Study guide

5.4 Substituting into Formulae, Linear Equations, and Number Patterns

LANTITE Numeracy Component Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Introduction, Test Structure & ACER Assessment Framework

1.1 LANTITE Numeracy Test Structure, Timing, and Administration 1.2 The ACER Assessment Framework: Contexts, Processes, and Performance Bands 1.3 Calculator-Available vs. Non-Calculator Strategy and Item Formats

2 Chapter 2: Number & Algebra I — Whole Numbers, Place Value, Integers, and Index Laws

2.1 Place Value, Rounding, Significant Figures, and Magnitude 2.2 Multi-Step Whole-Number Operations, Remainders, and Resource Allocation 2.3 Directed Numbers (Integers), Order of Operations, and Inverse Operations 2.4 Powers, Square Roots, Powers of Ten, and Scientific Notation

3 Chapter 3: Number & Algebra II — Fractions, Decimals, and Percentages

3.1 Fractions: Equivalence, Simplification, Comparison, and Operations 3.2 Decimals: Operations, Terminating and Recurring Decimals, and Equivalence 3.3 Percentages: Finding Percentages and Expressing Quantities as Percentages 3.4 Percentage Change, Discounts, Successive Changes, and Reverse Percentages

4 Chapter 4: Number & Algebra III — Ratios, Rates, Proportion, and Weighted Averages

4.1 Ratios, Simplification, Part-to-Part vs. Part-to-Whole, and Proportional Sharing 4.2 Rates, Unit Pricing, Fuel Consumption, and Speed–Distance–Time 4.3 Direct and Inverse Proportion, Currency Exchange, and Scaling 4.4 Weighted Averages, Assessment Gradebooks, and Combined Group Means

5 Chapter 5: Number & Algebra IV — Financial Numeracy, GST, Budgeting, and Algebraic Reasoning

5.1 Australian GST (10%), Pre-GST and Post-GST Prices, and Tiered Tax Tables 5.2 Personal and School Budgeting, Pay Rates, Utilities, and Break-Even Analysis 5.3 Simple Interest, Compound Growth, Depreciation, and Repayment Comparisons 5.4 Substituting into Formulae, Linear Equations, and Number Patterns

6 Chapter 6: Measurement & Geometry I — Metric Units, Perimeter, Area, Volume, and Time

6.1 Metric Units, Prefixes, Scale Reading, and Squared/Cubed Unit Conversions 6.2 Perimeter and Area of Rectangles, Triangles, Circles, and Composite 2D Shapes 6.3 Volume, Surface Area, Capacity, and Packing Problems 6.4 Elapsed Time, 12/24-Hour Timetables, School Bell Schedules, and Australian Time Zones

7 Chapter 7: Measurement & Geometry II — Spatial Reasoning, Angles, Scale Plans, and Navigation

7.1 Angle Properties, Polygons, Similar Figures, Symmetry, and Transformations 7.2 3D Solids, Nets, Faces/Edges/Vertices, and Orthographic Projections 7.3 Scale Drawings, Classroom Floor Plans, Map Ratios, and Area Scaling 7.4 Grid References, Coordinates, GPS Data, Compass Directions, and Bearings

8 Chapter 8: Statistics & Probability I — Reading and Interpreting Tables, Graphs, and Data Displays

8.1 Two-Way Contingency Tables, Relative Frequencies, and Venn Diagrams 8.2 Clustered and Stacked Bar Charts, Pie Charts, and Dual-Axis Line Graphs 8.3 Histograms, Cumulative Frequency, Stem-and-Leaf Plots, and Dot Plots 8.4 Scatterplots, Trend Lines, Bubble Charts, and Correlation vs. Causation

9 Chapter 9: Statistics & Probability II — Measures of Centre, Spread, Box Plots, and NAPLAN Data

9.1 Mean, Median, Mode, Frequency Table Averages, and the Effect of Outliers 9.2 Range, Quartiles, Interquartile Range (IQR), and Comparing Parallel Box Plots 9.3 Interpreting NAPLAN Displays, Proficiency Levels, Percentiles, and Standardised Scores

10 Chapter 10: Statistics & Probability III — Probability, Conditional Chance, and Evaluating Statistical Claims

10.1 Theoretical vs. Experimental Probability, Complementary Events, and Expected Frequency 10.2 Multi-Stage Events, Tree Diagrams, Replacement vs. Non-Replacement, and Conditional Probability 10.3 Sampling Bias, Misleading Graphs, Base-Rate Fallacies, and Evaluating Media/Research Claims

11 Chapter 11: Section 2 Mastery — Non-Calculator Mental Strategies, Estimation, and Verification

11.1 Mental Addition, Subtraction, Multiplication, and Division Strategies 11.2 Non-Calculator Benchmark Percentages, Fractional Shortcuts, and Decimal Scaling 11.3 Leading-Digit Estimation, Upper/Lower Bounds, Units Analysis, and Final Verification

5.4 Substituting into Formulae, Linear Equations, and Number Patterns

Key Takeaways Explain This Topic AI

When substituting negative or decimal values into algebraic formulae, follow strict order of operations (evaluative brackets and exponents before multiplication/division, then addition/subtraction).

Two-sided linear equations of the form ax + b = cx + d model situations where two quotes with different fixed fees and per-unit rates cost the exact same total amount.

When solving linear budget inequalities (such as Fixed Cost + Rate x n <= Budget), any fractional maximum capacity must be rounded down to avoid exceeding the budget limit.

In a linear number pattern with constant first difference m, the rule for the nth term is T_n = mn + c, where c = T_1 - m is the zero term (not the first term T_1).

Last updated: October 2026

Substituting into Real-World Word and Symbolic Formulae

LANTITE frequently presents a practical rule—either in words or in algebraic symbols—and asks you to evaluate the output for given inputs, or work backward from a known output to find an unknown input. Accurate substitution relies on two habits: wrapping substituted values (especially negative numbers and decimals) in brackets and applying the order of operations (BODMAS/BIMDAS) .

Common formula structures include:

Linear cost models ( C = F + r n C = F + rn C = F + r n ): For a school excursion with fixed bus hire of $450 and student entry of $18.50 per student, the total cost for n n n students is C = 450 + 18.5 n C = 450 + 18.5n C = 450 + 18.5 n . For n = 36 students n = 36\text{ students} n = 36 students , multiply before adding: C = 450 + ( 18.5 × 36 ) = 450 + 666 = 1,116 C = 450 + (18.5 \times 36) = 450 + 666 = 1{,}116 C = 450 + ( 18.5 × 36 ) = 450 + 666 = 1 , 116 ($1,116).

Temperature conversions ( F = 1.8 C + 32 F = 1.8C + 32 F = 1.8 C + 32 and C = 5 ( F − 32 ) 9 C = \frac{5(F - 32)}{9} C = 9 5 ( F − 32 ) ​ ): When substituting a sub-zero Celsius temperature such as C = − 5 ∘ C C = -5^\circ\text{C} C = − 5 ∘ C , preserve the negative sign: F = 1.8 ( − 5 ) + 32 = − 9 + 32 = 23 ∘ F F = 1.8(-5) + 32 = -9 + 32 = 23^\circ\text{F} F = 1.8 ( − 5 ) + 32 = − 9 + 32 = 2 3 ∘ F . Conversely, if F = 68 ∘ F F = 68^\circ\text{F} F = 6 8 ∘ F , subtract 32 32 32 inside the brackets first: C = 5 ( 68 − 32 ) 9 = 5 × 36 9 = 20 ∘ C C = \frac{5(68 - 32)}{9} = \frac{5 \times 36}{9} = 20^\circ\text{C} C = 9 5 ( 68 − 32 ) ​ = 9 5 × 36 ​ = 2 0 ∘ C .

Multi-variable and squared formulas (BMI, medication dosages, and stopping distance):

Body Mass Index: BMI = m h 2 \text{BMI} = \frac{m}{h^2} BMI = h 2 m ​ , where m m m is mass in kg \text{kg} kg and h h h is height in metres (convert 160 cm 160\text{ cm} 160 cm to 1.6 m 1.6\text{ m} 1.6 m first, then square 1.6 2 = 2.56 1.6^2 = 2.56 1. 6 2 = 2.56 before dividing: for m = 64 kg m = 64\text{ kg} m = 64 kg , BMI = 64 2.56 = 25 \text{BMI} = \frac{64}{2.56} = 25 BMI = 2.56 64 ​ = 25 ).

Pediatric dosage (Young's Rule): D = A × Y Y + 12 D = \frac{A \times Y}{Y + 12} D = Y + 12 A × Y ​ , where A A A is the adult dose in mg \text{mg} mg and Y Y Y is the child's age in years. Always evaluate the entire denominator ( Y + 12 ) (Y + 12) ( Y + 12 ) before dividing: for an 8 -year-old 8\text{-year-old} 8 -year-old child when the adult dose is A = 250 mg A = 250\text{ mg} A = 250 mg , D = 250 × 8 8 + 12 = 2,000 20 = 100 mg D = \frac{250 \times 8}{8 + 12} = \frac{2{,}000}{20} = 100\text{ mg} D = 8 + 12 250 × 8 ​ = 20 2 , 000 ​ = 100 mg .

Vehicle stopping distance: d = 0.25 v + 0.008 v 2 d = 0.25v + 0.008v^2 d = 0.25 v + 0.008 v 2 . For v = 50 km/h v = 50\text{ km/h} v = 50 km/h , square v v v before multiplying by 0.008 0.008 0.008 : d = 0.25 ( 50 ) + 0.008 ( 2,500 ) = 12.5 + 20 = 32.5 m d = 0.25(50) + 0.008(2{,}500) = 12.5 + 20 = 32.5\text{ m} d = 0.25 ( 50 ) + 0.008 ( 2 , 500 ) = 12.5 + 20 = 32.5 m .

Forming and Solving Linear Equations ( a x + b = c ax + b = c a x + b = c and a x + b = c x + d ax + b = cx + d a x + b = c x + d )

To find an unknown input when the output or comparison condition is known, translate the word problem into a linear equation and isolate the pronumeral n n n using inverse operations:

One-target equations ( a x + b = c ax + b = c a x + b = c ): Subtract the fixed term b b b from both sides first, then divide by the per-unit rate a a a : x = c − b a x = \frac{c - b}{a} x = a c − b ​ .

Equating two competing quotes ( a x + b = c x + d ax + b = cx + d a x + b = c x + d ): Collect the variable terms on one side and the fixed constants on the other: ( a − c ) x = d − b (a - c)x = d - b ( a − c ) x = d − b .

Worked Example 1: Comparing Two School Formal Venue Quotes

A Year 12 coordinator compares two venues for the graduation dinner:

Venue A: $600 fixed room hire plus $12 per student ( C A = 600 + 12 n C_A = 600 + 12n C A ​ = 600 + 12 n ).

Venue B: $240 fixed room hire plus $20 per student ( C B = 240 + 20 n C_B = 240 + 20n C B ​ = 240 + 20 n ).

For what number of students n n n do both venues charge the exact same total price, and which venue is cheaper for 60 students 60\text{ students} 60 students ?

Set the two cost expressions equal: 600 + 12 n = 240 + 20 n 600 + 12n = 240 + 20n 600 + 12 n = 240 + 20 n

Subtract 12 n 12n 12 n and 240 240 240 from both sides: 600 − 240 = 20 n − 12 n ⟹ 360 = 8 n 600 - 240 = 20n - 12n \implies 360 = 8n 600 − 240 = 20 n − 12 n ⟹ 360 = 8 n

Divide by 8 8 8 : n = 360 8 = 45 students n = \frac{360}{8} = 45\text{ students} n = 8 360 ​ = 45 students

At n = 45 n = 45 n = 45 , both venues cost 600 + 12 ( 45 ) = 1,140 600 + 12(45) = 1{,}140 600 + 12 ( 45 ) = 1 , 140 ($1,140). Notice how each extra student costs $8 less at Venue A ($12 vs. $20), which takes 360 ÷ 8 = 45 students 360 \div 8 = 45\text{ students} 360 ÷ 8 = 45 students to offset Venue A's $360 higher fixed fee.

4. Compare for 60 students 60\text{ students} 60 students : Because 60 > 45 60 > 45 60 > 45 , Venue A is cheaper ( 600 + 12 ( 60 ) = 1,320 600 + 12(60) = 1{,}320 600 + 12 ( 60 ) = 1 , 320 , or $1,320, vs. Venue B at 240 + 20 ( 60 ) = 1,440 240 + 20(60) = 1{,}440 240 + 20 ( 60 ) = 1 , 440 , or $1,440).

Linear Inequalities and Context-Driven Rounding

When a school budget has an upper ceiling K K K , the linear model forms an inequality: F + r n ≤ K ⟹ n ≤ K − F r F + rn \le K \implies n \le \frac{K - F}{r} F + r n ≤ K ⟹ n ≤ r K − F ​

Suppose an excursion costs C = 450 + 18.5 n C = 450 + 18.5n C = 450 + 18.5 n and the total budget cannot exceed $2,000: 450 + 18.5 n ≤ 2,000 ⟹ 18.5 n ≤ 1,550 ⟹ n ≤ 1,550 18.5 ≈ 83.78 450 + 18.5n \le 2{,}000 \implies 18.5n \le 1{,}550 \implies n \le \frac{1{,}550}{18.5} \approx 83.78 450 + 18.5 n ≤ 2 , 000 ⟹ 18.5 n ≤ 1 , 550 ⟹ n ≤ 18.5 1 , 550 ​ ≈ 83.78

Even though 83.78 83.78 83.78 is closer to 84 84 84 than 83 83 83 under standard rounding, you must round down to 83 students 83\text{ students} 83 students because 84 students 84\text{ students} 84 students would cost 450 + 18.5 ( 84 ) = 2,004 450 + 18.5(84) = 2{,}004 450 + 18.5 ( 84 ) = 2 , 004 ($2,004), violating the $2,000 budget limit.

Linear Number Patterns and Tables of Values ( T n = m n + c T_n = mn + c T n ​ = mn + c )

A sequence or table of values is linear (arithmetic) when the output changes by a constant first difference m m m every time the step number n n n increases by 1 1 1 . The general rule for the n th n\text{th} n th term is: T n = m n + c T_n = mn + c T n ​ = mn + c

where:

m m m is the constant step change ( T 2 − T 1 T_2 - T_1 T 2 ​ − T 1 ​ , or Δ T Δ n \frac{\Delta T}{\Delta n} Δ n Δ T ​ when table entries skip steps), and

c = T 1 − m c = T_1 - m c = T 1 ​ − m is the starting constant at n = 0 n = 0 n = 0 (the zero term) .

Critical Pattern Trap: Never plug the first term T 1 T_1 T 1 ​ directly in as c c c without subtracting m m m first!

Worked Example 2: Hexagonal Reading Tables Pattern

A school library places hexagonal tables end-to-end in a single row. 1 table 1\text{ table} 1 table seats 6 students 6\text{ students} 6 students , 2 joined tables 2\text{ joined tables} 2 joined tables seat 10 students 10\text{ students} 10 students , and 3 joined tables 3\text{ joined tables} 3 joined tables seat 14 students 14\text{ students} 14 students . Find the rule for the number of seats S n S_n S n ​ at n n n joined tables, and determine how many tables are required to seat 50 students 50\text{ students} 50 students .

Find the constant first difference m m m : Each new table adds 10 − 6 = 4 seats 10 - 6 = 4\text{ seats} 10 − 6 = 4 seats , so m = 4 m = 4 m = 4 .

Find the zero term c c c : Step back from n = 1 n = 1 n = 1 ( S 1 = 6 S_1 = 6 S 1 ​ = 6 ) to n = 0 n = 0 n = 0 : c = 6 − 4 = 2 c = 6 - 4 = 2 c = 6 − 4 = 2 (physically representing the 2 2 2 end seats at the far left and far right of the row). Thus: S n = 4 n + 2 S_n = 4n + 2 S n ​ = 4 n + 2

Solve for S n = 50 S_n = 50 S n ​ = 50 : 4 n + 2 = 50 ⟹ 4 n = 48 ⟹ n = 12 tables 4n + 2 = 50 \implies 4n = 48 \implies n = 12\text{ tables} 4 n + 2 = 50 ⟹ 4 n = 48 ⟹ n = 12 tables .

Algebraic Problem Type Symbolic Form Solution / Rule Context Rounding

Formula Substitution y = f ( x , z ) y = f(x, z) y = f ( x , z ) Evaluate brackets and powers before × / ÷ \times / \div × / ÷ and + / − + / - + / − Round to requested decimal place

Equal-Cost Comparison a 1 n + b 1 = a 2 n + b 2 a_1 n + b_1 = a_2 n + b_2 a 1 ​ n + b 1 ​ = a 2 ​ n + b 2 ​ n = b 2 − b 1 a 1 − a 2 n = \frac{b_2 - b_1}{a_1 - a_2} n = a 1 ​ − a 2 ​ b 2 ​ − b 1 ​ ​ Exact crossover point

Maximum Budget Cap F + r n ≤ K F + rn \le K F + r n ≤ K n ≤ K − F r n \le \frac{K - F}{r} n ≤ r K − F ​ Round down ( ⌊ n ⌋ \lfloor n \rfloor ⌊ n ⌋ ) to stay within budget

Minimum Target / Break-Even p n − ( F + v n ) ≥ Π pn - (F + vn) \ge \Pi p n − ( F + v n ) ≥ Π n ≥ F + Π p − v n \ge \frac{F + \Pi}{p - v} n ≥ p − v F + Π ​ Round up ( ⌈ n ⌉ \lceil n \rceil ⌈ n ⌉ ) to meet target

Linear Sequence ( n th n\text{th} n th Term) T n = m n + c T_n = mn + c T n ​ = mn + c m = T 2 − T 1 m = T_2 - T_1 m = T 2 ​ − T 1 ​ and c = T 1 − m c = T_1 - m c = T 1 ​ − m Verify rule at n = 1 n = 1 n = 1 and n = 2 n = 2 n = 2

Loading diagram... Translating Word Problems into Linear Models and Context-Based Rounding