Study guide
11.5 License Application, Work Hours, and Jurisdiction Next Steps
Journeyman Electrician Study Guide Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Exam Orientation and Source Control
1.1 ICC R17, T17, G17, and Jurisdiction Variance 1.2 Current Format, Cost, Time, and Passing Score 1.3 Licensing Board vs. Exam Provider 1.4 Official References, Open-Book Rules, and Calculators 1.5 Domain Weights and Study Map 1.6 Using the Practice Bank, Error Log, and NEC Index
2 Chapter 2: NEC Navigation, Definitions, and Code Strategy
2.1 NEC Book Structure and Article Map 2.2 Article 100 Definitions and Exam Language 2.3 Index, Table, and Annex Navigation 2.4 Shall, Shall Not, Permitted, and Informational Notes 2.5 Using Code References Without Overlooking Context 2.6 State Amendments and Code Edition Control 2.7 NEC Navigation Case Lab
3 Chapter 3: Electrical Theory and Calculation Foundations
3.1 Ohm's Law, Power, and Basic Units 3.2 Series, Parallel, and Circuit Behavior 3.3 Single-Phase, Three-Phase, and Voltage Systems 3.4 Continuous Loads, Demand, and 125 Percent Rules 3.5 Voltage Drop and Practical Calculation Setup 3.6 Load Calculation Workflow 3.7 Calculation Foundation Case Lab
4 Chapter 4: Services, Service Equipment, and Grounding/Bonding
4.1 Service Point, Service Conductors, and Disconnects 4.2 Service Load Calculation and Sizing 4.3 Service Equipment, Panelboards, and Switchboards 4.4 Grounding Electrode System and GEC 4.5 Bonding, Main Bonding Jumpers, and Effective Fault Path 4.6 Transformers and Separately Derived Systems 4.7 Services and Grounding Case Lab
5 Chapter 5: Feeders, Branch Circuits, and Conductor Sizing
5.1 Feeder vs. Branch Circuit Boundaries 5.2 Branch Circuit Ratings and Required Outlets 5.3 Conductor Ampacity, Temperature, and Terminal Ratings 5.4 Adjustment, Correction, and More Than Three Conductors 5.5 Overcurrent Protection and Small-Conductor Rules 5.6 GFCI, AFCI, Equipment Grounding, and Dwelling Circuits 5.7 Feeders and Branch Circuits Case Lab
6 Chapter 6: Wiring Methods, Raceways, Boxes, and Cables
6.1 Raceway Selection and Installation Logic 6.2 Underground Wiring, Wet Locations, and Protection 6.3 Boxes, Enclosures, and Conduit Bodies 6.4 Box Fill, Conductor Counting, and Device Yokes 6.5 Cabinets, Panelboards, and Switchboards 6.6 Flexible Cords, Cables, and Temporary Wiring 6.7 Wiring Methods Case Lab
7 Chapter 7: Equipment, Devices, Luminaires, and Controls
7.1 Receptacles, Switches, and Device Selection 7.2 Luminaires, Lampholders, and Lighting Outlets 7.3 Appliances and Utilization Equipment 7.4 Heating, Cooling, and HVAC Electrical Connections 7.5 Disconnects, Controllers, and Switching Devices 7.6 Equipment Grounding, Bonding, and Listing Markings 7.7 Equipment and Devices Case Lab
8 Chapter 8: Motors, Generators, Transformers, and Special Equipment
8.1 Motor Circuit Anatomy and Article 430 Navigation 8.2 Motor Conductors, Overload, and Short-Circuit Protection 8.3 Motor Controllers, Disconnects, and Nameplates 8.4 Generators, Transfer Equipment, and Optional Standby 8.5 Transformer Sizing, Protection, and Grounding 8.6 Emergency Systems, Fire Alarms, and Signaling Overview 8.7 Motors and Generators Case Lab
9 Chapter 9: Special Occupancies, Renewables, and Safety
9.1 Hazardous Classified Locations 9.2 Healthcare, Marinas, RV Parks, and Mobile Home Parks 9.3 Pools, Spas, and Similar Installations 9.4 Solar PV, Energy Storage, and Renewable Systems 9.5 Temporary Power, Emergency Systems, and Special Conditions 9.6 OSHA Subpart K and Safe Work Practice Context 9.7 Special Occupancies Case Lab
10 Chapter 10: Open-Book Exam Workflow and Mixed Code Labs
10.1 Four-Hour Pacing and Question Triage 10.2 Look-Up vs. Know-From-Memory Decisions 10.3 Mixed Calculation Lab 10.4 Mixed Code Navigation Lab 10.5 Diagnostic Report and Error Log Remediation 10.6 High-Weight Domain Remediation Plan 10.7 Full Exam Simulation Playbook
11 Chapter 11: Final Review, Test Day, and License Planning
11.1 Final Two-Week Study Plan 11.2 Reference Book, Tabs, and Allowed Materials Checklist 11.3 Pearson VUE, PRONTO, and Test-Day Rules 11.4 After the Exam: Results, Retakes, and Challenges 11.5 License Application, Work Hours, and Jurisdiction Next Steps 11.6 After Journeyman: Master, Contractor, and Continuing Education
11.5 License Application, Work Hours, and Jurisdiction Next Steps
Key Takeaways Explain This Topic AI
ICC is not a licensing agency, so candidates must verify application, work-hour, supervision, fee, and license-issuance requirements with the jurisdiction where they plan to work.
Do not assume one national journeyman work-hour rule; requirements vary by jurisdiction and license class.
The safest application file separates board requirements from ICC/Pearson VUE exam logistics.
A passing exam result should be treated as one document in a larger licensing package until the jurisdiction issues or recognizes the license.
Last updated: May 2026
Passing the exam is not the whole license file
The most important licensing fact in this chapter is also the easiest to forget: ICC is not a licensing agency. ICC contractor/trades exams provide information that licensing agencies may use. A jurisdiction may accept R17-N, T17-N, G17-N, another ICC exam, a state-developed exam, or a local process. The jurisdiction decides the license class, eligibility rules, application forms, work experience documentation, fees, and legal authority to work.
Most states require electricians to be licensed, and the occupation is commonly entered through apprenticeship or supervised training. Those are useful national background facts. They do not create one universal journeyman work-hour number. Do not copy a requirement from another state, a training provider, or a forum and assume it applies to your application.
Build the jurisdiction file before you test
A candidate should know the licensing path before paying for an exam. Your board may require preapproval before scheduling. It may require an application before the exam, after the exam, or both. It may ask employers to verify experience on official forms. It may distinguish residential, journeyman, maintenance, master, contractor, low-voltage, sign, elevator, or specialty licenses.
Use a file with these fields:
Field What to record
Licensing authority State board, city, county, or other agency name.
License class Exact title of the license you want.
Accepted exam R17-N, T17-N, G17-N, state exam, or other requirement.
NEC edition Edition tied to the exam or local adoption.
Work experience Board-stated requirement, with no assumptions from other jurisdictions.
Verification method Employer form, apprenticeship record, affidavit, transcript, or other board method.
Fees Application, exam, license, renewal, and late fees if listed.
Timing Application window, authorization expiration, result expiration, renewal cycle.
Scope What work the license allows and what still requires supervision or contractor status.
Work hours and experience
Work-hour requirements are jurisdiction-specific. Some authorities count apprenticeship hours, some require supervised employment, some distinguish residential and commercial work, and some require experience under a licensed contractor or master electrician. Some boards accept classroom hours toward part of a requirement; others do not. Some require notarized employer statements or direct submission by the employer.
Because the rules vary, this guide does not invent a number. Your task is to verify the exact requirement with the board that will issue the license. Write down the source date and keep a copy of the rule. If you are close to the requirement, ask the board how it counts part-time work, military experience, out-of-state work, self-employment, maintenance work, or apprenticeship completion.
After a passing result
Once you pass, treat the result as a document to attach or report, not as the license itself. Check whether ICC sends the result to the jurisdiction automatically or whether you must submit it. Confirm whether the score report expires. Confirm whether you need to complete a background question, insurance statement, bond, continuing education proof, or fee before the license is issued.
Do not advertise, contract, pull permits, or work outside your current legal authority just because you passed. A journeyman individual license may not allow you to operate an electrical contracting business. Contractor licensing, business registration, bonding, insurance, permit rights, and master electrician responsibilities are separate in many jurisdictions.
If you are moving or working across borders
Electrical work often crosses city, county, or state lines. A license in one place may not authorize work in another. Reciprocity, endorsement, temporary license, local registration, or additional exam rules are jurisdiction questions. Ask the receiving authority whether it recognizes your existing license or ICC result, whether additional experience documentation is required, and whether local amendments or business licenses apply.
Application trap: mismatched names and dates
Small paperwork errors can delay a license. Make sure your name on the exam registration, identification, application, apprenticeship records, and employer forms matches or is supported by legal documentation. Track dates carefully. If an authorization to test expires, passing after that date may create a board problem even if the test provider allowed scheduling.
Practical next-step sequence
A conservative sequence looks like this:
Identify the licensing authority and exact license class.
Confirm accepted exam and NEC edition.
Confirm whether preapproval is required before Pearson VUE registration.
Gather work experience records using the board's method.
Schedule and pass the exam using the approved references.
Submit the result and remaining application materials.
Wait for license issuance or recognition before expanding your work scope.
Calendar renewal and continuing education requirements immediately.
This sequence keeps you from treating the exam as a shortcut around licensing. It also helps you avoid studying the wrong NEC edition or taking an exam that your board does not accept.