable . ERICPD is not itself a statute, but it is a practical way to show you considered stronger options before weaker ones.
The ERICPD order (memorise this)
Letter Control level What it means Everyday examples
E Eliminate Remove the hazard completely so the risk no longer exists from that source Stop using a toxic chemical; design out work at height by assembling at ground level; remove a redundant process step that creates noise
R Reduce Lessen the hazard’s inherent danger or scale — includes substitution with something less hazardous Substitute a safer solvent; use a lower-voltage tool; reduce the quantity stored; buy quieter plant; reduce load weights
I Isolate Keep people away from the hazard using physical separation, enclosures, or barriers Acoustic enclosure around a noisy compressor; locked cage around live plant; closed transfer system for chemicals; barrier fencing around a construction zone
C Control Manage remaining risk with engineering and administrative measures that shape how work is done Local exhaust ventilation (LEV); machine guards interlocked with the process; safe system of work (SSoW); training and competence; job rotation / time limits; traffic management plans
P PPE Personal protective equipment worn by the individual Safety gloves, eye protection, hearing defenders, hard hats, respirators, high-visibility clothing, safety footwear
D Discipline Supervision, enforcement, rules, and sanctions that keep people using the other controls correctly Site rules, disciplinary procedures for bypassing guards, permit compliance checks, toolbox talks that enforce standards, refusal to start work without required controls
Reduce includes substitution
A common exam trap is treating substitution as its own letter. In ERICPD as taught here, substitution is a form of Reduce . You reduce the hazard by swapping a more dangerous substance, process, or energy level for a less dangerous one. If the question lists “substitute a water-based cleaner for a solvent,” the answer is Reduce , not Eliminate (unless the hazard is removed entirely with nothing hazardous left).
Control covers engineering and administrative
Control is broad on purpose. It includes:
Engineering controls that still leave the hazard present but manage exposure or energy (guards, LEV, interlocks, pressure relief, light curtains)
Administrative controls that organise people and time (SSoW, method statements, training, competence checks, scheduled maintenance, job rotation, restricted access procedures, signage as part of a managed system)
Do not invent a separate letter for “admin controls” — under ERICPD they sit under C .
Why the order matters
Higher controls protect everyone. If you eliminate a substance, nobody on site is exposed. If you isolate noise inside an enclosure, everyone outside benefits without having to remember to wear ear muffs. If you only issue hearing protection, the person who forgets, refuses, or fits it badly remains exposed — and visitors may never be issued PPE at all.
PPE is a last resort for residual risk , not a first choice. PPE fails when it is:
- Not selected for the right hazard
- Ill-fitting or uncomfortable so people remove it
- Not maintained, cleaned, or replaced
- Used without training
- Relied on while a cheaper engineering fix was reasonably practicable
Discipline sits at the bottom because rules and punishment do not remove energy or toxicity. Supervision and enforcement matter — they keep the higher controls working — but they are supporting measures. A manager who only writes “staff must take care” has not controlled the risk.
Exam staple — order first, then classify
You will almost always need one of two skills:
- Recite or recognise the sequence Eliminate → Reduce → Isolate → Control → PPE → Discipline
- Classify an example into the correct level
Use this mini classification table until the pattern is automatic:
- Example Correct ERICPD level Why
- Stop using a hazardous process step entirely Eliminate Hazard source removed
- Replace solvent cleaner with a milder alternative Reduce (substitution) Hazard still present but less severe
- Fit an acoustic enclosure around plant Isolate People separated from noise energy
- Job rotation so no one exceeds exposure time Control Administrative limit on exposure
- Interlocked guard on a press Control Engineering control of residual hazard
- Written safe system of work and training Control Administrative control of how work is done
- Chemical-resistant gloves PPE Protects the wearer only
- Hearing defenders for residual noise PPE Personal barrier, last layer
- Disciplinary procedure for removing guards Discipline Enforcement of rules / other controls
- Supervisor stopping unsafe work and enforcing PTW rules Discipline Supervision and enforcement
- Worked reasoning — noisy workshop
Scenario: a fixed compressor produces high noise in a production area.
Eliminate? Can the process run without compressed air? Sometimes redesign removes the need; if not, elimination fails the practicality test.
Reduce? Quieter compressor model, anti-vibration mounts, maintenance to reduce rattle — reduces the hazard intensity.
Isolate? Full acoustic enclosure or relocating the compressor to a plant room — separates people from the source.
Control? Restricted access during peak use, shorter shifts near the plant, planned maintenance SSoW, signage as part of a managed zone.
PPE? Hearing protection for residual exposure when people must enter the area.
Discipline? Checks that muffs are worn and that doors on the enclosure stay shut.
A manager who only buys ear plugs has jumped to P and will struggle to justify that choice if stronger options were reasonably practicable.
Combining levels (usual practice)
Real workplaces stack controls. Elimination is ideal but not always possible. Typical stacks look like:
- Reduce the substance hazard by substitution and
- Isolate with closed transfer and
- Control with LEV and SSoW and
- PPE for residual splash risk and
- Discipline via supervision and audits
- The hierarchy is not “pick only one letter.” It is “work from the top; use lower levels for what remains.”
- Manager checklist — ERICPD decisions
When you choose controls after a risk assessment, ask:
Can we eliminate this hazard completely without creating a worse one?
If not, can we reduce it (including substitute something safer)?
Can we isolate people from what remains with physical barriers or enclosures?
What control measures (engineering + SSoW, training, time limits) manage residual risk?
What PPE is needed only for what still cannot be controlled higher up?
How will discipline — supervision and rules — keep the system working day to day?
Have I recorded why I rejected higher options (cost, technical feasibility, new risks)?
Link this to the next sections: reasonably practicable explains how far you must climb the hierarchy; SSoW and permits to work are key Control (and sometimes Discipline ) tools for complex residual risks.
Linking ERICPD to the rest of Managing Safely
Assessing risks: scores tell you which risks need stronger ERICPD action first.
Reasonably practicable: cost, time, and trouble of higher controls are weighed against risk reduction — but significant risks still demand serious action.
SSoW and PTW: formal work methods and authorisations sit mainly under Control , with enforcement under Discipline .
Hazards modules: for noise, vibration, chemicals, work at height, and electricity, always try higher ERICPD levels before PPE.
Incident investigation: many incidents show over-reliance on PPE or rules while elimination or guarding was available.
Master the order and the classification table and you will secure easy marks — and write better project controls.