Study guide
About the ISA CAP Exam (2024 Content Outline)
ISA CAP Certified Automation Professional Exam
Track your progress as you read
Finished sections get a check mark.
1 Introduction
About the ISA CAP Exam (2024 Content Outline)
2 Chapter 1: Feasibility Study — Scoping & Justification
1.1 Business Needs, Scope Definition & Operational Strategies 1.2 Automation Opportunity Assessment & Technology Screening 1.3 Benefit-to-Cost Analysis, Payback & Financial Metrics (NPV, ROI, IRR)
3 Chapter 2: Feasibility Study — Technical Analysis & Risk
2.1 Technical Feasibility Studies & Automation Architecture Alternatives 2.2 Preliminary Risk Assessment, Process Safety & Environmental Constraints 2.3 Preliminary Project Cost Estimating, Scheduling & Resource Requirements
4 Chapter 3: Definition — Requirements & Specifications
3.1 User Requirements Specification (URS) & Stakeholder Analysis 3.2 Functional Requirements Specification (FRS) & Functional Safety Requirements 3.3 Process & Control Strategy Determination (Continuous, Discrete, Batch & Hybrid) 3.4 Automation Boundaries, High-Level System Architecture & Scope Definition
5 Chapter 4: Definition — Safety, Cybersecurity & Cost Baseline
4.1 Regulatory Compliance & Safety Criteria (OSHA PSM, EPA RMP, 21 CFR Part 11) 4.2 Preliminary Security Architecture & Industrial Cyber Threat Assessment (ISA/IEC 62443) 4.3 Baseline Cost Estimating, Financial Justification & Project Viability Analysis
6 Chapter 5: System Design — Control Architecture, Field Devices & Motion
5.1 Control System Architecture Selection: PLC, DCS, SCADA & Hybrid Systems 5.2 Process Instrumentation, Sensor Selection & Analytical Measurement 5.3 Final Control Elements: Control Valves, Actuators & Variable Frequency Drives (VFDs) 5.4 Hazardous Location Classification, Electrical Safety & Enclosures (NEC, NFPA, ATEX/IECEx) 5.5 Discrete Devices, Motor Control, Motion Control & Mechatronics
7 Chapter 6: System Design — Safety Systems & Cybersecurity
6.1 Safety Instrumented Systems (SIS) & Safety Lifecycle (ISA-84 / IEC 61511 / IEC 61508) 6.2 SIL Determination, Verification & Layer of Protection Analysis (LOPA) 6.3 Industrial Cybersecurity by Design: Zones, Conduits & Security Levels (ISA/IEC 62443) 6.4 Hardware/Software Specifications, Procurement & Detailed Engineering Packages
8 Chapter 7: System Design — Networks, Continuous Control & Standards
7.1 Industrial Fieldbuses & Digital Communications (HART, Fieldbus, Profibus, Modbus) 7.2 Industrial Ethernet & Open Protocols (EtherNet/IP, PROFINET, OPC UA, MQTT) 7.3 Continuous Control Strategies: Feedback, Feedforward, Cascade, Ratio & Advanced PID 7.4 Batch Control Architecture, Recipes & Procedural Standards (ISA-88 / S88)
9 Chapter 8: System Design — HMI, Alarms, Enterprise Integration & Data
8.1 Human-Machine Interface (HMI) & High-Performance Graphics Design (ISA-101) 8.2 Alarm Management Lifecycle, Rationalization & Performance (ISA-18.2) 8.3 Enterprise Integration & Manufacturing Operations Management (ISA-95 / S95) 8.4 Data Flow Analysis, Historians, Relational Databases & Reporting
10 Chapter 9: Development — Software Logic & Programming
9.1 IEC 61131-3 Programming Languages: LD, FBD, ST, SFC and Legacy IL 9.2 Discrete Control Logic, Sequencing, State Machines & Interlock Implementation 9.3 Safety Logic Development, Burner Management & Interlock Verification 9.4 Software Configuration Management, Version Control & Change Tracking
11 Chapter 10: Development — Simulation, Tuning & FAT
10.1 Loop Tuning Methodologies & Dynamic Process Response (Ziegler-Nichols, Cohen-Coon, Lambda) 10.2 Simulation, Emulation & Hardware-in-the-Loop (HIL) Verification 10.3 Factory Acceptance Testing (FAT): Planning, Test Protocols, Execution & Punch Lists 10.4 Software Quality Assurance, Code Review & Validation Documentation
12 Chapter 11: Deployment — Installation, Wiring & Pre-Commissioning
11.1 Field Installation Oversight, Wiring Practices, Grounding & Shielding 11.2 Pre-Commissioning Checkout: Cold Loop Checks, Hot Loop Checks & Calibration 11.3 Site Safety Protocols, Lockout/Tagout (LOTO) & Permitting during Deployment 11.4 Installation Punch List Management & Defect Resolution
13 Chapter 12: Deployment — Commissioning, SAT & Turnover
12.1 Site Acceptance Testing (SAT): Execution, Environmental Validation & Variance Management 12.2 Commissioning & Startup Sequencing (Cold/Hot Commissioning & Fluid Runs) 12.3 Cutover Strategies, Legacy System Migration & Contingency Fallback 12.4 System Turnover, Operator/Maintenance Training Delivery & As-Built Documentation
14 Chapter 13: Operation & Maintenance — Diagnostics, Reliability & Training
13.1 Maintenance Strategies: Reactive, Preventive, Predictive & Reliability-Centered (RCM) 13.2 Troubleshooting Methodologies & Root Cause Failure Analysis (RCFA) 13.3 Calibration Management, Proof Testing & SIS Periodic Validation (IEC 61511) 13.4 Spare Parts Strategy, Critical Spares Analysis & Obsolescence Management 13.5 Asset Performance Management (APM) & Overall Equipment Effectiveness (OEE) Tracking 13.6 Training Needs Analysis, Training Delivery & Competency for Automated Systems
15 Chapter 14: Operation & Maintenance — Optimization, MOC, Security & Decommissioning
14.1 Loop Auditing, Process Variability Analysis & Control Optimization 14.2 Management of Change (MOC) Procedures & Software Modification Controls 14.3 Backup, Disaster Recovery & Disaster Recovery Testing for Industrial Systems 14.4 Operational Cybersecurity: Patch Management, Vulnerability Monitoring & Incident Response 14.5 Decommissioning Planning, Asset Retirement & Environmental Disposition
About the ISA CAP Exam (2024 Content Outline)
Key Takeaways Explain This Topic AI
The ISA CAP exam has 175 multiple-choice questions in 4 hours, taken online or at a Meazure Learning test center, and is scored pass/fail.
The 2024 CAP Content Outline weights six domains: Feasibility 12%, Definition 14%, System Design 23%, Development 16%, Deployment 15%, Operation and Maintenance 20%.
The CAP exam fee is US$373 for ISA members and US$467 for non-members, and each retest costs US$164 or US$205.
Candidates with a 4-year technical degree need 5 years (7,500 hours) of automation work; other candidates need 10 years (15,000 hours) plus responsible-charge references.
CAP certification is renewed every three years with 150 professional development points or by exam.
Last updated: October 2026
About the ISA CAP Exam
The Certified Automation Professional (CAP) credential from the International Society of Automation (ISA) recognizes professionals who are responsible for the direction, definition, design, development and application, deployment, documentation and support of systems, software and equipment used in control systems, manufacturing information systems, systems integration and operational consulting. ISA states that the exam assesses whether a candidate has the knowledge and skills needed in the first three years of post-certified work. The facts below come from ISA's CAP, CAP Body of Knowledge, CAP Requirements, Certification Testing, Exam Procedures, Certification FAQ and Recertification pages, checked in October 2026. ISA can change fees and windows, so confirm them on isa.org before you apply.
Exam Format at a Glance
- Item Detail
- Questions 175 multiple-choice questions
- Time 4 hours
Delivery Online from home or office (if the testing environment and computer meet the requirements) or at a Meazure Learning test center
Materials Closed book; for electronic exams, a calculator and any other necessary resources are provided on the computer
Scoring Pass/fail only; ISA sets the pass point with a modified Angoff method and does not report a score
Results Shown on screen at the end of the exam and emailed; a candidate who fails receives the percentage answered correctly in each domain
- Exam window 12 months from the start of the assigned window, with retests allowed for a fee
- The Six Domains of the 2024 CAP Content Outline
ISA built the current exam from the 2024 CAP Content Outline. Survey ratings of importance, frequency and criticality were weighted equally and converted into the domain percentages and item counts below.
- Domain Focus Share Items
- 1. Feasibility Study Identify, scope and justify the automation project 12% 21
2. Definition Identify customer requirements and complete a high-level analysis of the best way to meet them 14% 25
3. System Design Conceptual and detail design of control and information systems, specifications, procurement and construction work packages 23% 40
4. Development Identify, develop and implement software configuration and development requirements, including factory testing 16% 28
- 5. Deployment Field installation, testing and start-up 15% 27
- 6. Operation and Maintenance Prepare and implement the lifecycle strategy 20% 34
- Total 100% 175
Each domain is divided into tasks, and each task lists the knowledge and skills it requires—44 tasks in all. Technical knowledge appears across domains: instrument selection, networks, safety systems and HMI design are listed under System Design, but the same knowledge is needed to develop, deploy and maintain the system.
How This Guide Maps to the Outline
- Guide Chapters CAP Domain
- Chapters 1–2 Domain 1, Feasibility Study
- Chapters 3–4 Domain 2, Definition
- Chapters 5–8 Domain 3, System Design (plus the technical knowledge used in later domains)
- Chapters 9–10 Domain 4, Development
- Chapters 11–12 Domain 5, Deployment
- Chapters 13–14 Domain 6, Operation and Maintenance
- Eligibility
Four-year technical degree (engineering, chemistry, physics, math or another technical field, from an accredited institution): at least 5 years of automation work, documented as 7,500 hours during the 5 years before the application date.
Two-year degree or no degree: at least 10 years of automation work (15,000 hours during the 10 years before the application date). An associate degree in automation or a related technology counts as 2 years. These candidates also submit two references showing at least 2 years in a position of responsible charge , with at least one signed by a current or former supervisor.
CAP Associate credit: passing the CAP Associate certificate exam counts as 1 year (1,500 hours) toward either total.
One year of work equals 1,500 hours, and work and education periods may not overlap.
There is no application form. Paying the exam fee confirms that the candidate meets the criteria, will abide by the ISA Conduct and Anti-Harassment Policy, and accepts a random audit; audited candidates must submit documents within 60 days.
Fees and Exam Windows
- Fee ISA Member Non-member
- CAP application (exam) fee US$373 US$467
- Retest, each attempt within the window US$164 US$205
- Window extension (3 months; at most two per exam) US$80 US$100
ISA runs three exam windows a year. As of October 2026, the next application deadlines are 15 January 2027 (window 1 March 2027 to 29 February 2028), 15 May 2027 (window 1 July 2027 to 30 June 2028) and 15 September 2027 (window 1 November 2027 to 31 October 2028). The exam invitation (notice to schedule) arrives from Meazure Learning 15 days before the window begins, and the exam can be scheduled online or at a test center from that email. The CAP review course (EC00 and its virtual, online and self-paced versions) does not include the exam fee.
Recertification
CAP certification must be renewed every three years . Renewal requires 150 Professional Development Points (PDPs) earned over the three years from at least three of the six continuing professional development categories; work in automation earns one PDP per 16 hours, up to 35 PDPs a year. The renewal fee is US$270 (member) or US$340 (non-member) by PDPs, or US$336 or US$420 by exam. Renewal can be paid up to 120 days before expiry, and a certification that is not renewed within four months after expiry lapses, after which the candidate must reapply and retest.
Standards, References and How to Use This Guide
ISA recommends familiarity with ISA, IEEE, NFPA, NEC, NEMA, IEC, OSHA, FEMA, FDA and API standards and regulations, and notes that the validation study was done in the United States, so questions may refer to US standards and codes. ISA's own preparation materials include A Guide to the Automation Body of Knowledge and the CAP Study Guide, which contains 75 review questions with references.
Plan study time by weight: System Design and Operation and Maintenance together account for 74 of the 175 items. Practice the calculations that recur in this guide—payback and NPV, LOPA and PFD, valve Cv, intrinsic safety entity parameters, heat load, OEE and availability—until you can do them quickly with a basic calculator. In scenario questions several options can look workable, so practice explaining why the best option is better than each of the others.