Study guide

1.3 LSLBC Enforcement: Violations, Cease-and-Desist Orders, Civil Fines & Criminal Penalties

Louisiana Residential Roofing Contractor Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Louisiana Licensing Law & Act 422 Regulatory Framework

1.1 Act 422 (2025): The Residential Roofing Classification, the $7,500 Threshold & Licensing Requirements 1.2 Act 239 (2025) Roof Permits & Inspections, Permit-Related Violations & Louisiana's Construction Code 1.3 LSLBC Enforcement: Violations, Cease-and-Desist Orders, Civil Fines & Criminal Penalties

2 Chapter 2: Louisiana Business Law, Contracts & Liens

2.1 Louisiana Private Works Act (La. R.S. 9:4801 et seq.): Privileges, Notices of Contract & Termination, and Lien Deadlines 2.2 Residential Roofing Contracts: Required Contents (R.S. 37:2159) & Property-Insurance Claim Rules (R.S. 37:2159.1) 2.3 Contractor Insurance (Liability & Workers' Compensation), the Statutory Employer Rule & Business Records

3 Chapter 3: Roofing Estimating, Plan Reading & Mathematics

3.1 Architectural Roof Plans, Symbols, Dimensions & Structural Pitch Calculations 3.2 Surface Area Calculations, Roofing Squares, Pitch Multipliers & Slope Formulas 3.3 Material Takeoff, Wastage Factors (Hips, Valleys, Rakes), and Jobsite Cost Estimating

4 Chapter 4: Roof Deck Preparation, Substrates & Re-Roofing Codes

4.1 Roof Deck Substrates (Plywood, OSB, Wood Board) & Structural Inspection Criteria 4.2 Reroofing Rules (IBC 1512 / IRC R908): Roof Replacement vs. Roof Recover, the Two-Layer Limit & Tear-Off Triggers 4.3 Deck Fastening, Nail Patterns, Damaged Sheathing Replacement & Clean Substrate Preparation

5 Chapter 5: Hurricane-Resistant Roofing, Wind Codes & FORTIFIED Standards

5.1 Louisiana Wind Speeds, Exposure, Wind-Borne Debris Regions & Roof Uplift Zones (IBC Chapter 16 / ASCE 7) 5.2 High-Wind Underlayment Rules (IBC Table 1507.1.1) & Sealed Roof Deck Options (Taped Seams, Two Layers, Full Self-Adhered) 5.3 IBHS FORTIFIED Roof (2025 Standard), the Louisiana Fortify Homes Program & Louisiana FORTIFIED Incentives 5.4 High-Wind Fastening Protocols: 6-Nail Shingle Patterns, Ring-Shank Nails & ASTM D3161/D7158 Wind Ratings

6 Chapter 6: Asphalt Shingles & Steep-Slope Assemblies

6.1 Asphalt Shingle Types (3-Tab vs. Laminated Architectural), ASTM Classifications & Thermal Behavior 6.2 Underlayment Specifications: Felt vs. Synthetic Underlayments & Self-Adhering High-Temperature Membranes 6.3 Shingle Application Mechanics: Starter Courses, Offsets, Fastener Placement & Wind Sealant Activation 6.4 Valley Construction Assemblies (Open Metal, Woven, Closed-Cut) & Ridge / Hip Cap Installations

7 Chapter 7: Metal, Tile, Slate & Wood Steep-Slope Systems

7.1 Metal Roof Panels & Metal Roof Shingles: Standing Seam, Exposed Fasteners, Minimum Slopes & Thermal Movement 7.2 Concrete & Clay Tile Roof Systems: Battens, Direct-to-Deck, Wind Uplift Resistance & Foam/Mortar Adhesion 7.3 Natural Slate & Synthetic Tile Roofing: Installation Fundamentals, Headlap & Fastening 7.4 Wood Shingles & Wood Shakes (IBC 1507.8–1507.9): Grades, Slopes, Sheathing, Exposure, Spacing & Fasteners

8 Chapter 8: Low-Slope Membranes & Built-Up Roofing (BUR)

8.1 Built-Up Roofing (BUR) Systems: Asphalt vs. Coal Tar Pitch, Organic/Glass Felts & Surfacings 8.2 Polymer-Modified Bitumen Systems: SBS vs. APP, Torched, Hot-Mopped, Cold-Adhesive & Self-Adhered Sheets 8.3 Single-Ply Roofing Membranes: TPO, PVC, and EPDM (Attachment Methods, Seam Welding & Ballast) 8.4 Low-Slope Rigid Insulation, Cover Boards, Vapor Retarders & Thermal Barriers

9 Chapter 9: Flashing, Penetrations & Roof Ventilation

9.1 Edge Metal & Drip Edge: Code Rules (IBC 1507.2.8.3 / IRC R905.2.8.5), FORTIFIED Upgrades & ES-1 Edge Securement 9.2 Step Flashing, Counterflashing, Chimney Crickets & Reglet Details 9.3 Plumbing Vents, Mechanical Exhausts, Skylight Curbs & Roof Penetration Seals 9.4 Attic Ventilation: Net Free Ventilating Area (1/150 vs. 1/300 Rule, IBC 1202.2 / IRC R806), Balanced Airflow & Unvented Attics

10 Chapter 10: Roof Drainage, Maintenance & Emergency Repairs

10.1 Roof Drainage Design: Primary Drains, Secondary Overflow Scuppers & Sizing Calculations 10.2 Gutters, Downspouts, Splash Blocks & Stormwater Runoff Management 10.3 Post-Storm Emergency Tarping, Temporary Shoring, Moisture Assessment & Insurance Scope Documentation

11 Chapter 11: OSHA Safety, Fall Protection & Jobsite Environmental Controls

11.1 OSHA 29 CFR 1926 Subpart M: Fall Protection Systems (Guardrails, Safety Nets, PFAS, Warning Lines & Monitors) 11.2 Ladder & Scaffolding Safety (29 CFR 1926 Subpart L & X, 4:1 Extension Rule, Tie-Off & Pitch) 11.3 PPE, Tool Safety, Hot Kettle/Torch Safety & Hazardous Material Communication (Lead, Asbestos, Silica) 11.4 Heat Illness Prevention & Louisiana High-Humidity Environmental Field Controls

1.3 LSLBC Enforcement: Violations, Cease-and-Desist Orders, Civil Fines & Criminal Penalties

Key Takeaways Explain This Topic AI

R.S. 37:2158(A) lists the grounds for discipline, including working without the proper classification, lending a license, and permit, inspection, and contract failures.

The board may fine up to 10 percent of the total contract or the value of the work bid or performed, plus administrative costs and attorney fees (R.S. 37:2164(A)).

Contracting without a license is a misdemeanor punishable by up to $500 per day of violation, three months in prison, or both (R.S. 37:2163(C)(1)).

An unlicensed contractor who causes more than $300 in harm faces $500 to $5,000 in fines and up to five years' imprisonment, with or without hard labor (R.S. 37:2163(C)(2)).

A contractor who needed a license but lacked one cannot file a statement of claim or privilege (lien) for amounts owed (R.S. 37:2159(D)).

Last updated: September 2026

Who Enforces and How

The Louisiana State Licensing Board for Contractors is based in Baton Rouge. Its Residential Subcommittee hears alleged violations by residential contractors, including Residential Roofing licensees, home improvement registrants, and mold remediation contractors. The board's compliance staff investigate complaints from homeowners, competitors, building officials, and insurers. Staff may also review local permit lists , and permit offices must hand over permit and inspection records on request (R.S. 37:2160(A)).

Grounds for Discipline: R.S. 37:2158(A)

The board and Residential Subcommittee may revoke, suspend, or refuse to renew a license, issue cease-and-desist orders, issue fines, or debar for any listed violation. The ones roofers trip over most:

  • Paragraph Violation
  • (1) Bidding or performing work without a required license or without the proper classification

(2) Publishing or circulating a misleading or false claim about license status or classification , including on digital platforms

  • (7) Contracting with an unlicensed contractor for work that requires a license
  • (8) Letting someone else use your license , or misusing another's license
  • (9) Failing to maintain a qualifying party

(13) Not notifying the board within 30 days of changes to application information or of actions against the licensee in other jurisdictions

(15) Failing to give the customer, on request , your name, license number, classification, and current insurance certificates (residential work)

  • (16) Abandoning a project without justification, or deviating materially from plans without consent
  • (17) Efforts to deceive or defraud the public
  • (18) No permit, starting before the permit issues, or misrepresenting value or scope
  • (19) Failure to obtain required inspections
  • (20) No written contract signed and dated by all parties
  • (22) Not producing records the board requests within five business days

Act 757 of 2026 (effective August 1, 2026) adds more grounds. They include intentional property damage to induce a contract, failing to pay for materials or services after receiving sufficient funds, and material misrepresentations in permit applications.

Anti-splitting rule. R.S. 37:2158(B) treats a contract divided to avoid licensing as one contract. The board may look at drawings, plans, and other renderings to decide whether several contracts are one scope of work.

Civil Penalties: R.S. 37:2164

Fine of up to 10 percent of the total contract, or of the value of the work bid or performed, after notice and a hearing.

The board may add administrative costs and attorney fees for each offense.

In setting the fine, the board considers the seriousness of the violation, the contractor's cooperation, and prior violations. Act 757 of 2026 adds the staff's investigative effort. Where no value can be determined, Act 757 allows a fine of up to $10,000 per violation .

Penalties are payable within 90 days . Unpaid penalties can block issuance or renewal, lead to collection, and, under Act 757, lead to suspension.

Board staff may issue citations that let the person plead no contest and pay the fine, or request a hearing (R.S. 37:2164(K)).

Fines go to the contractors' educational trust fund .

Cease-and-Desist Orders and Injunctions

The board may issue a cease-and-desist order to stop any activity that violates the chapter (R.S. 37:2164(C)). If the person does not stop immediately, the board can go to court:

The court shall issue a temporary restraining order on a proper showing, followed by a preliminary and then a permanent injunction. The board does not have to post bond (R.S. 37:2164(E)).

The injunction trial is summary and by the judge without a jury (R.S. 37:2164(G)).

Anyone who keeps working after proper notice to cease is ineligible to apply for a license for up to one year (R.S. 37:2164(H)).

Criminal Penalties: R.S. 37:2163

Engaging in the business of contracting without an active license is unlawful. So is circulating a misleading or false claim about license status or classification (R.S. 37:2163(A)).

Situation Penalty on conviction

Contracting without authority Misdemeanor : fine up to $500 per day of violation, three months in prison, or both

Unlicensed person who causes harm or damage over $300 Fine of $500 to $5,000 , imprisonment with or without hard labor for six months to five years , or both

The district attorney in the parish where the violation occurs has sole authority to prosecute (R.S. 37:2163(D)).

Consequences That Hit the Wallet

No lien rights. A contractor who needed a license but did not have one cannot file a statement of claim or privilege for money owed under the contract (R.S. 37:2159(D)). Chapter 2 covers liens.

Revocation lockout. After a license or qualifying-party status is revoked, the person cannot apply again for three years (R.S. 37:2158(C)).

Deceptive exam conduct makes a person ineligible to serve as a qualifying party for three years (R.S. 37:2156.1(D)).

Appeals

A party aggrieved by a board decision may appeal under the Administrative Procedure Act. Appeals of license denial, revocation, or suspension go to the 19th Judicial District Court in East Baton Rouge Parish (R.S. 37:2158(E)–(F)). Act 757 of 2026 sets a 30-day window to petition that court for review of a final board decision and adds procedures for requesting a stay.

Advertising and License Claims

Two rules shape roofing marketing:

No false or misleading license claims. Saying "licensed" when you hold only an occupational license, or advertising a classification you do not hold, violates R.S. 37:2158(A)(2) and R.S. 37:2163(A)(2).

Bid in your licensed name. You must bid, contract, and perform in the name that appears on the license (R.S. 37:2158(A)(21)). For residential work, give the customer your name, license number, classification, and insurance certificates when asked (R.S. 37:2158(A)(15)).

Insurance-claim marketing rules, such as the ban on advertising as an "insurance claims specialist," are covered in Section 2.2.

Loading diagram... LSLBC Enforcement Paths for an Unlicensed Residential Roofing Job