Study guide

3.3 Clause 6.1.3: Legal and Other Compliance Obligations

PECB ISO 45001 Lead Auditor Exam

Track your progress as you read

Finished sections get a check mark.

1 Introduction & Exam Overview

About the PECB ISO 45001 Lead Auditor Exam

2 Chapter 1: OH&S Management Systems & ISO 45001 Fundamentals

1.1 OHSAS 18001 to ISO 45001:2018 Evolution & Annex SL Structure 1.2 Core OH&S Terminology & Definitions 1.3 The PDCA Cycle & Risk-Based Thinking in OH&S 1.4 Organizations, Human Rights & Labour Practices in OH&S 1.5 Classifying the Common Causes of Occupational Accidents

3 Chapter 2: Organizational Context & Worker Leadership (Clauses 4 & 5)

2.1 Clause 4: Organizational Context, Interested Parties & Scope 2.2 Clause 5.1–5.3: Leadership, Commitment & OH&S Policy 2.3 Clause 5.4: Worker Consultation & Participation

4 Chapter 3: Planning for Hazard Identification & Risk Assessment (Clause 6.1)

3.1 Clause 6.1.1–6.1.2.1: Proactive Hazard Identification Methodologies 3.2 Clause 6.1.2.2–6.1.2.3: Assessment of OH&S Risks & Opportunities 3.3 Clause 6.1.3: Legal and Other Compliance Obligations

5 Chapter 4: OH&S Objectives & Support Mechanisms (Clauses 6.2 & 7)

4.1 Clause 6.2: Measurable OH&S Objectives & Planning to Achieve Them 4.2 Clause 7.1–7.4: Competence, Awareness & Communication 4.3 Clause 7.5: Documented Information Control & Retention

6 Chapter 5: Operational Planning & The Hierarchy of Controls (Clause 8.1)

5.1 Clause 8.1.1–8.1.2: Operational Controls & The Hierarchy of Controls 5.2 Clause 8.1.3: Management of Change Processes 5.3 Clause 8.1.4: Procurement, Contractors & Outsourcing Controls

7 Chapter 6: Emergency Response & Performance Evaluation (Clauses 8.2 & 9.1)

6.1 Clause 8.2: Emergency Preparedness, Response & Drills 6.2 Clause 9.1.1: Monitoring, Measurement, Analysis & OH&S Performance 6.3 Clause 9.1.2: Evaluation of Legal and Regulatory Compliance

8 Chapter 7: Internal Audit, Management Review & Improvement (Clauses 9.2, 9.3 & 10)

7.1 Clause 9.2: Internal Audit Programme & Auditor Impartiality 7.2 Clause 9.3: Management Review Inputs, Outputs & Governance 7.3 Clause 10: Incident Investigation, Nonconformity & Corrective Action

9 Chapter 8: Principles of Auditing & Audit Programme Management (ISO 19011)

8.1 Seven Principles of Auditing under ISO 19011 8.2 Managing an Audit Programme: Planning, Risks & Resources 8.3 Certification Cycles & Audit Types under ISO/IEC 17021-1 8.4 Materiality & Reasonable Assurance in OH&S MS Audits 8.5 The Audit Risk Model: Inherent, Control & Detection Risk 8.6 Legal Implications, Irregularities & Auditor Negligence

10 Chapter 9: Audit Preparation & Stage 1 Audit Execution

9.1 Initiating the Audit, Team Roles & Feasibility Determination 9.2 Stage 1 Audit: Objectives, Documentation Review & Readiness Assessment 9.3 Developing the Audit Plan, Checklists & Sampling Plan 9.4 Terms of the Audit Engagement, Initial Contact & Cultural Considerations 9.5 The Seven Types of Audit Evidence 9.6 Audit Working Papers & Audit Test Plans

11 Chapter 10: Conducting Stage 2 On-Site Audit & Evidence Collection

10.1 Opening Meeting Protocol & On-Site Audit Coordination 10.2 Interviewing Techniques for Workers & Management 10.3 Observation of Workplaces & Audit Sampling Methodologies 10.4 Conflict Resolution & Managing Difficult Audit Situations

12 Chapter 11: Audit Trails, Evidence Triangulation & Nonconformity Writing

11.1 Following Audit Trails & Triangulating Evidence 11.2 Grading Findings: Major NC, Minor NC & Opportunities for Improvement 11.3 Drafting Auditable Nonconformity Reports (NCRs) 11.4 Benefit of the Doubt, Anomalies & the Full Findings Spectrum

13 Chapter 12: Audit Closing, Corrective Action Verification & Auditor Ethics

12.1 Closing Meeting Conduct & Formal Audit Reporting 12.2 Root Cause Analysis Evaluation & Corrective Action Follow-Up 12.3 Auditor Competence, CPD & PECB Code of Ethics 12.4 Quality Review of Audit Documentation & Report Approval

3.3 Clause 6.1.3: Legal and Other Compliance Obligations

Key Takeaways Explain This Topic AI

ISO 45001:2018 Clause 6.1.3 mandates a three-part process: determining and accessing up-to-date legal and other requirements, determining their exact operational application, and integrating them into the OH&S MS.

'Other requirements'—such as collective bargaining agreements, corporate mandates, and voluntary industry codes—become legally binding within the management system once the organization subscribes to them.

Clause 6.1.3 represents the planning phase (determining what applies), whereas Clause 9.1.2 represents the performance evaluation phase (measuring actual compliance status).

Lead auditors must verify the currency of the legal register by testing whether recent legislative changes have been analyzed and operationalized at the shop-floor level.

Last updated: September 2026

3.3 Clause 6.1.3: Legal and Other Compliance Obligations

A credible Occupational Health and Safety Management System requires robust compliance with statutory regulations and voluntary commitments. Under ISO 45001:2018 Clause 6.1.3 , the organization must establish, implement, and maintain a process to determine, access, and apply its legal requirements and other requirements . For a lead auditor, auditing Clause 6.1.3 involves verifying that statutory obligations are not merely listed in an administrative register, but actively translated into operational controls, training, and workplace behaviors.

1. The Three-Step Process of Clause 6.1.3

Clause 6.1.3 mandates three interconnected operational steps:

Determine and Access (6.1.3.a): The organization must determine and maintain access to up-to-date legal and other requirements applicable to its hazards, risks, and OH&S management system. Access requires operational personnel to be able to review current statutory texts (e.g., via commercial databases, gazettes, or industry bulletins).

Determine Applicability and Communication (6.1.3.b): The organization must determine how these requirements apply to its operations and what needs to be communicated. This operational translation is vital: a statutory noise regulation must be converted into specific site requirements (e.g., 85 dBA 8-hour TWA limit, biennial audiometric testing, designated hearing protection zones).

Integrate into Planning (6.1.3.c): Requirements must be incorporated when establishing, implementing, operating, and improving the OH&S MS—directly shaping operational controls (Clause 8.1), competence (Clause 7.2), monitoring (Clause 9.1.1), and management reviews (Clause 9.3).

The organization must maintain and retain documented information on its legal and other requirements and update it to reflect any changes.

2. Legal Requirements vs. Other Requirements

Auditors must distinguish between statutory mandates and subscribed voluntary commitments:

Statutory Legal Requirements

Legally binding obligations enacted by governmental or administrative authorities. Non-compliance risks fines, operational closures, or criminal prosecution:

  • National occupational safety statutes and regulations (e.g., OSHA, HSE, EU Directives);
  • State, provincial, and municipal safety, fire, and building codes;
  • Operating licenses, air discharge permits, and hazardous materials permits;

Mandatory statutory inspection frequencies for safety-critical assets (e.g., boilers, pressure vessels, cranes, hoists, local exhaust ventilation).

Other Requirements

Non-statutory obligations to which an organization voluntarily commits. Key Exam Principle: Once subscribed to, voluntary obligations become mandatory compliance requirements under ISO 45001 . Violations constitute auditable nonconformities:

Collective Bargaining Agreements (CBAs): Union accords establishing mandatory rest breaks, maximum shift lengths, or safety committee ratios;

  • Corporate Group Policies: Internal safety standards exceeding statutory local requirements;
  • Customer Safety Specifications: Contractual safety mandates required on client industrial sites;
  • Voluntary Industry Standards: Specialized industry codes (e.g., Responsible Care, ANSI/ASSP);

Insurance Requirements: Risk engineering stipulations mandated by property and casualty insurers.

3. Operationalizing Compliance: Beyond the Generic Title List

A frequent audit failure is maintaining a generic list of standard titles (e.g., 'OSHA 29 CFR 1910' ) without detailing site-level application. Clause 6.1.3 requires establishing an explicit link between statutory articles and workplace controls:

Statutory Citation Requirement Summary Specific Site Applicability Operational Control Link

Pressure Systems Safety Regs Pressure vessels > 0.5 bar require inspection every 14 months by certified inspector. Main autoclave (Unit 3) and compressed air receiver tanks (A & B). SOP-MNT-04; Maintenance Work Order #8821.

Noise Exposure Regulations Upper Action Value: 85 dBA 8-hr TWA. Mandatory hearing protection and audiometry. Stamping Press Bay (89 dBA) and Wood Mill (91 dBA). Signage SIG-012; Annual Audiometry; PPE Policy.

Confined Space Directives Continuous atmospheric monitoring, rescue team, permit-to-work before entry. Wastewater sump and grain storage silos. Permit-to-Work PTW-CS-01; Calibrated 4-gas meters; ERP-04.

Union CBA §14 VDT operators entitled to 10-minute rest breaks per 50 minutes of continuous typing. Call Center (120 workstations). Automated desktop software prompts; Shift Schedule SCHED-2026.

4. Distinguishing Clause 6.1.3 from Clause 9.1.2

Candidates must distinguish between planning and performance evaluation:

Clause 6.1.3 (Plan): Determining what requirements exist, accessing texts, establishing operational applicability, and maintaining documented information. Focus: 'What applies to us and how do we integrate it?'

Clause 9.1.2 (Check): Periodically and systematically evaluating whether the organization is actually complying with those determined requirements. Focus: 'Are we actively conforming to our obligations, and what objective evidence supports compliance?'

An organization may maintain a comprehensive register under Clause 6.1.3 but fail Clause 9.1.2 if it never conducts audits to confirm current operational conformity.

5. Lead Auditor Protocols: Auditing Legal Registers and Verifying Currency

During a Stage 2 audit, the lead auditor should execute these verification steps:

Verify Update Mechanisms: Inquire how legislative changes are tracked. Check whether the organization uses structured update services, legal gazettes, or professional subscriptions, and check the date of the latest register revision.

Execute the 'Newly Enacted Law' Test: Prior to the on-site audit, research recent health and safety legislation enacted within the past 6–12 months. Verify whether the new law appears in the register, whether applicability was analyzed, and whether operational controls were adjusted.

Sample Statutory Certificates: Inspect physical assets on the shop floor (e.g., cranes, boilers, forklifts). Verify that statutory inspection plates and certificates match legal requirements and maintenance records.

Sample Worker Understanding: Interview supervisors and workers (Clause 7.4) to verify awareness of mandatory statutory limits and permit protocols applicable to their tasks.

6. Real-World Audit Scenario: The Lapsed Vessel and Missing Regulation

Context: During an audit of a chemical blending plant, the auditor reviews the legal compliance register, last updated 18 months ago. The auditor discovers two issues:

A national regulation on chemical packaging and hazard pictograms (incorporating GHS Revision 8) came into force 10 months ago. The register makes no reference to it, and production lines still utilize obsolete hazard labels.

The register correctly notes the statutory annual ultrasonic inspection requirement for pressurized chlorine tanks. However, inspection certificates for Tank C-102 expired four months ago, and testing was deferred to reduce costs.

Evaluation: The auditor issues two findings:

A Minor Nonconformity under Clause 6.1.3 for failing to maintain an ongoing process to determine and access newly enacted legal requirements;

A Major Nonconformity under Clause 9.1.2 and Clause 8.1 for operating a safety-critical pressure vessel with an expired statutory certificate, representing an active breach of legal compliance and operational control.

7. Common Exam Traps and Candidate Errors

Trap 1: Ignoring 'Other Requirements.' Candidates frequently assume that only governmental legislation matters. Subscribed voluntary agreements (e.g., union CBAs, customer codes) carry mandatory audit weight under ISO 45001.

Trap 2: Equating Access with Compliance. Subscribing to an online legal database satisfies the 'access' requirement of Clause 6.1.3(a), but does not satisfy Clause 6.1.3(b) (determining applicability) or Clause 9.1.2 (evaluating compliance).

Trap 3: Assuming Regulatory Fines Preclude Certification. Prior citations or fines do not automatically bar an organization from certification. The auditor evaluates whether corrective actions (Clause 10.2) were implemented and operational controls strengthened.

Loading diagram... ISO 45001 Legal and Other Requirements Lifecycle