Study guide

1.4 Official References, Open-Book Rules, and Calculators

Journeyman Electrician Study Guide Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Exam Orientation and Source Control

1.1 ICC R17, T17, G17, and Jurisdiction Variance 1.2 Current Format, Cost, Time, and Passing Score 1.3 Licensing Board vs. Exam Provider 1.4 Official References, Open-Book Rules, and Calculators 1.5 Domain Weights and Study Map 1.6 Using the Practice Bank, Error Log, and NEC Index

2 Chapter 2: NEC Navigation, Definitions, and Code Strategy

2.1 NEC Book Structure and Article Map 2.2 Article 100 Definitions and Exam Language 2.3 Index, Table, and Annex Navigation 2.4 Shall, Shall Not, Permitted, and Informational Notes 2.5 Using Code References Without Overlooking Context 2.6 State Amendments and Code Edition Control 2.7 NEC Navigation Case Lab

3 Chapter 3: Electrical Theory and Calculation Foundations

3.1 Ohm's Law, Power, and Basic Units 3.2 Series, Parallel, and Circuit Behavior 3.3 Single-Phase, Three-Phase, and Voltage Systems 3.4 Continuous Loads, Demand, and 125 Percent Rules 3.5 Voltage Drop and Practical Calculation Setup 3.6 Load Calculation Workflow 3.7 Calculation Foundation Case Lab

4 Chapter 4: Services, Service Equipment, and Grounding/Bonding

4.1 Service Point, Service Conductors, and Disconnects 4.2 Service Load Calculation and Sizing 4.3 Service Equipment, Panelboards, and Switchboards 4.4 Grounding Electrode System and GEC 4.5 Bonding, Main Bonding Jumpers, and Effective Fault Path 4.6 Transformers and Separately Derived Systems 4.7 Services and Grounding Case Lab

5 Chapter 5: Feeders, Branch Circuits, and Conductor Sizing

5.1 Feeder vs. Branch Circuit Boundaries 5.2 Branch Circuit Ratings and Required Outlets 5.3 Conductor Ampacity, Temperature, and Terminal Ratings 5.4 Adjustment, Correction, and More Than Three Conductors 5.5 Overcurrent Protection and Small-Conductor Rules 5.6 GFCI, AFCI, Equipment Grounding, and Dwelling Circuits 5.7 Feeders and Branch Circuits Case Lab

6 Chapter 6: Wiring Methods, Raceways, Boxes, and Cables

6.1 Raceway Selection and Installation Logic 6.2 Underground Wiring, Wet Locations, and Protection 6.3 Boxes, Enclosures, and Conduit Bodies 6.4 Box Fill, Conductor Counting, and Device Yokes 6.5 Cabinets, Panelboards, and Switchboards 6.6 Flexible Cords, Cables, and Temporary Wiring 6.7 Wiring Methods Case Lab

7 Chapter 7: Equipment, Devices, Luminaires, and Controls

7.1 Receptacles, Switches, and Device Selection 7.2 Luminaires, Lampholders, and Lighting Outlets 7.3 Appliances and Utilization Equipment 7.4 Heating, Cooling, and HVAC Electrical Connections 7.5 Disconnects, Controllers, and Switching Devices 7.6 Equipment Grounding, Bonding, and Listing Markings 7.7 Equipment and Devices Case Lab

8 Chapter 8: Motors, Generators, Transformers, and Special Equipment

8.1 Motor Circuit Anatomy and Article 430 Navigation 8.2 Motor Conductors, Overload, and Short-Circuit Protection 8.3 Motor Controllers, Disconnects, and Nameplates 8.4 Generators, Transfer Equipment, and Optional Standby 8.5 Transformer Sizing, Protection, and Grounding 8.6 Emergency Systems, Fire Alarms, and Signaling Overview 8.7 Motors and Generators Case Lab

9 Chapter 9: Special Occupancies, Renewables, and Safety

9.1 Hazardous Classified Locations 9.2 Healthcare, Marinas, RV Parks, and Mobile Home Parks 9.3 Pools, Spas, and Similar Installations 9.4 Solar PV, Energy Storage, and Renewable Systems 9.5 Temporary Power, Emergency Systems, and Special Conditions 9.6 OSHA Subpart K and Safe Work Practice Context 9.7 Special Occupancies Case Lab

10 Chapter 10: Open-Book Exam Workflow and Mixed Code Labs

10.1 Four-Hour Pacing and Question Triage 10.2 Look-Up vs. Know-From-Memory Decisions 10.3 Mixed Calculation Lab 10.4 Mixed Code Navigation Lab 10.5 Diagnostic Report and Error Log Remediation 10.6 High-Weight Domain Remediation Plan 10.7 Full Exam Simulation Playbook

11 Chapter 11: Final Review, Test Day, and License Planning

11.1 Final Two-Week Study Plan 11.2 Reference Book, Tabs, and Allowed Materials Checklist 11.3 Pearson VUE, PRONTO, and Test-Day Rules 11.4 After the Exam: Results, Retakes, and Challenges 11.5 License Application, Work Hours, and Jurisdiction Next Steps 11.6 After Journeyman: Master, Contractor, and Continuing Education

1.4 Official References, Open-Book Rules, and Calculators

Key Takeaways Explain This Topic AI

Exam questions and appeals are based on the approved references listed in the current ICC exam catalog.

Open-book access helps only if your references are organized, familiar, and allowed under current test rules.

Computer-based ICC contractor/trades exams generally allow copyrighted bound material with ink notes, highlighting, and permanently attached tabs, while loose papers are prohibited.

Calculator policies require nonprogrammable devices that cannot store exam information, with stricter PRONTO limits for remote delivery.

Last updated: May 2026

Approved references control the answer

For ICC contractor/trades exams, the approved references are listed in the Exam Catalog. Exam questions come from those listed references, and appeals are based on those listed references. That means your favorite field handbook, apprenticeship worksheet, YouTube shortcut, or local company standard may be useful for learning, but it is not the authority for the exam unless it is listed.

For the journeyman electrician track, the NEC edition is the center of gravity. R17-N uses the 2023 NEC, T17-N uses the 2020 NEC, and G17-N uses the 2017 NEC. R17-N and T17-N also reference International Codes in the source brief. The exact catalog page for your exam version should be checked before registration because administration details can change.

Open book is a skill

Open book can mislead candidates. It sounds like you can look up everything. The ICC bulletin warns that candidates will not have time to look up every answer. In a 4-hour, 80-question exam, you must know the shape of the NEC before the clock starts.

A strong reference system has three layers:

Layer Purpose Example

Memory map Know where topics live Services in 230, branch circuits in 210, motors in 430.

Index skill Find unfamiliar terms fast Look up demand factor, ampacity, bonding jumper, or receptacle.

Rule verification Read the controlling condition Check notes, exceptions, table headings, and definitions.

What may be allowed

The source brief states that computer-based exams generally allow copyrighted bound material with ink notes, highlighting, and permanently attached tabs. Loose papers are prohibited. Calculator rules generally require a battery-operated, nonprogrammable calculator that cannot store examination information and has no ribbon or paper printing.

PRONTO remote testing has stricter environment rules in the brief. It allows a basic four-function nonprogrammable calculator and prohibits loose papers, writing utensils, smart watches, external monitors, and any second monitor or screen. If you use PRONTO or any remote option, check current rules before assuming the same setup as a test center.

Item General rule from source brief Study action

Bound reference Generally allowed if copyrighted and bound Use the approved NEC edition and listed references.

Ink notes Generally allowed Keep notes short and code-navigation focused.

Highlighting Generally allowed Highlight headings, table titles, and common exceptions.

Permanent tabs Generally allowed Use durable tabs for major article groups.

Loose paper Prohibited Do not build a system that depends on loose sheets.

Calculator Nonprogrammable, no stored exam information Practice with the exact style you will bring or use.

Good notes versus bad notes

Good exam notes speed navigation. Bad notes create clutter. A margin note that says see Table 310.16 conditions may help. A full copied rule is slower to scan and may violate test-center interpretation if it looks like loose inserted study material or an attempt to store exam information outside normal notes.

Use notes for routes, not essays:

210 branch circuits: ratings, required outlets, GFCI/AFCI, loads.

230 services: conductors, disconnects, overcurrent, grounding.

250 grounding/bonding: definitions first, then system rule.

Chapter 9: raceway fill, conductor properties, notes matter.

430 motors: table FLC may differ from nameplate for calculations.

NEC navigation practice

A useful code-navigation drill has four steps. First, identify the noun in the question. Second, identify the condition. Third, locate the article or table. Fourth, verify whether an exception or note changes the result.

Example route:

Prompt clue Navigation step

Branch-circuit conductor ampacity Start in Article 210 for branch-circuit context.

Conductor size and insulation Move to Article 310 and ampacity tables.

More than three current-carrying conductors Check adjustment factors.

Ambient temperature given Check correction factors.

Final answer asks overcurrent size Confirm Article 240 rules if needed.

Do not memorize only numbers. Memorize paths. The exam may change the wording, but the path remains usable.

Calculator discipline

Electrical calculations are often simple arithmetic with strict setup. The calculator does not decide which load factor, ampacity column, conductor count, or overcurrent rule applies. It only executes the math after you choose the rule.

Practice writing compact setups on the provided testing material if allowed at your delivery method. For PRONTO, the brief says writing utensils and loose papers are prohibited, so you must understand the permitted on-screen or remote workflow before test day.

Common setup formats:

  • watts = volts x amperes
  • amperes = watts / volts
  • single-phase VA = volts x amperes
  • three-phase VA = volts x amperes x 1.732
  • adjusted ampacity = table ampacity x correction factor x adjustment factor
  • Exam trap: using a book that is good but not listed

Many electricians own excellent references. The exam does not grade excellence in general. It grades the listed sources. If a practice explanation cites a newer NEC, a local amendment, or a manufacturer guide, ask whether that source is approved for your exam. If not, use it only as background and return to the approved reference for the answer.

Source control is not paperwork. It is how you keep an open-book exam from becoming an open-confusion exam.