Study guide
7.2 3D Solids, Nets, Faces/Edges/Vertices, and Orthographic Projections
LANTITE Numeracy Component Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Introduction, Test Structure & ACER Assessment Framework
1.1 LANTITE Numeracy Test Structure, Timing, and Administration 1.2 The ACER Assessment Framework: Contexts, Processes, and Performance Bands 1.3 Calculator-Available vs. Non-Calculator Strategy and Item Formats
2 Chapter 2: Number & Algebra I — Whole Numbers, Place Value, Integers, and Index Laws
2.1 Place Value, Rounding, Significant Figures, and Magnitude 2.2 Multi-Step Whole-Number Operations, Remainders, and Resource Allocation 2.3 Directed Numbers (Integers), Order of Operations, and Inverse Operations 2.4 Powers, Square Roots, Powers of Ten, and Scientific Notation
3 Chapter 3: Number & Algebra II — Fractions, Decimals, and Percentages
3.1 Fractions: Equivalence, Simplification, Comparison, and Operations 3.2 Decimals: Operations, Terminating and Recurring Decimals, and Equivalence 3.3 Percentages: Finding Percentages and Expressing Quantities as Percentages 3.4 Percentage Change, Discounts, Successive Changes, and Reverse Percentages
4 Chapter 4: Number & Algebra III — Ratios, Rates, Proportion, and Weighted Averages
4.1 Ratios, Simplification, Part-to-Part vs. Part-to-Whole, and Proportional Sharing 4.2 Rates, Unit Pricing, Fuel Consumption, and Speed–Distance–Time 4.3 Direct and Inverse Proportion, Currency Exchange, and Scaling 4.4 Weighted Averages, Assessment Gradebooks, and Combined Group Means
5 Chapter 5: Number & Algebra IV — Financial Numeracy, GST, Budgeting, and Algebraic Reasoning
5.1 Australian GST (10%), Pre-GST and Post-GST Prices, and Tiered Tax Tables 5.2 Personal and School Budgeting, Pay Rates, Utilities, and Break-Even Analysis 5.3 Simple Interest, Compound Growth, Depreciation, and Repayment Comparisons 5.4 Substituting into Formulae, Linear Equations, and Number Patterns
6 Chapter 6: Measurement & Geometry I — Metric Units, Perimeter, Area, Volume, and Time
6.1 Metric Units, Prefixes, Scale Reading, and Squared/Cubed Unit Conversions 6.2 Perimeter and Area of Rectangles, Triangles, Circles, and Composite 2D Shapes 6.3 Volume, Surface Area, Capacity, and Packing Problems 6.4 Elapsed Time, 12/24-Hour Timetables, School Bell Schedules, and Australian Time Zones
7 Chapter 7: Measurement & Geometry II — Spatial Reasoning, Angles, Scale Plans, and Navigation
7.1 Angle Properties, Polygons, Similar Figures, Symmetry, and Transformations 7.2 3D Solids, Nets, Faces/Edges/Vertices, and Orthographic Projections 7.3 Scale Drawings, Classroom Floor Plans, Map Ratios, and Area Scaling 7.4 Grid References, Coordinates, GPS Data, Compass Directions, and Bearings
8 Chapter 8: Statistics & Probability I — Reading and Interpreting Tables, Graphs, and Data Displays
8.1 Two-Way Contingency Tables, Relative Frequencies, and Venn Diagrams 8.2 Clustered and Stacked Bar Charts, Pie Charts, and Dual-Axis Line Graphs 8.3 Histograms, Cumulative Frequency, Stem-and-Leaf Plots, and Dot Plots 8.4 Scatterplots, Trend Lines, Bubble Charts, and Correlation vs. Causation
9 Chapter 9: Statistics & Probability II — Measures of Centre, Spread, Box Plots, and NAPLAN Data
9.1 Mean, Median, Mode, Frequency Table Averages, and the Effect of Outliers 9.2 Range, Quartiles, Interquartile Range (IQR), and Comparing Parallel Box Plots 9.3 Interpreting NAPLAN Displays, Proficiency Levels, Percentiles, and Standardised Scores
10 Chapter 10: Statistics & Probability III — Probability, Conditional Chance, and Evaluating Statistical Claims
10.1 Theoretical vs. Experimental Probability, Complementary Events, and Expected Frequency 10.2 Multi-Stage Events, Tree Diagrams, Replacement vs. Non-Replacement, and Conditional Probability 10.3 Sampling Bias, Misleading Graphs, Base-Rate Fallacies, and Evaluating Media/Research Claims
11 Chapter 11: Section 2 Mastery — Non-Calculator Mental Strategies, Estimation, and Verification
11.1 Mental Addition, Subtraction, Multiplication, and Division Strategies 11.2 Non-Calculator Benchmark Percentages, Fractional Shortcuts, and Decimal Scaling 11.3 Leading-Digit Estimation, Upper/Lower Bounds, Units Analysis, and Final Verification
7.2 3D Solids, Nets, Faces/Edges/Vertices, and Orthographic Projections
Key Takeaways Explain This Topic AI
An n n n -gonal prism has F = n + 2 F = n + 2 F = n + 2 faces, V = 2 n V = 2n V = 2 n vertices, and E = 3 n E = 3n E = 3 n edges, whereas an n n n -gonal pyramid has F = n + 1 F = n + 1 F = n + 1 faces, V = n + 1 V = n + 1 V = n + 1 vertices, and E = 2 n E = 2n E = 2 n edges.
Every convex polyhedron satisfies Euler's formula: F + V − E = 2 F + V - E = 2 F + V − E = 2 (or F + V = E + 2 F + V = E + 2 F + V = E + 2 ).
On any valid 2D net of a cube, two squares separated by one intermediate square in a straight row or column always fold to become opposite faces and never share an edge.
Orthographic projections display a 3D object from standard perpendicular viewpoints: the top (plan) view shows the horizontal footprint, the front/back views show column heights, and the left/right side views show row heights.
When counting unit cubes in an isometric block display, count systematically by horizontal layers or by writing the stack height inside each square of the top-view footprint.
Last updated: October 2026
Classifying 3D Solids: Prisms, Pyramids, and Curved Solids
Spatial reasoning items frequently test the structural properties of three-dimensional objects used in geometry models, packaging, and school architecture. Polyhedra (solids bounded entirely by flat polygon faces) fall into two main families:
Prisms: Have two congruent, parallel polygon bases (giving a uniform cross-section along their length) connected by rectangular lateral faces . A prism is named after the shape of its polygon base (e.g., a triangular prism has two triangular ends and three rectangular sides). For a prism whose base is an n n n -sided polygon:
- Faces: F = n + 2 F = n + 2 F = n + 2 ( 2 2 2 bases plus n n n rectangular lateral faces)
- Vertices (corners): V = 2 n V = 2n V = 2 n ( n n n vertices on the top base and n n n on the bottom base)
Edges: E = 3 n E = 3n E = 3 n ( n n n edges on the top base, n n n on the bottom base, and n n n vertical/lateral edges connecting them)
Pyramids: Have one polygon base and triangular lateral faces that slant upward to meet at a single point called the apex . For a pyramid whose base is an n n n -sided polygon:
- Faces: F = n + 1 F = n + 1 F = n + 1 ( 1 1 1 base plus n n n triangular lateral faces)
- Vertices: V = n + 1 V = n + 1 V = n + 1 ( n n n base vertices plus 1 1 1 apex)
- Edges: E = 2 n E = 2n E = 2 n ( n n n base edges plus n n n slanted edges meeting at the apex)
Curved 3D Solids (Non-Polyhedra):
Cylinder: Bounded by 2 2 2 parallel circular flat faces and 1 1 1 curved lateral surface. Although it has a uniform circular cross-section like a prism, it is not a polyhedron because its wall is curved.
Cone: Bounded by 1 1 1 circular flat base and 1 1 1 curved surface tapering to 1 1 1 apex.
Sphere: Bounded by 1 1 1 continuous curved surface where every surface point is equidistant from the centre; it has 0 0 0 flat faces, 0 0 0 edges, and 0 0 0 vertices.
Euler's Formula for Polyhedra
For any convex polyhedron (every prism and pyramid), the number of faces ( F F F ), vertices ( V V V ), and edges ( E E E ) satisfies Euler's formula : F + V − E = 2 ⟺ F + V = E + 2 F + V - E = 2 \quad \Longleftrightarrow \quad F + V = E + 2 F + V − E = 2 ⟺ F + V = E + 2
For example, if a polyhedron has 7 7 7 faces and 10 10 10 vertices, you can immediately find its number of edges without visualising the entire solid: E = F + V − 2 = 7 + 10 − 2 = 15 E = F + V - 2 = 7 + 10 - 2 = 15 E = F + V − 2 = 7 + 10 − 2 = 15 edges (which corresponds to a pentagonal prism, where n = 5 n = 5 n = 5 ).
- 3D Solid Base Polygon ( n n n ) Flat Faces ( F F F ) Curved Surfaces Vertices ( V V V ) Edges ( E E E )
- Cube / Rectangular Prism Quadrilateral ( n = 4 n = 4 n = 4 ) 6 6 6 0 0 0 8 8 8 12 12 12
- Triangular Prism Triangle ( n = 3 n = 3 n = 3 ) 5 5 5 0 0 0 6 6 6 9 9 9
- Pentagonal Prism Pentagon ( n = 5 n = 5 n = 5 ) 7 7 7 0 0 0 10 10 10 15 15 15
- Hexagonal Prism Hexagon ( n = 6 n = 6 n = 6 ) 8 8 8 0 0 0 12 12 12 18 18 18
- Octagonal Prism Octagon ( n = 8 n = 8 n = 8 ) 10 10 10 0 0 0 16 16 16 24 24 24
- Triangular Pyramid (Tetrahedron) Triangle ( n = 3 n = 3 n = 3 ) 4 4 4 0 0 0 4 4 4 6 6 6
- Square Pyramid Square ( n = 4 n = 4 n = 4 ) 5 5 5 0 0 0 5 5 5 8 8 8
- Hexagonal Pyramid Hexagon ( n = 6 n = 6 n = 6 ) 7 7 7 0 0 0 7 7 7 12 12 12
- Cylinder Circle 2 2 2 1 1 1 0 0 0 2 2 2 (curved)
- Cone Circle 1 1 1 1 1 1 1 1 1 (apex) 1 1 1 (curved)
- Sphere None 0 0 0 1 1 1 0 0 0 0 0 0
- 2D Nets and Tracking Opposite Faces on a Cube
A net is a flat 2D pattern of polygons joined along shared edges that can be folded along its interior lines to enclose a 3D solid without any overlapping or missing faces.
Prism nets: Consist of a strip of n n n rectangles (which wrap around the lateral sides) with the two congruent n n n -gon bases attached to opposite sides of the rectangular strip. If both end polygons are attached to the same side of the strip, they will fold onto the same end and leave the opposite end open.
Cylinder and cone nets: A closed cylinder's net consists of 1 1 1 central rectangle (whose width equals the circle's circumference 2 π r 2\pi r 2 π r ) and 2 2 2 circles attached to opposite long edges. A closed cone's net consists of 1 1 1 circle attached to the curved arc of 1 1 1 circular sector (a wedge of a larger circle).
Pyramid nets: Consist of the single base polygon surrounded by n n n triangles (typically arranged like a star around the base edges).
Cube nets: There are 11 11 11 valid nets composed of 6 6 6 congruent squares:
1 – 4 – 1 1\text{–}4\text{–}1 1 – 4 – 1 family ( 6 6 6 nets): A central row of 4 4 4 squares (which wrap into a hollow tube) with 1 1 1 square on the top side and 1 1 1 square on the bottom side (forming the two end caps).
2 – 3 – 1 2\text{–}3\text{–}1 2 – 3 – 1 family ( 3 3 3 nets): Rows of 2 2 2 , 3 3 3 , and 1 1 1 squares.
2 – 2 – 2 2\text{–}2\text{–}2 2 – 2 – 2 staircase ( 1 1 1 net) and 3 – 3 3\text{–}3 3 – 3 step ( 1 1 1 net) .
Common invalid traps: Any arrangement containing 5 5 5 or 6 6 6 squares in a single straight line, any arrangement containing a 2 × 2 2 \times 2 2 × 2 block of four squares, or any 1 – 4 – 1 1\text{–}4\text{–}1 1 – 4 – 1 pattern where both end flaps sit on the same side of the 4 4 4 -square spine.
The Skip-One Rule for Opposite Faces on a Cube Net
Many spatial questions show a labelled net of a cube (with numbers, letters, or symbols on each square) and ask either which face is opposite a given face or which 3D perspective drawing is valid.
Rule 1 (Straight-line skip-one): Whenever three or more squares lie in a straight row or column on a net, two squares separated by exactly one square between them ( A − B − C A - B - C A − B − C ) fold to become opposite faces ( A A A is opposite C C C ) .
Rule 2 (Opposite faces never touch): Two opposite faces can never share an edge or be visible together in a standard three-face corner view of a cube.
Rule 3 (Process of elimination): Once you identify two pairs of opposite faces using the skip-one rule, the remaining two squares on the net are automatically the third pair of opposite faces.
Worked Example 1: Finding Opposite Faces on a Classroom Dice Net
A cube net is arranged in a cross ( 1 – 4 – 1 1\text{–}4\text{–}1 1 – 4 – 1 ): the horizontal row of four squares is labelled P, Q, R, S from left to right; a square labelled T is attached above Q , and a square labelled U is attached below R .
Along the horizontal row P – Q – R – S , skipping one square shows P is opposite R and Q is opposite S .
The two remaining squares are T and U , so T must be opposite U .
Therefore, if a 3D drawing shows faces P and R adjacent to each other, that drawing is impossible.
- Orthographic Views and Counting Stacked Cubes
- Orthographic Projections (Plan and Elevations)
Architects and design teachers represent 3D structures using flat 2D orthographic views taken from perpendicular lines of sight:
Top view (Plan view): Looking straight down from above. It shows which grid squares of the base footprint are occupied.
Front view (Front elevation): Looking horizontally from the front. Each column's height equals the tallest stack in that left-to-right column.
Back view: Looking horizontally from behind. Its silhouette is the horizontal mirror image (left-to-right reflection) of the front view.
Left side view and Right side view: Looking horizontally from the left or right. Each column's height equals the tallest stack in that front-to-back row, and the left and right views are horizontal mirror images of each other.
Worked Example 2: Elevations and Total Cube Count from a Plan Grid
A block tower sits on a 2 × 2 2 \times 2 2 × 2 base grid. Looking from above (top view), the column heights are: Front-Left = 1 = 1 = 1 , Front-Right = 3 = 3 = 3 , Back-Left = 2 = 2 = 2 , and Back-Right = 4 = 4 = 4 . What are the column heights seen in the Front view (from left to right) and the Left side view (from front to back), and how many unit cubes are in the tower?
Front view (left column vs. right column): The left column has heights 1 1 1 (front) and 2 2 2 (back), so its maximum height is max ( 1 , 2 ) = 2 \max(1, 2) = 2 max ( 1 , 2 ) = 2 . The right column has heights 3 3 3 (front) and 4 4 4 (back), so its maximum height is max ( 3 , 4 ) = 4 \max(3, 4) = 4 max ( 3 , 4 ) = 4 . Thus the Front view shows columns of height [ 2 , 4 ] [2, 4] [ 2 , 4 ] from left to right.
Left side view (back row on left vs. front row on right): Looking from the left side of the model, the back row is on the viewer's left with maximum height max ( 2 , 4 ) = 4 \max(2, 4) = 4 max ( 2 , 4 ) = 4 , and the front row is on the viewer's right with maximum height max ( 1 , 3 ) = 3 \max(1, 3) = 3 max ( 1 , 3 ) = 3 .
Total unit cubes: Sum the four vertical stacks: 1 + 3 + 2 + 4 = 10 1 + 3 + 2 + 4 = 10 1 + 3 + 2 + 4 = 10 unit cubes.