Study guide

16.3 Main Activities in an Internal Audit

PECB ISO 14001 Lead Auditor Exam

Track your progress as you read

Finished sections get a check mark.

1 Introduction & Exam Overview

1.1 Current Exam Facts 1.2 PECB Credential Path & Requirements 1.3 ISO 14001, ISO 19011 & ISO/IEC 17021-1

2 EMS Fundamentals & ISO 14001 Context

2.1 Management Systems, EMS & ISO 14001 Applicability 2.2 ISO 14000 Family, Related Standards & Frameworks 2.3 EMS Advantages & Environmental Management Principles

3 Certification Scheme & Core EMS Concepts

3.1 Certification Process & Party Roles 3.2 Key EMS Definitions 3.3 Environmental Aspects vs Impacts

4 PDCA, Context & Leadership (Clauses 4–5)

4.1 PDCA Cycle for EMS Implementation 4.2 Clause 4 — Context of the Organization 4.3 Clause 5 — Leadership

5 Planning & Support (Clauses 6–7)

5.1 Clause 6.1 — Aspects, Compliance Obligations & Risks 5.2 Clause 6.2 — Environmental Objectives 5.3 Clause 7 — Support

6 Operation, Performance & Improvement (Clauses 8–10)

6.1 Clause 8 — Operation 6.2 Clause 9 — Performance Evaluation 6.3 Clause 10 — Improvement

7 Audit Definition, Parties & Principles

7.1 Audit Definition & First/Second/Third-Party Audits 7.2 Audit Objectives & Criteria 7.3 Audit Principles (ISO 19011)

8 Auditor Competence, Irregularities & Evidence

8.1 Irregularities & Illegal Acts in an Audit 8.2 Auditor Knowledge, Skills & Technology 8.3 Types of Audit Evidence 8.4 Evidence Reliability, Materiality & Reasonable Assurance

9 Preparing an ISO 14001 Audit

9.1 Audit Offer & Feasibility 9.2 Audit Team Roles & Auditor Rejection 9.3 Objectives, Scope, Criteria & Initial Contact 9.4 Defining the Audit Schedule

10 Stage 1 Audit & Stage 2 Planning

10.1 Stage 1 Purpose & On-Site Activities 10.2 Stage 1 Documented Information Review & Outputs 10.3 Stage 2 Planning & Activities Overview

11 Stage 2 Execution: Meetings, Guides & Evidence Collection

11.1 Audit Test Plans & Work Documents 11.2 Opening Meeting 11.3 Guides, Observers & Conflict Management 11.4 Evidence Collection Procedures

12 Evidence Tools, Analysis & Audit Findings

12.1 Evidence Collection Tools — Sampling & Technical Verification 12.2 Evidence Analysis — Corroboration & Evaluation 12.3 Types of Audit Findings 12.4 Drafting Nonconformity Reports

13 Benefit of the Doubt & Audit Record Quality

13.1 Benefit of the Doubt in Audit Judgments 13.2 Quality Reviews of Audit Records

14 Closing the Audit: Conclusions, Recommendations & Meeting

14.1 Audit Conclusions 14.2 Certification Recommendations 14.3 Closing Meeting

15 Audit Report, Follow-Up, Surveillance & Recertification

15.1 Audit Report Contents 15.2 Follow-Up, Action Plans & Surveillance Audits 15.3 Recertification & Certificate Modification, Suspension, Withdrawal

16 Managing the EMS Audit Program

16.1 Audit Program Management via PDCA 16.2 Internal vs External Audits & the Internal Audit Function 16.3 Main Activities in an Internal Audit

17 Audit Program Records & Continual Improvement

17.1 Audit Program Records — Archival, Maintenance & Protection 17.2 Monitoring, Evaluating & Improving the Audit Program

16.3 Main Activities in an Internal Audit

Key Takeaways Explain This Topic AI

Internal audit activities follow a managed sequence: initiate, prepare (document review and plan), conduct (opening, evidence collection, findings), report, and complete/follow-up

Each audit needs defined objectives, scope, and criteria before fieldwork begins

Evidence must be objective, verifiable, and sufficient relative to the risk and environmental importance of the process

Findings should be classified consistently (conformity, nonconformity, opportunity for improvement) and reported to relevant management

Follow-up verifies corrective action effectiveness; closing the loop is part of programme credibility and Clause 10 improvement

Last updated: July 2026

16.3 Main Activities in an Internal Audit

Quick Answer: An individual internal EMS audit follows ISO 19011’s conducting-audit guidance: initiate the audit; prepare (including document review and the audit plan); conduct activities to collect evidence and generate findings; prepare and distribute the report; then complete the audit and perform follow-up as required. ISO 14001 Clause 9.2 expects defined criteria/scope, impartial auditors, management reporting, and retained evidence of results.

While Section 16.1 addressed managing the programme , this section focuses on the activities inside one internal audit . Lead Auditors—whether performing first-party work or evaluating a client’s internal audits during certification—must recognize when those activities are complete, competent, and risk-based.

Activity Sequence Overview

Phase Main activities EMS-focused outputs

Initiate Confirm feasibility, appoint team leader/team, establish contact Agreed objectives/scope/criteria; access arrangements

Prepare Document review; risk-based plan and sampling strategy Audit plan, checklists/work documents, logistics

Conduct Opening meeting; collect/verify evidence; generate findings; closing meeting Working papers, clear findings with evidence

Report Prepare, approve, distribute audit report Documented results for management and records

Complete & follow-up Close audit file; verify corrective actions where needed Updated NC status; input to programme monitoring

These phases mirror ISO 19011 Clause 6 and should be scaled to audit size—but not skipped. A half-day internal audit of a low-aspect process still needs criteria, a plan (even concise), evidence, and a report.

1. Initiating the Audit

Initiation confirms that the audit can be done: scope is clear, criteria exist, information is available, and cooperation is feasible. For internal EMS audits, objectives often include verifying conformity of specific processes (e.g., operational control of hazardous waste, emergency preparedness, compliance evaluation) and assessing whether controls are effective. Scope defines boundaries—sites, processes, shifts, contractors. Criteria typically include ISO 14001 clauses relevant to the process, EMS documented information, and applicable compliance obligations.

Feasibility issues (records unavailable, key staff on shutdown, unsafe access) should be escalated to the programme manager before forcing a hollow audit.

2. Preparing the Audit Plan and Document Review

Document review examines the environmental policy, aspect/impact registers, compliance obligation lists, operational controls, monitoring results, previous audit findings, and relevant permits or procedures. The goal is not to “audit on paper only,” but to identify risks, changes, and sampling priorities for fieldwork.

The audit plan (ISO 19011) specifies objectives, scope, criteria, schedule, team roles, methods (interview, observation, record sampling), and logistics. Risk-based sampling for EMS work prioritizes significant aspects, recent changes, prior nonconformities, and interfaces (contractors, multi-shift operations). Work documents—question sets, sampling sheets—support consistency without becoming a substitute for professional judgment.

3. Conducting Audit Activities

Opening meeting. Confirm plan, methods, confidentiality, and safety rules; introduce the team; clarify that the audit evaluates the EMS, not individual blame.

Collecting and verifying information. Use interviews, observation of activities and conditions, and review of documented information. EMS evidence examples: observed segregation of waste streams, calibration status of emission monitors, training records for spill response, permit condition tracking, and life-cycle related operational controls where claimed. Information becomes audit evidence when verified and relevant to audit criteria. Sufficiency depends on risk: a single tidy procedure is rarely enough for a high-significance process.

Generating findings. Compare evidence to criteria. Outcomes typically include conformity, nonconformity (failure to fulfill a requirement), and optionally observations/opportunities for improvement. Nonconformities should be factual, criterion-referenced, and supported by evidence—not opinions about “best practice.” Grade major/minor only if the organization’s (or CB’s) scheme defines those terms; internally, consistency of definition matters more than labels alone.

Closing meeting. Present findings so they are understood and acknowledged; explain reporting and follow-up expectations; avoid negotiating away clear nonconformities.

4. Preparing and Distributing the Audit Report

The report should enable management action. Typical contents: objectives, scope, criteria, team, dates, findings summary, nonconformity details, conclusions on conformity and effective implementation (aligned with Clause 9.2.1 intent), and any uncertainties or unresolved obstacles. Reports are distributed to relevant management and retained as documented information evidencing audit results (Clause 9.2.2).

5. Completing the Audit and Follow-up

The audit is complete when planned activities are finished and the approved report is distributed. Follow-up verifies that corrections and corrective actions address causes and are effective—especially for EMS issues that could recur as environmental incidents or compliance breaches. Ineffective follow-up is itself a programme weakness and a frequent certification finding. Results also feed programme monitoring (were objectives met?) and management review inputs.

Auditor Behaviors That Strengthen Internal Audits

Trace from significant aspects → operational controls → monitoring → competence → emergency readiness.

Sample implementation on the floor, not only controlled documents.

Test how compliance obligations are evaluated and acted upon (Clause 9.1.2), not merely listed.

Record enough evidence that a third party can understand the finding months later.

Escalate independence conflicts before fieldwork.

Common Activity Failures

  • Failure Why it matters
  • No defined criteria/scope per audit Violates Clause 9.2.2; findings become unanchored
  • Checklist ticking without verification Misses ineffective implementation
  • Findings without evidence or criterion Cannot drive credible corrective action
  • Report never reaches management Breaks the Clause 9.2 reporting requirement
  • No follow-up on NCs Recurring environmental and compliance risk
  • Mini Case

An internal team audits “operational planning and control” for a solvent cleaning line. Preparation shows a new solvent introduced three months ago (change) and a prior NC on secondary containment. The plan prioritizes observation of storage, spill kits, training for the new chemical, and waste manifests. Fieldwork finds the SDS available but operators unaware of revised PPE, and containment drains left open. Findings cite organizational operational-control requirements and ISO 14001 Clause 8.1, supported by interview and observation evidence. The report goes to the plant manager and EHS lead; follow-up later verifies retraining effectiveness and sealed containment. That sequence—initiate, prepare, conduct, report, follow-up—is the main activity chain Lead Auditors must know cold.