Study guide

2.4 Impact and Risk Determination Under Non-Federal Frameworks

ISC2 Certified in Governance, Risk and Compliance CGRC

Track your progress as you read

Finished sections get a check mark.

1 Introduction & Exam Overview

0.1 ISC2 CGRC Exam Structure, Logistics & Passing Strategy 0.2 NIST RMF 7-Step Lifecycle & GRC Architecture

2 Chapter 1: Security and Privacy Governance, Risk Management, and Compliance Program

1.1 Enterprise Governance & GRC Frameworks 1.2 Security and Privacy Objectives: CIA, Non-Repudiation and Privacy Concepts 1.3 Multi-Tier Risk Management & Assessment Methodologies 1.4 System Development Life Cycle and Information Life Cycle Management 1.5 Establishing and Operating the Compliance Program 1.6 Legal, Regulatory & Federal Compliance Drivers 1.7 Privacy Governance, Organizational Roles & ISC2 Code of Ethics

3 Chapter 2: Scope of the System

2.1 System Boundary Definition, Architectural Context & Types 2.2 Identifying Information Types with NIST SP 800-60 2.3 System Categorization Process & Impact Analysis (FIPS 199 / SP 800-60) 2.4 Impact and Risk Determination Under Non-Federal Frameworks 2.5 System Registration, Environment & Interconnection Agreements

4 Chapter 3: Selection and Approval of Framework, Security, and Privacy Controls

3.1 Control Catalogs & NIST SP 800-53 Rev. 5 Structure 3.2 Control Allocation & Inheritance Models 3.3 Control Tailoring, Scoping & Overlay Guidance 3.4 Data Handling and Marking Requirements 3.5 Documenting Control Selection and Securing Stakeholder Agreement 3.6 Continuous Monitoring Strategy & Control Selection Approval

5 Chapter 4: Implementation of Security and Privacy Controls

4.1 Developing the Implementation Strategy: Resourcing, Funding and Timeline 4.2 Identifying Control Types: Management, Operational, Technical and Functional Classes 4.3 System Security and Privacy Plan (SSP/SSPP) Development 4.4 Security Engineering Principles & Technical Control Implementation 4.5 Secure Baseline Configuration & System Hardening 4.6 Implementing Compensating and Alternate Controls 4.7 DevSecOps, SDLC Integration & Supply Chain Risk Management 4.8 Documenting Control Implementation: Policies, Procedures, Plans and Risk Registers

6 Chapter 5: Assessment/Audit of Security and Privacy Controls

5.1 Security Assessment Plan (SAP) & Assessor Independence 5.2 Assessment Methods, Objects & Depth/Coverage 5.3 Assessment Execution, Vulnerability Scanning & Testing 5.4 Preparing the Initial Assessment/Audit Report 5.5 Selecting Risk Responses: Avoid, Accept, Share, Mitigate, Transfer 5.6 Stakeholder Collaboration, Corrective Action and Reassessment 5.7 Security Assessment Report (SAR) & Risk Findings Analysis 5.8 Developing the Risk Response Plan: Prioritization and Resources

7 Chapter 6: System Compliance and Authorization

6.1 The Core Authorization Package & Supporting Artifacts 6.2 Plan of Action and Milestones (POA&M) Architecture & Management 6.3 System Risk Acceptance Criteria and Stakeholder Concurrence 6.4 Authorization Decision Process & Decision Types 6.5 Residual Risk Acceptance, Terms of Authorization & Continuous ATO 6.6 Documenting and Communicating the Compliance Decision

8 Chapter 7: Compliance Maintenance and Continuous Monitoring

7.1 Continuous Monitoring Strategy & Operations (NIST SP 800-137) 7.2 Configuration Management & Security Impact Analysis (NIST SP 800-128) 7.3 Incident Response and Contingency Activities in Sustained Compliance 7.4 Awareness, Training, Evidence Collection and Monitoring-Strategy Revision 7.5 Ongoing Remediation, POA&M Sustainment & Annual Reviews 7.6 Event-Driven Reauthorization & System Decommissioning

2.4 Impact and Risk Determination Under Non-Federal Frameworks

Key Takeaways Explain This Topic AI

The CGRC blueprint requires impact determination 'based on the selected framework', so the FIPS 199 high-water mark is only one of several valid methods.

ISO/IEC 27001 requires the organization to define its own risk criteria and risk acceptance criteria rather than supplying prescribed impact levels.

A GDPR Data Protection Impact Assessment is legally mandatory in the three circumstances listed in Article 35(3) and must include the four elements in Article 35(7).

PCI DSS replaces impact levels with scoping: obligations follow the cardholder data environment and connected systems, and validation method follows merchant or service provider level.

CMMC assigns levels by data type — Federal Contract Information versus Controlled Unclassified Information — rather than by a computed impact rating.

Last updated: August 2026

Impact and Risk Determination Under Non-Federal Frameworks

The CGRC blueprint phrases task 2.2 carefully: the risk impact level is determined "based on the selected framework." Candidates who assume every scenario is a federal RMF scenario will misanswer any item set in a commercial, international, or contractual context. This section covers what replaces FIPS 199 when the governing regime is something else.

1. Why the Method Changes With the Framework

FIPS 199 is unusual: it prescribes three fixed impact levels, a fixed set of objectives, and a fixed combination rule. Most other frameworks do the opposite — they require the organization to define its own criteria and then apply them consistently.

Framework What Determines "Impact" Output

NIST RMF / FIPS 199 Prescribed Low/Moderate/High per C, I, A; high-water mark System security category → SP 800-53B baseline

ISO/IEC 27001 + 27005 Organization-defined risk criteria and acceptance criteria Risk treatment plan + Statement of Applicability

GDPR Risk to the rights and freedoms of natural persons DPIA; possibly prior consultation with the supervisory authority

PCI DSS Scope of the cardholder data environment; merchant/service provider level Applicable requirements + validation method (SAQ or ROC)

  • CMMC Type of data handled (FCI vs. CUI) CMMC Level 1, 2, or 3
  • FedRAMP FIPS 199 category of the cloud service Low, Moderate, High, or Li-SaaS baseline

Important

Notice the pivot. NIST asks "how bad would compromise be for the organization?" GDPR asks "how bad would processing be for the individual?" These can point in opposite directions: a marketing analytics platform may be trivially Low-impact to the organization while creating high risk to data subjects. Reading the exam item for whose harm is being measured resolves most confusion here.

2. ISO/IEC 27001 and ISO/IEC 27005

ISO/IEC 27001 does not tell you what "high risk" means. Clause 6.1.2 requires the organization to establish and maintain information security risk criteria , including risk acceptance criteria and criteria for performing assessments, and then to apply them so results are consistent, valid, and comparable . ISO/IEC 27005 supplies the supporting guidance for doing that.

The process runs: establish context and criteria → risk identification → risk analysis (estimate consequence and likelihood) → risk evaluation (compare against criteria and prioritize) → risk treatment (modify, retain, avoid, or share) → obtain risk owner approval of the treatment plan and acceptance of residual risk.

Two ISO artifacts have no NIST equivalent and are examinable:

The Statement of Applicability (SoA) lists every Annex A control, states whether it is applicable, gives the justification for inclusion or exclusion, and records implementation status. It is the central certification artifact — roughly the ISO analogue of the control-selection portion of an SSP.

The risk owner is a named individual accountable for a specific risk, who must approve its treatment and accept the residual risk. Functionally parallel to the Authorizing Official, but scoped per risk rather than per system.

ISO/IEC 27002:2022 provides the implementation guidance, reorganized into 93 controls across four themes — Organizational (37), People (8), Physical (14), and Technological (34) — replacing the previous 114 controls in 14 clauses.

3. The GDPR Data Protection Impact Assessment

A DPIA is not discretionary. Article 35(1) requires one whenever processing is "likely to result in a high risk to the rights and freedoms of natural persons." Article 35(3) makes it mandatory in three specific cases:

Systematic and extensive evaluation of personal aspects based on automated processing, including profiling, where decisions produce legal effects or similarly significantly affect the individual.

Large-scale processing of special categories of data (Article 9 — health, biometrics, race, religion, sexual orientation, political opinions) or of criminal conviction and offence data (Article 10).

Systematic monitoring of a publicly accessible area on a large scale — the CCTV and public-space analytics case.

Article 35(7) fixes the minimum content: a systematic description of the processing and its purposes; an assessment of necessity and proportionality ; an assessment of the risks to the rights and freedoms of data subjects; and the measures envisaged to address those risks , including safeguards and demonstrations of compliance.

Article 36 adds the escalation rule that exam items like to test: if the DPIA indicates the processing would result in a high residual risk in the absence of mitigating measures , the controller must consult the supervisory authority before processing begins . The Data Protection Officer advises on the DPIA where one is designated.

  • DPIA Privacy Impact Assessment (US federal)
  • Required by GDPR Article 35 Required by the E-Government Act of 2002 § 208
  • Measures risk to individuals' rights and freedoms Analyzes handling of PII in information systems
  • May require prior consultation with a supervisory authority Reviewed by the SAOP; generally published
  • Applies to controllers regardless of sector Applies to US federal agencies
  • 4. PCI DSS: Scoping Instead of Impact Levels

PCI DSS has no impact ratings at all . Two different questions replace them.

What is in scope? The cardholder data environment (CDE) comprises the people, processes, and technology that store, process, or transmit cardholder data or sensitive authentication data — plus all connected-to and security-impacting systems. Because scope is the primary cost driver, network segmentation that isolates the CDE is the highest-value architectural decision available; segmentation is not required by the standard, but without it the entire network is in scope.

How is compliance validated? Validation method follows the entity's merchant level (driven by annual transaction volume) or service provider level : higher-volume entities require a Report on Compliance (ROC) produced with a Qualified Security Assessor, while lower volumes may use a Self-Assessment Questionnaire (SAQ) of the type matching their acceptance channel.

The current version is PCI DSS v4.0.1 , released June 2024. The requirements originally published as future-dated best practices in v4.0 became mandatory on 31 March 2025 , so the whole standard now applies. PCI DSS binds through card-brand contracts rather than statute — no less enforceable, but enforced through fines, increased transaction costs, and loss of card-acceptance privileges.

5. CMMC: Level Follows the Data

CMMC assigns requirements by what data the contractor handles , not by a computed impact score:

Level Data Requirements Assessment

Level 1 Federal Contract Information (FCI) 15 basic safeguarding requirements (FAR 52.204-21) Annual self-assessment

Level 2 Controlled Unclassified Information (CUI) The 110 requirements of NIST SP 800-171 Self-assessment or C3PAO certification, depending on the contract

Level 3 CUI with heightened threat exposure Level 2 plus selected NIST SP 800-172 enhancements Government-led (DIBCAC) assessment

The CMMC Program rule at 32 CFR Part 170 took effect 16 December 2024 , and the acquisition rule adding CMMC clauses to contracts at 48 CFR took effect 10 November 2025 , introducing requirements into solicitations through a phased rollout. The practical governance consequence is that a CGRC professional supporting a defense supplier determines obligations by asking which data types flow under the contract — the same information-type analysis from the previous section, applied to a contractual rather than statutory framework.

Loading diagram... Selecting the Correct Impact Determination Method by Framework