Study guide

2.3 Contractor Insurance (Liability & Workers' Compensation), the Statutory Employer Rule & Business Records

Louisiana Residential Roofing Contractor Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Louisiana Licensing Law & Act 422 Regulatory Framework

1.1 Act 422 (2025): The Residential Roofing Classification, the $7,500 Threshold & Licensing Requirements 1.2 Act 239 (2025) Roof Permits & Inspections, Permit-Related Violations & Louisiana's Construction Code 1.3 LSLBC Enforcement: Violations, Cease-and-Desist Orders, Civil Fines & Criminal Penalties

2 Chapter 2: Louisiana Business Law, Contracts & Liens

2.1 Louisiana Private Works Act (La. R.S. 9:4801 et seq.): Privileges, Notices of Contract & Termination, and Lien Deadlines 2.2 Residential Roofing Contracts: Required Contents (R.S. 37:2159) & Property-Insurance Claim Rules (R.S. 37:2159.1) 2.3 Contractor Insurance (Liability & Workers' Compensation), the Statutory Employer Rule & Business Records

3 Chapter 3: Roofing Estimating, Plan Reading & Mathematics

3.1 Architectural Roof Plans, Symbols, Dimensions & Structural Pitch Calculations 3.2 Surface Area Calculations, Roofing Squares, Pitch Multipliers & Slope Formulas 3.3 Material Takeoff, Wastage Factors (Hips, Valleys, Rakes), and Jobsite Cost Estimating

4 Chapter 4: Roof Deck Preparation, Substrates & Re-Roofing Codes

4.1 Roof Deck Substrates (Plywood, OSB, Wood Board) & Structural Inspection Criteria 4.2 Reroofing Rules (IBC 1512 / IRC R908): Roof Replacement vs. Roof Recover, the Two-Layer Limit & Tear-Off Triggers 4.3 Deck Fastening, Nail Patterns, Damaged Sheathing Replacement & Clean Substrate Preparation

5 Chapter 5: Hurricane-Resistant Roofing, Wind Codes & FORTIFIED Standards

5.1 Louisiana Wind Speeds, Exposure, Wind-Borne Debris Regions & Roof Uplift Zones (IBC Chapter 16 / ASCE 7) 5.2 High-Wind Underlayment Rules (IBC Table 1507.1.1) & Sealed Roof Deck Options (Taped Seams, Two Layers, Full Self-Adhered) 5.3 IBHS FORTIFIED Roof (2025 Standard), the Louisiana Fortify Homes Program & Louisiana FORTIFIED Incentives 5.4 High-Wind Fastening Protocols: 6-Nail Shingle Patterns, Ring-Shank Nails & ASTM D3161/D7158 Wind Ratings

6 Chapter 6: Asphalt Shingles & Steep-Slope Assemblies

6.1 Asphalt Shingle Types (3-Tab vs. Laminated Architectural), ASTM Classifications & Thermal Behavior 6.2 Underlayment Specifications: Felt vs. Synthetic Underlayments & Self-Adhering High-Temperature Membranes 6.3 Shingle Application Mechanics: Starter Courses, Offsets, Fastener Placement & Wind Sealant Activation 6.4 Valley Construction Assemblies (Open Metal, Woven, Closed-Cut) & Ridge / Hip Cap Installations

7 Chapter 7: Metal, Tile, Slate & Wood Steep-Slope Systems

7.1 Metal Roof Panels & Metal Roof Shingles: Standing Seam, Exposed Fasteners, Minimum Slopes & Thermal Movement 7.2 Concrete & Clay Tile Roof Systems: Battens, Direct-to-Deck, Wind Uplift Resistance & Foam/Mortar Adhesion 7.3 Natural Slate & Synthetic Tile Roofing: Installation Fundamentals, Headlap & Fastening 7.4 Wood Shingles & Wood Shakes (IBC 1507.8–1507.9): Grades, Slopes, Sheathing, Exposure, Spacing & Fasteners

8 Chapter 8: Low-Slope Membranes & Built-Up Roofing (BUR)

8.1 Built-Up Roofing (BUR) Systems: Asphalt vs. Coal Tar Pitch, Organic/Glass Felts & Surfacings 8.2 Polymer-Modified Bitumen Systems: SBS vs. APP, Torched, Hot-Mopped, Cold-Adhesive & Self-Adhered Sheets 8.3 Single-Ply Roofing Membranes: TPO, PVC, and EPDM (Attachment Methods, Seam Welding & Ballast) 8.4 Low-Slope Rigid Insulation, Cover Boards, Vapor Retarders & Thermal Barriers

9 Chapter 9: Flashing, Penetrations & Roof Ventilation

9.1 Edge Metal & Drip Edge: Code Rules (IBC 1507.2.8.3 / IRC R905.2.8.5), FORTIFIED Upgrades & ES-1 Edge Securement 9.2 Step Flashing, Counterflashing, Chimney Crickets & Reglet Details 9.3 Plumbing Vents, Mechanical Exhausts, Skylight Curbs & Roof Penetration Seals 9.4 Attic Ventilation: Net Free Ventilating Area (1/150 vs. 1/300 Rule, IBC 1202.2 / IRC R806), Balanced Airflow & Unvented Attics

10 Chapter 10: Roof Drainage, Maintenance & Emergency Repairs

10.1 Roof Drainage Design: Primary Drains, Secondary Overflow Scuppers & Sizing Calculations 10.2 Gutters, Downspouts, Splash Blocks & Stormwater Runoff Management 10.3 Post-Storm Emergency Tarping, Temporary Shoring, Moisture Assessment & Insurance Scope Documentation

11 Chapter 11: OSHA Safety, Fall Protection & Jobsite Environmental Controls

11.1 OSHA 29 CFR 1926 Subpart M: Fall Protection Systems (Guardrails, Safety Nets, PFAS, Warning Lines & Monitors) 11.2 Ladder & Scaffolding Safety (29 CFR 1926 Subpart L & X, 4:1 Extension Rule, Tie-Off & Pitch) 11.3 PPE, Tool Safety, Hot Kettle/Torch Safety & Hazardous Material Communication (Lead, Asbestos, Silica) 11.4 Heat Illness Prevention & Louisiana High-Humidity Environmental Field Controls

2.3 Contractor Insurance (Liability & Workers' Compensation), the Statutory Employer Rule & Business Records

Key Takeaways Explain This Topic AI

Residential construction and subclassification applicants must show workers' compensation coverage and liability insurance or approved trust-fund protection (R.S. 37:2156.1(E)).

Act 757 of 2026 raised the minimum liability coverage for residential classifications from $100,000 to $500,000, effective August 1, 2026.

Proof of coverage must come from the agent, broker, or insurer, cover at least six months and all licensed scopes without exclusions, and list the LSLBC as certificate holder.

Under La. R.S. 23:1061, a principal contractor can be the statutory employer of a subcontractor's workers; it pays their compensation benefits and may seek indemnity.

OSHA injury and illness logs (Forms 300, 300A, and 301) must be kept for five years after the end of the year they cover (29 CFR 1904.33).

Last updated: September 2026

Why Insurance Is a Licensing Issue

For residential classifications, insurance is a condition of the license . R.S. 37:2156.1(E) requires applicants for residential construction and its subclassifications, which include Residential Roofing, to submit:

certificates of workers' compensation coverage that complies with Title 23; and

liability insurance , or liability protection from an authorized liability trust fund.

Letting coverage lapse means you no longer meet a licensure requirement, which is a violation under R.S. 37:2158(A)(10). R.S. 37:2159 also requires the insurance certificates to be part of the customer contract.

The 2026 Changes: Act 757

The LSLBC's July 13, 2026 memo summarizes Act 757 of the 2026 Regular Session. Effective August 1, 2026 , applicants and licensees in residential construction and its subclassifications and specialties, mold remediation, and home improvement must meet these rules:

Requirement Detail

Minimum liability coverage $500,000 , up from $100,000, or qualifying protection through an authorized liability trust fund

Who submits proof The agent, broker, or insurer , not the contractor

Content of the proof Identifies the licensee, insurer, broker and broker's address, policy number, and coverage dates

  • Term and scope Covers at least six months and all licensed scopes , with no exclusions for those scopes
  • Certificate holder LSLBC

Continuity Required workers' compensation and liability protection must stay continuously in effect while the license is active

Why "no exclusions for licensed scopes" matters. Some cheap contractor policies exclude roofing, work above a certain height, or open-flame work. A Residential Roofing licensee's policy must cover the roofing scope it is licensed for.

Program requirements can be higher. Contractors on Louisiana Fortify Homes Program grant jobs must carry commercial general liability of at least $1,000,000 for roofing work under the program's contractor rules (Chapter 5).

Commercial General Liability (CGL) Basics

CGL covers third-party bodily injury and property damage from your operations and completed work. Typical roofing examples are rain entering an open roof and damaging a living room, or a dropped bundle denting a car. When you buy or renew:

Read the exclusions : height limits, "open-roof" or rain limits, hot-work or torch exclusions, and exclusions for subcontracted work.

Confirm completed-operations coverage, because roof leaks often appear months later.

Keep certificates of insurance current for the LSLBC, permit offices, and customers.

Workers' Compensation in Louisiana

The Louisiana Workers' Compensation Act (La. R.S. 23:1021 et seq.) is administered by the Louisiana Workforce Commission . It gives injured employees no-fault medical and wage benefits, and it gives employers immunity from most tort suits by their employees. The Act generally applies to any employer with one or more employees ; there is no small-employer exemption. Coverage is bought from an insurer or through approved self-insurance.

Classification. Louisiana uses the National Council on Compensation Insurance (NCCI) classification system. Roofing payroll is rated under Code 5551, Roofing—All Kinds & Drivers , one of the higher-rated construction codes. Classifying roofers under a cheaper code, such as carpentry or drywall, invites premium audits and fraud exposure.

The Statutory Employer Rule: La. R.S. 23:1061

When a principal contracts out work that is part of its trade, business, or occupation, the principal becomes the statutory employer of the contractor's employees. The rule applies in three ways:

(A)(1) basic rule. The statutory employer is liable to pay workers' compensation benefits to those employees as if it employed them directly. In exchange, it receives the exclusive-remedy (tort) immunity of R.S. 23:1032.

(A)(2) two-contract situation. A statutory employer relationship exists whenever the subcontractor's work is part of a contract between the principal and someone else. The classic example is a general contractor that agreed with the owner to reroof and then subcontracts the shingle work.

(A)(3) written-contract presumption. Otherwise, the relationship requires a written contract recognizing the principal as statutory employer. That creates a rebuttable presumption.

The principal who pays benefits is entitled to indemnity from the contractor (R.S. 23:1061(B)).

What this means for a roofing contractor who subcontracts:

Require a current certificate of insurance sent directly by the subcontractor's agent , and check that it stays in force through the job.

Expect your own carrier's year-end premium audit to charge premium on payments to uninsured subcontractors as if they were your payroll.

Remember the LSLBC rules. Subcontractors to a Residential Construction license holder may be exempt from licensure (R.S. 37:2157(A)(17)). Contracting with an unlicensed contractor for work that requires a license is still a violation (R.S. 37:2158(A)(7)).

Job Costing and Cash Flow

A roofing job should be tracked as its own cost center:

Direct materials : shingles, underlayment, flashing metal, nails, ventilation, and decking allowances, plus waste (Chapter 3).

Direct labor : wages plus labor burden , meaning payroll taxes, unemployment insurance, and Code 5551 workers' compensation premium.

Job overhead : permit fees, dumpsters and landfill fees, equipment rental, and safety equipment.

General overhead and profit : office, vehicles, advertising, estimating software, and margin.

Commercial jobs may hold retainage until closeout. Plan working capital so a slow-paying job does not stop you from paying suppliers. Unpaid suppliers can file Private Works Act claims (Section 2.1).

Record Retention

Keep records at least as long as the government can audit or a claim can arise:

Record Minimum guide Source

Louisiana state tax records (income, franchise, sales and use) At least 3 years from December 31 of the year the tax became due, the Louisiana prescription period for assessment La. R.S. 47:1580

Federal income tax records Generally 3 years after filing; longer in some situations, such as 6 years for substantial underreporting IRS guidance

  • Federal employment tax records At least 4 years IRS guidance
  • OSHA Forms 300, 300A, and 301 5 years after the end of the calendar year covered 29 CFR 1904.33
  • LSLBC requests Produce requested records within five business days R.S. 37:2158(A)(22)

Also keep signed contracts, change orders, permits, inspection results, photos, delivery tickets, and warranty registrations for at least the length of your workmanship warranty. They are your evidence in lien suits, warranty claims, and board complaints.

Loading diagram... Subcontractor Insurance Check Before a Crew Starts