Study guide
13.3 Phase I Advanced Nail Techniques: 45 Minutes
Louisiana Nail Technician License Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Louisiana Licensing Laws & LSBC Regulations
1.1 Louisiana Board, Governing Law & Inspection Authority 1.2 Qualifications, 500-Hour Education, Examinations & Reciprocity 1.3 Renewal, Expiration, Restoration & Certificate Display 1.4 Salon Licensing, Work Locations & Facility Standards
2 Chapter 2: Louisiana Salon Safety & Operational Standards
2.1 LAC §709 Required Manicuring-Salon Equipment 2.2 Prohibited Implements, Substances & Scope Boundaries 2.3 Blood Exposure Response & Exposure Prevention 2.4 Inspections, Citations, Hearings & Penalties
3 Chapter 3: Infection Control Science & Microbiology
3.1 Microbiology, Bacteria & the Chain of Infection 3.2 Viral Pathogens & Bloodborne Disease Transmission 3.3 Fungal & Parasitic Infections in Nail Care 3.4 Cleaning, Disinfection, Sterilization & Regulatory Terms
4 Chapter 4: Disinfection Procedures & Chemical Safety
4.1 Registered Disinfectants, Labels & Wet Contact Time 4.2 Multi-Use vs Single-Use Implement Care 4.3 OSHA Standards, Safety Data Sheets & Hazardous Communication 4.4 Salon Ventilation, Vapor Extraction & Ergonomics
5 Chapter 5: Natural Nail Anatomy & Physiology
5.1 The Natural Nail Unit & Structural Anatomy 5.2 Nail Growth, Matrix Dynamics & Keratinization 5.3 Nail Structure Chemistry & Histology
6 Chapter 6: Nail Disorders, Diseases & Client Consultation
6.1 Common Nail Disorders & Service Adaptations 6.2 Nail Diseases, Infections & Contraindications 6.3 Client Consultation, Service Screening & Referral
7 Chapter 7: Skin & Skeletal Anatomy of Extremities
7.1 Histology of the Skin & Cutaneous Layers 7.2 Osteology of the Hands, Wrists, Feet & Ankles 7.3 Myology & Neurology of the Extremities 7.4 Circulatory & Lymphatic Systems of the Extremities
8 Chapter 8: Product Chemistry & Nail Enhancement Science
8.1 Monomer & Polymer Chemistry & Polymerization 8.2 Adhesion, Surface Preparation, Dehydrators & Primers 8.3 Liquid-and-Powder, Gel & Powder-Dip Systems 8.4 Chemical Storage, Fire Prevention, Spills & Disposal
9 Chapter 9: Basic & Specialized Manicure Services
9.1 Manicure Table Setup, Implements & Ergonomics 9.2 Step-by-Step Water Manicure Procedure 9.3 Classical Hand & Arm Massage Techniques 9.4 Specialized Manicures, Paraffin & Polish Application
10 Chapter 10: Pedicure Services & Foot Care Safety
10.1 Pedicure Equipment, Tools & Ergonomic Setup 10.2 Step-by-Step Professional Pedicure Protocol 10.3 Pedicure Basin Cleaning & Sanitation 10.4 Higher-Risk Pedicure Clients & Referral Decisions
11 Chapter 11: Artificial Nail Enhancements: Tips, Wraps & Acrylics
11.1 Nail Tip Selection, Sizing & Blending 11.2 Fabric Wrap Application, Repair & Maintenance 11.3 Liquid-and-Powder Sculpting, Forms & Structural Balance 11.4 Enhancement Maintenance, Lifting & Rebalancing
12 Chapter 12: Light-Cured Gels & Electric Filing
12.1 Light-Cured Gel Systems, Lamps & Complete Cure 12.2 Electric File Components, Bits & Equipment Selection 12.3 Electric Filing Technique, Heat Control & Safety 12.4 Safe Enhancement Removal & Natural-Nail Protection
13 Chapter 13: LSBC Practical Examination & Professional Salon Practice
13.1 Current LSBC Practical Logistics, Supplies & Setup 13.2 Phase II Manicure: 30-Minute Performance 13.3 Phase I Advanced Nail Techniques: 45 Minutes 13.4 Professional Ethics, Booth Rental & Salon Operations
13.3 Phase I Advanced Nail Techniques: 45 Minutes
Key Takeaways Explain This Topic AI
Phase I allows 45 minutes for three advanced-nail tasks.
Perform a nail tip with acrylic overlay.
Sculpt a nail using a form.
Repair a nail using a silk wrap.
The bulletin does not publish official task-by-task time splits, C-curve degrees, mix ratios, or a separate blood-spill task.
Last updated: September 2026
Phase I Advanced Nail Techniques: 45 Minutes
Phase I of the current Louisiana manicurist practical is Advanced Nail Techniques , with 45 minutes for three demonstrations: a nail tip with acrylic overlay, a sculptured nail using a form, and a nail repair with a silk wrap. The candidate works on nails attached to a mannequin hand or fingers as specified in the bulletin.
Nail tip with acrylic overlay
Select a tip that fits the prepared practice nail from sidewall to sidewall without forcing or pinching it. Apply adhesive according to its directions and place the tip with controlled contact so air is not trapped beneath it. Adjust length and shape safely. Prepare the surface only as needed for the product system, avoiding excessive abrasion of the underlying practice nail.
Apply the odorless liquid-and-powder overlay with the mix ratio and handling method specified by that product’s manufacturer. Control the material around the sidewalls and cuticle area, create balanced structure, and smooth the surface efficiently. The public bulletin requires the task but does not prescribe a universal 1.5-to-1 ratio, a 30-to-40-degree C-curve, or one required bead count.
Sculptured nail with a form
Fit the form beneath and in positioning with the free edge. A gap, downward tilt, or off-center form can distort the extension. Build the free edge and supporting structure with the odorless enhancement system. Maintain product control and avoid material on surrounding skin. Remove the form only when the enhancement has cured sufficiently under the product directions, then refine the shape and surface.
“Sculptured nail with form” is the official task. The form, rather than a preformed tip, supports creation of the extension. Practice form fitting on the same mannequin setup so the timed examination is not the first time you encounter its curvature.
Silk-wrap repair
Prepare the repair area gently. Cut a silk patch appropriate to the damaged area, handling it so oils and fraying do not interfere. Apply adhesive or resin compatible with the wrap system, place the silk smoothly, and build or seal the repair according to the manufacturer’s directions. Finish the surface so the repair is secure and blended without aggressive filing.
The bulletin calls this a nail repair with silk wrap. It does not require every candidate to perform a complete full-nail wrap, remove a tip well by a particular method, or follow an unpublished numeric repair dimension. Train for the named repair and follow examiner instructions.
One phase, personal pacing
The 45 minutes cover all three tasks. The bulletin does not assign official fifteen-minute or twenty-minute blocks to individual tasks. During rehearsal, measure how long each operation takes, then create a personal order and pacing buffer. That plan is a study technique, not an official rubric.
Maintain supply separation and safe product handling throughout. Close monomer when practical, control dust, avoid skin contact, and use ventilation available at the site. If contamination occurs, follow the examiner’s instruction and infection-control principles without improvising a task not listed in the bulletin.
At completion, each demonstration should visibly communicate the intended method: a correctly fitted tip under an overlay, a form-created extension, and a silk-supported repair. Check sidewalls, positioning, surface smoothness, structural balance, and cleanliness. Stop when time is called.
What not to memorize as official
The current public bulletin does not publish a numeric passing score, point values, required C-curve angle, universal bead ratio, task-specific minute split, or automatic-failure list. Those details may appear in private school rubrics or product systems, but they should not be attributed to LSBC without a current official source.
Three-task completion check
At the end of Phase I, an observer should be able to distinguish the construction method of each nail. The tip-and-overlay nail should show a fitted tip covered by the odorless enhancement. The sculptured nail should show an extension created with a form rather than another tip. The repaired nail should visibly use silk reinforcement. Practice the transition between tasks so resin, monomer, glue, and fabric remain organized and product does not contact skin. Evaluate positioning, attachment, structural balance, surface finish, and cleanliness, but do not invent official point values for those observations.
Product-system rehearsal
Because the bulletin requires odorless product, practice its set behavior before exam day. Odorless liquid-and-powder may handle differently from the candidate’s usual system, and unfamiliar timing can disrupt all three tasks. Verify that the primer, liquid, powder, brush, tip adhesive, wrap resin, and activator are mutually appropriate for their respective tasks. Do not combine systems merely to speed the phase. Familiar, compatible products reduce the temptation to compensate with an unsupported ratio or excessive filing.