Study guide
2.3 Index, Table, and Annex Navigation
Journeyman Electrician Study Guide Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Exam Orientation and Source Control
1.1 ICC R17, T17, G17, and Jurisdiction Variance 1.2 Current Format, Cost, Time, and Passing Score 1.3 Licensing Board vs. Exam Provider 1.4 Official References, Open-Book Rules, and Calculators 1.5 Domain Weights and Study Map 1.6 Using the Practice Bank, Error Log, and NEC Index
2 Chapter 2: NEC Navigation, Definitions, and Code Strategy
2.1 NEC Book Structure and Article Map 2.2 Article 100 Definitions and Exam Language 2.3 Index, Table, and Annex Navigation 2.4 Shall, Shall Not, Permitted, and Informational Notes 2.5 Using Code References Without Overlooking Context 2.6 State Amendments and Code Edition Control 2.7 NEC Navigation Case Lab
3 Chapter 3: Electrical Theory and Calculation Foundations
3.1 Ohm's Law, Power, and Basic Units 3.2 Series, Parallel, and Circuit Behavior 3.3 Single-Phase, Three-Phase, and Voltage Systems 3.4 Continuous Loads, Demand, and 125 Percent Rules 3.5 Voltage Drop and Practical Calculation Setup 3.6 Load Calculation Workflow 3.7 Calculation Foundation Case Lab
4 Chapter 4: Services, Service Equipment, and Grounding/Bonding
4.1 Service Point, Service Conductors, and Disconnects 4.2 Service Load Calculation and Sizing 4.3 Service Equipment, Panelboards, and Switchboards 4.4 Grounding Electrode System and GEC 4.5 Bonding, Main Bonding Jumpers, and Effective Fault Path 4.6 Transformers and Separately Derived Systems 4.7 Services and Grounding Case Lab
5 Chapter 5: Feeders, Branch Circuits, and Conductor Sizing
5.1 Feeder vs. Branch Circuit Boundaries 5.2 Branch Circuit Ratings and Required Outlets 5.3 Conductor Ampacity, Temperature, and Terminal Ratings 5.4 Adjustment, Correction, and More Than Three Conductors 5.5 Overcurrent Protection and Small-Conductor Rules 5.6 GFCI, AFCI, Equipment Grounding, and Dwelling Circuits 5.7 Feeders and Branch Circuits Case Lab
6 Chapter 6: Wiring Methods, Raceways, Boxes, and Cables
6.1 Raceway Selection and Installation Logic 6.2 Underground Wiring, Wet Locations, and Protection 6.3 Boxes, Enclosures, and Conduit Bodies 6.4 Box Fill, Conductor Counting, and Device Yokes 6.5 Cabinets, Panelboards, and Switchboards 6.6 Flexible Cords, Cables, and Temporary Wiring 6.7 Wiring Methods Case Lab
7 Chapter 7: Equipment, Devices, Luminaires, and Controls
7.1 Receptacles, Switches, and Device Selection 7.2 Luminaires, Lampholders, and Lighting Outlets 7.3 Appliances and Utilization Equipment 7.4 Heating, Cooling, and HVAC Electrical Connections 7.5 Disconnects, Controllers, and Switching Devices 7.6 Equipment Grounding, Bonding, and Listing Markings 7.7 Equipment and Devices Case Lab
8 Chapter 8: Motors, Generators, Transformers, and Special Equipment
8.1 Motor Circuit Anatomy and Article 430 Navigation 8.2 Motor Conductors, Overload, and Short-Circuit Protection 8.3 Motor Controllers, Disconnects, and Nameplates 8.4 Generators, Transfer Equipment, and Optional Standby 8.5 Transformer Sizing, Protection, and Grounding 8.6 Emergency Systems, Fire Alarms, and Signaling Overview 8.7 Motors and Generators Case Lab
9 Chapter 9: Special Occupancies, Renewables, and Safety
9.1 Hazardous Classified Locations 9.2 Healthcare, Marinas, RV Parks, and Mobile Home Parks 9.3 Pools, Spas, and Similar Installations 9.4 Solar PV, Energy Storage, and Renewable Systems 9.5 Temporary Power, Emergency Systems, and Special Conditions 9.6 OSHA Subpart K and Safe Work Practice Context 9.7 Special Occupancies Case Lab
10 Chapter 10: Open-Book Exam Workflow and Mixed Code Labs
10.1 Four-Hour Pacing and Question Triage 10.2 Look-Up vs. Know-From-Memory Decisions 10.3 Mixed Calculation Lab 10.4 Mixed Code Navigation Lab 10.5 Diagnostic Report and Error Log Remediation 10.6 High-Weight Domain Remediation Plan 10.7 Full Exam Simulation Playbook
11 Chapter 11: Final Review, Test Day, and License Planning
11.1 Final Two-Week Study Plan 11.2 Reference Book, Tabs, and Allowed Materials Checklist 11.3 Pearson VUE, PRONTO, and Test-Day Rules 11.4 After the Exam: Results, Retakes, and Challenges 11.5 License Application, Work Hours, and Jurisdiction Next Steps 11.6 After Journeyman: Master, Contractor, and Continuing Education
2.3 Index, Table, and Annex Navigation
Key Takeaways Explain This Topic AI
The table of contents is best for known article families; the index is best when you have a topic word but not an article.
Tables must be read with their titles, notes, column headings, and conditions of use.
Chapter 9 tables are common for raceway fill and conductor dimensions, but many sizing rules live in article-specific tables.
Informative annexes can help explain or calculate, but the enforceable rule must be traced back to code text unless the jurisdiction adopts otherwise.
Open-book speed improves when tabs, index practice, and table-reading habits are trained before exam day.
Last updated: May 2026
Choosing the right navigation tool
The NEC has more than one map. The table of contents, article headings, index, tables, and informative annexes all help, but they solve different problems. A skilled open-book test taker does not always start with the index. If you already know the article family, the table of contents and tabs are faster. If you only know a topic word, the index can get you close. If the problem asks for a number, a table may be the final step, but only after the correct rule tells you which table applies.
Use the table of contents when the question already names the system layer. Branch circuits, feeders, services, grounding and bonding, wiring methods, motors, pools, and photovoltaic systems all have recognizable article families. Use the index when the stem uses a topic that could appear in several places, such as kitchen, sign, garage, disconnect, receptacle, transformer, tap, or derating. The index may list several destinations; choose the one that matches the noun and condition in the stem.
- Tool Best use Exam caution
- Table of contents Jump to an article when you know the family It may not show every subsection detail
- Index Find a topic when the article is unclear It can send you to several places; verify context
- Article headings Confirm you are in the right part Nearby text may apply to a different part
- Tables Select numeric values, sizes, areas, or conditions Read title, notes, units, and column labels
Informative annexes Support calculations or background understanding They are generally informational unless adopted by authority
Index strategy
The index is powerful but slow if used blindly. Search from the most code-like noun, not the longest phrase in the question. If a stem says receptacle spacing above a dwelling kitchen countertop, index entries for receptacles, dwelling units, countertops, and kitchens may all appear. The best first article is still the branch-circuit and receptacle outlet article family. If the stem says flexible metal conduit support, use the wiring method name rather than the word support alone.
When the index offers multiple entries, do not jump to the first one and stop. Read the subentries. A topic such as disconnecting means may be listed under services, motors, appliances, air-conditioning equipment, and emergency systems. The installation described in the stem decides the path. The wrong index entry can land you in a valid NEC rule that is valid for the wrong equipment.
Tabs should support this process. Permanent tabs for high-frequency articles can save time if allowed by the testing rules and jurisdiction. ICC guidance for contractor exams generally allows bound copyrighted references with ink notes and permanently attached tabs, while loose papers are prohibited. Always confirm current rules for the exam delivery method and jurisdiction before test day.
Table reading habits
Tables are where many candidates lose points because they grab a number without reading the conditions. A table has a title, column labels, row labels, units, notes, and sometimes references back to a rule. Before using any value, ask: What does this table measure? What installation condition does it assume? What temperature, material, raceway, conductor type, or number of conductors applies? Are there notes that change the value?
Chapter 9 is common for raceway fill. A typical conduit-fill problem may require conductor dimensions from one table, raceway area from another table, and a percentage fill limit from a separate table. The final answer is not in the first table you open. The process is usually:
Identify the raceway type and trade size.
Identify each conductor type and size.
Determine the allowed fill percentage for the number of conductors.
Compare total conductor area to allowable raceway area.
Select the smallest raceway that satisfies the rule, if the question asks for minimum size.
Other tables are embedded inside articles. Motor full-load current tables are in Article 430. Grounding and bonding tables are in Article 250. Conductor ampacity tables are tied to Article 310. Box fill values are tied to Article 314. Do not assume every numerical NEC answer lives in Chapter 9.
Annex use without overreliance
Informative annexes can be useful study tools. Some provide examples, calculations, or background that clarify how rules work together. However, informative material is not the same as mandatory code text unless the authority having jurisdiction adopts it or a specific rule makes it relevant. On an exam, use annex material to understand, but trace the enforceable answer back to an article, section, table, or adopted reference.
Voltage drop is a good example of context. Informational material may provide guidance for efficient design, and many electricians study voltage drop formulas because exams may ask design or calculation questions. But the enforceable answer depends on the exact stem and listed references. If the question asks for a recommended design value, informational guidance may matter. If it asks for a code minimum conductor ampacity, use the mandatory ampacity rule.
Mini lab: table path versus index path
Problem A says: What is the maximum number of 12 AWG THHN conductors in a specific trade size of EMT? The article family is Chapter 3 and the calculation points to Chapter 9. You need conductor area, raceway area, and fill percentage. The index may help if you forget where conduit fill tables live, but the real work is table reading.
Problem B says: What is the required working clearance for equipment operating at a given voltage? You might index working space or equipment clearance, then verify the rule in the article governing spaces about electrical equipment. The final answer may be in a table that depends on voltage and conditions. Reading the column headings is just as important as finding the table.
Problem C says: A motor branch circuit uses a particular horsepower, voltage, and phase. The first move is Article 430, not a general conductor table. Motor rules often tell you to use code motor current tables rather than a nameplate current for certain calculations. The stem will usually tell you which value to use if you read it carefully.
Good navigation is not one tool. It is choosing the right tool for the stage of the problem. Contents and tabs get you to the article. The index rescues uncertain topics. Tables give values only after the rule points to them. Annexes help you learn and sometimes calculate, but the scored answer should be anchored in the listed code reference.