Study guide

Formulations, Compatibility, and Mixing

Kansas Pesticide Applicator Study Guide Exam

Track your progress as you read

Finished sections get a check mark.

1 Kansas Laws and Licensing

Kansas Applicator License Types and Exam Map Kansas Pesticide Statutes and KDA Authority Restricted-Use Pesticides and Supervision Recordkeeping, Renewal, and Continuing Education Dealer, Business Duties, and Enforcement

2 Labels, Formulations, and Safety

Label Parts, Signal Words, and Directions Formulations, Compatibility, and Mixing PPE, Toxicology, and First Aid Worker Protection Standard Handler Duties Spill Response, Storage, and Transport

3 Environment, Drift, and IPM

3.1 Groundwater, Surface Water, and Sensitive Sites 3.2 Drift Management and Weather 3.3 Integrated Pest Management Basics 3.4 Resistance Management and Modes of Action 3.5 Pollinators, Endangered Species, and Neighbors

4 Application and Calibration

4.1 Equipment, Nozzles, and Coverage 4.2 Calibration Math and Rate Calculations 4.3 Application Methods and Site Selection 4.4 Category Exam Strategy and Kansas Review 4.5 Timed Practice and Last-Week Plan

Formulations, Compatibility, and Mixing

Key Takeaways Explain This Topic AI

Formulation codes (EC, WP, SC, G, S) determine handling hazards, equipment needs, and agitation requirements.

Wettable powders create inhalation risk and require continuous agitation; emulsifiable concentrates increase dermal absorption risk.

Perform a compatibility jar test before large tank mixes and add products in label-recommended order with water first.

A true solution (S formulation) dissolves completely in water and does not settle like suspensions or wettable powders.

Compatibility alone does not make a tank mix legal—each label must permit the combination and carrier.

Last updated: July 2026

Formulations, Compatibility, and Mixing

Quick answer: Formulation type determines how the active ingredient is delivered, what equipment you need, and which handling hazards appear in the field. Kansas applicators must read formulation abbreviations on every label and follow safe mixing order.

The General exam regularly tests whether you can match formulation codes—WP, EC, SC, G, F, and others—to handling requirements, nozzle selection, and compatibility risks. A mistake at the mixing stage affects every acre sprayed afterward and can injure crops, clog equipment, or expose handlers to concentrated dusts or solvents.

What Formulations Are

A pesticide formulation combines the active ingredient (AI) with carriers, solvents, emulsifiers, and adjuvants so the product can be stored, transported, and applied effectively. The same AI may be sold in multiple formulations with different hazard profiles and application methods.

Code Name Characteristics Kansas handling notes

EC Emulsifiable concentrate Oil-based; mixes with water High dermal absorption risk; may phytotoxic in hot weather

  • WP Wettable powder Dry powder; suspends in water Inhalation hazard when pouring; requires constant agitation
  • SC Suspension concentrate Fine particles suspended in liquid Needs agitation; lower dust than WP

WDG/DF Water-dispersible granule / dry flowable Granules dissolve in water Less dust than WP; still needs agitation

  • G Granular Ready-to-use particles Low drift; placement accuracy matters
  • F Flowable Liquid suspension Agitation required
  • S Solution AI fully dissolved True solution; no settling
  • AE Aerosol Pressurized Inhalation and fire risks
  • B Bait Food-based attractant Protect from non-target animals and children
  • Choosing and Handling by Formulation

Liquid concentrates (EC, SC, F) pour easily but splash onto skin and eyes. Wear chemical-resistant gloves, eye protection, and aprons as the label requires. Dry formulations (WP, DF, WDG) create hazardous dust when measured; avoid shaking bags overhead and use calm-air mixing areas when possible.

Granular formulations reduce drift compared with sprays, making them useful near sensitive areas, but wind can still move particles. Place granules as the label directs—especially near streams in eastern Kansas or irrigation ditches in the High Plains.

Compatibility and the Jar Test

Tank mixing is common in Kansas row-crop and turf operations, but not all products are compatible. Incompatible mixes form gels, oils, or precipitates that clog screens, nozzles, and pumps.

Before filling a large tank:

  • Read each label for compatibility statements
  • Perform a compatibility jar test with proportional amounts in water
  • Add products in the recommended mixing sequence
  • Maintain continuous agitation during mixing and application

Typical mixing order (always defer to the label when it differs):

  • Step Product type Why
  • 1 Water (partial tank) Provides dilution base
  • 2 Water conditioners / pH adjusters Stabilize water if needed
  • 3 Wettable powders, dry flowables, WDGs Disperse solids first
  • 4 Flowables, suspension concentrates Add suspensions after powders
  • 5 Emulsifiable concentrates Oils added after solids
  • 6 Adjuvants / surfactants Often last unless label says otherwise
  • 7 Water to final volume Complete fill with agitation

Never add multiple concentrates together undiluted in the bottom of a dry tank.

Agitation and Settling

Agitation keeps suspended particles evenly distributed. Without it, the first acres receive overdose and later acres receive underdose. Wettable powders and flowables settle during long spray days common in Kansas wheat and corn windows.

Formulation-Related Exam Scenarios

Expect questions such as:

  • Which formulation dissolves completely to form a true solution? ( Solution/S )
  • Why is inhalation risk highest when handling wettable powders? (Fine airborne particles during pouring)
  • What should you do before combining three unfamiliar products? (Compatibility jar test)
  • An EC plus copper fungicide mix turns cottage-cheese texture—what failed? (Chemical incompatibility)

Understanding adjuvants —surfactants, crop oils, drift retardants—matters because they change droplet size and plant coverage. Add adjuvants only when every product label in the tank permits them. In Kansas chemigation systems, also verify whether the irrigation district restricts certain carriers or active ingredients near municipal intakes.

Kansas Field Example

A custom applicator in central Kansas plans a tank mix of herbicide WP, insecticide EC, and liquid fertilizer for chemigation. The herbicide label prohibits fertilizer carriers. Even if products appear compatible in a jar, the fertilizer prohibition makes the mix illegal. Choose a different carrier or sequential applications—compatibility is necessary but not sufficient.

  • Common Traps
  • Assuming all granules are "safe" and need no PPE
  • Skipping agitation on suspension products during long fields
  • Mixing by convenience rather than label order
  • Ignoring temperature limits—some EC products volatilize in afternoon Kansas heat
  • Using food-grade containers for pesticide mixing
  • Study Checklist
  • Flash-card formulation codes with handling and agitation needs
  • Practice jar-test and mixing-order questions
  • Link EC products to dermal and phytotoxicity risks
  • Link WP products to inhalation and agitation needs
  • Always check each label before tank mixing