Study guide

5.3 IBHS FORTIFIED Roof (2025 Standard), the Louisiana Fortify Homes Program & Louisiana FORTIFIED Incentives

Louisiana Residential Roofing Contractor Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Louisiana Licensing Law & Act 422 Regulatory Framework

1.1 Act 422 (2025): The Residential Roofing Classification, the $7,500 Threshold & Licensing Requirements 1.2 Act 239 (2025) Roof Permits & Inspections, Permit-Related Violations & Louisiana's Construction Code 1.3 LSLBC Enforcement: Violations, Cease-and-Desist Orders, Civil Fines & Criminal Penalties

2 Chapter 2: Louisiana Business Law, Contracts & Liens

2.1 Louisiana Private Works Act (La. R.S. 9:4801 et seq.): Privileges, Notices of Contract & Termination, and Lien Deadlines 2.2 Residential Roofing Contracts: Required Contents (R.S. 37:2159) & Property-Insurance Claim Rules (R.S. 37:2159.1) 2.3 Contractor Insurance (Liability & Workers' Compensation), the Statutory Employer Rule & Business Records

3 Chapter 3: Roofing Estimating, Plan Reading & Mathematics

3.1 Architectural Roof Plans, Symbols, Dimensions & Structural Pitch Calculations 3.2 Surface Area Calculations, Roofing Squares, Pitch Multipliers & Slope Formulas 3.3 Material Takeoff, Wastage Factors (Hips, Valleys, Rakes), and Jobsite Cost Estimating

4 Chapter 4: Roof Deck Preparation, Substrates & Re-Roofing Codes

4.1 Roof Deck Substrates (Plywood, OSB, Wood Board) & Structural Inspection Criteria 4.2 Reroofing Rules (IBC 1512 / IRC R908): Roof Replacement vs. Roof Recover, the Two-Layer Limit & Tear-Off Triggers 4.3 Deck Fastening, Nail Patterns, Damaged Sheathing Replacement & Clean Substrate Preparation

5 Chapter 5: Hurricane-Resistant Roofing, Wind Codes & FORTIFIED Standards

5.1 Louisiana Wind Speeds, Exposure, Wind-Borne Debris Regions & Roof Uplift Zones (IBC Chapter 16 / ASCE 7) 5.2 High-Wind Underlayment Rules (IBC Table 1507.1.1) & Sealed Roof Deck Options (Taped Seams, Two Layers, Full Self-Adhered) 5.3 IBHS FORTIFIED Roof (2025 Standard), the Louisiana Fortify Homes Program & Louisiana FORTIFIED Incentives 5.4 High-Wind Fastening Protocols: 6-Nail Shingle Patterns, Ring-Shank Nails & ASTM D3161/D7158 Wind Ratings

6 Chapter 6: Asphalt Shingles & Steep-Slope Assemblies

6.1 Asphalt Shingle Types (3-Tab vs. Laminated Architectural), ASTM Classifications & Thermal Behavior 6.2 Underlayment Specifications: Felt vs. Synthetic Underlayments & Self-Adhering High-Temperature Membranes 6.3 Shingle Application Mechanics: Starter Courses, Offsets, Fastener Placement & Wind Sealant Activation 6.4 Valley Construction Assemblies (Open Metal, Woven, Closed-Cut) & Ridge / Hip Cap Installations

7 Chapter 7: Metal, Tile, Slate & Wood Steep-Slope Systems

7.1 Metal Roof Panels & Metal Roof Shingles: Standing Seam, Exposed Fasteners, Minimum Slopes & Thermal Movement 7.2 Concrete & Clay Tile Roof Systems: Battens, Direct-to-Deck, Wind Uplift Resistance & Foam/Mortar Adhesion 7.3 Natural Slate & Synthetic Tile Roofing: Installation Fundamentals, Headlap & Fastening 7.4 Wood Shingles & Wood Shakes (IBC 1507.8–1507.9): Grades, Slopes, Sheathing, Exposure, Spacing & Fasteners

8 Chapter 8: Low-Slope Membranes & Built-Up Roofing (BUR)

8.1 Built-Up Roofing (BUR) Systems: Asphalt vs. Coal Tar Pitch, Organic/Glass Felts & Surfacings 8.2 Polymer-Modified Bitumen Systems: SBS vs. APP, Torched, Hot-Mopped, Cold-Adhesive & Self-Adhered Sheets 8.3 Single-Ply Roofing Membranes: TPO, PVC, and EPDM (Attachment Methods, Seam Welding & Ballast) 8.4 Low-Slope Rigid Insulation, Cover Boards, Vapor Retarders & Thermal Barriers

9 Chapter 9: Flashing, Penetrations & Roof Ventilation

9.1 Edge Metal & Drip Edge: Code Rules (IBC 1507.2.8.3 / IRC R905.2.8.5), FORTIFIED Upgrades & ES-1 Edge Securement 9.2 Step Flashing, Counterflashing, Chimney Crickets & Reglet Details 9.3 Plumbing Vents, Mechanical Exhausts, Skylight Curbs & Roof Penetration Seals 9.4 Attic Ventilation: Net Free Ventilating Area (1/150 vs. 1/300 Rule, IBC 1202.2 / IRC R806), Balanced Airflow & Unvented Attics

10 Chapter 10: Roof Drainage, Maintenance & Emergency Repairs

10.1 Roof Drainage Design: Primary Drains, Secondary Overflow Scuppers & Sizing Calculations 10.2 Gutters, Downspouts, Splash Blocks & Stormwater Runoff Management 10.3 Post-Storm Emergency Tarping, Temporary Shoring, Moisture Assessment & Insurance Scope Documentation

11 Chapter 11: OSHA Safety, Fall Protection & Jobsite Environmental Controls

11.1 OSHA 29 CFR 1926 Subpart M: Fall Protection Systems (Guardrails, Safety Nets, PFAS, Warning Lines & Monitors) 11.2 Ladder & Scaffolding Safety (29 CFR 1926 Subpart L & X, 4:1 Extension Rule, Tie-Off & Pitch) 11.3 PPE, Tool Safety, Hot Kettle/Torch Safety & Hazardous Material Communication (Lead, Asbestos, Silica) 11.4 Heat Illness Prevention & Louisiana High-Humidity Environmental Field Controls

5.3 IBHS FORTIFIED Roof (2025 Standard), the Louisiana Fortify Homes Program & Louisiana FORTIFIED Incentives

Key Takeaways Explain This Topic AI

FORTIFIED Home has three designation levels (Roof, Silver, Gold), and FORTIFIED Roof is the level roofing contractors deliver.

The 2025 FORTIFIED standard requires ring-shank roof-deck nailing at 4 inches on center, a sealed roof deck, and drip edge fastened at 4 inches on center, staggered, with 3-inch laps.

FORTIFIED asphalt shingles must be rated ASTM D7158 Class H and/or ASTM D3161 Class F and installed with the manufacturer's six-nail high-wind pattern.

The Louisiana Fortify Homes Program, run by LDI, awards grants of up to $10,000 by lottery; work begun before program approval is not eligible.

LDI Regulation 136 sets hurricane-premium discounts for FORTIFIED homes of 16% to 49% by zone and level, effective no later than January 1, 2027.

Last updated: September 2026

Why FORTIFIED Matters in Louisiana

Building codes set a life-safety minimum. They are not written to keep a roof watertight through a major hurricane. The Insurance Institute for Business & Home Safety (IBHS) , a research organization funded by insurers, created FORTIFIED Home to reduce storm damage. Its standards come from full-scale testing and from studying storm damage.

FORTIFIED has become a major part of Louisiana reroofing, driven by state grants, a tax credit, and required insurance discounts. FORTIFIED is voluntary . It is not required by the Louisiana construction code, although its details now show up in state rulemaking and insurance regulation. Know where the code ends and the program begins.

The Three Designation Levels

  • Level Focus Who does the work
  • FORTIFIED Roof Roof deck attachment, sealed deck, edges, rated covering Roofing contractor

FORTIFIED Silver Roof, plus protection of openings (windows, doors, garage doors), gable-end walls, and attached structures such as porches and carports General contractor and specialty trades

  • FORTIFIED Gold Silver, plus a continuous load path from roof to foundation General contractor with engineering
  • Core Roof Requirements (2025 FORTIFIED Home Standard)

The 2025 standard applies to both the Hurricane and High Wind programs. Its main roof requirements:

1. Qualified installer. All components of a FORTIFIED Roof must be installed by a qualified FORTIFIED Wise roofing contractor or company listed in the FORTIFIED Directory.

2. Remove to the deck and repair. Tear off all existing roofing and replace damaged wood. Minimum wood structural panel thickness is 7/16 inch . Board decks with gaps over 1/8 inch get a wood structural panel overlay.

3. Deck attachment.

New sheathing: minimum RSRS-01 (0.113 in. × 2-3/8 in.) ring-shank nails at 4 inches on center, maximum , in all areas of the roof.

Existing wood-panel decks: re-nail with additional 0.113-in. × 2-3/8-in. 8d ring-shank nails at 4 inches on center , long enough to penetrate at least 1-5/8 inches into the framing. New nails must be at least 2 inches from existing ones.

Exception: re-nailing is no longer required when reroofing a home already documented as FORTIFIED, with a wood-panel deck, on a site with Vult 160 mph or less and Exposure C or less.

Only full round-head ring-shank nails complying with ASTM F1667 are accepted; clipped heads are not.

4. Sealed roof deck. Use taped deck seams under underlayment, two layers of underlayment, or a full self-adhered membrane (Section 5.2).

5. Drip edge. Following FORTIFIED detail F-DE-1:

Metal drip edge at all eaves and gable rakes , installed over the underlayment , at least 26 gauge for steel.

Extends 1/2 inch below the sheathing and at least 2 inches back onto the roof.

Joints overlap at least 3 inches.

Fastened at 4 inches on center, maximum, staggered , with 12-gauge roofing nails complying with ASTM F1667. Cap nails and staples are not allowed.

Seal the drip edge, underlayment, and starter at the eave with a self-adhering starter strip or an 8-inch-wide layer of compatible flashing cement, 1/8 inch thick maximum , over the drip edge flange.

Note the difference from the code: the IBC puts underlayment over the drip edge at eaves (Section 9.1). FORTIFIED puts the drip edge over the underlayment and seals it.

6. Rated roof covering. Asphalt shingles must carry an ASTM D7158 Class H and/or ASTM D3161 Class F rating and be installed with six nails per the manufacturer's high-wind instructions. Starter strips go at eaves and rakes . Other coverings (metal, tile, wood, low-slope systems) must be rated and installed for the program's site wind and pressure criteria.

7. Coastal corrosion protection. Homes within 3,000 feet of saltwater shoreline need hot-dip galvanized or stainless steel fasteners and connectors, per the program's corrosion detail and technical bulletin.

8. Optional hail supplement. Asphalt shingles must meet the program's impact-resistance criteria, such as a "Good" or "Excellent" rating in IBHS's shingle hail ratings.

The Evaluator and the Designation

A certified FORTIFIED Evaluator documents the job with required photos at specific stages, especially deck nailing and the sealed deck before they are covered, and submits the file to IBHS. IBHS reviews it and issues the designation. The contractor installs; the evaluator verifies. Schedule the evaluator's in-progress visit before you cover the deck.

A FORTIFIED Roof designation lasts five years . To keep it, the homeowner has an evaluator reinspect the home. The certificate transfers when the home is sold.

The Louisiana Fortify Homes Program (LFHP)

The Louisiana Department of Insurance (LDI) runs the LFHP. LDI's program pages cite Act 554 of 2022 and LDI Regulation 126 as its legal basis. Key rules from those pages:

Grant: up to $10,000 , limited to construction costs, to bring a roof up to the FORTIFIED Roof standard. The completed roof must earn the designation for the grant to be paid.

Selection: homeowners enter a lottery during announced registration windows, and eligible parishes vary by round .

Eligibility: existing owner-occupied primary residence with a homestead exemption ; an active policy with wind coverage ; flood insurance if in a FEMA Special Flood Hazard Area; home in good repair per the evaluator. New construction, condominiums, and mobile homes are not eligible. Partial repairs don't qualify; the entire contiguous roof covering is replaced.

Sequence: homeowners who start work before LFHP approval are not eligible . Wait for the grant award before selecting a contractor.

Payment: grant funds are paid directly to contractors . Homeowners pay evaluation fees and any costs beyond the grant, and must disclose roof-related insurance claims from the past five years.

Contractor rules: LFHP contractors must hold an LSLBC Residential Roofing or Residential Construction license under Act 422, hold IBHS FORTIFIED certification, carry commercial general liability of at least $1,000,000 for roofing work, obtain the building permits, and not act as public adjusters .

Louisiana FORTIFIED Roof Tax Credit

Act 404 of 2025 created a nonrefundable state income tax credit of 100 percent of qualified expenses, up to $10,000 per residence . It covers upgrading an owner-occupied primary residence roof to FORTIFIED Roof. The Louisiana Department of Revenue allocates credits first come, first served under an annual program cap. The credit cannot be combined with an LFHP grant on the same roof. Applications go through the department's online portal on the schedule it announces.

Insurance Discounts: LDI Regulation 136

In 2026, LDI issued Bulletin 2026-04 announcing Regulation 136 . The regulation requires insurers to apply set hurricane-premium discounts to residential properties with FORTIFIED designations no later than January 1, 2027 :

  • Zone FORTIFIED Roof Silver Gold
  • North 16% 20% 24%
  • Central 27% 35% 42%
  • South 29% 43% 49%

The discounts apply to the hurricane portion of the premium, not the whole bill. Before 2027, discounts varied by insurer; LDI publishes an annual report of company discounts.

Loading diagram... FORTIFIED Roof Job Flow in Louisiana