Study guide
1.3 Licensing Board vs. Exam Provider
Journeyman Electrician Study Guide Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Exam Orientation and Source Control
1.1 ICC R17, T17, G17, and Jurisdiction Variance 1.2 Current Format, Cost, Time, and Passing Score 1.3 Licensing Board vs. Exam Provider 1.4 Official References, Open-Book Rules, and Calculators 1.5 Domain Weights and Study Map 1.6 Using the Practice Bank, Error Log, and NEC Index
2 Chapter 2: NEC Navigation, Definitions, and Code Strategy
2.1 NEC Book Structure and Article Map 2.2 Article 100 Definitions and Exam Language 2.3 Index, Table, and Annex Navigation 2.4 Shall, Shall Not, Permitted, and Informational Notes 2.5 Using Code References Without Overlooking Context 2.6 State Amendments and Code Edition Control 2.7 NEC Navigation Case Lab
3 Chapter 3: Electrical Theory and Calculation Foundations
3.1 Ohm's Law, Power, and Basic Units 3.2 Series, Parallel, and Circuit Behavior 3.3 Single-Phase, Three-Phase, and Voltage Systems 3.4 Continuous Loads, Demand, and 125 Percent Rules 3.5 Voltage Drop and Practical Calculation Setup 3.6 Load Calculation Workflow 3.7 Calculation Foundation Case Lab
4 Chapter 4: Services, Service Equipment, and Grounding/Bonding
4.1 Service Point, Service Conductors, and Disconnects 4.2 Service Load Calculation and Sizing 4.3 Service Equipment, Panelboards, and Switchboards 4.4 Grounding Electrode System and GEC 4.5 Bonding, Main Bonding Jumpers, and Effective Fault Path 4.6 Transformers and Separately Derived Systems 4.7 Services and Grounding Case Lab
5 Chapter 5: Feeders, Branch Circuits, and Conductor Sizing
5.1 Feeder vs. Branch Circuit Boundaries 5.2 Branch Circuit Ratings and Required Outlets 5.3 Conductor Ampacity, Temperature, and Terminal Ratings 5.4 Adjustment, Correction, and More Than Three Conductors 5.5 Overcurrent Protection and Small-Conductor Rules 5.6 GFCI, AFCI, Equipment Grounding, and Dwelling Circuits 5.7 Feeders and Branch Circuits Case Lab
6 Chapter 6: Wiring Methods, Raceways, Boxes, and Cables
6.1 Raceway Selection and Installation Logic 6.2 Underground Wiring, Wet Locations, and Protection 6.3 Boxes, Enclosures, and Conduit Bodies 6.4 Box Fill, Conductor Counting, and Device Yokes 6.5 Cabinets, Panelboards, and Switchboards 6.6 Flexible Cords, Cables, and Temporary Wiring 6.7 Wiring Methods Case Lab
7 Chapter 7: Equipment, Devices, Luminaires, and Controls
7.1 Receptacles, Switches, and Device Selection 7.2 Luminaires, Lampholders, and Lighting Outlets 7.3 Appliances and Utilization Equipment 7.4 Heating, Cooling, and HVAC Electrical Connections 7.5 Disconnects, Controllers, and Switching Devices 7.6 Equipment Grounding, Bonding, and Listing Markings 7.7 Equipment and Devices Case Lab
8 Chapter 8: Motors, Generators, Transformers, and Special Equipment
8.1 Motor Circuit Anatomy and Article 430 Navigation 8.2 Motor Conductors, Overload, and Short-Circuit Protection 8.3 Motor Controllers, Disconnects, and Nameplates 8.4 Generators, Transfer Equipment, and Optional Standby 8.5 Transformer Sizing, Protection, and Grounding 8.6 Emergency Systems, Fire Alarms, and Signaling Overview 8.7 Motors and Generators Case Lab
9 Chapter 9: Special Occupancies, Renewables, and Safety
9.1 Hazardous Classified Locations 9.2 Healthcare, Marinas, RV Parks, and Mobile Home Parks 9.3 Pools, Spas, and Similar Installations 9.4 Solar PV, Energy Storage, and Renewable Systems 9.5 Temporary Power, Emergency Systems, and Special Conditions 9.6 OSHA Subpart K and Safe Work Practice Context 9.7 Special Occupancies Case Lab
10 Chapter 10: Open-Book Exam Workflow and Mixed Code Labs
10.1 Four-Hour Pacing and Question Triage 10.2 Look-Up vs. Know-From-Memory Decisions 10.3 Mixed Calculation Lab 10.4 Mixed Code Navigation Lab 10.5 Diagnostic Report and Error Log Remediation 10.6 High-Weight Domain Remediation Plan 10.7 Full Exam Simulation Playbook
11 Chapter 11: Final Review, Test Day, and License Planning
11.1 Final Two-Week Study Plan 11.2 Reference Book, Tabs, and Allowed Materials Checklist 11.3 Pearson VUE, PRONTO, and Test-Day Rules 11.4 After the Exam: Results, Retakes, and Challenges 11.5 License Application, Work Hours, and Jurisdiction Next Steps 11.6 After Journeyman: Master, Contractor, and Continuing Education
1.3 Licensing Board vs. Exam Provider
Key Takeaways Explain This Topic AI
The licensing board or local authority decides whether you are eligible, which exam you need, and what happens after you pass.
ICC and Pearson VUE handle exam delivery, registration mechanics, candidate rules, and score reporting for the ICC contractor/trades exam.
A passing ICC result is not the same as a license unless the jurisdiction completes or recognizes the licensing step.
Keep board requirements and exam-provider requirements in separate notes so you do not miss either set of rules.
Last updated: May 2026
Two authorities, two jobs
Journeyman electrician candidates often talk about the ICC exam as if it were the license. That shortcut is dangerous. The licensing board or local authority controls the right to work under a license. ICC provides contractor/trades exams that licensing agencies can use to measure knowledge. Pearson VUE administers the computer-based testing appointment for ICC contractor/trades exams.
Separate the jobs like this:
Function Usually controlled by What it means for you
Eligibility to test Licensing board or jurisdiction You may need approval before registering.
Exam content outline ICC exam catalog or bulletin Shows domains, references, time, and item count.
Scheduling platform Pearson VUE for ICC contractor/trades Controls appointment date, center, fee payment, and delivery rules.
License issuance Licensing board or jurisdiction Passing is only one possible requirement.
Local practice rights State, county, city, or other authority Determines where and how you may work.
Why the distinction matters
Imagine two candidates studying the same 2023 NEC. Candidate A has a board authorization letter requiring R17-N and can schedule through Pearson VUE. Candidate B lives in a jurisdiction that uses a separate state exam and does not accept ICC R17-N for that license. If Candidate B studies only ICC logistics and schedules R17-N without checking the board, the result may not help with licensure.
The reverse problem also happens. A board may accept R17-N, but only after a candidate submits experience records, pays an application fee, or receives an eligibility approval. Scheduling too early can create delays or wasted fees.
Build a two-column compliance file
Keep a simple compliance file with board facts on one side and exam-provider facts on the other. This is not busywork. It is the same discipline you use in electrical work when separating code minimums, engineered drawings, utility requirements, and manufacturer instructions.
- Board or jurisdiction facts ICC/Pearson VUE facts
- License class name Exam code and exam name
- Experience-hour requirement Number of questions
- Apprenticeship or supervision rules Time limit
- Application forms and fees Approved references
- Authorization to test Open-book or closed-book status
- Retake approval if required Test center or delivery rules
- License issue and renewal steps Score-report rules
- Questions to ask the board
Use direct, concrete questions. Do not ask only, Is ICC accepted? Ask which exam, which code edition, and what else is required.
Checklist:
Which journeyman license class am I applying for?
Do you require R17-N, T17-N, G17-N, or another exam?
Do I need board approval before scheduling?
What work experience documents must be submitted?
Are notarized employer forms required?
Does a passing exam expire if I do not complete the application quickly?
Are there local amendments I must know for licensing even if the ICC exam uses national references?
What retake rules apply if I fail?
Questions to answer from ICC and Pearson VUE sources
Once the board path is confirmed, move to exam logistics. The ICC bulletin and exam catalog provide the content outline, approved references, open-book status, item count, time limit, passing score guidance, and Pearson VUE registration link. Pearson VUE handles the appointment process for ICC contractor/trades exams.
Do not rely on a third-party forum for test-day policy. Calculator rules, open-book material rules, and remote testing rules can change. The brief states that administration details are subject to change, so current bulletins and catalogs should be used before registering.
Exam trap: treating a PASS as permission to work
A PASS result is evidence for the board. It is not automatically a wallet card, state license, local registration, or contractor authorization. Many jurisdictions require a final application review. Some separate the individual journeyman license from an electrical contractor license. Some require continuing education or renewal conditions after issuance.
This is especially important for people moving between states or working near city boundaries. A license recognized in one jurisdiction may not transfer automatically to another. Reciprocity, endorsement, and local registration rules are board questions, not ICC exam questions.
Field analogy: source hierarchy
Electricians already understand that one job can involve the NEC, local amendments, utility service standards, engineered plans, product listings, and OSHA safety rules. You do not merge those into one imaginary rulebook. You identify which authority answers which question.
Use the same hierarchy for exam prep:
Licensing question: ask the board or local authority.
Exam-format question: use the ICC bulletin and exam catalog.
Scheduling question: use Pearson VUE instructions for the ICC exam.
Safety context: use OSHA where relevant, especially for construction safety, but do not replace the NEC outline with OSHA.
Study-content question: use the listed NEC and related references for your exam code.
Documentation habit
Create a folder named with the date and jurisdiction, such as 2026-05-05-city-journeyman-sources . Save the board page, ICC exam list, bulletin, exam catalog page, calculator rules, and your authorization letter. Add a short text note with the source date.
This habit solves real problems. If a rule changes after you register, you can identify what you relied on. If a practice question conflicts with your edition, you can check the controlling reference. If your employer asks what exam you are taking, you can answer with the exact code and edition instead of a vague statement about the journeyman test.