Study guide

16.1 Surety and Fidelity Bonds

Kansas Property & Casualty Insurance State

Track your progress as you read

Finished sections get a check mark.

1 Standalone Coverage Map

Standalone Coverage Map

2 Introduction: Kansas Property & Casualty Insurance Exam Overview

Kansas Property & Casualty Exam Overview

3 National Portion: Insurance Fundamentals

1.1 Risk, Hazards, Perils, and the Law of Large Numbers 1.2 Insurable Interest, Indemnity, and Other Insurance Principles 1.3 Insurance Contract Law and Elements 1.4 Policy Structure: Declarations, Insuring Agreement, Conditions, Exclusions 1.5 Parties, Agents vs. Brokers, and Authority

4 National Portion: Property Insurance Concepts

2.1 Causes of Loss / Named-Peril vs. Open-Peril 2.2 Valuation: ACV, Replacement Cost, and Functional Value 2.3 Coinsurance and the Coinsurance Formula 2.4 Deductibles, Limits, and Loss Settlement 2.5 Common Property Policy Conditions and Clauses

5 National Portion: Dwelling Policies (DP)

3.1 Dwelling Policy Forms DP-1, DP-2, DP-3 3.2 Dwelling Coverages A-E and Other Coverages 3.3 Dwelling Perils, Conditions, and Endorsements 3.4 Mobile Home and Specialized Dwelling Coverage

6 National Portion: Homeowners Policies - Forms & Section I

Homeowners Forms HO-2 through HO-8 and Eligibility Section I Coverages A-D and Additional Coverages Section I Perils Insured Against and Exclusions Replacement Cost vs. ACV and Loss Settlement in Homeowners

7 National Portion: Homeowners Policies - Section II & Endorsements

5.1 Section II Coverages E (Liability) and F (Medical Payments) 5.2 Homeowners Conditions and Duties After Loss 5.3 Common Homeowners Endorsements

8 National Portion: Personal Auto Policy - Liability & Injury

6.1 Personal Auto Policy Structure and Eligibility 6.2 Part A Liability and Supplementary Payments 6.3 Part B Medical Payments 6.4 Part C Uninsured/Underinsured Motorists

9 National Portion: Personal Auto Policy - Physical Damage & Duties

7.1 Part D: Coverage for Damage to Your Auto 7.2 Part D Exclusions and Part E Duties After an Accident 7.3 Part F General Provisions, Endorsements, and No-Fault Concepts

10 National Portion: Liability Insurance Concepts

8.1 Negligence, Torts, and Legal Liability 8.2 Defenses, Damages, and Vicarious Liability 8.3 Occurrence vs. Claims-Made Triggers 8.4 Bodily Injury, Property Damage, and Personal/Advertising Injury

11 National Portion: Commercial Property Insurance

9.1 Commercial Package Policy Structure and Common Policy Conditions 9.2 Building and Personal Property Coverage Form (BPP) 9.3 Causes of Loss Forms (Basic, Broad, Special) 9.4 Business Income and Extra Expense 9.5 Commercial Property Endorsements and the BOP

12 National Portion: Commercial General Liability - Coverages

10.1 CGL Coverage A: Bodily Injury and Property Damage Liability 10.2 CGL Coverage B: Personal and Advertising Injury, Coverage C: Medical Payments 10.3 Who Is an Insured and Supplementary Payments

13 National Portion: Commercial General Liability - Limits, Triggers & Exclusions

11.1 CGL Limits of Insurance and Aggregates 11.2 Occurrence vs. Claims-Made CGL and Retroactive Dates 11.3 Key CGL Exclusions and Endorsements

14 National Portion: Commercial Auto Insurance

12.1 Business Auto Coverage Form and Covered Auto Symbols 12.2 Commercial Auto Liability and Physical Damage 12.3 Motor Carrier / Trucking and MCS-90 12.4 Garage Coverage Form and Garagekeepers 12.5 Commercial Auto Endorsements

15 National Portion: Workers Compensation

13.1 Workers Compensation Statutory Background and Benefits 13.2 Part One (Workers Comp) and Part Two (Employers Liability) 13.3 Premium Basis, Experience Modification, and Classification 13.4 Other States, USL&H, and Federal Acts 13.5 Workers Comp Exclusions and Endorsements

16 National Portion: Other Commercial Lines - BOP, Crime & Marine

14.1 Businessowners Policy (BOP) in Depth 14.2 Crime and Fidelity Coverage 14.3 Inland Marine and Nationwide Marine Definition 14.4 Ocean Marine Coverages (Hull, Cargo, Freight, P&I)

17 National Portion: Other Commercial Lines - Specialty & Professional

15.1 Farm and Agricultural Coverage 15.2 Commercial Umbrella and Excess Liability 15.3 Professional Liability and Errors & Omissions 15.4 Directors & Officers and Employment Practices Liability

18 National Portion: Other Commercial Lines - Surety, Flood & Specialty

16.1 Surety and Fidelity Bonds 16.2 National Flood Insurance Program (NFIP) 16.3 Cyber, Aviation, and Other Specialty Lines

19 National Portion: Insurance Regulation & Market Conduct

17.1 State Regulation, Licensing, and the McCarran-Ferguson Act 17.2 Rates, Forms, Solvency, and Guaranty Associations 17.3 Producer Authority, Fiduciary Duty, and Company Operations

20 National Portion: Ethics & Unfair Trade Practices

18.1 Unfair Trade Practices and Unfair Claims Settlement 18.2 Producer Ethics, Errors & Omissions Exposure, and Fiduciary Conduct 18.3 Privacy, Fraud, and Consumer Protection

21 Chapter 1: Kansas P&C Insurance Regulation & Licensing

1.1 Kansas Insurance Department 1.2 Kansas Producer Licensing Requirements 1.3 Continuing Education & License Renewal 1.4 Producer Responsibilities & Duties

22 Chapter 2: Kansas Property Insurance

2.1 Kansas Homeowners Insurance 2.2 Kansas Severe Weather Coverage 2.3 Kansas FAIR Plan 2.4 Kansas Commercial Property Insurance

23 Chapter 3: Kansas Casualty & Auto Insurance

3.1 Kansas Auto Insurance Requirements 3.2 Kansas Workers' Compensation

24 Chapter 4: Kansas Ethics & Professional Conduct

4.1 Foundations of Ethical Conduct 4.2 Prohibited Practices in Kansas 4.3 Kansas Consumer Protection 4.4 Kansas Licensing and Continuing Education

16.1 Surety and Fidelity Bonds

Key Takeaways Explain This Topic AI

Surety is a three-party agreement (principal, obligee, surety) guaranteeing performance or payment; insurance is a two-party indemnity contract, and the surety expects reimbursement from the principal after paying a claim

Construction surety uses three bonds under the federal Miller Act: bid bonds, performance bonds, and payment bonds; the Little Miller Acts apply the same scheme at the state level

Fidelity bonds (the ISO Commercial Crime CR 00 21 / CR 00 22 program) protect an employer against loss from dishonest employees, while surety bonds protect a third-party obligee

The penal sum is the maximum the surety will pay; unlike insurance, the surety has a right of subrogation/indemnity against its own principal for any loss it pays

Common exam traps: surety expects no losses (loss ratio near zero), bid bond pays the difference up to the bond penalty, and ERISA pension plans require fidelity coverage of at least 10% of funds handled

Last updated: June 2026

Surety Is a Three-Party Guarantee, Not Insurance

A surety bond is a three-party agreement in which the surety guarantees to the obligee that the principal will perform a specified obligation. Compare this to an insurance contract, which has only two parties (insurer and insured) and transfers risk so the insured is indemnified for a fortuitous loss.

Quick Answer: In surety, the principal buys the bond, the obligee is protected, and the surety pays the obligee but expects full reimbursement from the principal.

The three roles map cleanly onto a construction job:

  • Party Role Construction Example
  • Principal Owes the obligation; buys the bond The contractor
  • Obligee Protected party; demands the bond The project owner
  • Surety Guarantees the principal's performance The bonding company

Because the surety expects reimbursement, surety underwriting resembles credit underwriting : it examines capital, capacity, and character (the "three C's") and expects a loss ratio near zero . A surety that pays a claim pursues the principal for indemnity. This right of indemnity against its own principal is the biggest contrast with insurance, where the insurer has no recovery right against its insured.

The Three Construction Bonds and the Miller Act

Federal construction contracts over a threshold are governed by the Miller Act , which requires three bonds. Most states adopt Little Miller Acts mirroring it.

Bid Bond

Guarantees that if the contractor wins the bid, it will enter the contract and furnish the required performance/payment bonds. If the low bidder backs out, the bid bond pays the obligee the difference between the defaulting bid and the next-lowest bid , up to the bond's penal sum.

Performance Bond

Guarantees the contractor will complete the project per the contract. On default, the surety may finance the original contractor, re-let the job to a completion contractor, or pay the obligee — up to the penal sum (the bond's maximum).

Payment Bond (Labor & Material Bond)

Guarantees that subcontractors and material suppliers are paid. Because a federal project cannot have a mechanic's lien filed against public property, the payment bond is the suppliers' substitute remedy.

Worked Example: Bid Bond Penalty

A contractor submits a $2,000,000 bid backed by a 10% bid bond (penal sum $200,000). After winning, it refuses to sign. The next-lowest responsible bid is $2,150,000. The obligee's extra cost is $2,150,000 - $2,000,000 = $150,000 . Because $150,000 is below the $200,000 penal sum, the surety pays the full $150,000. Had the next bid been $2,300,000 (a $300,000 gap), the surety would pay only the $200,000 penal sum — the obligee absorbs the excess.

Other Surety Bonds

License & permit bonds — guarantee a licensee complies with the law (e.g., a contractor or insurance agent bond).

Court / judicial bonds — fiduciary bonds (administrators, guardians) and judicial bonds (appeal, injunction).

Public official bonds — guarantee an officeholder's faithful performance.

Maintenance, Supply, and Subdivision Bonds

Surety extends beyond the three core construction bonds. A maintenance bond guarantees the contractor will repair workmanship and material defects for a stated period (commonly one to two years) after the project is accepted. A supply bond guarantees a vendor will deliver supplies or materials per a purchase contract.

A subdivision (or completion) bond guarantees a developer will build the public improvements — roads, sewers, sidewalks — a municipality requires before approving a plat. All of these are still three-party guarantees protecting an obligee, and the surety still retains its indemnity right against the principal.

Quick Answer: Any bond naming a principal, an obligee, and a guarantor is surety — the surety expects reimbursement, unlike an insurer.