Study guide
1.1 ICC R17, T17, G17, and Jurisdiction Variance
Journeyman Electrician Study Guide Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Exam Orientation and Source Control
1.1 ICC R17, T17, G17, and Jurisdiction Variance 1.2 Current Format, Cost, Time, and Passing Score 1.3 Licensing Board vs. Exam Provider 1.4 Official References, Open-Book Rules, and Calculators 1.5 Domain Weights and Study Map 1.6 Using the Practice Bank, Error Log, and NEC Index
2 Chapter 2: NEC Navigation, Definitions, and Code Strategy
2.1 NEC Book Structure and Article Map 2.2 Article 100 Definitions and Exam Language 2.3 Index, Table, and Annex Navigation 2.4 Shall, Shall Not, Permitted, and Informational Notes 2.5 Using Code References Without Overlooking Context 2.6 State Amendments and Code Edition Control 2.7 NEC Navigation Case Lab
3 Chapter 3: Electrical Theory and Calculation Foundations
3.1 Ohm's Law, Power, and Basic Units 3.2 Series, Parallel, and Circuit Behavior 3.3 Single-Phase, Three-Phase, and Voltage Systems 3.4 Continuous Loads, Demand, and 125 Percent Rules 3.5 Voltage Drop and Practical Calculation Setup 3.6 Load Calculation Workflow 3.7 Calculation Foundation Case Lab
4 Chapter 4: Services, Service Equipment, and Grounding/Bonding
4.1 Service Point, Service Conductors, and Disconnects 4.2 Service Load Calculation and Sizing 4.3 Service Equipment, Panelboards, and Switchboards 4.4 Grounding Electrode System and GEC 4.5 Bonding, Main Bonding Jumpers, and Effective Fault Path 4.6 Transformers and Separately Derived Systems 4.7 Services and Grounding Case Lab
5 Chapter 5: Feeders, Branch Circuits, and Conductor Sizing
5.1 Feeder vs. Branch Circuit Boundaries 5.2 Branch Circuit Ratings and Required Outlets 5.3 Conductor Ampacity, Temperature, and Terminal Ratings 5.4 Adjustment, Correction, and More Than Three Conductors 5.5 Overcurrent Protection and Small-Conductor Rules 5.6 GFCI, AFCI, Equipment Grounding, and Dwelling Circuits 5.7 Feeders and Branch Circuits Case Lab
6 Chapter 6: Wiring Methods, Raceways, Boxes, and Cables
6.1 Raceway Selection and Installation Logic 6.2 Underground Wiring, Wet Locations, and Protection 6.3 Boxes, Enclosures, and Conduit Bodies 6.4 Box Fill, Conductor Counting, and Device Yokes 6.5 Cabinets, Panelboards, and Switchboards 6.6 Flexible Cords, Cables, and Temporary Wiring 6.7 Wiring Methods Case Lab
7 Chapter 7: Equipment, Devices, Luminaires, and Controls
7.1 Receptacles, Switches, and Device Selection 7.2 Luminaires, Lampholders, and Lighting Outlets 7.3 Appliances and Utilization Equipment 7.4 Heating, Cooling, and HVAC Electrical Connections 7.5 Disconnects, Controllers, and Switching Devices 7.6 Equipment Grounding, Bonding, and Listing Markings 7.7 Equipment and Devices Case Lab
8 Chapter 8: Motors, Generators, Transformers, and Special Equipment
8.1 Motor Circuit Anatomy and Article 430 Navigation 8.2 Motor Conductors, Overload, and Short-Circuit Protection 8.3 Motor Controllers, Disconnects, and Nameplates 8.4 Generators, Transfer Equipment, and Optional Standby 8.5 Transformer Sizing, Protection, and Grounding 8.6 Emergency Systems, Fire Alarms, and Signaling Overview 8.7 Motors and Generators Case Lab
9 Chapter 9: Special Occupancies, Renewables, and Safety
9.1 Hazardous Classified Locations 9.2 Healthcare, Marinas, RV Parks, and Mobile Home Parks 9.3 Pools, Spas, and Similar Installations 9.4 Solar PV, Energy Storage, and Renewable Systems 9.5 Temporary Power, Emergency Systems, and Special Conditions 9.6 OSHA Subpart K and Safe Work Practice Context 9.7 Special Occupancies Case Lab
10 Chapter 10: Open-Book Exam Workflow and Mixed Code Labs
10.1 Four-Hour Pacing and Question Triage 10.2 Look-Up vs. Know-From-Memory Decisions 10.3 Mixed Calculation Lab 10.4 Mixed Code Navigation Lab 10.5 Diagnostic Report and Error Log Remediation 10.6 High-Weight Domain Remediation Plan 10.7 Full Exam Simulation Playbook
11 Chapter 11: Final Review, Test Day, and License Planning
11.1 Final Two-Week Study Plan 11.2 Reference Book, Tabs, and Allowed Materials Checklist 11.3 Pearson VUE, PRONTO, and Test-Day Rules 11.4 After the Exam: Results, Retakes, and Challenges 11.5 License Application, Work Hours, and Jurisdiction Next Steps 11.6 After Journeyman: Master, Contractor, and Continuing Education
1.1 ICC R17, T17, G17, and Jurisdiction Variance
Key Takeaways Explain This Topic AI
R17-N, T17-N, and G17-N are ICC National Standard Journeyman Electrician contractor/trades exams tied to different NEC editions.
R17-N uses the 2023 NEC, T17-N uses the 2020 NEC, and G17-N uses the 2017 NEC according to the current ICC national exam list.
ICC provides exam administration and score information to licensing agencies, but it does not issue a universal journeyman license.
A candidate must verify the required exam, NEC edition, application steps, and license rules with the jurisdiction where they intend to work.
Last updated: May 2026
The exam name is not the license
The ICC National Standard Journeyman Electrician exams are contractor/trades exams used by licensing agencies as one piece of a licensing process. ICC administers the exam through its contractor/trades program and Pearson VUE, but ICC is not the licensing board for every state, county, or city. Passing an ICC exam can satisfy an exam requirement where a jurisdiction accepts it, but it does not automatically create a universal state license.
That distinction matters because electrician licensing is local in practice. One candidate may need the ICC R17-N exam for a city license, another may need a state board exam built from the same NEC, and another may need documented work hours, apprenticeship records, fees, insurance, or a separate application before the exam is even scheduled.
The three ICC journeyman exam codes
The current ICC national contractor exam list identifies three active Journeyman Electrician versions. The code tells you the exam family, but the NEC edition tells you the book you must train with.
ICC code Exam name Primary NEC edition Practical meaning
G17-N Journeyman Electrician 2017 NEC Older adopted-code track still used where the jurisdiction has not moved forward.
T17-N Journeyman Electrician 2020 NEC Middle track for jurisdictions using the 2020 NEC.
R17-N Journeyman Electrician 2023 NEC Current target for this guide and the newest listed national journeyman track.
Do not study from a 2023 NEC book if your authorization letter or exam catalog says G17-N unless you are deliberately comparing editions. NEC article organization is stable in many places, but section numbers, exceptions, tables, and defined terms can change. An exam item is graded against the approved references for that exam, not against what your shop normally installs or what a newer edition would require.
Jurisdiction variance checklist
Before you buy books, schedule, or start full-length tests, make a one-page source-control sheet. The goal is to prevent studying the wrong edition or assuming a licensing rule that does not apply to your board.
Confirm the exact exam code: R17-N, T17-N, G17-N, or a jurisdiction-specific exam.
Confirm the NEC edition and any International Code references listed for that exam.
Confirm whether your board requires preapproval before registering with Pearson VUE.
Confirm experience-hour, apprenticeship, supervision, and application requirements.
Confirm license class names. Journeyman, residential, master, maintenance, and contractor can mean different things by jurisdiction.
Confirm retake rules, fee payment rules, and whether the board overrides the ICC default retake wait.
Save the bulletin, catalog page, board page, and any authorization email as dated PDFs or screenshots.
How to read a board instruction page
A licensing page often mixes three layers: eligibility, testing, and licensure. Read them separately. Eligibility answers whether you are allowed to apply. Testing answers which exam to take, where to schedule, and what references are allowed. Licensure answers what happens after you pass.
A good source-control note looks like this:
Question Example entry
Who licenses me? State electrical board, city building department, or other authority.
Who administers the test? ICC contractor/trades through Pearson VUE, if the board accepts it.
Which test? R17-N Journeyman Electrician, if specifically listed.
Which NEC? 2023 NEC for R17-N.
What else is required? Application, experience verification, fee, local forms, or board approval.
This habit also protects you from online study material that overstates national rules. A statement such as most states require electricians to be licensed is useful background. It is not enough to decide your exam. A statement such as the journeyman pass score is always a certain number everywhere is too broad. Use the current ICC bulletin for ICC exam facts and your board for licensing facts.
Exam trap: field code versus test source
In the field, you may work under a local amendment, a project specification, a utility service guide, or an adopted code cycle older than the book on your desk. On the exam, the answer comes from the listed references. When a question asks for a conductor ampacity, box fill result, working clearance, service rule, or motor calculation, your job is to find the controlling NEC rule for the edition being tested.
Use this source order during study:
Read the exam catalog for the exact exam version.
Build your reference set from the listed books only.
Use NEC index terms and article titles to locate the rule.
Check definitions in Article 100 when a word controls the answer.
Use tables, notes, exceptions, and cross-references before choosing.
Compare local amendments only after the exam answer is understood.
Why R17 is the default in this guide
This guide primarily targets R17-N because the current ICC list names it as the 2023 NEC Journeyman Electrician exam. It also explains T17-N and G17-N because many jurisdictions lag code adoption or keep older exam options active. When a calculation or navigation method is edition-sensitive, your approved NEC edition controls.
The safest study posture is simple: know the national exam framework, but never treat it as the entire licensing process. Your board decides whether the ICC result is accepted, whether you need authorization, and what document becomes your license after passing.