Study guide

5.2 Biotic Tree Pathogens: Wood Decay Fungi, Vascular Wilts & Cankers

ISA Board Certified Master Arborist BCMA

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: The BCMA Exam & How to Prepare

1.1 The BCMA Exam: Format, Eligibility, Fees & the Current Content Outline

2 Chapter 2: Tree Biology, Physiology & Anatomy

2.1 Cellular Anatomy, Meristems, Vascular Architecture & Secondary Growth 2.2 Photosynthesis, Respiration & Carbohydrate Allocation Dynamics 2.3 CODIT (Compartmentalization of Decay in Trees) & Reaction Wood 2.4 Tree Life Stages, Decline Spirals, Veteran Tree Management & Propagation

3 Chapter 3: Soil Science, Soil Chemistry & the Rhizosphere

3.1 Soil Physical Properties, Texture, Structure & Bulk Density 3.2 Soil Chemistry: Cation Exchange Capacity (CEC), pH & Salinity 3.3 The Rhizosphere, Soil Food Web & Mycorrhizal Relationships 3.4 Urban, Disturbed & Engineered Soils: Structural Soils and Suspended Pavement 3.5 Soil–Water Interactions: Drainage Diagnosis, Perched Water & Remediation Design

4 Chapter 4: Abiotic Disorders & Tree Nutrition

4.1 Abiotic Environmental Stresses: Moisture, Temperature & Chemical Injury 4.2 Mechanical Injury, Hardware Damage, Root Defects & Lightning Injury 4.3 Chemical Stress Beyond Herbicides: Growth Regulators, Adjuvants, Salts, Metals & Air Pollutants 4.4 Essential Nutrients, Deficiencies, Toxicities & Element Mobility

5 Chapter 5: Biotic Disorders: Pathogens, Pests & Tree Defense

5.1 The Disease Triangle, Disease Cycles & Pest Life Cycles 5.2 Biotic Tree Pathogens: Wood Decay Fungi, Vascular Wilts & Cankers 5.3 Arthropod Pests: Feeding Guilds, Signs, Symptoms & Field Recognition 5.4 Tree Defense Responses to Biotic Injury: Constitutive, Induced & Structural

6 Chapter 6: Plant Identification, Selection & Urban Ecology

6.1 Dendrological Classification, Botanical Nomenclature & Morphological Keys 6.2 Species-Site Matching, Environmental Tolerances & Urban Forest Ecology 6.3 Ecological Interactions & Climate-Adaptive Selection: Succession, Allelopathy & Assisted Migration

7 Chapter 7: Systematic Arboricultural Diagnosis

7.1 The Systematic 5-Step Diagnostic Protocol & Clinical Signs vs Symptoms 7.2 Field Sampling Protocols, Laboratory Testing & Diagnostic Data Interpretation 7.3 Advanced Diagnostic Testing: Resistance Drilling, Sonic Tomography & Pulling Tests

8 Chapter 8: ANSI A300 Pruning Standards & Canopy Architecture

8.1 Biological Response to Pruning, Branch Anatomy & ANSI A300 Pruning Cuts 8.2 Structural Pruning of Young and Developing Trees: Architecture & Subordination 8.3 Mature Tree Canopy Management: Dosage Limits, Methods & Specialty Pruning 8.4 Pruning Tools, Sanitation & Writing Enforceable Pruning Specifications

9 Chapter 9: Plant Health Care (PHC) & Integrated Pest Management

9.1 Plant Health Care Concepts, Phenological Monitoring & Action Thresholds 9.2 Biological Controls, Cultural Management Tactics & Mechanical Interventions 9.3 Chemical Tactics, Modes of Action, Application Methods & Pollinator Protection

10 Chapter 10: Soil Treatment, Water Relations, Planting & Transplanting

10.1 Soil Compaction Remediation: Pneumatic Excavation, Vertical Mulching & Amendments 10.2 Tree Water Relations, Transpiration Dynamics, Moisture Sensing & Irrigation Design 10.3 Nursery Stock Evaluation, Planting Depth, Root Preparation & ANSI A300 Part 6 10.4 Transplanting Established Trees: Advance Root Pruning, Tree Spades & Post-Planting Care

11 Chapter 11: Support Systems, Lightning Protection, Climbing, Rigging & Removal

11.1 Tree Support Systems: Dynamic vs Static Cabling, Bracing Rods & Guying (ANSI A300 Part 3) 11.2 Tree Lightning Protection Systems: Theory, Components & Installation (ANSI A300 Part 4) 11.3 Climbing Systems (SRS/MRS), Rigging Physics, Vector Forces & Controlled Removal 11.4 Tree Removal Work Planning: Site Assessment, Method Selection & Traffic Control

12 Chapter 12: Tree Risk Assessment & Management

12.1 Tree Risk Assessment Framework: Levels 1, 2, and 3 (ISA BMP & TRAQ) 12.2 Likelihood of Failure, Likelihood of Impact & ISA Risk Matrix Rating 12.3 Risk Mitigation Alternatives, Residual Risk & Client Communication 12.4 Risk Reporting, Documentation, Inspection Cycles & Programmatic Risk Management

13 Chapter 13: Plant Appraisal (CTLA) & Valuation Methodologies

13.1 Principles of Plant Appraisal (CTLA 10th Ed): Cost, Sales & Income Approaches 13.2 The Trunk Formula Technique (TFT): Formulas, Depreciation & Unit Costs 13.3 Appraisal Casework: Casualty Loss, Eminent Domain, Trespass & Defensibility

14 Chapter 14: Trees & Construction

14.1 Pre-Construction Planning: Tree Surveys, Preservation Plans & Suitability 14.2 Tree Protection Zones (TPZ), Critical Root Zones (CRZ) & Barrier Protocols 14.3 Pre-Construction Treatment Prescriptions & Clearance Preparation 14.4 Construction Impact Monitoring, Engineering Alternatives & Post-Care

15 Chapter 15: Tree Inventories & Urban Forest Management Plans

15.1 Urban Forest Inventories, GIS Mapping & Strategic Management Plans 15.2 Implementing the Urban Forest Management Plan: Service Levels, Budgeting, Ordinances & Performance Metrics

16 Chapter 16: Worker Safety & ANSI Z133

16.1 ANSI Z133 Safety Standards: Job Briefings, PPE, Drop Zones & Chipper Safety 16.2 Electrical Hazards: Minimum Approach Distances (MAD) & Emergency Protocols 16.3 Chain Saw Safety, Work Positioning Aloft & Aerial Rescue Readiness 16.4 Tool, Rope & Equipment Inspection, Maintenance and Retirement Criteria 16.5 Safety Program Management: Training, Competency, Emergency Response & Incident Investigation

17 Chapter 17: Business Relations, Law & Professional Ethics

17.1 ISA Code of Ethics, Legal Liability, Boundary Trees & Expert Testimony 17.2 Contracts, Proposals, Specifications & Business Operations 17.3 Regulatory Compliance: Licensing, Pesticide Law, Employment & Environmental Restrictions

5.2 Biotic Tree Pathogens: Wood Decay Fungi, Vascular Wilts & Cankers

Key Takeaways Explain This Topic AI

White rot fungi enzymatically degrade both lignin and cellulose, leaving wood bleached, soft, and fibrous while preserving residual ductile bending flexibility prior to failure.

Brown rot fungi selectively hydrolyze cellulose and hemicellulose via non-enzymatic Fenton reactions, causing a 50–70% loss of bending strength at early stages (<10% weight loss) and predisposing trees to sudden brittle snap-buckling.

Kretzschmaria deusta produces carbonaceous black crusts and degrades cell walls through a micro-cavity soft-rot mechanism, resulting in catastrophic brittle ceramic fractures without fiber pull-out.

Bretziella fagacearum causes rapid vascular occlusion and leaf shed in red oaks within weeks, transmitting subterraneanly through root grafts across distances exceeding 15–20 meters.

Xylella fastidiosa is a xylem-limited bacterium vectored by sharpshooters, producing marginal leaf scorch separated from healthy green tissue by a distinct chlorotic or reddish-brown halo.

Last updated: September 2026

Biotic pathogens represent significant biological agents of structural failure, physiological decline, and mortality in urban and forest trees. Understanding how pathogens degrade secondary xylem, disrupt vascular transport, or destroy meristematic tissues is vital for tree risk assessment, Plant Health Care (PHC), and structural stability diagnosis.

Wood Decay Fungal Biology and Structural Failure Mechanics

Secondary xylem (wood) is constructed of three primary structural polymers:

Cellulose : Linear chains of β-(1,4)-D-glucan assembled into crystalline microfibrils providing immense tensile strength parallel to the grain.

Hemicellulose : Heterogeneous, branched polysaccharides (e.g., xylans, glucomannans) that cross-link cellulose microfibrils to the lignin matrix.

Lignin : A complex, three-dimensional, amorphous aromatic polymer constructed of phenylpropane units (coniferyl, sinapyl, and p-coumaryl alcohols) that encases the carbohydrate framework, providing compressive stiffness , shear strength, and chemical recalcitrance against enzymatic digestion.

Wood-decaying Basidiomycota and Ascomycota employ fundamentally different enzymatic and physiological strategies that dictate macroscopic wood appearance and biomechanical failure modes. WOOD CELL WALL POLYMERS & DECAY PATHWAYS

  • ┌────────────────────────────────────────────────────────┐
  • │ Intact Wood Matrix │
  • │ [Cellulose (Tensile)] + [Lignin (Compressive/Shear)] │
  • └───────────────────────────┬────────────────────────────┘
  • │
  • ┌───────────────────────┴───────────────────────┐
  • ▼ ▼
  • WHITE ROT FUNGI BROWN ROT FUNGI
  • (e.g., Ganoderma, Trametes) (e.g., Laetiporus, Phaeolus)
  • │ │
  • Degrades BOTH Lignin & Cellulose Hydrolyzes Cellulose & Hemicellulose
  • (Enzymatic: Laccase, Peroxidases) (Non-enzymatic Fenton Reaction: OH•)
  • │ │
  • ▼ ▼
  • Wood: Bleached, Spongy, Fibrous Wood: Dark Brown, Cubical Checking
  • │ │
  • ▼ ▼

BIOMECHANICAL FAILURE MODE: BIOMECHANICAL FAILURE MODE:

  • Ductile Bending Warning Catastrophic Brittle Snap
  • (Splintering, groaning, shear) (Instant snap-buckling, no warning)
  • White Rot Fungi: Simultaneous vs. Selective Delignification

White rot fungi possess specialized oxidative enzymes—including laccases , lignin peroxidases (LiP), and manganese peroxidases (MnP)—alongside cellulolytic endoglucanases, cellobiohydrolases, and β-glucosidases.

Simultaneous White Rot (e.g., Ganoderma applanatum , Trametes versicolor , Fomes fomentarius ): Fungi concurrently metabolize lignin, hemicellulose, and cellulose at equal rates. Wood progressively bleaches, loses density, and transforms into a soft, spongy, fibrous, or laminated mass.

Selective Delignification (e.g., Phellinus igniarius , Inonotus dryadeus ): Lignin and hemicellulose are enzymatically stripped away before cellulose is substantially attacked, leaving behind pockets or sheets of pure white, cellulose-rich fibers.

Biomechanical Failure Characteristics : Because cellulose microfibrils are preserved or degraded gradually in parallel with lignin, wood decayed by white rot fungi retains ductile bending strength and plasticity. Under wind loading, white-rotted stems undergo substantial elastic and plastic deformation, exhibiting audible fiber groaning, longitudinal shear, and fibrous splintering before ultimate failure. Trees with white rot provide structural warnings prior to collapse.

Brown Rot Fungi: Destructive Cellulose Hydrolysis and Brittle Failure

Brown rot fungi (e.g., Laetiporus sulphureus [chicken-of-the-woods], Phaeolus schweinitzii [velvet-top fungus], Fomitopsis pinicola [red-belted conk], Fomitopsis betulina [birch polypore]) selectively target the carbohydrate fraction (cellulose and hemicellulose), leaving the aromatic lignin structure largely intact, though chemically modified (demethylated).

Mechanism of Depolymerization : Because large enzyme complexes cannot diffuse through the tight pores of intact lignified cell walls, brown rot fungi deploy low-molecular-weight reactive oxygen species via non-enzymatic Fenton reactions : Fe 2 + + H 2 O 2 + H + → Fe 3 + + OH ∙ + H 2 O \text{Fe}^{2+} + \text{H}_2\text{O}_2 + \text{H}^+ \rightarrow \text{Fe}^{3+} + \text{OH}^\bullet + \text{H}_2\text{O} Fe 2 + + H 2 ​ O 2 ​ + H + → Fe 3 + + OH ∙ + H 2 ​ O

Hydroxyl free radicals (OH•) diffuse rapidly through cell walls, cleaving crystalline cellulose microfibrils into fragments.

Physical Signature : Wood turns dark reddish-brown, dries out, and undergoes severe shrinkage along radial and tangential planes, cracking into characteristic rectangular and cubical blocks—a condition termed cubical brown rot . The remaining wood has zero fiber cohesion and can be pulverized into powder between fingers.

Biomechanical Failure Characteristics : Brown rot is exceptionally hazardous in tree risk assessment. Cleavage of cellulose chains causes rapid, catastrophic loss of tensile and bending strength at the earliest stages of infection. Laboratory testing demonstrates that less than 10% wood weight loss from brown rot causes a 50% to 70% reduction in bending strength . Stems and roots colonized by brown rot fungi fail through sudden, brittle snap-buckling without prior ductile deformation or external signs of distress.

Soft Rot Fungi: Micro-Cavities in Secondary Cell Walls

Soft rot fungi (predominantly Ascomycota and Deuteromycota, such as Chaetomium , Ceratocystis , and Phialophora ) tolerate high moisture levels, low oxygen, and high extractives where Basidiomycetes cannot thrive. Hyphae penetrate the secondary cell wall (S₂ layer), excavating microscopic helical cavities parallel to the microfibril angle. Soft rot causes superficial softening in wet environments or, in specialized cases, deep structural brittleness.

Major Butt and Root Rot Indicators & High-Risk Fungi

Armillaria mellea complex (Honey Fungus):

Pathogenic root and collar rot attacking conifers and broadleaf trees.

Signs: Sub-cortical white, fan-shaped mycelial plaques beneath bark smelling of fresh mushrooms; dark brown-to-black melanized rhizomorphs ("shoestrings") traversing soil and root surfaces; clusters of honey-colored gilled mushrooms at trunk bases in autumn.

Failure Mode: Decays anchoring buttress roots and girdles cambium, leading to tree uprooting in moderate winds.

Kretzschmaria deusta (formerly Hypoxylon deustum , Brittle Cinder):

Severe pathogen of mature hardwoods ( Fagus , Acer , Tilia , Fraxinus ).

Signs: Early stage forms wavy grey-white crusts with white margins in spring; matures into flat, dull black, carbonaceous crusts resembling burnt charcoal adhered tightly to bark fissures at the root collar.

Mechanism: Degrades cell walls via a unique combination of soft-rot cavity formation and white-rot delignification, completely destroying the lignin-cellulose matrix.

Failure Mode: Causes brittle ceramic fracture (porcelain fracture). Wood snaps cleanly across the grain with zero splintering or fiber pull-out. Because trees maintain full, vigorous green crowns while root flares are severely compromised, Kretzschmaria deusta is among the most deceptive and lethal structural hazards in arboriculture.

Inonotus dryadeus (Warted Oak Polypore):

Parasitizes mature oaks ( Quercus spp.) and occasionally sweetgum.

Signs: Large, thick, cushion-like bracket conks at the root flare that weep amber liquid droplets when actively growing; turning dark brown/black with age.

Failure Mode: Progressive white rot of the underside of structural buttress roots, causing whole-tree overturn while leaving the upper root collar visually sound.

Ganoderma applanatum (Artist's Conk) vs. Ganoderma sessile / G. curtisii :

G. applanatum : Perennial woody bracket with white pore surface that bruises brown; causes extensive white mottled heart rot and butt rot.

G. sessile : Annual reddish-brown lacquered shelf; rapidly degrades sapwood and buttress roots in urban hardwoods.

Vascular Wilt Diseases

Vascular wilts represent systemic infections where fungal hyphae and microconidia colonize xylem vessel elements. The host tree responds by producing tyloses (balloon-like outgrowths of xylem parenchyma into vessel lumens) and polyphenolic gums to seal off the invader. However, widespread occlusion of xylem vessels cuts off transpirational water flow, causing irreversible vascular wilt.

Bretziella fagacearum (Oak Wilt)

Taxonomy : Formerly Ceratocystis fagacearum .

Host Differential :

Red Oak Group (Section Lobatae: Q. rubra, Q. velutina, Q. palustris) : Highly susceptible. Infection spreads systemically within weeks. Foliage wilts, turns dull bronze-green, and abscises from the crown down while leaves are still partially green. Sub-cortical fungal mats (endoconidiophores) form under bark, producing pressure cushions that crack the bark and emit a sweet, fruity odor attracting vectors. Mortality occurs in 4–8 weeks.

White Oak Group (Section Quercus: Q. alba, Q. macrocarpa) : Moderately resistant. Vessel anatomy allows rapid, localized tylosis formation that compartmentalizes the pathogen into individual branches. Infection causes chronic "flagging" and branch dieback over multiple seasons; trees often survive.

Transmission Pathways :

Root Grafts : Accounts for 90% of localized mortality in contiguous stands. Functional vascular connections between adjacent oaks of the same group transport fungal spores up to 15–20 meters. Control mandates trenching to 1.2–1.5 m (4–5 ft) deep or vibratory plowing outside the buffer zone prior to tree removal.

Insect Vectors : Nitidulid sap beetles ( Colopterus , Carpophilus ) attracted to sweet fungal mats carry conidia to fresh spring pruning wounds. ANSI A300 Part 1 explicitly prohibits non-emergency oak pruning during peak beetle flight periods (spring/early summer).

Ophiostoma novo-ulmi (Dutch Elm Disease - DED)

Host : Ulmus species ( U. americana highly susceptible; Asian species U. pumila , U. parvifolia resistant).

Vectors : European elm bark beetle ( Scolytus multistriatus ) and native elm bark beetle ( Hylurgopinus rufipes ). Beetles emerging from brood galleries beneath diseased bark carry sticky conidia and feed in the 2- to 4-year-old twig crotches of healthy elms.

Symptomology : Early "flagging" of a single upper branch (yellowing, curling, browning of leaves), progressing to vascular collapse of the entire crown. Diagnostic sign: distinct dark brown streaking in current-season sapwood rings observed upon peeling bark.

Management : Macro-infusion of systemic triazole fungicides (e.g., propiconazole) into root flare sapwood; sanitation removals; barrier trenching.

Verticillium dahliae / V. albo-atrum (Verticillium Wilt)

Etiology : Soil-borne fungal pathogen surviving for decades as durable microsclerotia. Enters roots through natural openings or wounds; colonizes xylem vessels.

Host Range : Broad host range affecting >300 dicotyledonous species ( Acer , Fraxinus , Cotinus , Catalpa , Liriodendron , Tilia ). Notably immune: all gymnosperms (conifers), monocots, and certain hardwoods ( Betula , Quercus , Juglans , Platanus , Cornus ).

Diagnostic Signs : Subacute to chronic crown thinning; rapid wilting of isolated branch sections; pathognomonic olive-green to greenish-brown vascular discoloration in sapwood of maples (brown in other species).

  • Canker Pathogens and Bacterial Infections
  • Canker Dynamics: Diffuse vs. Perennial Target Cankers

A canker is a localized necrotic lesion of the bark, phloem, and vascular cambium:

Perennial / Target Cankers ( Neonectria ditissima , Eutypella parasitica ): A multi-year host-pathogen conflict. In the dormant season, the fungus expands through cambial tissue. In the growing season, the tree produces defensive callus rolls to wall off the pathogen. This seasonal alternation produces concentric, raised callus rings resembling a target or bullseye.

Diffuse Cankers ( Cryphonectria parasitica [Chestnut Blight], Geosmithia morbida [Thousand Cankers Disease of Walnut]): Virulent pathogens or severely stressed hosts where fungal growth outpaces host compartmentalization. Necrosis expands rapidly without callus formation, girdling the branch or trunk in a single season.

Facultative Stress Cankers ( Botryosphaeria dothidea , Biscogniauxia atropunctata ): Endophytic or weak parasites that switch to aggressive pathogenesis when host xylem water potential drops below -1.5 to -2.0 MPa during severe drought.

Bacterial Pathogens

Erwinia amylovora (Fire Blight) :

Affects Rosaceae ( Malus , Pyrus , Crataegus , Sorbus , Amelanchier ).

Bacteria overwinter in canker margins. In spring, warm, humid weather stimulates bacterial exudation ("bacterial ooze"). Pollinating insects transfer bacteria to floral nectaries.

Rapid downward migration through vascular traces causes scorched, blackened leaves that remain attached to twigs, with terminal shoots wilting into a classic hooked shepherd's crook .

Sanitation pruning requires cutting at least 20–30 cm (8–12 in) into healthy wood below visible necrosis, sterilizing tools between cuts.

Xylella fastidiosa (Bacterial Leaf Scorch - BLS) :

Fastidious, xylem-limited bacterium vectored by sharpshooter leafhoppers ( Cicadellidae ) and spittlebugs ( Cercopoidea ).

Causes marginal foliar necrosis on mature urban trees ( Quercus palustris , Quercus rubra , Platanus occidentalis , Acer rubrum ).

Characteristic Sign: Marginal scorch is demarcated from healthy green tissue by a distinct, vibrant yellow or reddish-brown chlorotic halo . Symptoms emerge in late summer and intensify annually, moving basipetally.

Phytoplasmas (Lethal Yellowing) :

Specialized, wall-less bacteria inhabiting phloem sieve tubes. Candidatus Phytoplasma palmae affects Arecaceae (coconuts, date palms), vectored by the planthopper Haplaxius crudus .

Induces premature fruit drop, blackened flower inflorescence necrosis, progressive foliar yellowing from lower to upper fronds, and fatal collapse of the central spear leaf.

Comparative Wood Decay Fungal Matrix

Fungal Organism Decay Category Primary Host Species Structural Component Targeted Macroscopic Wood Appearance Typical Failure Mode & Hazard Rating

Laetiporus sulphureus Brown Cubical Rot Quercus , Robinia , Prunus , Eucalyptus Cellulose & hemicellulose (Fenton hydroxyl radicals) Dark reddish-brown, checked into brittle cubes; pulverizes Extreme : Catastrophic brittle snap of trunk/limbs without warning; high risk.

Phaeolus schweinitzii Brown Cubical Butt Rot Pseudotsuga , Pinus , Picea , Larix Cellulose & hemicellulose in buttress roots Brown cubical decay concentrated in root collar and taproot Extreme : Sudden basal shear or whole-tree overturn in wind; minimal fiber pull.

Kretzschmaria deusta White / Soft Rot Complex Fagus , Acer , Tilia , Fraxinus , Aesculus Simultaneous lignin & cellulose; S₂ wall microcavities Bleached, zone lines, black carbonaceous crusts externally Extreme : Brittle ceramic fracture at ground line; snap occurs with healthy green canopy.

Ganoderma applanatum White Mottled Rot Acer , Fagus , Populus , Quercus Lignin and cellulose simultaneously White, bleached, soft, spongy or fibrous; dark rind lines Moderate to High : Progressive ductile bending failure; stems splinter over time.

Trametes versicolor White Rot Hardwood slash, wounded sapwood Lignin and cellulose concurrently Bleached, soft, stringy, flexible wood Low to Moderate : Primarily sapwood decay; ductile failure if structural sapwood compromised.

Armillaria mellea White Rot & Collar Rot Broadleaves and conifer root collars Lignin and carbohydrates; cambial killer Spongy, wet, stringy white rot; white mycelial fans High : Anchoring root failure and windthrow; root collar collapse.

Inonotus dryadeus White Pocket Butt Rot Mature Quercus species Lignin selectively, then cellulose Soft, bleached white pockets; weeping conk High : Progressive degradation of underside of buttress roots; windthrow.