Study guide
1.3 Certificate Validity & Study Plan
IOSH Managing Safely Exam
Track your progress as you read
Finished sections get a check mark.
1 Introduction & Exam Overview
1.1 What Is IOSH Managing Safely? 1.2 Exam Format & Dual Assessment 1.3 Certificate Validity & Study Plan
2 Chapter 1: Introducing Managing Safely
2.1 Moral, Legal & Financial Reasons 2.2 The Accident Cost Iceberg 2.3 Responsibility & Accountability
3 Chapter 2: Assessing Risks
3.1 Hazard, Hazardous Event & Risk 3.2 Five Steps of Risk Assessment 3.3 The 5×5 Likelihood × Consequence Matrix 3.4 Residual Risk, Suitable & Sufficient, Review
4 Chapter 3: Controlling Risks
4.1 ERICPD Hierarchy of Control 4.2 Reasonably Practicable 4.3 Safe Systems of Work (SSoW) 4.4 Permits to Work
5 Chapter 4: Understanding Responsibilities
5.1 Criminal vs Civil Law 5.2 Employer & Employee Duties 5.3 Enforcement, Improvement & Prohibition Notices 5.4 Knowledge Tests & Management Systems (HSG65 / ISO 45001)
6 Chapter 5: Hazard Categories, Noise, Vibration & Substances
6.1 Six Hazard Categories 6.2 Noise Hazards & Action Values 6.3 Hand-Arm & Whole-Body Vibration 6.4 Hazardous Substances, Asbestos & LEV
7 Chapter 6: Work at Height, Manual Handling, Fire & Electricity
7.1 Work at Height 7.2 Manual Handling, Slips & Trips 7.3 Fire Safety Basics 7.4 Electricity Hazards
8 Chapter 7: Stress, Work Equipment & Other Hazards
8.1 Work-Related Stress & Psychosocial Hazards 8.2 Work Equipment & Machinery 8.3 Confined Spaces, Workplace Transport & Welfare
9 Chapter 8: Investigating Incidents
9.1 Accidents, Incidents & Near Misses 9.2 Immediate, Underlying & Root Causes 9.3 Four-Step Investigation Process 9.4 RIDDOR Reporting Overview
10 Chapter 9: Measuring Performance
10.1 Active (Proactive) vs Reactive Indicators 10.2 KPIs & Characteristics of Good Metrics 10.3 Auditing the Safety Management System 10.4 Calculating Injury Incidence & Frequency Rates 10.5 Inspections & Benchmarking
11 Chapter 10: Protecting the Environment
11.1 Environmental Basics: Pollution, Waste & Duty of Care 11.2 Reducing Environmental Impact & Environmental Management Systems
12 Chapter 11: Risk Assessment Project & Exam Day
12.1 Project Requirements & Marking 12.2 Worked Example: Four-Hazard Assessment 12.3 Written Assessment Strategy & High-Yield Review
1.3 Certificate Validity & Study Plan
Key Takeaways Explain This Topic AI
The IOSH Managing Safely certificate does not expire; IOSH recommends refresher training but publishes no fixed interval, and approved providers commonly advise the one-day Refresher about every three years.
Taught delivery is typically about three days / roughly 21–25 hours, plus personal revision before the paper and time to finish the project.
High-yield memorisation includes the 5×5 matrix, ERICPD order, noise 80/85/87 dB(A), HAV 2.5/5.0 m/s², cause levels, and active vs reactive measures.
Use this study guide for structured teaching and the free ExamFinch practice bank for Part 1-style retrieval practice.
Managing Safely often sits on the pathway toward the NEBOSH National General Certificate for dedicated H&S roles.
Last updated: August 2026
Certificate validity and refreshers
Unlike many professional licences that expire annually, the IOSH Managing Safely certificate does not expire . Once you have passed both assessments, you keep the award.
However, workplaces change, law is updated, and personal habits fade. IOSH offers a one-day Managing Safely Refresher for people who have already completed the full course and recommends refreshing to stay current with best practice and regulatory change — but the IOSH course page does not publish a fixed interval . Approved providers commonly advise a refresher about every three years (some describe a three-to-five-year window, and several state that beyond five years the full course should be retaken). Employers and clients may also require evidence of recent training even though the original certificate remains valid. Treat the three-year figure as provider guidance and a common commercial expectation , not as an expiry date printed by IOSH.
- Item Position
- Certificate expiry Does not expire
Recommended refresher One-day Managing Safely Refresher; no fixed interval published by IOSH — providers commonly advise ~ 3 years
- Employer / client rules May still demand recent training records
- Name on certificate IOSH Managing Safely (via approved provider completion)
- How long the course takes
- Element Typical time
- Taught programme About 3 days / roughly 21–25 hours guided learning
- Personal revision Often 5–10 hours before/around the written paper (varies by experience)
- Project Several focused hours within the provider window (often ~ 14 days )
- Total calendar span Often one intensive week plus project finish, or a hybrid schedule over longer
Exam-meta on this site summarises average study as the multi-day course plus revision — plan your diary for both assessments, not only classroom attendance.
High-yield memorisation list
These items recur across Part 1 and feed Part 2 quality. Memorise them early; deepen understanding in later chapters.
1. The 5×5 risk matrix
Likelihood scored 1–5 and consequence scored 1–5.
Risk rating = likelihood × consequence (range 1–25).
Higher products demand stronger action; residual risk is the rating after further controls.
Exam trap: multiplying wrong way around does not change the product, but mis-labelling which axis is which in a written explanation can lose project marks.
2. ERICPD control order
Memorise the order (higher first):
- E liminate
- R educe
- I solate
- C ontrol (engineering / procedural layer as taught)
- P PE
- D iscipline (rules, supervision, training, enforcement of safe behaviour)
PPE and discipline are not preferred first choices when elimination or engineering will work. Questions that put “issue gloves” above “remove the substance” are testing whether you know the hierarchy.
3. Noise action and limit values (dB(A))
- Level Value Manager cue
- Lower exposure action value (LEAV) 80 dB(A) Information, training, hearing checks as required
- Upper exposure action value (UEAV) 85 dB(A) Stronger duties — control noise, hearing protection zones
Exposure limit value (ELV) 87 dB(A) Must not be exceeded (with hearing protection attenuation accounted as rules require)
Remember the trio 80 / 85 / 87 — a classic short-answer target.
4. Hand-arm vibration (HAV)
- Level Value
- Exposure action value (EAV) 2.5 m/s² A(8)
- Exposure limit value (ELV) 5.0 m/s² A(8)
Link these to tool selection, job rotation, maintenance, and health surveillance themes in later hazard chapters.
5. Incident cause levels
Immediate causes — the unsafe act or condition right at the event (e.g. missing guard).
Underlying causes — job or human factors that allowed it (e.g. poor training, production pressure).
Root causes — management system failures (e.g. no maintenance regime, no risk assessment process).
Exams love options that stop at blame of the injured person. Strong answers dig deeper without ignoring the immediate failure.
6. Active vs reactive performance measures
- Type Also called Examples
- Active Leading / proactive Inspections completed, training % , near-miss reports acted on, audit close-outs
- Reactive Lagging Injury rates, days lost, RIDDOR counts, insurance claims
Both matter; relying only on injury rates is a known trap because low injuries can hide weak control of serious risks.
- 7. The injury incidence rate calculation
- Injury incidence rate = (reportable injuries ÷ average number of employees) × 100,000
Worked check: 2 injuries among 50 employees gives (2 ÷ 50) × 100,000 = 4,000 per 100,000 . This is one of the few genuine calculations on the course — practise it until the × 100,000 is automatic.
- 8. The waste hierarchy (in order)
- Prevention
- Preparing for re-use
- Recycling
- Other recovery (for example energy recovery)
- Disposal
Prevention at the top, disposal last. Applying the hierarchy is a legal duty, not a slogan.
- Suggested study plan (before and during the course)
- Before day 1 (2–4 hours)
Read this introduction chapter fully.
Memorise ERICPD, 80/85/87, 2.5/5.0, cause levels, the incidence rate formula, and the waste hierarchy order.
Skim your workplace for four plausible project hazards so the template is not blank on day three.
During the three days
Treat each module as a closed set: definitions → tool → workplace example → quiz.
Write one personal example per module (your site, your team).
Note any provider-specific project template field that is mandatory.
Between paper and project deadline
Draft all four hazard rows in one sitting; improve ratings the next day with a fresh eye.
Ask a colleague only for factual site detail (not for them to complete your assessed work if rules forbid it).
Submit early enough to survive upload or admin issues.
Weekly refresh after certification (optional but high value)
20 minutes of practice questions monthly for three months.
Diary a 3-year refresher reminder.
How to use this ExamFinch study guide
Read each section’s teaching text (definitions, tables, scenarios).
Answer the in-section quizzes without scrolling to explanations first.
Drill the free practice question bank for iosh-managing-safely for spaced retrieval.
Use AI tutor features (within free daily limits) to unpick “reasonably practicable,” residual risk, or cause levels in your own words.
Return to hazard and investigation chapters until high-yield numbers are automatic.
This guide is study material — it complements, and does not replace, your IOSH-approved provider course and official assessment instruments.
Career pathway after Managing Safely
- Next step When it makes sense
- Apply tools at work Default — improve toolbox talks, risk reviews, contractor control
- Managing Safely Refresher ~3 years or after role change
NEBOSH National General Certificate Moving toward dedicated H&S responsibilities or stronger formal recognition
NEBOSH Diploma / chartered route Long-term H&S professional career
Managing Safely is often the first formal step for operational leaders. NEBOSH NGC is the common next formal step when the job becomes safety-specialist rather than “manager who also owns safety.”
Scenario: building a personal revision card
Priya finishes day 2 of the course. That evening she writes a single card:
- ERICPD order
- 5×5 product bands she was taught
- 80 / 85 / 87 and 2.5 / 5.0
- Immediate → underlying → root with one warehouse example each
- Two active KPIs and two reactive KPIs for her site
On day 3 she reviews the card for 15 minutes before the paper. That is higher yield than re-reading all slides once.
Exam traps about validity and planning
Believing the certificate expires in three years (the refresher is recommended; the award itself does not expire).
Skipping project time in the study plan because “the exam is only 45 minutes.”
Memorising only PPE rules while ignoring ERICPD order.
Treating NEBOSH and IOSH as interchangeable product names.
- Official anchors for further reading
- IOSH Managing Safely course pages on iosh.com
- HSE guidance on simple risk assessment and managing for health and safety (HSG65 thinking)
- Your provider handbook for exact invigilation, pass confirmation, and project upload steps
Lock the logistics from Sections 1.1–1.2, lock the high-yield list in this section, then move into moral/legal/financial reasons and the full risk tools in the next chapters.