Study guide

7.2 Manual Handling, Slips & Trips

IOSH Managing Safely Exam

Track your progress as you read

Finished sections get a check mark.

1 Introduction & Exam Overview

1.1 What Is IOSH Managing Safely? 1.2 Exam Format & Dual Assessment 1.3 Certificate Validity & Study Plan

2 Chapter 1: Introducing Managing Safely

2.1 Moral, Legal & Financial Reasons 2.2 The Accident Cost Iceberg 2.3 Responsibility & Accountability

3 Chapter 2: Assessing Risks

3.1 Hazard, Hazardous Event & Risk 3.2 Five Steps of Risk Assessment 3.3 The 5×5 Likelihood × Consequence Matrix 3.4 Residual Risk, Suitable & Sufficient, Review

4 Chapter 3: Controlling Risks

4.1 ERICPD Hierarchy of Control 4.2 Reasonably Practicable 4.3 Safe Systems of Work (SSoW) 4.4 Permits to Work

5 Chapter 4: Understanding Responsibilities

5.1 Criminal vs Civil Law 5.2 Employer & Employee Duties 5.3 Enforcement, Improvement & Prohibition Notices 5.4 Knowledge Tests & Management Systems (HSG65 / ISO 45001)

6 Chapter 5: Hazard Categories, Noise, Vibration & Substances

6.1 Six Hazard Categories 6.2 Noise Hazards & Action Values 6.3 Hand-Arm & Whole-Body Vibration 6.4 Hazardous Substances, Asbestos & LEV

7 Chapter 6: Work at Height, Manual Handling, Fire & Electricity

7.1 Work at Height 7.2 Manual Handling, Slips & Trips 7.3 Fire Safety Basics 7.4 Electricity Hazards

8 Chapter 7: Stress, Work Equipment & Other Hazards

8.1 Work-Related Stress & Psychosocial Hazards 8.2 Work Equipment & Machinery 8.3 Confined Spaces, Workplace Transport & Welfare

9 Chapter 8: Investigating Incidents

9.1 Accidents, Incidents & Near Misses 9.2 Immediate, Underlying & Root Causes 9.3 Four-Step Investigation Process 9.4 RIDDOR Reporting Overview

10 Chapter 9: Measuring Performance

10.1 Active (Proactive) vs Reactive Indicators 10.2 KPIs & Characteristics of Good Metrics 10.3 Auditing the Safety Management System 10.4 Calculating Injury Incidence & Frequency Rates 10.5 Inspections & Benchmarking

11 Chapter 10: Protecting the Environment

11.1 Environmental Basics: Pollution, Waste & Duty of Care 11.2 Reducing Environmental Impact & Environmental Management Systems

12 Chapter 11: Risk Assessment Project & Exam Day

12.1 Project Requirements & Marking 12.2 Worked Example: Four-Hazard Assessment 12.3 Written Assessment Strategy & High-Yield Review

7.2 Manual Handling, Slips & Trips

Key Takeaways Explain This Topic AI

Manual handling means transporting or supporting a load by hand or bodily force — lifting, lowering, pushing, pulling, carrying, or moving.

Assess manual handling with TILE/LITE factors: Task, Individual, Load, and Environment (same four factors; letter order varies by trainer).

Control handling risks by eliminating unnecessary handling, using mechanical aids, team lifts where appropriate, redesigning tasks, and training in safer techniques — training alone is not enough.

Slips and trips are among the leading causes of workplace injury; manage contamination, flooring, footwear, trailing cables, lighting, and housekeeping.

Managers should use structured TILE checks and treat slip/trip controls as daily operational discipline, not a one-off poster campaign.

Last updated: August 2026

7.2 Manual Handling, Slips & Trips

Quick Answer: Manual handling is transporting or supporting a load by hand or bodily force . Assess it with TILE/LITE : Task, Individual, Load, Environment . Prefer eliminate handling , mechanical aids , redesign, and team methods before relying on technique training alone. Slips and trips cause a large share of workplace injuries — control contamination, flooring, footwear, cables, lighting, and housekeeping .

Not every serious injury is a dramatic fall from a roof. Bad backs, hernias, and chronic musculoskeletal disorders (MSDs) from handling, plus broken wrists and head injuries from slips on wet floors, dominate many organisational accident books. Managing Safely expects managers to assess handling systematically and to run workplaces where floors stay fit for purpose.

Manual handling — definition and scope

Manual handling means any transporting or supporting of a load (including lifting, putting down, pushing, pulling, carrying, or moving) by hand or bodily force . Loads include boxes, equipment, people (in care settings), animals, and awkward items such as long pipes or unstable containers.

Important nuances:

  • Pushing and pulling (trolleys, roll cages) count — not only lifts from the floor
  • Supporting a load in a static posture (holding a panel while someone else fixes it) counts
  • Frequent light loads can harm as much as one heavy lift if repetition and poor posture combine

People-handling in healthcare and social care is specialised manual handling with additional equipment and training expectations

The Manual Handling Operations Regulations 1992 (as amended) require employers to avoid hazardous manual handling so far as reasonably practicable; where it cannot be avoided, assess and reduce the risk to as low as reasonably practicable. That is the same hierarchy mindset you use elsewhere: avoid first, then control residual risk.

Why handling injuries happen

MSDs develop from:

  • Loads that are too heavy, bulky, unstable, or hard to grasp
  • Twisting, stooping, reaching, or working above shoulder height
  • Long carrying distances and frequent repetition
  • Individuals who are untrained, fatigued, pregnant, young, or returning from injury
  • Environments with poor space, uneven floors, stairs, heat, cold, or time pressure

Managers who only say “bend your knees” while leaving 30 kg sacks at the far end of a cluttered store have not controlled the risk.

TILE / LITE assessment factors

Trainers use TILE or LITE — the same four factors in different letter order. Learn all four; exams may use either acronym.

Factor What to examine Manager questions

T — Task What the person does with the load Does the task involve twisting, stooping, reaching, long carries, repetitive handling, high work rate, or team coordination? Can the task be redesigned or automated?

I — Individual Who is doing the work Do they have the strength, fitness, training, and health for the job? Are they pregnant, young, disabled, or returning from injury? Is PPE restricting movement? Is there enough people for a team lift?

L — Load What is being handled Weight, size, bulk, stability, centre of gravity, sharp edges, temperature, contents that may shift (liquids), grip points, cleanliness

E — Environment Where the handling happens Space constraints, floor condition, levels/stairs/ramps, lighting, temperature/humidity, wind (outdoor sheets), housekeeping, doors that slam on carriers

TILE manager checklist table

TILE factor Red flags (investigate / redesign) Better controls to consider

Task Twisting while lifting; load held away from the body; frequent repetition all shift; long vertical lifts from floor to high shelf Change layout so loads are at waist height; use conveyors or lifts; job rotation; split deliveries

Individual No training; lone worker on heavy team-only loads; known back problems ignored; new agency staff thrown in cold Select suitable people; train; buddy systems; temporary adjustments; occupational health advice

Load Unknown weight; unstable drum; no handles; shifting liquid; overpacked box Label weights; break down loads; use drums with pumps; add handles/packaging design; mechanical lift

Environment Cluttered aisle; wet floor; poor light; cold store stiffness; steps mid-route Clear routes; fix floors; improve lighting; plan routes; stage loads to avoid stairs

Use TILE when completing risk assessments and when walking the job. Write specific findings (“25 kg flour sacks lifted from pallet on floor to mixer rim 20 times per hour in a narrow, flour-dusty aisle”) rather than “manual handling — medium risk.”

Controlling manual handling risks

Apply hierarchy thinking:

Priority Control Examples

1 Eliminate hazardous handling Deliver to point of use; bulk handling systems; redesign process so double-handling stops

2 Automate / mechanical aids Forklifts, pallet trucks, hoists, vacuum lifters, conveyors, patient hoists, sack barrows, roll cages used correctly

3 Redesign task and workplace Waist-height storage; reduce carry distance; improve grip; split loads; better packaging

4 Team handling Planned team lifts with enough people, clear co-ordination, and similar stature/capability where possible

5 Training and supervision Kinetic handling principles, recognising hazardous loads, using aids, reporting pain early

  • 6 PPE (limited role) Gloves for grip/cuts; safety footwear — PPE does not make a 40 kg awkward lift “safe”
  • Critical teaching point

Training alone is not a sufficient control if the load, task, and environment remain poorly designed. Technique helps, but ERICPD-style prevention and mechanical aids do more for injury rates. Exam answers that only say “train staff to lift properly” score weakly against “eliminate / use a sack truck / store at waist height / reduce frequency.”

  • Mechanical aids — manager duties
  • Provide aids that match the load and environment
  • Maintain them (faulty pallet truck wheels recreate the handling problem)
  • Train people to use them
  • Allow time to fetch the aid — production pressure that forces manual lifts defeats the control
  • Keep charging, storage, and traffic routes sorted for powered equipment
  • Team lifts

Team lifting is not two people grabbing opposite ends without a plan. Good practice includes:

  • Enough people for the load
  • A nominated leader calling the lift
  • Clear path and set-down point before starting
  • Similar understanding of timing
  • Knowing when the load still needs a mechanical aid instead
  • People handling (awareness)

In care, healthcare, and some education settings, the “load” is a person. Additional principles apply: dignity, communication, hoist and slide-sheet use, no unsafe drag-lifts, and individual care plans. Managing Safely at overview level expects you to recognise that people-handling needs specialist risk assessment and equipment , not generic box-lifting tips alone.

Linking handling to the project and matrix

Example chain:

Hazard: Manual handling of 20 kg ingredient sacks.

Hazardous event: Repeated stooping lifts causing back injury / MSD.

Who: Production operators, agency cover, delivery staff.

TILE notes: Task repetitive; individuals mixed experience; load bulky; environment tight and occasionally slippery with product.

Additional controls: Pallet stacker; waist-height racking; smaller unit sizes; scheduled aids use; training; rota design.

Residual risk: Lower likelihood; consequence of MSD still significant if controls lapse — supervise and maintain aids.

Slips and trips — the everyday major hazard

Slips and trips are consistently among the leading causes of workplace injuries reported to the HSE and appearing in organisational stats. They are “ordinary” until someone fractures a hip, suffers a head injury, or a hot-drink scald follows a fall. Managers must treat them as serious, not inevitable.

Slips vs trips

Type Typical causes

Slip Contamination (water, oil, food, dust, granules) on smooth floors; unsuitable footwear; sudden changes in floor surface; weather-tracked rain at entrances

Trip Trailing cables, uneven surfaces, curled mats, poor housekeeping, poorly stored materials, changes in level that are unmarked, poor lighting hiding hazards

Many incidents are slip then trip combinations or falls on stairs that mix both.

Core control areas

Control area Manager actions

Contamination Stop leaks at source; drip trays; lids on containers; clean as you go; dry mopping regimes; spill response with correct methods (not just paper on oil)

Flooring Specify slip-resistant surfaces for the environment; maintain floors; repair damage; avoid polished-smooth finishes in wet process areas

Footwear Safety/occupational footwear with suitable sole for the contamination risk; visitor controls at industrial sites

  • Housekeeping Clear walkways; designated storage; waste removal schedules; end-of-shift standards
  • Trailing cables Cable covers, overhead routes, wireless where practicable, planned temporary supplies
  • Lighting Adequate, even lighting on stairs, external paths, and stores; replace failed lamps promptly
  • Entrances & weather Mats that actually absorb water and lie flat; canopies; wet-floor procedures on rainy days
  • Stairs and changes in level Handrails, markings, consistent risers, no storage on stairs

Human factors Avoid rushing culture; see-and-avoid only works if people are not forced to carry loads that block vision

Cleaning regimes — a double risk

Wet cleaning can create the slip it is meant to prevent. Controls include:

  • Clean during low traffic where possible
  • Warning signage that is removed when the floor is dry (permanent signs train people to ignore them)
  • Methods that dry quickly
  • Cordons for large wet areas
  • Choosing cleaning products compatible with floor slip resistance
  • Shared themes: handling and slips together

Handling and slips interact:

  • Carrying a load reduces ability to recover from a slip
  • Blocked vision over a tall load increases trip risk
  • Spilled product creates both contamination slips and the next handling mess
  • Pushing a heavy roll cage on a slope combines handling force with vehicle-like momentum

Risk assessments should not treat them as totally separate silos when the job combines both.

Worked scenarios

Scenario TILE / slip issues Stronger controls

Retail stockroom: 15 kg boxes to top shelf daily Task above shoulder; environment cramped Lower storage for heavy goods; steps/platform designed for the job; delivery restock process change

Kitchen: oil on smooth tiles Slip contamination; footwear Matronage of oil at fryers; slip-resistant flooring; correct shoes; immediate spill clean-up

Office move: everyone carries monitors up stairs Task stairs; individual mixed; load awkward Lift bookings; trolleys; professional movers; no “all hands” heroics

Warehouse: cable across aisle from temporary charger Trip Overhead cable route; designated charging bay; cable management

  • Common exam traps
  • Forgetting pushing/pulling is manual handling
  • Mixing up TILE letters or omitting Environment or Individual
  • Claiming training alone satisfies handling duties
  • Treating slips as unavoidable “accidents” rather than controllable events
  • Leaving wet-floor signs out permanently as a substitute for drying floors
  • Manager checklist

List significant handling tasks; apply avoid → assess → reduce .

Run TILE/LITE on each significant task; record specific findings.

Invest in mechanical aids and layout changes; make time to use them.

Train people, but do not use training as a fig leaf for poor design.

Treat slips and trips as a top injury cause: contamination, floors, footwear, cables, light, housekeeping.

Fix leaks and housekeeping with the same energy you would give a machine guard fault.

Include handling and floor conditions on inspections and the Managing Safely project where relevant.

Control the ordinary hazards and you prevent extraordinary harm: most workers will meet a sack, a roll cage, or a wet floor far more often than a complex chemical process — and managers are judged on whether those everyday risks were taken seriously.