Study guide
5.3 Simple Interest, Compound Growth, Depreciation, and Repayment Comparisons
LANTITE Numeracy Component Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Introduction, Test Structure & ACER Assessment Framework
1.1 LANTITE Numeracy Test Structure, Timing, and Administration 1.2 The ACER Assessment Framework: Contexts, Processes, and Performance Bands 1.3 Calculator-Available vs. Non-Calculator Strategy and Item Formats
2 Chapter 2: Number & Algebra I — Whole Numbers, Place Value, Integers, and Index Laws
2.1 Place Value, Rounding, Significant Figures, and Magnitude 2.2 Multi-Step Whole-Number Operations, Remainders, and Resource Allocation 2.3 Directed Numbers (Integers), Order of Operations, and Inverse Operations 2.4 Powers, Square Roots, Powers of Ten, and Scientific Notation
3 Chapter 3: Number & Algebra II — Fractions, Decimals, and Percentages
3.1 Fractions: Equivalence, Simplification, Comparison, and Operations 3.2 Decimals: Operations, Terminating and Recurring Decimals, and Equivalence 3.3 Percentages: Finding Percentages and Expressing Quantities as Percentages 3.4 Percentage Change, Discounts, Successive Changes, and Reverse Percentages
4 Chapter 4: Number & Algebra III — Ratios, Rates, Proportion, and Weighted Averages
4.1 Ratios, Simplification, Part-to-Part vs. Part-to-Whole, and Proportional Sharing 4.2 Rates, Unit Pricing, Fuel Consumption, and Speed–Distance–Time 4.3 Direct and Inverse Proportion, Currency Exchange, and Scaling 4.4 Weighted Averages, Assessment Gradebooks, and Combined Group Means
5 Chapter 5: Number & Algebra IV — Financial Numeracy, GST, Budgeting, and Algebraic Reasoning
5.1 Australian GST (10%), Pre-GST and Post-GST Prices, and Tiered Tax Tables 5.2 Personal and School Budgeting, Pay Rates, Utilities, and Break-Even Analysis 5.3 Simple Interest, Compound Growth, Depreciation, and Repayment Comparisons 5.4 Substituting into Formulae, Linear Equations, and Number Patterns
6 Chapter 6: Measurement & Geometry I — Metric Units, Perimeter, Area, Volume, and Time
6.1 Metric Units, Prefixes, Scale Reading, and Squared/Cubed Unit Conversions 6.2 Perimeter and Area of Rectangles, Triangles, Circles, and Composite 2D Shapes 6.3 Volume, Surface Area, Capacity, and Packing Problems 6.4 Elapsed Time, 12/24-Hour Timetables, School Bell Schedules, and Australian Time Zones
7 Chapter 7: Measurement & Geometry II — Spatial Reasoning, Angles, Scale Plans, and Navigation
7.1 Angle Properties, Polygons, Similar Figures, Symmetry, and Transformations 7.2 3D Solids, Nets, Faces/Edges/Vertices, and Orthographic Projections 7.3 Scale Drawings, Classroom Floor Plans, Map Ratios, and Area Scaling 7.4 Grid References, Coordinates, GPS Data, Compass Directions, and Bearings
8 Chapter 8: Statistics & Probability I — Reading and Interpreting Tables, Graphs, and Data Displays
8.1 Two-Way Contingency Tables, Relative Frequencies, and Venn Diagrams 8.2 Clustered and Stacked Bar Charts, Pie Charts, and Dual-Axis Line Graphs 8.3 Histograms, Cumulative Frequency, Stem-and-Leaf Plots, and Dot Plots 8.4 Scatterplots, Trend Lines, Bubble Charts, and Correlation vs. Causation
9 Chapter 9: Statistics & Probability II — Measures of Centre, Spread, Box Plots, and NAPLAN Data
9.1 Mean, Median, Mode, Frequency Table Averages, and the Effect of Outliers 9.2 Range, Quartiles, Interquartile Range (IQR), and Comparing Parallel Box Plots 9.3 Interpreting NAPLAN Displays, Proficiency Levels, Percentiles, and Standardised Scores
10 Chapter 10: Statistics & Probability III — Probability, Conditional Chance, and Evaluating Statistical Claims
10.1 Theoretical vs. Experimental Probability, Complementary Events, and Expected Frequency 10.2 Multi-Stage Events, Tree Diagrams, Replacement vs. Non-Replacement, and Conditional Probability 10.3 Sampling Bias, Misleading Graphs, Base-Rate Fallacies, and Evaluating Media/Research Claims
11 Chapter 11: Section 2 Mastery — Non-Calculator Mental Strategies, Estimation, and Verification
11.1 Mental Addition, Subtraction, Multiplication, and Division Strategies 11.2 Non-Calculator Benchmark Percentages, Fractional Shortcuts, and Decimal Scaling 11.3 Leading-Digit Estimation, Upper/Lower Bounds, Units Analysis, and Final Verification
5.3 Simple Interest, Compound Growth, Depreciation, and Repayment Comparisons
Key Takeaways Explain This Topic AI
In the simple interest formula I = Prt, the interest rate r and time period t must use matching time units (for example, an annual rate requires time in years, so m months equals m/12 years).
Compound interest A = P(1 + r)^n calculates interest on the growing balance each period, producing higher returns than simple interest for any duration longer than one compounding period.
Straight-line depreciation subtracts a constant dollar amount each year, whereas declining-balance depreciation V = P(1 - r)^n multiplies the remaining book value by (1 - r) each year.
To evaluate a hire-purchase or instalment plan, add the deposit to all periodic repayments (Deposit + n x Repayment) and subtract the upfront cash price to find the effective extra cost.
When an upfront cash option includes a percentage discount, compare the instalment plan against the discounted cash price if asked how much a buyer saves by paying upfront.
Last updated: October 2026
Simple Interest and Time-Unit Matching
Simple interest is calculated solely on the original principal amount P P P invested or borrowed. The dollar amount of interest earned or charged per period remains constant throughout the entire term: I = P × r × t I = P \times r \times t I = P × r × t
The total accumulated amount (maturity value or total repayment) A A A at the end of the term is the principal plus the interest: A = P + I = P ( 1 + r t ) A = P + I = P(1 + rt) A = P + I = P ( 1 + r t )
where:
P P P is the initial principal (in dollars),
r r r is the interest rate per period expressed as a decimal (e.g., 6 % p.a. = 0.06 6\%\text{ p.a.} = 0.06 6% p.a. = 0.06 ), and
t t t is the length of time expressed in the exact same time unit as r r r .
Matching Rate and Time Units and Rearranging I = P r t I = Prt I = P r t
Most LANTITE questions quote interest rates per annum ( p.a. \text{p.a.} p.a. , meaning per year) while giving the investment duration in months or days . Before multiplying, convert the time t t t into years:
For m months m\text{ months} m months , write t = m 12 years t = \frac{m}{12}\text{ years} t = 12 m years (e.g., 3 months = 0.25 years 3\text{ months} = 0.25\text{ years} 3 months = 0.25 years , 6 months = 0.5 years 6\text{ months} = 0.5\text{ years} 6 months = 0.5 years , 8 months = 2 3 years 8\text{ months} = \frac{2}{3}\text{ years} 8 months = 3 2 years , 9 months = 0.75 years 9\text{ months} = 0.75\text{ years} 9 months = 0.75 years , and 18 months = 1.5 years 18\text{ months} = 1.5\text{ years} 18 months = 1.5 years ).
You can also rearrange I = P r t I = Prt I = P r t to solve for any missing variable: P = I r t P = \frac{I}{rt} P = r t I , r = I P t r = \frac{I}{Pt} r = Pt I , or t = I P r t = \frac{I}{Pr} t = P r I . For example, if a $5,000 investment earns $450 simple interest over 2 years 2\text{ years} 2 years , the annual interest rate is r = 450 5,000 × 2 = 450 10,000 = 0.045 = 4.5 % p.a. r = \frac{450}{5{,}000 \times 2} = \frac{450}{10{,}000} = 0.045 = 4.5\%\text{ p.a.} r = 5 , 000 × 2 450 = 10 , 000 450 = 0.045 = 4.5% p.a.
Worked Example 1: Simple Interest on a Short-Term Deposit
A school P&C association invests $16,000 of building-fund reserves in a term deposit paying 4.5 % p.a. 4.5\%\text{ p.a.} 4.5% p.a. simple interest for 8 months 8\text{ months} 8 months . How much interest is earned, and what is the total maturity value?
Convert rate and time to matching annual units: r = 4.5 % = 0.045 per year r = 4.5\% = 0.045\text{ per year} r = 4.5% = 0.045 per year , and t = 8 12 = 2 3 years t = \frac{8}{12} = \frac{2}{3}\text{ years} t = 12 8 = 3 2 years .
Calculate simple interest: I = 16,000 × 0.045 × 2 3 = 720 × 2 3 = 480 I = 16{,}000 \times 0.045 \times \frac{2}{3} = 720 \times \frac{2}{3} = 480 I = 16 , 000 × 0.045 × 3 2 = 720 × 3 2 = 480
The term deposit earns $480 in interest.
3. Find total maturity value: A = 16,000 + 480 = 16,480 A = 16{,}000 + 480 = 16{,}480 A = 16 , 000 + 480 = 16 , 480 , or $16,480.
Compound Interest and Multi-Period Growth
Under compound interest , the interest earned at the end of each period is added to the principal, so that in every subsequent period you earn interest on your accumulated interest . After n n n compounding periods at a rate r r r per period, the total balance A A A and total compound interest I I I are: A = P ( 1 + r ) n and I = A − P A = P(1 + r)^n \quad \text{and} \quad I = A - P A = P ( 1 + r ) n and I = A − P
On LANTITE, compound growth questions typically span 2 2 2 or 3 3 3 periods and can be evaluated either by multiplying by ( 1 + r ) (1 + r) ( 1 + r ) step by step or by raising the growth factor ( 1 + r ) (1 + r) ( 1 + r ) to the power n n n .
Worked Example 2: Simple vs. Compound Interest Over 3 Years
Compare $10,000 invested for 3 years 3\text{ years} 3 years at 5 % p.a. 5\%\text{ p.a.} 5% p.a. under simple interest versus annual compound interest.
Simple interest: Each year earns 0.05 × 10,000 = 500 0.05 \times 10{,}000 = 500 0.05 × 10 , 000 = 500 ($500). Over 3 years 3\text{ years} 3 years , I = 3 × 500 = 1,500 I = 3 \times 500 = 1{,}500 I = 3 × 500 = 1 , 500 ($1,500), giving a final balance of $11,500.00.
Compound interest (growth factor 1 + 0.05 = 1.05 1 + 0.05 = 1.05 1 + 0.05 = 1.05 ):
End of Year 1: 10,000 × 1.05 = 10,500.00 10{,}000 \times 1.05 = 10{,}500.00 10 , 000 × 1.05 = 10 , 500.00 , or $10,500.00 ($500.00 interest)
End of Year 2: 10,500 × 1.05 = 11,025.00 10{,}500 \times 1.05 = 11{,}025.00 10 , 500 × 1.05 = 11 , 025.00 , or $11,025.00 ($525.00 interest)
End of Year 3: 11,025 × 1.05 = 11,576.25 11{,}025 \times 1.05 = 11{,}576.25 11 , 025 × 1.05 = 11 , 576.25 , or $11,576.25 ($551.25 interest)
Comparison: Compound interest yields 11,576.25 − 11,500.00 = 76.25 11{,}576.25 - 11{,}500.00 = 76.25 11 , 576.25 − 11 , 500.00 = 76.25 ($76.25) more than simple interest.
Straight-Line vs. Declining-Balance Depreciation
Schools and businesses track the falling book value of equipment (such as laptops, buses, and printing presses) over time—a process called depreciation . Two models are tested:
Straight-line depreciation: The asset loses a constant dollar amount D D D (or a fixed percentage of its original purchase price P P P ) every year: V n = P − n D V_n = P - nD V n = P − n D
Declining-balance (compound) depreciation: The asset loses a fixed percentage r r r of its current book value at the start of each year, multiplying the value by the decay factor ( 1 − r ) (1 - r) ( 1 − r ) each period: V n = P ( 1 − r ) n V_n = P(1 - r)^n V n = P ( 1 − r ) n
Worked Example 3: Depreciating School Laptops Over 3 Years
A school purchases a fleet of laptops for $25,000. Compare the book value after 3 years 3\text{ years} 3 years at 20 % p.a. 20\%\text{ p.a.} 20% p.a. under both methods:
Method A (Straight-line at 20 % p.a. 20\%\text{ p.a.} 20% p.a. of original cost): Annual depreciation is 0.20 × 25,000 = 5,000 0.20 \times 25{,}000 = 5{,}000 0.20 × 25 , 000 = 5 , 000 , or $5,000 per year. After 3 years 3\text{ years} 3 years , V 3 = 25,000 − 3 ( 5,000 ) = 10,000 V_3 = 25{,}000 - 3(5{,}000) = 10{,}000 V 3 = 25 , 000 − 3 ( 5 , 000 ) = 10 , 000 ($10,000).
Method B (Declining-balance at 20 % p.a. 20\%\text{ p.a.} 20% p.a. ): Retaining 80 % 80\% 80% ( 1 − 0.20 = 0.80 1 - 0.20 = 0.80 1 − 0.20 = 0.80 ) of its value each year gives:
- End of Year 1: 25,000 × 0.80 = 20,000 25{,}000 \times 0.80 = 20{,}000 25 , 000 × 0.80 = 20 , 000 ($20,000)
- End of Year 2: 20,000 × 0.80 = 16,000 20{,}000 \times 0.80 = 16{,}000 20 , 000 × 0.80 = 16 , 000 ($16,000)
End of Year 3: 16,000 × 0.80 = 12,800 16{,}000 \times 0.80 = 12{,}800 16 , 000 × 0.80 = 12 , 800 , or $12,800 (directly 25,000 × 0.80 3 = 25,000 × 0.512 = 12,800 25{,}000 \times 0.80^3 = 25{,}000 \times 0.512 = 12{,}800 25 , 000 × 0.8 0 3 = 25 , 000 × 0.512 = 12 , 800 ).
Hire-Purchase and Payment Plan Comparisons
When buying expensive equipment, buyers often choose between paying upfront in cash or using a hire-purchase (instalment) plan consisting of an initial deposit plus n n n regular repayments: Total Instalment Price = Deposit + ( n × Periodic Repayment ) \text{Total Instalment Price} = \text{Deposit} + (n \times \text{Periodic Repayment}) Total Instalment Price = Deposit + ( n × Periodic Repayment ) Extra Cost (Effective Interest Paid) = Total Instalment Price − Upfront Cash Price \text{Extra Cost (Effective Interest Paid)} = \text{Total Instalment Price} - \text{Upfront Cash Price} Extra Cost (Effective Interest Paid) = Total Instalment Price − Upfront Cash Price
Always check whether the instalments are billed monthly ( 12 per year 12\text{ per year} 12 per year ) or fortnightly ( 26 per year 26\text{ per year} 26 per year ) over a multi-year contract.
Worked Example 4: Comparing Cash Discount vs. Monthly Instalments
A commercial 3D printer for a school STEM lab has a marked price of $3,200. The supplier offers a 5 % 5\% 5% discount for immediate upfront payment, OR a payment plan requiring a 15 % 15\% 15% deposit on the marked price plus 24 monthly repayments 24\text{ monthly repayments} 24 monthly repayments of $130. How much more does the payment plan cost than the discounted cash price?
Discounted upfront cash price: 3,200 × ( 1 − 0.05 ) = 3,200 × 0.95 = 3,040 3{,}200 \times (1 - 0.05) = 3{,}200 \times 0.95 = 3{,}040 3 , 200 × ( 1 − 0.05 ) = 3 , 200 × 0.95 = 3 , 040 ($3,040).
Payment plan total:
- Deposit: 0.15 × 3,200 = 480 0.15 \times 3{,}200 = 480 0.15 × 3 , 200 = 480 ($480)
- Instalments: 24 × 130 = 3,120 24 \times 130 = 3{,}120 24 × 130 = 3 , 120 ($3,120)
- Total paid on plan: 480 + 3,120 = 3,600 480 + 3{,}120 = 3{,}600 480 + 3 , 120 = 3 , 600 ($3,600)
Difference: The payment plan costs 3,600 − 3,040 = 560 3{,}600 - 3{,}040 = 560 3 , 600 − 3 , 040 = 560 ($560) more than the discounted upfront cash option (and $400 more than the $3,200 marked price).
Financial Model Formula Key Feature
Simple Interest A = P ( 1 + r t ) A = P(1 + rt) A = P ( 1 + r t ) Equal dollar interest P r Pr P r added each period
Compound Growth A = P ( 1 + r ) n A = P(1 + r)^n A = P ( 1 + r ) n Multiplies by ( 1 + r ) (1 + r) ( 1 + r ) each period (interest on interest)
Straight-Line Depreciation V n = P ( 1 − n r ) V_n = P(1 - nr) V n = P ( 1 − n r ) Equal dollar loss P r Pr P r subtracted each year
Declining-Balance Depreciation V n = P ( 1 − r ) n V_n = P(1 - r)^n V n = P ( 1 − r ) n Multiplies remaining book value by ( 1 − r ) (1 - r) ( 1 − r ) each year
Hire-Purchase Plan Total = Deposit + n × Repayment \text{Total} = \text{Deposit} + n \times \text{Repayment} Total = Deposit + n × Repayment Extra cost equals Total Instalment Price minus Cash Price