Study guide

7.3 Scale Drawings, Classroom Floor Plans, Map Ratios, and Area Scaling

LANTITE Numeracy Component Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Introduction, Test Structure & ACER Assessment Framework

1.1 LANTITE Numeracy Test Structure, Timing, and Administration 1.2 The ACER Assessment Framework: Contexts, Processes, and Performance Bands 1.3 Calculator-Available vs. Non-Calculator Strategy and Item Formats

2 Chapter 2: Number & Algebra I — Whole Numbers, Place Value, Integers, and Index Laws

2.1 Place Value, Rounding, Significant Figures, and Magnitude 2.2 Multi-Step Whole-Number Operations, Remainders, and Resource Allocation 2.3 Directed Numbers (Integers), Order of Operations, and Inverse Operations 2.4 Powers, Square Roots, Powers of Ten, and Scientific Notation

3 Chapter 3: Number & Algebra II — Fractions, Decimals, and Percentages

3.1 Fractions: Equivalence, Simplification, Comparison, and Operations 3.2 Decimals: Operations, Terminating and Recurring Decimals, and Equivalence 3.3 Percentages: Finding Percentages and Expressing Quantities as Percentages 3.4 Percentage Change, Discounts, Successive Changes, and Reverse Percentages

4 Chapter 4: Number & Algebra III — Ratios, Rates, Proportion, and Weighted Averages

4.1 Ratios, Simplification, Part-to-Part vs. Part-to-Whole, and Proportional Sharing 4.2 Rates, Unit Pricing, Fuel Consumption, and Speed–Distance–Time 4.3 Direct and Inverse Proportion, Currency Exchange, and Scaling 4.4 Weighted Averages, Assessment Gradebooks, and Combined Group Means

5 Chapter 5: Number & Algebra IV — Financial Numeracy, GST, Budgeting, and Algebraic Reasoning

5.1 Australian GST (10%), Pre-GST and Post-GST Prices, and Tiered Tax Tables 5.2 Personal and School Budgeting, Pay Rates, Utilities, and Break-Even Analysis 5.3 Simple Interest, Compound Growth, Depreciation, and Repayment Comparisons 5.4 Substituting into Formulae, Linear Equations, and Number Patterns

6 Chapter 6: Measurement & Geometry I — Metric Units, Perimeter, Area, Volume, and Time

6.1 Metric Units, Prefixes, Scale Reading, and Squared/Cubed Unit Conversions 6.2 Perimeter and Area of Rectangles, Triangles, Circles, and Composite 2D Shapes 6.3 Volume, Surface Area, Capacity, and Packing Problems 6.4 Elapsed Time, 12/24-Hour Timetables, School Bell Schedules, and Australian Time Zones

7 Chapter 7: Measurement & Geometry II — Spatial Reasoning, Angles, Scale Plans, and Navigation

7.1 Angle Properties, Polygons, Similar Figures, Symmetry, and Transformations 7.2 3D Solids, Nets, Faces/Edges/Vertices, and Orthographic Projections 7.3 Scale Drawings, Classroom Floor Plans, Map Ratios, and Area Scaling 7.4 Grid References, Coordinates, GPS Data, Compass Directions, and Bearings

8 Chapter 8: Statistics & Probability I — Reading and Interpreting Tables, Graphs, and Data Displays

8.1 Two-Way Contingency Tables, Relative Frequencies, and Venn Diagrams 8.2 Clustered and Stacked Bar Charts, Pie Charts, and Dual-Axis Line Graphs 8.3 Histograms, Cumulative Frequency, Stem-and-Leaf Plots, and Dot Plots 8.4 Scatterplots, Trend Lines, Bubble Charts, and Correlation vs. Causation

9 Chapter 9: Statistics & Probability II — Measures of Centre, Spread, Box Plots, and NAPLAN Data

9.1 Mean, Median, Mode, Frequency Table Averages, and the Effect of Outliers 9.2 Range, Quartiles, Interquartile Range (IQR), and Comparing Parallel Box Plots 9.3 Interpreting NAPLAN Displays, Proficiency Levels, Percentiles, and Standardised Scores

10 Chapter 10: Statistics & Probability III — Probability, Conditional Chance, and Evaluating Statistical Claims

10.1 Theoretical vs. Experimental Probability, Complementary Events, and Expected Frequency 10.2 Multi-Stage Events, Tree Diagrams, Replacement vs. Non-Replacement, and Conditional Probability 10.3 Sampling Bias, Misleading Graphs, Base-Rate Fallacies, and Evaluating Media/Research Claims

11 Chapter 11: Section 2 Mastery — Non-Calculator Mental Strategies, Estimation, and Verification

11.1 Mental Addition, Subtraction, Multiplication, and Division Strategies 11.2 Non-Calculator Benchmark Percentages, Fractional Shortcuts, and Decimal Scaling 11.3 Leading-Digit Estimation, Upper/Lower Bounds, Units Analysis, and Final Verification

7.3 Scale Drawings, Classroom Floor Plans, Map Ratios, and Area Scaling

Key Takeaways Explain This Topic AI

A ratio scale of 1 : n 1 : n 1 : n is unitless and means 1 1 1 unit on the drawing represents n n n of the same units in the real world (e.g., at 1 : 200 1 : 200 1 : 200 , 1 cm 1\text{ cm} 1 cm represents 200 cm = 2 m 200\text{ cm} = 2\text{ m} 200 cm = 2 m ).

To convert 1 : n 1 : n 1 : n from centimetres to metres, divide n n n by 100 100 100 ; to convert from centimetres to kilometres, divide n n n by 100,000 100{,}000 100 , 000 .

Multiply drawing measurements by the scale factor to find real-world distances, and divide real-world distances by the scale factor (in matching units) to find drawing lengths.

When linear dimensions scale by a factor of k k k , area scales by k 2 k^2 k 2 ; always convert floor-plan lengths and widths into real-world metres before multiplying to find real-world area in m 2 \text{m}^2 m 2 .

Last updated: October 2026

Understanding Ratio Scales, Statement Scales, and Linear Scale Bars

Teachers interpret scale drawings when planning classroom furniture layouts, reading school master plans, and organising bushwalking or city excursions. A scale expresses the constant multiplicative ratio between a linear measurement on a plan or map and the corresponding real-world ground distance.

Scales are presented in three standard formats:

Ratio Scales ( 1 : n 1 : n 1 : n ): Both numbers share the same unit . A scale of 1 : 100 1 : 100 1 : 100 means 1 cm 1\text{ cm} 1 cm on the drawing represents 100 cm 100\text{ cm} 100 cm ( = 1 m = 1\text{ m} = 1 m ) in reality, and 1 mm 1\text{ mm} 1 mm on the drawing represents 100 mm 100\text{ mm} 100 mm ( = 0.1 m = 10 cm = 0.1\text{ m} = 10\text{ cm} = 0.1 m = 10 cm ) in reality.

Statement (Word) Scales: State the mixed-unit equivalence directly in words, such as " 1 cm represents 5 m 1\text{ cm represents }5\text{ m} 1 cm represents 5 m " or " 2 cm to 1 km 2\text{ cm to }1\text{ km} 2 cm to 1 km ".

Linear (Graphic) Scale Bars: A ruled visual bar printed on the map showing real-world distances. If a map is enlarged or reduced on a photocopier or projector screen, a printed ratio like 1 : 25,000 1 : 25{,}000 1 : 25 , 000 becomes invalid, whereas the linear scale bar shrinks or stretches at the exact same rate as the map and remains accurate.

Fast Metric Conversion Rules for Ratio Scales

Because 1 m = 100 cm 1\text{ m} = 100\text{ cm} 1 m = 100 cm and 1 km = 1,000 m = 100,000 cm 1\text{ km} = 1{,}000\text{ m} = 100{,}000\text{ cm} 1 km = 1 , 000 m = 100 , 000 cm , you can convert any 1 : n 1 : n 1 : n scale into a practical unit rate in seconds:

Centimetres to Metres: Divide n n n by 100 100 100 (move the decimal point 2 2 2 places left). At 1 : 250 1 : 250 1 : 250 , 1 cm 1\text{ cm} 1 cm on the plan represents 2.5 m 2.5\text{ m} 2.5 m .

Centimetres to Kilometres: Divide n n n by 100,000 100{,}000 100 , 000 (move the decimal point 5 5 5 places left). At 1 : 50,000 1 : 50{,}000 1 : 50 , 000 , 1 cm 1\text{ cm} 1 cm on the map represents 0.5 km 0.5\text{ km} 0.5 km ( 500 m 500\text{ m} 500 m ).

Ratio Scale 1 cm 1\text{ cm} 1 cm on Plan/Map Represents 1 mm 1\text{ mm} 1 mm on Plan/Map Represents Typical School Context

1 : 50 1 : 50 1 : 50 50 cm = 0.5 m 50\text{ cm} = 0.5\text{ m} 50 cm = 0.5 m 5 cm = 0.05 m 5\text{ cm} = 0.05\text{ m} 5 cm = 0.05 m Detailed classroom joinery and desk layout

1 : 100 1 : 100 1 : 100 100 cm = 1 m 100\text{ cm} = 1\text{ m} 100 cm = 1 m 10 cm = 0.1 m 10\text{ cm} = 0.1\text{ m} 10 cm = 0.1 m Architectural building floor plan

1 : 200 1 : 200 1 : 200 200 cm = 2 m 200\text{ cm} = 2\text{ m} 200 cm = 2 m 20 cm = 0.2 m 20\text{ cm} = 0.2\text{ m} 20 cm = 0.2 m School gymnasium and quadrangle plan

1 : 500 1 : 500 1 : 500 500 cm = 5 m 500\text{ cm} = 5\text{ m} 500 cm = 5 m 50 cm = 0.5 m 50\text{ cm} = 0.5\text{ m} 50 cm = 0.5 m Whole-campus site and evacuation map

1 : 10,000 1 : 10{,}000 1 : 10 , 000 100 m = 0.1 km 100\text{ m} = 0.1\text{ km} 100 m = 0.1 km 10 m 10\text{ m} 10 m Local suburb street and cross-country map

1 : 25,000 1 : 25{,}000 1 : 25 , 000 250 m = 0.25 km 250\text{ m} = 0.25\text{ km} 250 m = 0.25 km 25 m 25\text{ m} 25 m Topographic bushwalking excursion map

1 : 50,000 1 : 50{,}000 1 : 50 , 000 500 m = 0.5 km 500\text{ m} = 0.5\text{ km} 500 m = 0.5 km 50 m 50\text{ m} 50 m Regional national park map

1 : 250,000 1 : 250{,}000 1 : 250 , 000 2,500 m = 2.5 km 2{,}500\text{ m} = 2.5\text{ km} 2 , 500 m = 2.5 km 250 m = 0.25 km 250\text{ m} = 0.25\text{ km} 250 m = 0.25 km Inter-city coach excursion highway map

  • Converting Between Map Distances, Ground Distances, and Travel Time
  • 1. From Drawing Measurement to Real-World Distance (Multiply)

First write down the unit equivalence for 1 cm 1\text{ cm} 1 cm (or 1 mm 1\text{ mm} 1 mm ), then multiply by the map measurement: Real-World Distance = ( Map Distance in cm ) × ( Real-World Distance per cm ) \text{Real-World Distance} = (\text{Map Distance in cm}) \times (\text{Real-World Distance per cm}) Real-World Distance = ( Map Distance in cm ) × ( Real-World Distance per cm )

2. From Real-World Distance to Drawing Measurement (Divide)

Divide the real-world length by the real-world distance represented by 1 cm 1\text{ cm} 1 cm : Drawing Length (cm) = Real-World Distance Real-World Distance per cm \text{Drawing Length (cm)} = \frac{\text{Real-World Distance}}{\text{Real-World Distance per cm}} Drawing Length (cm) = Real-World Distance per cm Real-World Distance ​

For example, if a 30 m 30\text{ m} 30 m swimming pool is drawn on a 1 : 200 1 : 200 1 : 200 campus plan (where 1 cm = 2 m 1\text{ cm} = 2\text{ m} 1 cm = 2 m ), its length on paper is 30 m 2 m/cm = 15 cm \frac{30\text{ m}}{2\text{ m/cm}} = 15\text{ cm} 2 m/cm 30 m ​ = 15 cm .

Worked Example 1: Bushwalking Excursion Distance and Arrival Time

A Year 9 outdoor education class uses a topographic map with a scale of 1 : 25,000 1 : 25{,}000 1 : 25 , 000 . The walking track from the picnic ground to the waterfall measures 18 cm 18\text{ cm} 18 cm along the trail on the map. If the group departs at 9 : 15 am 9\text{:}15\text{ am} 9 : 15 am , walks at an average speed of 3.6 km/h 3.6\text{ km/h} 3.6 km/h , and takes a 20 -minute 20\text{-minute} 20 -minute morning tea break along the way, at what time will they reach the waterfall?

Convert the ratio scale: At 1 : 25,000 1 : 25{,}000 1 : 25 , 000 , 1 cm 1\text{ cm} 1 cm represents 25,000 cm = 250 m = 0.25 km 25{,}000\text{ cm} = 250\text{ m} = 0.25\text{ km} 25 , 000 cm = 250 m = 0.25 km .

Find the real-world trail distance: d = 18 × 0.25 km = 4.5 km d = 18 \times 0.25\text{ km} = 4.5\text{ km} d = 18 × 0.25 km = 4.5 km

Find the walking time: Using t = d s t = \frac{d}{s} t = s d ​ : t = 4.5 km 3.6 km/h = 45 36 hours = 5 4 hours = 1.25 hours = 1 hour 15 minutes t = \frac{4.5\text{ km}}{3.6\text{ km/h}} = \frac{45}{36}\text{ hours} = \frac{5}{4}\text{ hours} = 1.25\text{ hours} = 1\text{ hour }15\text{ minutes} t = 3.6 km/h 4.5 km ​ = 36 45 ​ hours = 4 5 ​ hours = 1.25 hours = 1 hour 15 minutes

Add the rest stop and compute arrival time: Total elapsed time is 1 hour 15 minutes + 20 minutes = 1 hour 35 minutes 1\text{ hour }15\text{ minutes} + 20\text{ minutes} = 1\text{ hour }35\text{ minutes} 1 hour 15 minutes + 20 minutes = 1 hour 35 minutes . Starting from 9 : 15 am 9\text{:}15\text{ am} 9 : 15 am , the group arrives at 10 : 50 am 10\text{:}50\text{ am} 10 : 50 am .

Worked Example 2: Choosing the Largest Scale That Fits a Printable Page

A teacher wants to draw a scale plan of a rectangular school assembly quadrangle measuring 54 m 54\text{ m} 54 m long by 36 m 36\text{ m} 36 m wide inside a printable worksheet box measuring 28 cm 28\text{ cm} 28 cm wide by 19 cm 19\text{ cm} 19 cm high. Of the standard scales 1 : 100 1 : 100 1 : 100 , 1 : 200 1 : 200 1 : 200 , and 1 : 500 1 : 500 1 : 500 , which gives the largest drawing that fits completely inside the box?

Test 1 : 100 1 : 100 1 : 100 ( 1 cm = 1 m 1\text{ cm} = 1\text{ m} 1 cm = 1 m ): Drawing dimensions would be 54 cm × 36 cm 54\text{ cm} \times 36\text{ cm} 54 cm × 36 cm , which is too large for the 28 cm × 19 cm 28\text{ cm} \times 19\text{ cm} 28 cm × 19 cm box.

Test 1 : 200 1 : 200 1 : 200 ( 1 cm = 2 m 1\text{ cm} = 2\text{ m} 1 cm = 2 m ): Drawing length = 54 ÷ 2 = 27 cm = 54 \div 2 = 27\text{ cm} = 54 ÷ 2 = 27 cm ( ≤ 28 cm \le 28\text{ cm} ≤ 28 cm ) and drawing width = 36 ÷ 2 = 18 cm = 36 \div 2 = 18\text{ cm} = 36 ÷ 2 = 18 cm ( ≤ 19 cm \le 19\text{ cm} ≤ 19 cm ). Both dimensions fit with room to spare.

Therefore, 1 : 200 1 : 200 1 : 200 produces the largest drawing that fits inside the printable area.

The Area Scale Factor Trap: Scaling Linear Dimensions vs. Area

One of the most common numeracy errors occurs when candidates calculate an area in cm 2 \text{cm}^2 cm 2 on a floor plan and multiply by the linear scale factor k k k instead of k 2 k^2 k 2 .

When every linear dimension is multiplied by a scale factor k k k , area is multiplied by k 2 k^2 k 2 : Real-World Area = Drawing Area × k 2 \text{Real-World Area} = \text{Drawing Area} \times k^2 Real-World Area = Drawing Area × k 2

Consider a 1 cm × 1 cm 1\text{ cm} \times 1\text{ cm} 1 cm × 1 cm square ( 1 cm 2 1\text{ cm}^2 1 cm 2 ) on a 1 : 200 1 : 200 1 : 200 floor plan:

Each 1 cm 1\text{ cm} 1 cm side represents 2 m 2\text{ m} 2 m ( 200 cm 200\text{ cm} 200 cm ) in reality.

The real-world area of that 1 cm 2 1\text{ cm}^2 1 cm 2 square is 2 m × 2 m = 4 m 2 2\text{ m} \times 2\text{ m} = 4\text{ m}^2 2 m × 2 m = 4 m 2 (which equals 200 cm × 200 cm = 40,000 cm 2 200\text{ cm} \times 200\text{ cm} = 40{,}000\text{ cm}^2 200 cm × 200 cm = 40 , 000 cm 2 , not 200 cm 2 200\text{ cm}^2 200 cm 2 ).

Golden Rule for Floor-Plan Area Problems: Never compute area in cm 2 \text{cm}^2 cm 2 first. Always convert each linear length and width on the plan into real-world metres first , and then multiply the real-world metres together to obtain the area directly in m 2 \text{m}^2 m 2 .

Worked Example 3: Flooring Cost from a School Library Plan

On an architectural plan drawn at a scale of 1 : 200 1 : 200 1 : 200 , a rectangular school library measures 9.5 cm 9.5\text{ cm} 9.5 cm long by 6.0 cm 6.0\text{ cm} 6.0 cm wide. Commercial carpet tiles cost $40 per square metre ( m 2 \text{m}^2 m 2 ). What is the total cost to carpet the library floor?

Convert the linear dimensions to real-world metres first: At 1 : 200 1 : 200 1 : 200 , 1 cm 1\text{ cm} 1 cm represents 2 m 2\text{ m} 2 m .

Real-world length = 9.5 × 2 m = 19 m = 9.5 \times 2\text{ m} = 19\text{ m} = 9.5 × 2 m = 19 m .

Real-world width = 6.0 × 2 m = 12 m = 6.0 \times 2\text{ m} = 12\text{ m} = 6.0 × 2 m = 12 m .

Calculate the real-world floor area: Area = 19 m × 12 m = 228 m 2 \text{Area} = 19\text{ m} \times 12\text{ m} = 228\text{ m}^2 Area = 19 m × 12 m = 228 m 2

Calculate the carpeting cost: Cost = 228 × 40 = 9,120 dollars \text{Cost} = 228 \times 40 = 9{,}120\text{ dollars} Cost = 228 × 40 = 9 , 120 dollars