Study guide

11.3 Climbing Systems (SRS/MRS), Rigging Physics, Vector Forces & Controlled Removal

ISA Board Certified Master Arborist BCMA

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: The BCMA Exam & How to Prepare

1.1 The BCMA Exam: Format, Eligibility, Fees & the Current Content Outline

2 Chapter 2: Tree Biology, Physiology & Anatomy

2.1 Cellular Anatomy, Meristems, Vascular Architecture & Secondary Growth 2.2 Photosynthesis, Respiration & Carbohydrate Allocation Dynamics 2.3 CODIT (Compartmentalization of Decay in Trees) & Reaction Wood 2.4 Tree Life Stages, Decline Spirals, Veteran Tree Management & Propagation

3 Chapter 3: Soil Science, Soil Chemistry & the Rhizosphere

3.1 Soil Physical Properties, Texture, Structure & Bulk Density 3.2 Soil Chemistry: Cation Exchange Capacity (CEC), pH & Salinity 3.3 The Rhizosphere, Soil Food Web & Mycorrhizal Relationships 3.4 Urban, Disturbed & Engineered Soils: Structural Soils and Suspended Pavement 3.5 Soil–Water Interactions: Drainage Diagnosis, Perched Water & Remediation Design

4 Chapter 4: Abiotic Disorders & Tree Nutrition

4.1 Abiotic Environmental Stresses: Moisture, Temperature & Chemical Injury 4.2 Mechanical Injury, Hardware Damage, Root Defects & Lightning Injury 4.3 Chemical Stress Beyond Herbicides: Growth Regulators, Adjuvants, Salts, Metals & Air Pollutants 4.4 Essential Nutrients, Deficiencies, Toxicities & Element Mobility

5 Chapter 5: Biotic Disorders: Pathogens, Pests & Tree Defense

5.1 The Disease Triangle, Disease Cycles & Pest Life Cycles 5.2 Biotic Tree Pathogens: Wood Decay Fungi, Vascular Wilts & Cankers 5.3 Arthropod Pests: Feeding Guilds, Signs, Symptoms & Field Recognition 5.4 Tree Defense Responses to Biotic Injury: Constitutive, Induced & Structural

6 Chapter 6: Plant Identification, Selection & Urban Ecology

6.1 Dendrological Classification, Botanical Nomenclature & Morphological Keys 6.2 Species-Site Matching, Environmental Tolerances & Urban Forest Ecology 6.3 Ecological Interactions & Climate-Adaptive Selection: Succession, Allelopathy & Assisted Migration

7 Chapter 7: Systematic Arboricultural Diagnosis

7.1 The Systematic 5-Step Diagnostic Protocol & Clinical Signs vs Symptoms 7.2 Field Sampling Protocols, Laboratory Testing & Diagnostic Data Interpretation 7.3 Advanced Diagnostic Testing: Resistance Drilling, Sonic Tomography & Pulling Tests

8 Chapter 8: ANSI A300 Pruning Standards & Canopy Architecture

8.1 Biological Response to Pruning, Branch Anatomy & ANSI A300 Pruning Cuts 8.2 Structural Pruning of Young and Developing Trees: Architecture & Subordination 8.3 Mature Tree Canopy Management: Dosage Limits, Methods & Specialty Pruning 8.4 Pruning Tools, Sanitation & Writing Enforceable Pruning Specifications

9 Chapter 9: Plant Health Care (PHC) & Integrated Pest Management

9.1 Plant Health Care Concepts, Phenological Monitoring & Action Thresholds 9.2 Biological Controls, Cultural Management Tactics & Mechanical Interventions 9.3 Chemical Tactics, Modes of Action, Application Methods & Pollinator Protection

10 Chapter 10: Soil Treatment, Water Relations, Planting & Transplanting

10.1 Soil Compaction Remediation: Pneumatic Excavation, Vertical Mulching & Amendments 10.2 Tree Water Relations, Transpiration Dynamics, Moisture Sensing & Irrigation Design 10.3 Nursery Stock Evaluation, Planting Depth, Root Preparation & ANSI A300 Part 6 10.4 Transplanting Established Trees: Advance Root Pruning, Tree Spades & Post-Planting Care

11 Chapter 11: Support Systems, Lightning Protection, Climbing, Rigging & Removal

11.1 Tree Support Systems: Dynamic vs Static Cabling, Bracing Rods & Guying (ANSI A300 Part 3) 11.2 Tree Lightning Protection Systems: Theory, Components & Installation (ANSI A300 Part 4) 11.3 Climbing Systems (SRS/MRS), Rigging Physics, Vector Forces & Controlled Removal 11.4 Tree Removal Work Planning: Site Assessment, Method Selection & Traffic Control

12 Chapter 12: Tree Risk Assessment & Management

12.1 Tree Risk Assessment Framework: Levels 1, 2, and 3 (ISA BMP & TRAQ) 12.2 Likelihood of Failure, Likelihood of Impact & ISA Risk Matrix Rating 12.3 Risk Mitigation Alternatives, Residual Risk & Client Communication 12.4 Risk Reporting, Documentation, Inspection Cycles & Programmatic Risk Management

13 Chapter 13: Plant Appraisal (CTLA) & Valuation Methodologies

13.1 Principles of Plant Appraisal (CTLA 10th Ed): Cost, Sales & Income Approaches 13.2 The Trunk Formula Technique (TFT): Formulas, Depreciation & Unit Costs 13.3 Appraisal Casework: Casualty Loss, Eminent Domain, Trespass & Defensibility

14 Chapter 14: Trees & Construction

14.1 Pre-Construction Planning: Tree Surveys, Preservation Plans & Suitability 14.2 Tree Protection Zones (TPZ), Critical Root Zones (CRZ) & Barrier Protocols 14.3 Pre-Construction Treatment Prescriptions & Clearance Preparation 14.4 Construction Impact Monitoring, Engineering Alternatives & Post-Care

15 Chapter 15: Tree Inventories & Urban Forest Management Plans

15.1 Urban Forest Inventories, GIS Mapping & Strategic Management Plans 15.2 Implementing the Urban Forest Management Plan: Service Levels, Budgeting, Ordinances & Performance Metrics

16 Chapter 16: Worker Safety & ANSI Z133

16.1 ANSI Z133 Safety Standards: Job Briefings, PPE, Drop Zones & Chipper Safety 16.2 Electrical Hazards: Minimum Approach Distances (MAD) & Emergency Protocols 16.3 Chain Saw Safety, Work Positioning Aloft & Aerial Rescue Readiness 16.4 Tool, Rope & Equipment Inspection, Maintenance and Retirement Criteria 16.5 Safety Program Management: Training, Competency, Emergency Response & Incident Investigation

17 Chapter 17: Business Relations, Law & Professional Ethics

17.1 ISA Code of Ethics, Legal Liability, Boundary Trees & Expert Testimony 17.2 Contracts, Proposals, Specifications & Business Operations 17.3 Regulatory Compliance: Licensing, Pesticide Law, Employment & Environmental Restrictions

11.3 Climbing Systems (SRS/MRS), Rigging Physics, Vector Forces & Controlled Removal

Key Takeaways Explain This Topic AI

Professional tree climbing relies on Stationary Rope Systems (SRS / SRT) offering 1:1 direct ascent with low canopy friction or Moving Rope Systems (MRS / DdRT) providing 2:1 mechanical advantage; chainsaw operation aloft strictly mandates two independent points of attachment under ANSI Z133.

Rigging anchor points experience severe vector force multiplication: when the load line and lead line run parallel (0° angle) through an overhead block down to a ground lowering device, the anchor experiences up to 200% of the dynamic load (F(anchor) = 2 × F(load)).

Kinetic energy developed during sectional dropping (Ep = m · g · h) creates massive dynamic impact spikes; using trunk-mounted friction devices (Port-a-Wrap, GRCS) and allowing dynamic rope slip dissipates shock loads that would otherwise cause structural anchor failure.

Technical tree felling hinges on precise notch geometry: the open-face notch (70°–90°) keeps the hinge intact until the tree reaches the ground, while a uniform hinge measuring 10% trunk diameter in thickness and 80% in width provides directional guidance; bore cutting avoids hazardous barber-chairing.

Crane-assisted removals require rigorous calculations of green wood weight (W = V × density) and center-of-gravity rigging; dynamic shock-loading of a crane is strictly prohibited by ANSI Z133.

Last updated: September 2026

11.3 Climbing Systems (SRS/MRS), Rigging Physics, Vector Forces & Controlled Removal

Arboricultural climbing, complex rigging, and technical tree dismantling represent the most physically demanding and high-liability operational domains within modern arboriculture. Every ascent, cut, and lowered limb alters structural load paths and subjects biological wood fibers to severe dynamic stresses. For the Board Certified Master Arborist (BCMA), operational mastery requires combining biological structural assessment with the rigorous physics of vector mechanics, material science, and ANSI Z133 Safety Requirements for Arboricultural Operations .

Professional Tree Climbing Systems: SRS vs. MRS

Modern arborists access the canopy using two fundamental rope-based access configurations, each possessing distinct biomechanical advantages, friction dynamics, and anchor force distributions. ROPE CLIMBING SYSTEM ARCHITECTURES

STATIONARY ROPE SYSTEM (SRS / SRT) MOVING ROPE SYSTEM (MRS / DdRT)

  • ( Overhead Canopy TIP ) ( Friction Saver / TIP )
  • o o
  • / \ / \
  • / \ / \
  • / \ / \
  • Canopy Line / \ Basal Anchor / \
  • (Stationary) / \ (Tied to Trunk) / \
  • / \ / \
  • / \ / \
  • [Climber] \ [Climber] \
  • (Ascends 1:1 Directly) \ (Tied to Hitch & (Falling Leg;
  • o Saddle Bridge) Pulled 2:1)
  • [Basal Anchor]
  • 1. Stationary Rope System (SRS / SRT)

In a Stationary Rope System (SRS) —historically termed Single Rope Technique (SRT)—the climbing line remains completely stationary relative to the tree. The line is anchored either at the base of the trunk ( basal anchor ) after passing over an overhead canopy tie-in point (TIP), or directly in the canopy using a specialized canopy anchor.

Ascent and Work Positioning Mechanics: The climber ascends directly up the single static line using mechanical ascent/positioning devices (e.g., ISC Rope Wrench with a friction hitch, Rock Exotica Akimbo, or Petzl Zigzag paired with a Chicane). Ascent efficiency is high (1:1 direct travel); every meter of rope climbed corresponds to one meter of vertical elevation gained.

Friction and Redirects: Because the rope does not move through the canopy union, canopy friction is effectively eliminated . Arborists can establish complex, multi-point redirects throughout the crown without increasing rope drag, enabling rapid lateral work positioning in wide-spreading crowns.

Basal Anchor Force Physics: A critical engineering factor of a basally anchored SRS is that it creates a 2:1 force multiplier on the overhead canopy tie-in point . The downward tension exerted by the climber's body weight (W) on the climbing leg is matched by an equal downward tension (W) on the ground anchor leg. Thus, the overhead branch must support: F overhead TIP = 2 × W climber F_{\text{overhead TIP}} = 2 \times W_{\text{climber}} F overhead TIP ​ = 2 × W climber ​ The arborist must select an overhead TIP significantly more robust than that required for a traditional canopy anchor.

2. Moving Rope System (MRS / DdRT)

In a Moving Rope System (MRS) —traditionally known as Doubled Rope Technique (DdRT)—the climbing line passes over an overhead anchor point (ideally through a ring-and-ring friction saver, pulley saver, or natural crotch) and returns to the climber's saddle.

Mechanical Advantage: One end of the rope is attached to the saddle bridge via a hitch cord or mechanical prusik (e.g., Petzl Zigzag), while the falling leg passes through the friction device. When the climber pulls downward on the falling leg, a 2:1 mechanical advantage is achieved, halving the muscular force required to lift body weight (F = W / 2), though twice as much rope must be pulled through the system.

Canopy Friction and Cambial Protection: Because the rope moves dynamically across the anchor with every movement, natural crotch rigging generates severe friction that burns the vascular cambium and accelerates rope sheath wear. ANSI A300 and Z133 strongly encourage the use of friction savers (cambium savers) to protect tree tissues and ensure predictable hitch friction.

Work-Positioning Lanyards and the Two-Point Attachment Rule

Arborist Saddles: Feature floating waist bridges constructed of high-strength hollow-braid rope or webbing that allow multi-axis pelvic rotation during lateral branch walking.

Fliplines / Lanyards: Work positioning lanyards allow the arborist to stabilize their stance on vertical trunks or scaffolds. When operating a chainsaw aloft, ANSI Z133 mandates the use of a steel-core (wire-core) flipline to provide cut resistance against accidental, momentary chainsaw chain contact.

The Two-Point Attachment Mandate (ANSI Z133): Arborists must be secured with at least two independent points of attachment (e.g., primary climbing system plus a work-positioning lanyard) whenever operating a chainsaw aloft in a tree . A single point of attachment is permitted only during initial ascent or when the arborist can demonstrate that a second point creates a greater operational hazard (e.g., severe entanglement risk during emergency felling).

Rigging Physics, Vector Forces & Dynamic Shock Loading

Tree rigging is the controlled lowering of severed tree sections using ropes, blocks, friction devices, and anchor trees. Because green wood is extremely dense and heavy, rigging operations generate massive dynamic forces that easily exceed structural safety thresholds if not meticulously calculated. VECTOR FORCES ON A RIGGING BLOCK ANCHOR

  • [Overhead Rigging Point]
  • (O)
  • / | \
  • / | \ Angle Between Lines (theta)
  • Load Line / | \ Lead Line to Lowering Device
  • (To Severed / | \ (To Port-a-Wrap at Base)
  • Log) / | \
  • v v v
  • [Load] [Ground Anchor]

Anchor Force Formula: F_anchor = 2 * F_load * cos(theta / 2)

When lines are parallel (theta = 0 deg): F_anchor = 200% of F_load!

The Rigging Vector Force Multiplier

When a rigging line passes through an overhead arborist block (pulley) to lower a log, the total downward force exerted on the rigging anchor point (F(anchor)) is the vector sum of the load line tension (F(load)) and the lead line tension (F(lead)). Assuming friction in the pulley is negligible, F(lead) ≈ F(load).

The resultant anchor force is governed by the vector angle formula: F anchor = 2 × F load × cos ⁡ ( θ 2 ) F_{\text{anchor}} = 2 \times F_{\text{load}} \times \cos\left(\frac{\theta}{2}\right) F anchor ​ = 2 × F load ​ × cos ( 2 θ ​ )

Where θ is the angle between the load line entering the block and the lead line exiting to the ground lowering device.

Parallel Lines (θ = 0°): In standard butt-hitching where the line drops vertically to a trunk-mounted lowering device at the base of the tree, θ ≈ 0°. Because cos(0°) = 1: F anchor = 2 × F load × 1 = 200 % of F load F_{\text{anchor}} = 2 \times F_{\text{load}} \times 1 = 200\% \text{ of } F_{\text{load}} F anchor ​ = 2 × F load ​ × 1 = 200% of F load ​ The anchor point experiences twice the dynamic weight of the falling piece ! A 1,000-lb dynamic load exerts a crushing 2,000-lb downward force on the rigging anchor union.

  • Vector Angle (θ) Vector Factor (2 × cos(θ/2)) Resultant Anchor Load (% of Dynamic Load) Operational Context
  • 0° (Parallel) 2.00 200% Standard lowering; block directly above load; line drops to trunk base
  • 45° 1.85 185% Lead line redirected to adjacent branch union
  • 60° 1.73 173% Moderate redirect angle to secondary anchor tree
  • 90° 1.41 141% Right-angle lead line to distant ground lowering station
  • 120° 1.00 100% Wide bridle configuration; anchor force equals line load
  • 150° 0.52 52% Very wide angle; reduced anchor force
  • 180° (Inline) 0.00 0% Pure straight-line pull; zero net perpendicular vector force
  • Dynamic Shock Loading: Kinetic Energy Conversion

When a severed branch or trunk section free-falls before the rigging line catches it, gravitational potential energy is converted into kinetic energy: E p = m ⋅ g ⋅ h E_p = m \cdot g \cdot h E p ​ = m ⋅ g ⋅ h

Where m is the mass of the wood, g is gravitational acceleration, and h is the vertical fall distance before the rope becomes taut.

When the rope arrests this falling mass, the kinetic energy must be dissipated through work done by the elongation (stretch) of the rigging line, the elastic bending of the tree trunk, and friction across lowering devices: F dynamic peak = m ⋅ g ⋅ h Δ L + m ⋅ g F_{\text{dynamic peak}} = \frac{m \cdot g \cdot h}{\Delta L} + m \cdot g F dynamic peak ​ = Δ L m ⋅ g ⋅ h ​ + m ⋅ g

Where ΔL is the total stopping distance (rope stretch plus tree deflection).

The Catastrophe of the Static Catch: If a non-elastic line is used and the ground crew locks the line rigidly against a bollard without allowing slippage, ΔL approaches zero. A 500-lb log falling just 4 feet can generate an instantaneous dynamic shock load exceeding 6,000 to 8,000 lbs (12 to 16 Gs) , easily snapping rigging blocks, breaking synthetic lines, or catastrophically snapping the top of the tree.

Dynamic Friction Management: Ground crew must manage trunk-mounted friction devices (e.g., Port-a-Wrap, GRCS) to let the piece run —allowing a controlled length of line to slip during deceleration. This extends the stopping distance (increasing ΔL), smoothly dissipating kinetic energy as thermal energy across the friction cylinder and preventing shock-load spikes.

Rope Material Science: Rigging lines utilize high-tenacity polyester (low stretch, high abrasion resistance) or polyester-nylon double braids. High-stretch nylon absorbs dynamic shock well but creates unpredictable rebound, while static ultra-high-molecular-weight polyethylene (Dyneema) possesses near-zero stretch and must never be shock-loaded without dynamic lowering devices.

Sectional Dismantling & Technical Felling Mechanics

Controlled removal requires specialized cutting techniques to steer, orient, and drop heavy timber away from targets.

Advanced Rigging Techniques

Butt-Hitching: The rigging line is tied at the butt (cut face) of a vertical trunk section, passing through an overhead block mounted just below the cut. The severed log drops vertically past the block, generating high dynamic shock loads that require skilled ground friction control.

Tip-Tying: The line is tied at the distal tip of a heavy lateral branch. As the cut progresses, the butt drops while the tip is suspended, inverting the limb into a vertical orientation to thread between tight obstacles.

Balancing: A balancing sling (spider leg) is attached to the branch at its center of gravity. When severed, the limb remains perfectly horizontal in mid-air, allowing the piece to be floated away from delicate rooflines or landscaping.

Speedlining: A tensioned highline cable or synthetic line runs from the upper canopy down to a distant ground anchor. Severed branches are attached via trolleys or carabiners and slid down the line directly to the chipper, completely bypassing obstacles beneath the tree. TECHNICAL FELLING NOTCH ARCHITECTURE

CONVENTIONAL NOTCH (45 deg) OPEN-FACE NOTCH (70-90 deg)

  • /| /|
  • / | <--- Angled Cut / | <--- Angled Top Cut (45-50 deg)
  • / | / |
  • +---+ <--- Flat Base Cut + | <--- Apex (Hinge forms here)
  • | | \ |
  • | H | <--- Hinge (~10% Diameter) \ | <--- Angled Bottom Cut (30-40 deg)
  • | | \|
  • +---+ <--- Back Cut (1-2 in Above) -+-- <--- Back Cut (Level with Apex)
  • [Hinge Closes at 45 deg Fall] [Hinge Guides Fall Completely to Ground]
  • Felling Cuts: Hinge Mechanics and Notch Profiles

Directing a falling tree or trunk section requires creating an engineered mechanical wooden axle known as the hinge .

The Hinge Dimensions:

Thickness: Approximately 10% of the trunk diameter (0.10 × D).

Width (Length): Approximately 80% of the trunk diameter (0.80 × D).

Strict Mandate: Never cut through the hinge wood! The hinge controls the direction, speed, and lateral stability of the falling tree. Severing the hinge releases all mechanical control, predisposing the tree to unpredictable twisting, barber-chairing, or fatal kickback.

Notch Comparisons:

Conventional Notch: Formed by a horizontal lower cut and a 45-degree downward top cut. The back cut is placed 1 to 2 inches (2.5 to 5 cm) above the horizontal notch apex . Limitation: When the tree falls through a 45-degree arc, the notch faces close together, snapping the hinge while the tree is still halfway in the air.

Humboldt Notch: Formed by a horizontal top cut and an upward-angled 45-degree lower cut. Commonly used in timber harvesting to save log volume; back cut placed 1 to 2 inches above the flat cut.

Open-Face Notch (70° to 90° Notch): The modern arboricultural gold standard. Cut with a 45-degree downward top cut and a 45-degree upward bottom cut, creating a wide 70° to 90° opening . The back cut is placed level with the notch apex . Crucial Advantage: Because the notch opening is wide, the hinge remains intact and functional through almost the entire 90-degree fall , guiding the tree precisely all the way until it hits the ground.

Bore Cutting and Barber-Chair Prevention:

When felling heavy forward-leaning trees, the wood along the back of the trunk is under severe tensile stress. If an arborist makes a standard back cut from the rear forward, the tensile stress causes the trunk to fracture vertically up the middle before the cut is completed—an explosive, lethal trunk failure known as a barber-chair .

The Bore Cut (Plunge Cut): The chainsaw bar tip is plunged directly through the center of the trunk behind the intended hinge. The arborist carves the hinge to its precise 10% thickness from the inside out, leaving an intact holding strap of wood at the rear of the trunk . Felling wedges are driven into the cut behind the bar. Finally, the rear holding strap is severed from the outside, releasing the tree cleanly and eliminating barber-chair risk.

Crane-Assisted Tree Removal (ANSI Z133 Requirements)

Using mobile cranes to dismantle hazardous trees eliminates dynamic shock loading and minimizes property impact, but it introduces extreme rigging and hoisting hazards governed by ANSI Z133. CRANE RIGGING AND CENTER OF GRAVITY (CG)

  • [Crane Hook]
  • |
  • v
  • (O)
  • / \
  • / \ <--- Synthetic Choker Slings
  • / \
  • +---------+---------+---------+
  • | | (CG) | | <--- Center of Gravity
  • | * +---------+ * |
  • +-----------------------------+
  • |
  • v <--- Clean Cut (Zero Drop / Zero Shock Load)
  • ===============================
  • Trunk / Parent Stem

Shock Loading Prohibition: Dynamic shock-loading of a crane is strictly prohibited by ANSI Z133. The crane must be attached to the tree section, line tension established, and green wood weight fully accounted for before the arborist completes the final cut. There must be zero free-fall; the severed piece must float cleanly away from the cut face without dropping.

Calculating Green Log Weight: The arborist must calculate the exact green weight (W) of every pick to verify it remains well within the crane's load chart capacity at the specific working radius: W = V × ρ W = V \times \rho W = V × ρ Where V is the volume of the cylinder (V = π · r² · L) and ρ is the green wood density .

Hardwoods (e.g., Oak, Maple, Beech): ρ ≈ 55 to 65 lbs/ft³ (880 to 1,040 kg/m³).

Softwoods (e.g., White Pine, Fir): ρ ≈ 40 to 50 lbs/ft³ (640 to 800 kg/m³).

Example: A 30-inch diameter (2.5 ft diameter, r = 1.25 ft) white oak log measuring 12 feet long has a volume of V = π × (1.25)² × 12 ≈ 58.9 ft³. At 60 lbs/ft³, the pick weighs 58.9 × 60 = 3,534 lbs (plus foliar end-weight).

Rigging Relative to the Center of Gravity (CG):

Slings must always be attached above the center of gravity of the section.

If slings are rigged below the center of gravity, the piece will violently flip upside-down the instant the cut is completed, inducing catastrophic lateral shock loads on the crane boom and crushing the climber against the trunk.

Technical Rigging & Dismantling Comparative Matrix (ANSI Z133)

Rigging / Removal Technique Primary Objective Line & Hardware Configuration Force Multipliers & Dynamic Risks Critical ANSI Z133 Safety Mandate

Butt-Hitching Sectional lowering of upright trunk wood Rigging block mounted below cut; line tied directly to log butt Parallel lines generate up to 200% load on anchor block; extreme dynamic shock loads Ground crew must dynamically run the line; static arrest risks snapping the spar

Tip-Tying Inverting lateral branches through narrow drops Rigging line hitched at distal branch tip; block located overhead Generates pronounced pendulum swing; transfers lever arm forces to parent stem Tag line mandatory to control swing trajectory away from obstacles and climbers

Balancing (Spider Leg) Horizontal lowering over delicate targets Multi-leg bridle hitched precisely at center of gravity (CG) High sling tension if bridle angle > 120°; zero tip drop Rigging block must be positioned plumb over CG before completing cut

Speedline (Highline) Transporting branches across surface hazards Tensioned track line from canopy to distant ground anchor Vector tension in track line escalates rapidly with line sagging under load Track line must not be over-tensioned; use rated pulleys and dampening tag lines

Crane-Assisted Pick Eliminating dynamic shock and surface drop Multi-leg synthetic chokers rigged above center of gravity Dynamic shock loading prohibited; green log weight must not exceed chart Blind picks require dedicated radio or standard hand signals; no shock loading