Study guide

3.2 Decimals: Operations, Terminating and Recurring Decimals, and Equivalence

LANTITE Numeracy Component Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Introduction, Test Structure & ACER Assessment Framework

1.1 LANTITE Numeracy Test Structure, Timing, and Administration 1.2 The ACER Assessment Framework: Contexts, Processes, and Performance Bands 1.3 Calculator-Available vs. Non-Calculator Strategy and Item Formats

2 Chapter 2: Number & Algebra I — Whole Numbers, Place Value, Integers, and Index Laws

2.1 Place Value, Rounding, Significant Figures, and Magnitude 2.2 Multi-Step Whole-Number Operations, Remainders, and Resource Allocation 2.3 Directed Numbers (Integers), Order of Operations, and Inverse Operations 2.4 Powers, Square Roots, Powers of Ten, and Scientific Notation

3 Chapter 3: Number & Algebra II — Fractions, Decimals, and Percentages

3.1 Fractions: Equivalence, Simplification, Comparison, and Operations 3.2 Decimals: Operations, Terminating and Recurring Decimals, and Equivalence 3.3 Percentages: Finding Percentages and Expressing Quantities as Percentages 3.4 Percentage Change, Discounts, Successive Changes, and Reverse Percentages

4 Chapter 4: Number & Algebra III — Ratios, Rates, Proportion, and Weighted Averages

4.1 Ratios, Simplification, Part-to-Part vs. Part-to-Whole, and Proportional Sharing 4.2 Rates, Unit Pricing, Fuel Consumption, and Speed–Distance–Time 4.3 Direct and Inverse Proportion, Currency Exchange, and Scaling 4.4 Weighted Averages, Assessment Gradebooks, and Combined Group Means

5 Chapter 5: Number & Algebra IV — Financial Numeracy, GST, Budgeting, and Algebraic Reasoning

5.1 Australian GST (10%), Pre-GST and Post-GST Prices, and Tiered Tax Tables 5.2 Personal and School Budgeting, Pay Rates, Utilities, and Break-Even Analysis 5.3 Simple Interest, Compound Growth, Depreciation, and Repayment Comparisons 5.4 Substituting into Formulae, Linear Equations, and Number Patterns

6 Chapter 6: Measurement & Geometry I — Metric Units, Perimeter, Area, Volume, and Time

6.1 Metric Units, Prefixes, Scale Reading, and Squared/Cubed Unit Conversions 6.2 Perimeter and Area of Rectangles, Triangles, Circles, and Composite 2D Shapes 6.3 Volume, Surface Area, Capacity, and Packing Problems 6.4 Elapsed Time, 12/24-Hour Timetables, School Bell Schedules, and Australian Time Zones

7 Chapter 7: Measurement & Geometry II — Spatial Reasoning, Angles, Scale Plans, and Navigation

7.1 Angle Properties, Polygons, Similar Figures, Symmetry, and Transformations 7.2 3D Solids, Nets, Faces/Edges/Vertices, and Orthographic Projections 7.3 Scale Drawings, Classroom Floor Plans, Map Ratios, and Area Scaling 7.4 Grid References, Coordinates, GPS Data, Compass Directions, and Bearings

8 Chapter 8: Statistics & Probability I — Reading and Interpreting Tables, Graphs, and Data Displays

8.1 Two-Way Contingency Tables, Relative Frequencies, and Venn Diagrams 8.2 Clustered and Stacked Bar Charts, Pie Charts, and Dual-Axis Line Graphs 8.3 Histograms, Cumulative Frequency, Stem-and-Leaf Plots, and Dot Plots 8.4 Scatterplots, Trend Lines, Bubble Charts, and Correlation vs. Causation

9 Chapter 9: Statistics & Probability II — Measures of Centre, Spread, Box Plots, and NAPLAN Data

9.1 Mean, Median, Mode, Frequency Table Averages, and the Effect of Outliers 9.2 Range, Quartiles, Interquartile Range (IQR), and Comparing Parallel Box Plots 9.3 Interpreting NAPLAN Displays, Proficiency Levels, Percentiles, and Standardised Scores

10 Chapter 10: Statistics & Probability III — Probability, Conditional Chance, and Evaluating Statistical Claims

10.1 Theoretical vs. Experimental Probability, Complementary Events, and Expected Frequency 10.2 Multi-Stage Events, Tree Diagrams, Replacement vs. Non-Replacement, and Conditional Probability 10.3 Sampling Bias, Misleading Graphs, Base-Rate Fallacies, and Evaluating Media/Research Claims

11 Chapter 11: Section 2 Mastery — Non-Calculator Mental Strategies, Estimation, and Verification

11.1 Mental Addition, Subtraction, Multiplication, and Division Strategies 11.2 Non-Calculator Benchmark Percentages, Fractional Shortcuts, and Decimal Scaling 11.3 Leading-Digit Estimation, Upper/Lower Bounds, Units Analysis, and Final Verification

3.2 Decimals: Operations, Terminating and Recurring Decimals, and Equivalence

Key Takeaways Explain This Topic AI

Order decimals by comparing digits from left to right (tenths, then hundredths, then thousandths) or by padding with trailing zeros so that 0.408 < 0.450 < 0.500 0.408 < 0.450 < 0.500 0.408 < 0.450 < 0.500 .

When multiplying decimals without a calculator, multiply the whole-number digits and place the decimal point so the product has the sum of the decimal places of the factors ( 0.06 × 0.4 = 0.024 0.06 \times 0.4 = 0.024 0.06 × 0.4 = 0.024 ).

Divide by a decimal by multiplying both dividend and divisor by the same power of 10 10 10 to make the divisor a whole number ( 14.4 ÷ 0.12 = 1440 ÷ 12 = 120 14.4 \div 0.12 = 1440 \div 12 = 120 14.4 ÷ 0.12 = 1440 ÷ 12 = 120 ).

Multiplying a positive number by a decimal between 0 0 0 and 1 1 1 produces a smaller value, whereas dividing by a decimal between 0 0 0 and 1 1 1 produces a larger value.

Memorise key fraction-to-decimal benchmarks, including eighths ( 1 8 = 0.125 , 3 8 = 0.375 , 5 8 = 0.625 , 7 8 = 0.875 \frac{1}{8} = 0.125, \frac{3}{8} = 0.375, \frac{5}{8} = 0.625, \frac{7}{8} = 0.875 8 1 ​ = 0.125 , 8 3 ​ = 0.375 , 8 5 ​ = 0.625 , 8 7 ​ = 0.875 ) and recurring thirds and sixths ( 1 3 = 0. 3 ˙ , 2 3 = 0. 6 ˙ , 1 6 = 0.1 6 ˙ \frac{1}{3} = 0.\dot{3}, \frac{2}{3} = 0.\dot{6}, \frac{1}{6} = 0.1\dot{6} 3 1 ​ = 0. 3 ˙ , 3 2 ​ = 0. 6 ˙ , 6 1 ​ = 0.1 6 ˙ ).

Last updated: October 2026

Decimals extend the base- 10 10 10 place-value system to parts of a whole using tenths ( 1 10 = 0.1 \frac{1}{10} = 0.1 10 1 ​ = 0.1 ), hundredths ( 1 100 = 0.01 \frac{1}{100} = 0.01 100 1 ​ = 0.01 ), thousandths ( 1 1000 = 0.001 \frac{1}{1000} = 0.001 1000 1 ​ = 0.001 ), and beyond. On the LANTITE Numeracy test, decimal items frequently assess whether you can perform non-calculator arithmetic accurately and avoid common place-value misconceptions.

Ordering Decimals of Different Lengths

A widespread misconception among school students—and a classic trap under exam time pressure—is the whole-number length misconception : assuming that a decimal with more digits after the decimal point is larger (falsely thinking 0.408 > 0.45 > 0.5 0.408 > 0.45 > 0.5 0.408 > 0.45 > 0.5 because 408 > 45 > 5 408 > 45 > 5 408 > 45 > 5 ).

In reality, place value decreases by a factor of 10 10 10 with each step to the right. To compare decimals reliably, pad each number with trailing zeros so all values have the same number of decimal places, then compare from left to right:

  • 0.408 = 408 1000 0.408 = \frac{408}{1000} 0.408 = 1000 408 ​
  • 0.45 = 0.450 = 450 1000 0.45 = 0.450 = \frac{450}{1000} 0.45 = 0.450 = 1000 450 ​
  • 0.5 = 0.500 = 500 1000 0.5 = 0.500 = \frac{500}{1000} 0.5 = 0.500 = 1000 500 ​

Comparing thousandths makes the true ascending order unmistakable: 0.408 < 0.45 < 0.5 0.408 < 0.45 < 0.5 0.408 < 0.45 < 0.5 . Be careful in athletics track events (such as a 100 m 100\text{ m} 100 m sprint), where the smallest time in seconds represents the fastest runner, versus field events (such as long jump), where the largest distance in metres wins.

  • Operations with Decimals Without a Calculator
  • Adding and Subtracting Decimals

Line up the decimal points vertically so that tenths sit directly beneath tenths, hundredths beneath hundredths, and thousandths beneath thousandths. Always insert trailing zeros when adding or subtracting decimals of different lengths so that every column has a visible digit.

Addition with ragged decimals: To add 12.8 + 4.075 + 0.96 12.8 + 4.075 + 0.96 12.8 + 4.075 + 0.96 , rewrite the sum with three decimal places as 12.800 + 4.075 + 0.960 = 17.835 12.800 + 4.075 + 0.960 = 17.835 12.800 + 4.075 + 0.960 = 17.835 .

Subtraction from a shorter decimal or whole number: If a relay swimmer finishes a leg in 48.76 seconds 48.76\text{ seconds} 48.76 seconds against a qualifying target of 54.2 seconds 54.2\text{ seconds} 54.2 seconds , pad 54.2 54.2 54.2 to 54.20 54.20 54.20 before subtracting: 54.20 − 48.76 = 5.44 seconds 54.20 - 48.76 = 5.44\text{ seconds} 54.20 − 48.76 = 5.44 seconds under the target. Similarly, change from a $20 note for a $13.45 book order is 20.00 − 13.45 = 6.55 20.00 - 13.45 = 6.55 20.00 − 13.45 = 6.55 , or $6.55.

Multiplying Decimals: Counting Total Decimal Places

When multiplying decimals in Section 2, do not line up the decimal points. Instead:

Ignore the decimal points and multiply the numbers as whole integers.

Count the total number of digits after the decimal point across both factors.

Place the decimal point in the product so that it has that exact total number of decimal places, inserting leading zeros if needed.

Consider the classic exam trap 0.06 × 0.4 0.06 \times 0.4 0.06 × 0.4 :

Multiply the non-zero integers: 6 × 4 = 24 6 \times 4 = 24 6 × 4 = 24 .

Count decimal places: 0.06 0.06 0.06 has 2 2 2 decimal places and 0.4 0.4 0.4 has 1 1 1 decimal place, giving a total of 2 + 1 = 3 2 + 1 = 3 2 + 1 = 3 decimal places.

Place the decimal point three places from the right: 0.024 0.024 0.024 (never 0.24 0.24 0.24 ).

Dividing by a Decimal

Long division directly by a decimal divisor is error-prone. Instead, write the division as a fraction and multiply both the dividend and the divisor by the same power of 10 10 10 ( 10 10 10 , 100 100 100 , or 1000 1000 1000 ) so that the divisor becomes a whole number. Because you scale numerator and denominator equally, the quotient does not change.

For example, to evaluate 14.4 ÷ 0.12 14.4 \div 0.12 14.4 ÷ 0.12 , multiply both numbers by 100 100 100 (shifting both decimal points two places to the right): 14.4 ÷ 0.12 = 14.4 × 100 0.12 × 100 = 1440 12 = 120 14.4 \div 0.12 = \frac{14.4 \times 100}{0.12 \times 100} = \frac{1440}{12} = 120 14.4 ÷ 0.12 = 0.12 × 100 14.4 × 100 ​ = 12 1440 ​ = 120

Notice that 14.4 14.4 14.4 becomes 1440 1440 1440 , not 144 144 144 , because shifting two places to the right requires appending a zero.

Trap: Why Dividing by a Decimal Between 0 0 0 and 1 1 1 Gives a Larger Result

Candidates often expect multiplication to make numbers larger and division to make numbers smaller. That intuition only holds when the multiplier or divisor is greater than 1 1 1 . When operating on a positive number N N N with a decimal d d d between 0 0 0 and 1 1 1 ( 0 < d < 1 0 < d < 1 0 < d < 1 ):

Multiplying ( N × d N \times d N × d ) produces a smaller result because you are taking only a proper fraction of N N N (for example, 15 × 0.2 = 3 15 \times 0.2 = 3 15 × 0.2 = 3 ).

Dividing ( N ÷ d N \div d N ÷ d ) produces a larger result because you are finding how many small fractional parts of size d d d fit into N N N (for example, 15 ÷ 0.2 = 150 ÷ 2 = 75 15 \div 0.2 = 150 \div 2 = 75 15 ÷ 0.2 = 150 ÷ 2 = 75 ).

  • Converting Between Fractions and Decimals
  • Terminating vs. Recurring Decimals

To convert any fraction a b \frac{a}{b} b a ​ to a decimal without a calculator, either scale the denominator to 10 10 10 , 100 100 100 , or 1000 1000 1000 , or divide the numerator by the denominator ( a ÷ b a \div b a ÷ b ) using short division with trailing zeros ( 3 ÷ 8 = 3.000 ÷ 8 = 0.375 3 \div 8 = 3.000 \div 8 = 0.375 3 ÷ 8 = 3.000 ÷ 8 = 0.375 ).

A simplified fraction a b \frac{a}{b} b a ​ produces a terminating decimal if and only if the prime factorisation of its denominator b b b contains only 2 2 2 s and 5 5 5 s (since 10 = 2 × 5 10 = 2 \times 5 10 = 2 × 5 ). If the simplified denominator contains any other prime factor (such as 3 3 3 , 7 7 7 , or 11 11 11 ), the division never ends and produces a recurring (repeating) decimal , denoted by a dot above the repeating digit(s).

Fraction Family Benchmark Equivalences Decimal Type & Mental Anchor

Halves, Quarters, Fifths 1 2 = 0.5 \frac{1}{2} = 0.5 2 1 ​ = 0.5 , 1 4 = 0.25 \frac{1}{4} = 0.25 4 1 ​ = 0.25 , 3 4 = 0.75 \frac{3}{4} = 0.75 4 3 ​ = 0.75 , 1 5 = 0.2 \frac{1}{5} = 0.2 5 1 ​ = 0.2 , 4 5 = 0.8 \frac{4}{5} = 0.8 5 4 ​ = 0.8 Terminating: scale denominator to 10 10 10 or 100 100 100 .

Eighths 1 8 = 0.125 \frac{1}{8} = 0.125 8 1 ​ = 0.125 , 3 8 = 0.375 \frac{3}{8} = 0.375 8 3 ​ = 0.375 , 5 8 = 0.625 \frac{5}{8} = 0.625 8 5 ​ = 0.625 , 7 8 = 0.875 \frac{7}{8} = 0.875 8 7 ​ = 0.875 Terminating: 1 8 \frac{1}{8} 8 1 ​ is half of 1 4 \frac{1}{4} 4 1 ​ ( 0.25 ÷ 2 = 0.125 0.25 \div 2 = 0.125 0.25 ÷ 2 = 0.125 ); add multiples of 0.125 0.125 0.125 .

Thirds & Sixths 1 3 = 0. 3 ˙ \frac{1}{3} = 0.\dot{3} 3 1 ​ = 0. 3 ˙ , 2 3 = 0. 6 ˙ \frac{2}{3} = 0.\dot{6} 3 2 ​ = 0. 6 ˙ , 1 6 = 0.1 6 ˙ \frac{1}{6} = 0.1\dot{6} 6 1 ​ = 0.1 6 ˙ , 5 6 = 0.8 3 ˙ \frac{5}{6} = 0.8\dot{3} 6 5 ​ = 0.8 3 ˙ Recurring: 1 6 \frac{1}{6} 6 1 ​ is half of 1 3 \frac{1}{3} 3 1 ​ ( 0.333 … ÷ 2 = 0.166 … = 0.1 6 ˙ 0.333\ldots \div 2 = 0.166\ldots = 0.1\dot{6} 0.333 … ÷ 2 = 0.166 … = 0.1 6 ˙ ).

Ninths & Twentieths 1 9 = 0. 1 ˙ \frac{1}{9} = 0.\dot{1} 9 1 ​ = 0. 1 ˙ , 4 9 = 0. 4 ˙ \frac{4}{9} = 0.\dot{4} 9 4 ​ = 0. 4 ˙ , 1 20 = 0.05 \frac{1}{20} = 0.05 20 1 ​ = 0.05 , 7 20 = 0.35 \frac{7}{20} = 0.35 20 7 ​ = 0.35 k 9 = 0. k ˙ \frac{k}{9} = 0.\dot{k} 9 k ​ = 0. k ˙ (recurring); twentieths multiply numerator by 5 5 5 over 100 100 100 .

Converting Decimals Back to Simplified Fractions

To convert a terminating decimal to a fraction, read the place value of the final digit, write the digits over that power of 10 10 10 ( 10 10 10 for tenths, 100 100 100 for hundredths, 1000 1000 1000 for thousandths), and divide by the HCF: 0.625 = 625 1000 = 625 ÷ 125 1000 ÷ 125 = 5 8 , 0.045 = 45 1000 = 45 ÷ 5 1000 ÷ 5 = 9 200 0.625 = \frac{625}{1000} = \frac{625 \div 125}{1000 \div 125} = \frac{5}{8}, \qquad 0.045 = \frac{45}{1000} = \frac{45 \div 5}{1000 \div 5} = \frac{9}{200} 0.625 = 1000 625 ​ = 1000 ÷ 125 625 ÷ 125 ​ = 8 5 ​ , 0.045 = 1000 45 ​ = 1000 ÷ 5 45 ÷ 5 ​ = 200 9 ​

In Section 1 (Calculator), avoid rounding recurring decimals prematurely during multi-step calculations: if an intermediate step involves 1 3 \frac{1}{3} 3 1 ​ or 2 3 \frac{2}{3} 3 2 ​ of a budget, multiply by 1 1 1 and divide by 3 3 3 (or multiply by 2 2 2 and divide by 3 3 3 ) rather than typing 0.33 0.33 0.33 or 0.67 0.67 0.67 , which introduces rounding error.