Study guide
4.3 Chemical Stress Beyond Herbicides: Growth Regulators, Adjuvants, Salts, Metals & Air Pollutants
ISA Board Certified Master Arborist BCMA
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: The BCMA Exam & How to Prepare
1.1 The BCMA Exam: Format, Eligibility, Fees & the Current Content Outline
2 Chapter 2: Tree Biology, Physiology & Anatomy
2.1 Cellular Anatomy, Meristems, Vascular Architecture & Secondary Growth 2.2 Photosynthesis, Respiration & Carbohydrate Allocation Dynamics 2.3 CODIT (Compartmentalization of Decay in Trees) & Reaction Wood 2.4 Tree Life Stages, Decline Spirals, Veteran Tree Management & Propagation
3 Chapter 3: Soil Science, Soil Chemistry & the Rhizosphere
3.1 Soil Physical Properties, Texture, Structure & Bulk Density 3.2 Soil Chemistry: Cation Exchange Capacity (CEC), pH & Salinity 3.3 The Rhizosphere, Soil Food Web & Mycorrhizal Relationships 3.4 Urban, Disturbed & Engineered Soils: Structural Soils and Suspended Pavement 3.5 Soil–Water Interactions: Drainage Diagnosis, Perched Water & Remediation Design
4 Chapter 4: Abiotic Disorders & Tree Nutrition
4.1 Abiotic Environmental Stresses: Moisture, Temperature & Chemical Injury 4.2 Mechanical Injury, Hardware Damage, Root Defects & Lightning Injury 4.3 Chemical Stress Beyond Herbicides: Growth Regulators, Adjuvants, Salts, Metals & Air Pollutants 4.4 Essential Nutrients, Deficiencies, Toxicities & Element Mobility
5 Chapter 5: Biotic Disorders: Pathogens, Pests & Tree Defense
5.1 The Disease Triangle, Disease Cycles & Pest Life Cycles 5.2 Biotic Tree Pathogens: Wood Decay Fungi, Vascular Wilts & Cankers 5.3 Arthropod Pests: Feeding Guilds, Signs, Symptoms & Field Recognition 5.4 Tree Defense Responses to Biotic Injury: Constitutive, Induced & Structural
6 Chapter 6: Plant Identification, Selection & Urban Ecology
6.1 Dendrological Classification, Botanical Nomenclature & Morphological Keys 6.2 Species-Site Matching, Environmental Tolerances & Urban Forest Ecology 6.3 Ecological Interactions & Climate-Adaptive Selection: Succession, Allelopathy & Assisted Migration
7 Chapter 7: Systematic Arboricultural Diagnosis
7.1 The Systematic 5-Step Diagnostic Protocol & Clinical Signs vs Symptoms 7.2 Field Sampling Protocols, Laboratory Testing & Diagnostic Data Interpretation 7.3 Advanced Diagnostic Testing: Resistance Drilling, Sonic Tomography & Pulling Tests
8 Chapter 8: ANSI A300 Pruning Standards & Canopy Architecture
8.1 Biological Response to Pruning, Branch Anatomy & ANSI A300 Pruning Cuts 8.2 Structural Pruning of Young and Developing Trees: Architecture & Subordination 8.3 Mature Tree Canopy Management: Dosage Limits, Methods & Specialty Pruning 8.4 Pruning Tools, Sanitation & Writing Enforceable Pruning Specifications
9 Chapter 9: Plant Health Care (PHC) & Integrated Pest Management
9.1 Plant Health Care Concepts, Phenological Monitoring & Action Thresholds 9.2 Biological Controls, Cultural Management Tactics & Mechanical Interventions 9.3 Chemical Tactics, Modes of Action, Application Methods & Pollinator Protection
10 Chapter 10: Soil Treatment, Water Relations, Planting & Transplanting
10.1 Soil Compaction Remediation: Pneumatic Excavation, Vertical Mulching & Amendments 10.2 Tree Water Relations, Transpiration Dynamics, Moisture Sensing & Irrigation Design 10.3 Nursery Stock Evaluation, Planting Depth, Root Preparation & ANSI A300 Part 6 10.4 Transplanting Established Trees: Advance Root Pruning, Tree Spades & Post-Planting Care
11 Chapter 11: Support Systems, Lightning Protection, Climbing, Rigging & Removal
11.1 Tree Support Systems: Dynamic vs Static Cabling, Bracing Rods & Guying (ANSI A300 Part 3) 11.2 Tree Lightning Protection Systems: Theory, Components & Installation (ANSI A300 Part 4) 11.3 Climbing Systems (SRS/MRS), Rigging Physics, Vector Forces & Controlled Removal 11.4 Tree Removal Work Planning: Site Assessment, Method Selection & Traffic Control
12 Chapter 12: Tree Risk Assessment & Management
12.1 Tree Risk Assessment Framework: Levels 1, 2, and 3 (ISA BMP & TRAQ) 12.2 Likelihood of Failure, Likelihood of Impact & ISA Risk Matrix Rating 12.3 Risk Mitigation Alternatives, Residual Risk & Client Communication 12.4 Risk Reporting, Documentation, Inspection Cycles & Programmatic Risk Management
13 Chapter 13: Plant Appraisal (CTLA) & Valuation Methodologies
13.1 Principles of Plant Appraisal (CTLA 10th Ed): Cost, Sales & Income Approaches 13.2 The Trunk Formula Technique (TFT): Formulas, Depreciation & Unit Costs 13.3 Appraisal Casework: Casualty Loss, Eminent Domain, Trespass & Defensibility
14 Chapter 14: Trees & Construction
14.1 Pre-Construction Planning: Tree Surveys, Preservation Plans & Suitability 14.2 Tree Protection Zones (TPZ), Critical Root Zones (CRZ) & Barrier Protocols 14.3 Pre-Construction Treatment Prescriptions & Clearance Preparation 14.4 Construction Impact Monitoring, Engineering Alternatives & Post-Care
15 Chapter 15: Tree Inventories & Urban Forest Management Plans
15.1 Urban Forest Inventories, GIS Mapping & Strategic Management Plans 15.2 Implementing the Urban Forest Management Plan: Service Levels, Budgeting, Ordinances & Performance Metrics
16 Chapter 16: Worker Safety & ANSI Z133
16.1 ANSI Z133 Safety Standards: Job Briefings, PPE, Drop Zones & Chipper Safety 16.2 Electrical Hazards: Minimum Approach Distances (MAD) & Emergency Protocols 16.3 Chain Saw Safety, Work Positioning Aloft & Aerial Rescue Readiness 16.4 Tool, Rope & Equipment Inspection, Maintenance and Retirement Criteria 16.5 Safety Program Management: Training, Competency, Emergency Response & Incident Investigation
17 Chapter 17: Business Relations, Law & Professional Ethics
17.1 ISA Code of Ethics, Legal Liability, Boundary Trees & Expert Testimony 17.2 Contracts, Proposals, Specifications & Business Operations 17.3 Regulatory Compliance: Licensing, Pesticide Law, Employment & Environmental Restrictions
4.3 Chemical Stress Beyond Herbicides: Growth Regulators, Adjuvants, Salts, Metals & Air Pollutants
Key Takeaways Explain This Topic AI
Paclobutrazol and other gibberellin-biosynthesis inhibitors are sold at different concentrations, so the label rate must be recalculated from scratch whenever the product changes.
Ozone injury appears as fine stipple or flecking on the upper leaf surface of sensitive species and increases with cumulative seasonal exposure.
Horticultural oil applied during high heat, drought stress, or on sensitive species causes phytotoxicity, and label prohibitions on tank-mixing with sulfur exist for the same reason.
Fertilizer salt injury presents as marginal leaf scorch identical in appearance to drought scorch, so the diagnosis rests on application history and soluble salt measurement.
Legacy urban soil contaminants such as lead are primarily a human exposure issue rather than a tree health issue, which changes the recommendation from tree treatment to site management.
Last updated: September 2026
The final Abiotic Disorders task asks the arborist to diagnose and evaluate chemical stress and pollution injury . The outline's own list is broad: herbicides, miticides, insecticides, fungicides, antibiotics, heavy metals, plant growth regulators, antidesiccants, oils, soaps, fertilizers, surfactants, spreaders and spreader-stickers, inert ingredients, and air pollution. Herbicide phytotoxicity and de-icing salt are covered elsewhere in this guide; this section covers the rest.
Plant Growth Regulators
Paclobutrazol and flurprimidol are triazole and pyrimidine gibberellin-biosynthesis inhibitors . By blocking the synthesis of gibberellic acid, they suppress internode elongation. In arboriculture they are applied as a soil drench, soil injection, or basal trunk application and are taken up by roots and translocated in the xylem.
Legitimate uses include reducing shoot elongation between utility line-clearance cycles, reducing the frequency of clearance pruning, and improving stress tolerance in some situations through the associated reduction in leaf area and increase in root-to-shoot ratio.
The concentration trap is explicitly named in the ISA outline. These active ingredients are marketed in different concentrations — an 8 percent formulation and a 22.3 percent formulation, for example. A rate that is correct for one product is an overdose or an underdose for the other. Because the material is persistent in soil and is taken up over a season or more, an overdose is not correctable within the season.
Overdose symptoms:
- Extremely short internodes producing a compressed, tufted shoot habit;
- Undersized, thickened, unusually dark green leaves;
- Persistent suppression across multiple growing seasons, because the residue remains active in the soil;
In severe cases, distorted growth and dieback.
Diagnostic rule: uniform, whole-tree dwarfing with dark thickened foliage and no pathogen signs, in a tree under utility or municipal management, should raise a PGR question and prompt a review of the application record.
Distinguish these from ethylene-based growth regulators and from sprout inhibitors, and from antitranspirants and antidesiccants (film-forming polymer emulsions applied to foliage to reduce winter desiccation), which can themselves cause injury by trapping heat or by being applied at temperatures outside the label range.
Adjuvants, Oils, Soaps and Inert Ingredients
Adjuvants are added to spray mixtures to improve performance and are a real and under-recognized source of phytotoxicity.
Material Function Injury mechanism
Surfactants / spreaders Reduce surface tension so the spray wets the leaf Excessive rate strips cuticular wax; marginal and interveinal necrosis
Spreader-stickers Improve retention and rainfastness As above; may extend contact time of a phytotoxic active
Crop oil concentrate / horticultural oil Smother pests; improve penetration Phytotoxicity at high temperature, in drought stress, at high humidity slowing evaporation, or on sensitive species
Insecticidal soap Disrupts soft-bodied pest cuticle Leaf burn on sensitive species and in strong sunlight
"Inert" ingredients Carriers, solvents, emulsifiers Not biologically inert; solvents in particular can be phytotoxic
Horticultural oil is the most common source of adjuvant phytotoxicity in tree care. Standard cautions: do not apply above the temperature ceiling on the label; do not apply to drought-stressed plants; do not apply when foliage will not dry promptly; observe the label's minimum interval before or after sulfur applications, because the combination is phytotoxic; and observe named sensitive species, which commonly include blue-needled conifers where oil strips the glaucous bloom, along with maples, redbud, and others listed on the label.
Insecticides, miticides, fungicides and antibiotics applied as trunk injections deserve separate mention: injection is a wounding technique, and repeated injection at the same points produces cumulative internal injury and decay columns. Prescription of an injection program should account for the wounding cost across the expected treatment horizon.
Fertilizer Salt Injury
Fertilizers are salts. Over-application, application to dry soil, or application without irrigation raises the soluble salt concentration in the root zone, lowering soil osmotic potential and producing physiological drought : the root cannot draw water from a solution more concentrated than its own tissue.
Symptom: marginal leaf scorch progressing inward, indistinguishable in appearance from drought scorch or from de-icing salt injury.
Diagnosis rests on application history plus measured soluble salts (electrical conductivity of a saturated paste extract), not on symptom appearance.
Foliar burn from a granular product landing on wet foliage is a separate, immediate contact injury.
Remediation is leaching with sufficient irrigation where drainage permits, which is only possible if the site drains.
Heavy Metals and Soil Contamination
Urban soils commonly carry legacy contaminants: lead from paint and leaded fuel near roadways and old structures, zinc and cadmium from galvanized materials and tyre wear, copper from treated timber and fungicides, arsenic from historic orchard sprays and CCA-treated wood, and petroleum hydrocarbons from fuel and lubricant spills.
The professionally important point is that most established trees tolerate levels of metals that are unacceptable for human exposure. Phytotoxicity in trees is uncommon except at gross contamination levels. What changes is the site management recommendation :
Screening soil where site history suggests contamination, particularly before recommending a site for edible production or a children's play area;
Managing exposure with mulch and turf cover to prevent dust and direct soil contact;
Recognizing that trees may be part of a phytoremediation or, more commonly, a phytostabilization strategy — using cover and root systems to stabilize contaminated soil rather than to remove the contaminant.
Copper phytotoxicity in the rhizosphere and boron toxicity from reclaimed water are the two genuine tree-health metal and micronutrient toxicities most commonly encountered.
Air Pollution Injury
Pollutant Typical source Characteristic injury Notably sensitive taxa
Ozone (O₃) Secondary; formed from NOx and volatile organics in sunlight Fine stipple or fleck on the upper leaf surface between veins; bronzing; premature senescence; cumulative over the season Eastern white pine, black cherry, tulip poplar, green ash, milkweed as an indicator
Sulfur dioxide (SO₂) Combustion of sulfur-containing fuels Interveinal bleaching or necrosis, often bifacial; needle tip necrosis in conifers White pine, larch, many lichens as bioindicators
Nitrogen oxides (NOx) Combustion, vehicle exhaust Interveinal necrosis; contributes to ozone formation Broadly
Peroxyacyl nitrates (PAN) Secondary photochemical Glazing, silvering or bronzing of the lower leaf surface Herbaceous plants strongly; some woody species
Fluoride Industrial point sources Tip and marginal necrosis with a sharp reddish-brown band separating live from dead tissue Conifers, gladiolus as an indicator
Particulates (PM₁₀, PM₂.₅) Traffic, construction, industry Physical occlusion of stomata; reduced light interception; dust favours mite outbreaks Broadly
Two exam-relevant discriminators. Upper-surface stipple points to ozone; lower-surface glazing points to PAN. And air pollution injury characteristically appears across multiple unrelated species in a corridor or downwind of a source, following the exposure gradient rather than any taxonomic pattern — which is the single best way to separate it from a biotic disease.
The Differential Discipline
Chemical injury is a diagnosis of pattern and history, and there is no laboratory test for most of it.
Map the affected population. Multiple unrelated species affected together points to abiotic; one species affected points to biotic or to a species-specific sensitivity.
Map the geometry. A sharp line, a directional gradient, a spray boom height, a drip line under an irrigation head, a downwind plume — these are physical distributions, not biological ones.
Establish the timeline and obtain records. Pesticide application records, fertilizer records, PGR records, and irrigation water quality reports resolve most cases.
Confirm the absence of signs. Abiotic disorders produce symptoms only. Secondary organisms will colonize chemically injured tissue, so the presence of a sign does not exclude a chemical cause, but their absence strongly supports it.